The filter and the view use different convection for field names, ie the
connection view uses the `sessionID` field name while the connection filter
uses the `SESSION_ID` field name. This commit replace the field names used
by the filter with the field names used by the view preserving the backward
compatibility.
The provider of an SSL key/trust store is different from that store's
type. However, the broker currently doesn't differentiate these and uses
the provider for both. Changing this *may* potentially break existing
users who are setting the provider, but I don't see any way to avoid
that. This is a bug that needs to be fixed in order to support use-cases
like PKCS#11.
Change summary:
- Added documentation.
- Consolidated several 2-way SSL tests classes into a single
parameterized test class. All these classes were essentially the same
except for a few key test parameters. Consolidating them avoided
having to update the same code in multiple places.
- Expanded tests to include different providers & types.
- Regenerated all SSL artifacts to allow tests to pass with new
constraints.
- Improved logging for when SSL handler initialization fails.
When performing concurrent user admin actions (e.g. resetUser, addUser,
removeUser on ActiveMQServerControl) when using the
PropertiesLoginModule with reload=true the underlying user and role
properties files can get corrupted.
This commit fixes the issue via the following changes:
- Add synchronization to the management commands
- Add concurrency controls to underlying file access
- Change CLI user commands to use remote methods instead of modifying
the files directly. This avoids potential concurrent changes. This
change forced me to modify the names of some of the commands'
parameters to disambiguate them from connection-related parameters.
Both authentication and authorization will hit the underlying security
repository (e.g. files, LDAP, etc.). For example, creating a JMS
connection and a consumer will result in 2 hits with the *same*
authentication request. This can cause unwanted (and unnecessary)
resource utilization, especially in the case of networked configuration
like LDAP.
There is already a rudimentary cache for authorization, but it is
cleared *totally* every 10 seconds by default (controlled via the
security-invalidation-interval setting), and it must be populated
initially which still results in duplicate auth requests.
This commit optimizes authentication and authorization via the following
changes:
- Replace our home-grown cache with Google Guava's cache. This provides
simple caching with both time-based and size-based LRU eviction. See more
at https://github.com/google/guava/wiki/CachesExplained. I also thought
about using Caffeine, but we already have a dependency on Guava and the
cache implementions look to be negligibly different for this use-case.
- Add caching for authentication. Both successful and unsuccessful
authentication attempts will be cached to spare the underlying security
repository as much as possible. Authenticated Subjects will be cached
and re-used whenever possible.
- Authorization will used Subjects cached during authentication. If the
required Subject is not in the cache it will be fetched from the
underlying security repo.
- Caching can be disabled by setting the security-invalidation-interval
to 0.
- Cache sizes are configurable.
- Management operations exist to inspect cache sizes at runtime.
In certain cases with shared-store HA a broker's activation can fail but
the broker will still be holding the journal lock. This results in a
"zombie" broker which can't actually service clients and prevents the
backup from activating.
This commit adds an ActivationFailureListener to catch activation
failures and stop the broker completely.
The calculation used by
ActiveMQServerControlImpl.getDiskStoreUsagePercentage() is incorrect. It
uses disk space info with global-max-size which is for address memory.
Also, the existing getDiskStoreUsage() method *already* returns a
percentage of total disk store usage so this method seems redundant.
Add the command `check` to the Command Line utility. This command exposes some
checks for nodes and queues using the management API for most of them.
The checks have been implemented to be modular. Each user can compose his own
health check, ie to produce and consume from a queue the command is
`artemis check queue --name TEST --produce 1 --consume 1`.
it is intentional to compare brokerURL == DEFAULT_BROKER_URL here
so, I added a @SuppressWarnings to clear the false positivie.
And also added some comment on why this is intentional.
This commit does the following:
- Deprecates existing overloaded createQueue, createSharedQueue,
createTemporaryQueue, & updateQueue methods for ClientSession,
ServerSession, ActiveMQServer, & ActiveMQServerControl where
applicable.
- Deprecates QueueAttributes, QueueConfig, & CoreQueueConfiguration.
- Deprecates existing overloaded constructors for QueueImpl.
- Implements QueueConfiguration with JavaDoc to be the single,
centralized configuration object for both client-side and broker-side
queue creation including methods to convert to & from JSON for use in
the management API.
- Implements new createQueue, createSharedQueue & updateQueue methods
with JavaDoc for ClientSession, ServerSession, ActiveMQServer, &
ActiveMQServerControl as well as a new constructor for QueueImpl all
using the new QueueConfiguration object.
- Changes all internal broker code to use the new methods.
FQQN support for the CLI was implemented via ARTEMIS-1840 before general
FQQN support was added for producers via ARTEMIS-1867. The CLI's FQQN
functionality is slightly different from what is now generally available
and it can be confusing for users. By refactoring the CLI to use the
general FQQN support the code can be much simpler and consistent with
the expected behavior. Refactoring includes:
- Deprecating the use of "fqqn://". The CLI commands use JMS so using
"fqqn://" (instead of "queue://" or "topic://") makes the destination
type ambiguous which can yield unexpected message routing behavior.
Now "queue://" and "topic://" can be used with the normal FQQN syntax
(e.g. address::queue).
- Eliminating the use of the _AMQ_ROUTE_TO header when sending messags
to an FQQN. The _AMQ_ROUTE_TO header is an internal header used when
routing messages over a cluster bridge. Using it in the CLI for FQQN
support was a clever hack, but using the general FQQN support
eliminates complexity and makes behavior consistent between
standalone JMS clients using FQQN and the CLI.
- De-duplicating MessageSerializer initialization boilerplate.
- Removing limitation where using an FQQN with an anycast address
required the same name for the address and queue.
This is a Large commit where I am refactoring largeMessage Body out of CoreMessage
which is now reused with AMQP.
I had also to fix Reference Counting to fix how Large Messages are Acked
And I also had to make sure Large Messages are transversing correctly when in cluster.
There is an optimization in AMQP, that properties are only parsed over demand.
It happens that after ARTEMIS-2294 (commit 2dd0671698),
every send would request for the property on the message, resulting the properties to always be parsed upon send.
Even when there's no use of application properties.
Add the config parameter `page-sync-timeout` to set a customized value,
because if the broker is configured to use ASYNCIO journal, the timeout
has the same value of NIO default journal buffer timeout ie 3333333.
* Upgrading versions
* Adding wildfly-common dependency as jboss-logmanager now depends on it
for simple common operations such as getting hostname or process id
* Updating bootclasspath with wildfly-common
The Audit log allows user to log some important actions,
such as ones performed via management APIs or clients,
like queue management, sending messages, etc.
The log tries to record who (the user if any) doing what
(like deleting a queue) with arguments (if any) and timestamps.
By default the audit log is disabled. Through configuration can
be easily turned on.
This is the second commit. It improves the windows service
configuration file so that the service can be shutdown
gracefully (clean shutdown) and allow for a chance to
clean up the web tmp dir.
These improvements were also part of this task:
- Routing is now cached as much as possible.
- A new Runnable is avoided for each individual message,
since we use the Netty executor to perform delivery
https://issues.apache.org/jira/browse/ARTEMIS-2205
Optionally specify a queue routing type when creating a broker. Example:
"create --queues myqueue,mytopic:multicast". Defaults to anycast if
unspecified.
Added new cases:
- export from anycast queue, then import to multicast topic where number of queues > 1
- export from anycast queue, then import to multicast fqqn where number of queues > 1
- export from multicast topic, then import to anycast queue (both address)
- export from anycast queue, then import to multicast topic (both address)
Previously the port was always random. This caused problems with
remote JMX connections that needed to overcome firewalls. As of
this patch it's possible to make the RMI port static and whitelist
it in the firewall settings.
JMX configuration is now done via management.xml. Configuring JMX via
the start scripts could result in unexpected behavior since the
authorisation configuration from management.xml would be ignored.
Fix warning seen in logs during test case runs, caused by CF not being closed.
Oct 10, 2018 8:53:18 PM org.apache.activemq.artemis.core.client.impl.ClientSessionFactoryImpl finalize
WARN: AMQ212008: I am closing a core ClientSessionFactory you left open. Please make sure you close all ClientSessionFactories explicitly before letting them go out of scope! 639,542,871
java.lang.Exception
at org.apache.activemq.artemis.core.client.impl.ClientSessionFactoryImpl.<init>(ClientSessionFactoryImpl.java:171)
at org.apache.activemq.artemis.core.client.impl.ServerLocatorImpl.createSessionFactory(ServerLocatorImpl.java:779)
at org.apache.activemq.artemis.cli.commands.messages.DestAbstract.getManagementSession(DestAbstract.java:103)
at org.apache.activemq.artemis.cli.commands.messages.DestAbstract.getQueueAttribute(DestAbstract.java:127)
at org.apache.activemq.artemis.cli.commands.messages.DestAbstract.getQueueIdFromName(DestAbstract.java:116)
at org.apache.activemq.artemis.cli.commands.messages.Producer.execute(Producer.java:75)
at org.apache.activemq.artemis.cli.Artemis.internalExecute(Artemis.java:150)
at org.apache.activemq.artemis.cli.Artemis.execute(Artemis.java:98)
at org.apache.activemq.artemis.cli.Artemis.execute(Artemis.java:125)
at org.apache.activemq.artemis.cli.Artemis.main(Artemis.java:81)
Replace guava Preconditions with artemis Preconditions
Replace guava Predicate with java Predicate
Replace guava Ordering with java Comparator
Replace guava Immutable, with ArrayList/Set and then wrap with unmodifiable
cannot find login.config
The Windows variable ARTEMIS_ETC_INSTANCE was not set correctly,
as it was used as ARTEMIS_INSTANCE_ETC. So the fix is to make sure
that the two match, and additionally they it was renamed to more
closely match the other variables naming convention. This was done
in two files; so when 'artemis create mybroker' is run on a Windows
machine, the broker is correctly configured with login.config.
Minor fix of changing use of single quotes to correct usage of
double quotes when declaring variable
This option was removed in JRE 10 and its presence causes error on startup.
Artemis still does not compile on JDK 9 and up, so what I tried was
to compile on JDK 1.8 and then start Artemis on 1.8 and 10.
That now works for me.
Clebert Suconic
Domenico Francesco Bruscino
Justin Bertram
gtully
Andy Taylor
franz1981
brusdev
Emmanuel Hugonnet
Wei Yang
Shailendra Kumar Singh
Emmanuel Hugonnet
Jiri Danek
Howard Gao
King Ramos
feuillemorte
Šmucr Jan
feuillemorte
Michael André Pearce
Zachary Simon
vkamble60
Robbie Gemmell
acemanace
Martyn Taylor