This commit is contained in:
Clebert Suconic 2021-03-22 19:12:06 -04:00
commit af7857e3d1
4 changed files with 543 additions and 0 deletions

View File

@ -707,6 +707,38 @@
<configuration>${basedir}/target/classes/servers/brokerConnectBridgeSecurityB</configuration> <configuration>${basedir}/target/classes/servers/brokerConnectBridgeSecurityB</configuration>
</configuration> </configuration>
</execution> </execution>
<!-- used on BrokerConnectionBridgeSecurityTest -->
<execution>
<phase>test-compile</phase>
<id>createBrokerConnectMirrorSecurityA</id>
<goals>
<goal>create</goal>
</goals>
<configuration>
<allowAnonymous>false</allowAnonymous>
<user>A</user>
<password>A</password>
<noWeb>true</noWeb>
<instance>${basedir}/target/brokerConnectMirrorSecurityA</instance>
<configuration>${basedir}/target/classes/servers/brokerConnectMirrorSecurityA</configuration>
</configuration>
</execution>
<execution>
<phase>test-compile</phase>
<id>createBrokerConnectMirrorSecurityB</id>
<goals>
<goal>create</goal>
</goals>
<configuration>
<allowAnonymous>false</allowAnonymous>
<user>B</user>
<password>B</password>
<noWeb>true</noWeb>
<portOffset>1</portOffset>
<instance>${basedir}/target/brokerConnectMirrorSecurityB</instance>
<configuration>${basedir}/target/classes/servers/brokerConnectMirrorSecurityB</configuration>
</configuration>
</execution>
</executions> </executions>
<dependencies> <dependencies>
<dependency> <dependency>

View File

@ -0,0 +1,216 @@
<?xml version='1.0'?>
<!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements. See the NOTICE file
distributed with this work for additional information
regarding copyright ownership. The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied. See the License for the
specific language governing permissions and limitations
under the License.
-->
<configuration xmlns="urn:activemq"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xi="http://www.w3.org/2001/XInclude"
xsi:schemaLocation="urn:activemq /schema/artemis-configuration.xsd">
<core xmlns="urn:activemq:core" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="urn:activemq:core ">
<name>0.0.0.0</name>
<persistence-enabled>false</persistence-enabled>
<!-- this could be ASYNCIO, MAPPED, NIO
ASYNCIO: Linux Libaio
MAPPED: mmap files
NIO: Plain Java Files
-->
<journal-type>NIO</journal-type>
<paging-directory>data/paging</paging-directory>
<bindings-directory>data/bindings</bindings-directory>
<journal-directory>data/journal</journal-directory>
<large-messages-directory>data/large-messages</large-messages-directory>
<journal-datasync>true</journal-datasync>
<journal-min-files>2</journal-min-files>
<journal-pool-files>10</journal-pool-files>
<journal-device-block-size>4096</journal-device-block-size>
<journal-file-size>10M</journal-file-size>
<!--
This value was determined through a calculation.
Your system could perform 25 writes per millisecond
on the current journal configuration.
That translates as a sync write every 40000 nanoseconds.
Note: If you specify 0 the system will perform writes directly to the disk.
We recommend this to be 0 if you are using journalType=MAPPED and journal-datasync=false.
-->
<journal-buffer-timeout>40000</journal-buffer-timeout>
<!--
When using ASYNCIO, this will determine the writing queue depth for libaio.
-->
<journal-max-io>1</journal-max-io>
<!--
You can verify the network health of a particular NIC by specifying the <network-check-NIC> element.
<network-check-NIC>theNicName</network-check-NIC>
-->
<!--
Use this to use an HTTP server to validate the network
<network-check-URL-list>http://www.apache.org</network-check-URL-list> -->
<!-- <network-check-period>10000</network-check-period> -->
<!-- <network-check-timeout>1000</network-check-timeout> -->
<!-- this is a comma separated list, no spaces, just DNS or IPs
it should accept IPV6
Warning: Make sure you understand your network topology as this is meant to validate if your network is valid.
Using IPs that could eventually disappear or be partially visible may defeat the purpose.
You can use a list of multiple IPs, and if any successful ping will make the server OK to continue running -->
<!-- <network-check-list>10.0.0.1</network-check-list> -->
<!-- use this to customize the ping used for ipv4 addresses -->
<!-- <network-check-ping-command>ping -c 1 -t %d %s</network-check-ping-command> -->
<!-- use this to customize the ping used for ipv6 addresses -->
<!-- <network-check-ping6-command>ping6 -c 1 %2$s</network-check-ping6-command> -->
<!-- how often we are looking for how many bytes are being used on the disk in ms -->
<disk-scan-period>5000</disk-scan-period>
<!-- once the disk hits this limit the system will block, or close the connection in certain protocols
that won't support flow control. -->
<max-disk-usage>90</max-disk-usage>
<!-- should the broker detect dead locks and other issues -->
<critical-analyzer>true</critical-analyzer>
<critical-analyzer-timeout>120000</critical-analyzer-timeout>
<critical-analyzer-check-period>60000</critical-analyzer-check-period>
<critical-analyzer-policy>HALT</critical-analyzer-policy>
<page-sync-timeout>40000</page-sync-timeout>
<acceptors>
<acceptor name="artemis">tcp://0.0.0.0:61616?tcpSendBufferSize=1048576;tcpReceiveBufferSize=1048576;amqpMinLargeMessageSize=102400;protocols=CORE,AMQP,STOMP,HORNETQ,MQTT,OPENWIRE;useEpoll=true;amqpCredits=1000;amqpLowCredits=300;amqpDuplicateDetection=true</acceptor>
</acceptors>
<broker-connections>
<amqp-connection uri="tcp://localhost:61617" name="outgoing" reconnect-attempts="-1" retry-interval="100" user="B" password="B">
<mirror/>
</amqp-connection>
</broker-connections>
<security-settings>
<security-setting match="#">
<permission type="createNonDurableQueue" roles="guest"/>
<permission type="deleteNonDurableQueue" roles="guest"/>
<permission type="createDurableQueue" roles="guest"/>
<permission type="deleteDurableQueue" roles="guest"/>
<permission type="createAddress" roles="guest"/>
<permission type="deleteAddress" roles="guest"/>
<permission type="consume" roles="guest"/>
<permission type="browse" roles="guest"/>
<permission type="send" roles="guest"/>
<!-- we need this otherwise ./artemis data imp wouldn't work -->
<permission type="manage" roles="guest"/>
</security-setting>
</security-settings>
<address-settings>
<!-- if you define auto-create on certain queues, management has to be auto-create -->
<address-setting match="activemq.management#">
<dead-letter-address>DLQ</dead-letter-address>
<expiry-address>ExpiryQueue</expiry-address>
<redelivery-delay>0</redelivery-delay>
<!-- with -1 only the global-max-size is in use for limiting -->
<max-size-bytes>-1</max-size-bytes>
<message-counter-history-day-limit>10</message-counter-history-day-limit>
<address-full-policy>PAGE</address-full-policy>
<auto-create-queues>true</auto-create-queues>
<auto-create-addresses>true</auto-create-addresses>
<auto-create-jms-queues>true</auto-create-jms-queues>
<auto-create-jms-topics>true</auto-create-jms-topics>
</address-setting>
<!--default for catch all-->
<address-setting match="#">
<dead-letter-address>DLQ</dead-letter-address>
<expiry-address>ExpiryQueue</expiry-address>
<redelivery-delay>0</redelivery-delay>
<!-- with -1 only the global-max-size is in use for limiting -->
<max-size-bytes>-1</max-size-bytes>
<message-counter-history-day-limit>10</message-counter-history-day-limit>
<address-full-policy>PAGE</address-full-policy>
<auto-create-queues>true</auto-create-queues>
<auto-create-addresses>true</auto-create-addresses>
<auto-create-jms-queues>true</auto-create-jms-queues>
<auto-create-jms-topics>true</auto-create-jms-topics>
</address-setting>
</address-settings>
<addresses>
<address name="DLQ">
<anycast>
<queue name="DLQ" />
</anycast>
</address>
<address name="ExpiryQueue">
<anycast>
<queue name="ExpiryQueue" />
</anycast>
</address>
<address name="someQueue">
<anycast>
<queue name="someQueue" />
</anycast>
</address>
</addresses>
<!-- Uncomment the following if you want to use the Standard LoggingActiveMQServerPlugin pluging to log in events
<broker-plugins>
<broker-plugin class-name="org.apache.activemq.artemis.core.server.plugin.impl.LoggingActiveMQServerPlugin">
<property key="LOG_ALL_EVENTS" value="true"/>
<property key="LOG_CONNECTION_EVENTS" value="true"/>
<property key="LOG_SESSION_EVENTS" value="true"/>
<property key="LOG_CONSUMER_EVENTS" value="true"/>
<property key="LOG_DELIVERING_EVENTS" value="true"/>
<property key="LOG_SENDING_EVENTS" value="true"/>
<property key="LOG_INTERNAL_EVENTS" value="true"/>
</broker-plugin>
</broker-plugins>
-->
</core>
</configuration>

View File

@ -0,0 +1,217 @@
<?xml version='1.0'?>
<!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements. See the NOTICE file
distributed with this work for additional information
regarding copyright ownership. The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied. See the License for the
specific language governing permissions and limitations
under the License.
-->
<configuration xmlns="urn:activemq"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xi="http://www.w3.org/2001/XInclude"
xsi:schemaLocation="urn:activemq /schema/artemis-configuration.xsd">
<core xmlns="urn:activemq:core" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="urn:activemq:core ">
<name>0.0.0.0</name>
<persistence-enabled>false</persistence-enabled>
<!-- this could be ASYNCIO, MAPPED, NIO
ASYNCIO: Linux Libaio
MAPPED: mmap files
NIO: Plain Java Files
-->
<journal-type>NIO</journal-type>
<paging-directory>data/paging</paging-directory>
<bindings-directory>data/bindings</bindings-directory>
<journal-directory>data/journal</journal-directory>
<large-messages-directory>data/large-messages</large-messages-directory>
<journal-datasync>true</journal-datasync>
<journal-min-files>2</journal-min-files>
<journal-pool-files>10</journal-pool-files>
<journal-device-block-size>4096</journal-device-block-size>
<journal-file-size>10M</journal-file-size>
<!--
This value was determined through a calculation.
Your system could perform 25 writes per millisecond
on the current journal configuration.
That translates as a sync write every 40000 nanoseconds.
Note: If you specify 0 the system will perform writes directly to the disk.
We recommend this to be 0 if you are using journalType=MAPPED and journal-datasync=false.
-->
<journal-buffer-timeout>40000</journal-buffer-timeout>
<!--
When using ASYNCIO, this will determine the writing queue depth for libaio.
-->
<journal-max-io>1</journal-max-io>
<!--
You can verify the network health of a particular NIC by specifying the <network-check-NIC> element.
<network-check-NIC>theNicName</network-check-NIC>
-->
<!--
Use this to use an HTTP server to validate the network
<network-check-URL-list>http://www.apache.org</network-check-URL-list> -->
<!-- <network-check-period>10000</network-check-period> -->
<!-- <network-check-timeout>1000</network-check-timeout> -->
<!-- this is a comma separated list, no spaces, just DNS or IPs
it should accept IPV6
Warning: Make sure you understand your network topology as this is meant to validate if your network is valid.
Using IPs that could eventually disappear or be partially visible may defeat the purpose.
You can use a list of multiple IPs, and if any successful ping will make the server OK to continue running -->
<!-- <network-check-list>10.0.0.1</network-check-list> -->
<!-- use this to customize the ping used for ipv4 addresses -->
<!-- <network-check-ping-command>ping -c 1 -t %d %s</network-check-ping-command> -->
<!-- use this to customize the ping used for ipv6 addresses -->
<!-- <network-check-ping6-command>ping6 -c 1 %2$s</network-check-ping6-command> -->
<!-- how often we are looking for how many bytes are being used on the disk in ms -->
<disk-scan-period>5000</disk-scan-period>
<!-- once the disk hits this limit the system will block, or close the connection in certain protocols
that won't support flow control. -->
<max-disk-usage>90</max-disk-usage>
<!-- should the broker detect dead locks and other issues -->
<critical-analyzer>true</critical-analyzer>
<critical-analyzer-timeout>120000</critical-analyzer-timeout>
<critical-analyzer-check-period>60000</critical-analyzer-check-period>
<critical-analyzer-policy>HALT</critical-analyzer-policy>
<page-sync-timeout>40000</page-sync-timeout>
<acceptors>
<acceptor name="artemis">tcp://0.0.0.0:61617?tcpSendBufferSize=1048576;tcpReceiveBufferSize=1048576;amqpMinLargeMessageSize=102400;protocols=CORE,AMQP,STOMP,HORNETQ,MQTT,OPENWIRE;useEpoll=true;amqpCredits=1000;amqpLowCredits=300;amqpDuplicateDetection=true</acceptor>
</acceptors>
<security-settings>
<security-setting match="#">
<permission type="createNonDurableQueue" roles="guest"/>
<permission type="deleteNonDurableQueue" roles="guest"/>
<permission type="createDurableQueue" roles="guest"/>
<permission type="deleteDurableQueue" roles="guest"/>
<permission type="createAddress" roles="guest"/>
<permission type="deleteAddress" roles="guest"/>
<permission type="consume" roles="guest"/>
<permission type="browse" roles="guest"/>
<permission type="send" roles="guest"/>
<!-- we need this otherwise ./artemis data imp wouldn't work -->
<permission type="manage" roles="guest"/>
</security-setting>
</security-settings>
<address-settings>
<!-- if you define auto-create on certain queues, management has to be auto-create -->
<address-setting match="activemq.management#">
<dead-letter-address>DLQ</dead-letter-address>
<expiry-address>ExpiryQueue</expiry-address>
<redelivery-delay>0</redelivery-delay>
<!-- with -1 only the global-max-size is in use for limiting -->
<max-size-bytes>-1</max-size-bytes>
<message-counter-history-day-limit>10</message-counter-history-day-limit>
<address-full-policy>PAGE</address-full-policy>
<auto-create-queues>true</auto-create-queues>
<auto-create-addresses>true</auto-create-addresses>
<auto-create-jms-queues>true</auto-create-jms-queues>
<auto-create-jms-topics>true</auto-create-jms-topics>
</address-setting>
<!--default for catch all-->
<address-setting match="#">
<dead-letter-address>DLQ</dead-letter-address>
<expiry-address>ExpiryQueue</expiry-address>
<redelivery-delay>0</redelivery-delay>
<!-- with -1 only the global-max-size is in use for limiting -->
<max-size-bytes>-1</max-size-bytes>
<message-counter-history-day-limit>10</message-counter-history-day-limit>
<address-full-policy>PAGE</address-full-policy>
<auto-create-queues>true</auto-create-queues>
<auto-create-addresses>true</auto-create-addresses>
<auto-create-jms-queues>true</auto-create-jms-queues>
<auto-create-jms-topics>true</auto-create-jms-topics>
</address-setting>
</address-settings>
<addresses>
<address name="DLQ">
<anycast>
<queue name="DLQ" />
</anycast>
</address>
<address name="ExpiryQueue">
<anycast>
<queue name="ExpiryQueue" />
</anycast>
</address>
<address name="toB">
<anycast>
<queue name="toB" />
</anycast>
</address>
<address name="toA">
<anycast>
<queue name="toA" />
</anycast>
</address>
</addresses>
<!-- Uncomment the following if you want to use the Standard LoggingActiveMQServerPlugin pluging to log in events
<broker-plugins>
<broker-plugin class-name="org.apache.activemq.artemis.core.server.plugin.impl.LoggingActiveMQServerPlugin">
<property key="LOG_ALL_EVENTS" value="true"/>
<property key="LOG_CONNECTION_EVENTS" value="true"/>
<property key="LOG_SESSION_EVENTS" value="true"/>
<property key="LOG_CONSUMER_EVENTS" value="true"/>
<property key="LOG_DELIVERING_EVENTS" value="true"/>
<property key="LOG_SENDING_EVENTS" value="true"/>
<property key="LOG_INTERNAL_EVENTS" value="true"/>
</broker-plugin>
</broker-plugins>
-->
</core>
</configuration>

View File

@ -0,0 +1,78 @@
/*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The ASF licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* <br>
* http://www.apache.org/licenses/LICENSE-2.0
* <br>
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.apache.activemq.artemis.tests.smoke.brokerConnection;
import javax.jms.Connection;
import javax.jms.ConnectionFactory;
import javax.jms.MessageConsumer;
import javax.jms.MessageProducer;
import javax.jms.Queue;
import javax.jms.Session;
import javax.jms.TextMessage;
import org.apache.activemq.artemis.tests.smoke.common.SmokeTestBase;
import org.apache.activemq.artemis.tests.util.CFUtil;
import org.apache.activemq.artemis.util.ServerUtil;
import org.junit.Assert;
import org.junit.Before;
import org.junit.Test;
public class BrokerConnectionMirrorSecurityTest extends SmokeTestBase {
public static final String SERVER_NAME_A = "brokerConnectMirrorSecurityA";
public static final String SERVER_NAME_B = "brokerConnectMirrorSecurityB";
@Before
public void before() throws Exception {
// no need to cleanup, these servers don't have persistence
// start serverB first, after all ServerA needs it alive to create connections
startServer(SERVER_NAME_B, 0, 0);
startServer(SERVER_NAME_A, 0, 0);
ServerUtil.waitForServerToStart(1, "B", "B", 30000);
ServerUtil.waitForServerToStart(0, "A", "A", 30000);
}
@Test
public void testMirrorOverBokerConnection() throws Throwable {
ConnectionFactory cfA = CFUtil.createConnectionFactory("amqp", "tcp://localhost:61616");
ConnectionFactory cfB = CFUtil.createConnectionFactory("amqp", "tcp://localhost:61617");
try (Connection connectionA = cfA.createConnection("A", "A");
Connection connectionB = cfB.createConnection("B", "B")) {
Session sessionA = connectionA.createSession(false, Session.AUTO_ACKNOWLEDGE);
Queue queue = sessionA.createQueue("someQueue");
MessageProducer producerA = sessionA.createProducer(queue);
for (int i = 0; i < 10; i++) {
producerA.send(sessionA.createTextMessage("message"));
}
Session sessionB = connectionB.createSession(false, Session.AUTO_ACKNOWLEDGE);
MessageConsumer consumerB = sessionB.createConsumer(queue);
connectionB.start();
for (int i = 0; i < 10; i++) {
TextMessage message = (TextMessage) consumerB.receive(1000);
Assert.assertNotNull(message);
Assert.assertEquals("message", message.getText());
}
}
}
}