Both authentication and authorization will hit the underlying security
repository (e.g. files, LDAP, etc.). For example, creating a JMS
connection and a consumer will result in 2 hits with the *same*
authentication request. This can cause unwanted (and unnecessary)
resource utilization, especially in the case of networked configuration
like LDAP.
There is already a rudimentary cache for authorization, but it is
cleared *totally* every 10 seconds by default (controlled via the
security-invalidation-interval setting), and it must be populated
initially which still results in duplicate auth requests.
This commit optimizes authentication and authorization via the following
changes:
- Replace our home-grown cache with Google Guava's cache. This provides
simple caching with both time-based and size-based LRU eviction. See more
at https://github.com/google/guava/wiki/CachesExplained. I also thought
about using Caffeine, but we already have a dependency on Guava and the
cache implementions look to be negligibly different for this use-case.
- Add caching for authentication. Both successful and unsuccessful
authentication attempts will be cached to spare the underlying security
repository as much as possible. Authenticated Subjects will be cached
and re-used whenever possible.
- Authorization will used Subjects cached during authentication. If the
required Subject is not in the cache it will be fetched from the
underlying security repo.
- Caching can be disabled by setting the security-invalidation-interval
to 0.
- Cache sizes are configurable.
- Management operations exist to inspect cache sizes at runtime.
This is allowing journal appends to happen in burst
during replication, by batching replication response
into the network at the end of the append burst.
I couldn't reproduce this with a test, but static code analysis led me
to this solution which is similar to the fix done for ARTEMIS-2592 via
e397a17796.
Due to a lack of concurrency protections it's possible to create a
consumer on a closed session. I've not been able to reproduce this with
a test, but I've seen it in the wild. Static code analysis points to a
need for better concurrency controls around closing the session and
creating consumers.
This is almost a NO-JIRA, but since I'm fixing ManagementServiceImplTest.testGetResources broken after this
I'm commiting this change associated with ARTEMIS-2828
Since getDiskStoreUsage on the ActiveMQServerControl is converting a
double to a long the value is always 0 in the management API. It should
return a double instead.
Adding this metric required moving the meter registration code from the
AddressInfo class to the ManagementService in order to get clean access
to both the AddressInfo and AddressControl classes.
The calculation used by
ActiveMQServerControlImpl.getDiskStoreUsagePercentage() is incorrect. It
uses disk space info with global-max-size which is for address memory.
Also, the existing getDiskStoreUsage() method *already* returns a
percentage of total disk store usage so this method seems redundant.
Now it is possible to reset queue parameters to their defaults by removing them
from broker.xml and redeploying the configuration.
Originally this PR covered the "filter" parameter only.
ORIG message propertes like _AMQ_ORIG_ADDRESS are added to messages
during various broker operations (e.g. diverting a message, expiring a
message, etc.). However, if multiple operations try to set these
properties on the same message (e.g. administratively moving a message
which eventually gets sent to a dead-letter address) then important
details can be lost. This is particularly problematic when using
auto-created dead-letter or expiry resources which use filters based on
_AMQ_ORIG_ADDRESS and can lead to message loss.
This commit simply over-writes the existing ORIG properties rather than
preserving them so that the most recent information is available.
- when sending messages to DLQ or Expiry we now use x-opt legal names
- we now support filtering thorugh annotations if using m. as a prefix.
- enabling hyphenated_props: to allow m. as a prefix
DivertBindings are now properly cleaned up when a queue binding is
removed that matches the divert. The correct key is now used to remove
the queue address from the set and the correct address is now used to
remove the remote consumer.
This one should improve eventual failures on ClusterConnectionControlTest
to validate this, run ClusterConnectionControlTest::testNotifications in a loop
you will see eventually the test taking longer to shutdown the executor as the call could be blocked.
This won't be an issue on a real server (Production system)
however, on the testsuite or while embedded this could cause issues,
if a same instance is stopped then started.
This is the reason why BackupAuthenticationTest was intermittently failing.
I also adapted the test since I would need to stop the server and reactivate it in order to change the configuration.
The previous test wasn't acting like a real server.
Currently when the broker hits the common 'Address already in use' issue
when starting the process terminates with a vague exception. The user is
left to guess which acceptor actually failed. If the broker has lots of
acceptors it is a tedious process to identify the problematic
configuration. This commit adds details to the exception message about
which acceptor failed and which host:port it was attempting to bind to.
This commit does the following:
- Deprecates existing overloaded createQueue, createSharedQueue,
createTemporaryQueue, & updateQueue methods for ClientSession,
ServerSession, ActiveMQServer, & ActiveMQServerControl where
applicable.
- Deprecates QueueAttributes, QueueConfig, & CoreQueueConfiguration.
- Deprecates existing overloaded constructors for QueueImpl.
- Implements QueueConfiguration with JavaDoc to be the single,
centralized configuration object for both client-side and broker-side
queue creation including methods to convert to & from JSON for use in
the management API.
- Implements new createQueue, createSharedQueue & updateQueue methods
with JavaDoc for ClientSession, ServerSession, ActiveMQServer, &
ActiveMQServerControl as well as a new constructor for QueueImpl all
using the new QueueConfiguration object.
- Changes all internal broker code to use the new methods.
Due to the changes in 6b5fff40cb the
config parameter message-expiry-thread-priority is no longer needed. The
code now uses a ScheduledExecutorService and a thread pool rather than
dedicating a thread 100% to the expiry scanner. The pool's size can be
controlled via scheduled-thread-pool-max-size.
This appears to have been added to the code-base by mistake over 10
years ago. It seems related to debugging and I can't see anywhere where
it is actually used so I'm removing it.
Using a property on AMQPLargeMessage instead of a ThreadLocal
This was causing issues on the journal as the message may transverse different threads on the journal.
There is no guarantee that the encodeSize size is the same in AMQP right after read.
As the protocol may add additional bytes right after decoded such as header, extra properties.. etc.
This is a Large commit where I am refactoring largeMessage Body out of CoreMessage
which is now reused with AMQP.
I had also to fix Reference Counting to fix how Large Messages are Acked
And I also had to make sure Large Messages are transversing correctly when in cluster.
- Avoid some Properties Decoding, checking if we need certain properties like scheduled delivery
- Avoid creating some unnecessary SimpleString instances
- Removed some intermediate ActiveMQBuffer allocation
- Removed some intermediate UnreleasableByteBuf allocation
Adding serialVersionUID to WildcardConfiguration since it is
serializable. Without serialVersionUID being specified a new one is
generated on each compilation which prevents object deserialization
between releases.
This is to make it possible to identify what test is leaking files whenever that is happening.
That is because future tests will report the leaks, and it's difficult to identify where it happened.
Also i'm changing NoProcessFilesBehind to show the getOpenFD propertly
Large messages can be split up using Websocket Continuation Frames.
This allows for much smaller buffer sizes to send or receive
potentially very large messages.
There is an optimization in AMQP, that properties are only parsed over demand.
It happens that after ARTEMIS-2294 (commit 2dd0671698),
every send would request for the property on the message, resulting the properties to always be parsed upon send.
Even when there's no use of application properties.
This is a surprisingly large change just to fix some log messages, but
the changes were necessary in order to get the relevant data to where it
was being logged. The fact that the data wasn't readily available is
probably why it wasn't logged in the first place.
Removed unused private constant FLUSH_TIMEOUT.
Solved some compiler warnings (missing generic type, private class can
be final). Fixed a performance related sevntu checkstyle warning
"Variable 'xyz' can be moved inside the block at line '2,864' to
restrict runtime creation.".
Add a paged message to the tail, when the QueueIterateAction doesn't handle it, to avoid removing unhandled paged message. Move the refRemoved calls from the QueueIterateActions to the iterQueue to fix the queue stats.
If a broker loses its file lock on the journal and doesn't notice (e.g.
network connection failure to an NFS mount) then it can continue to run
after its backup activates resulting in split-brain.
This commit implements periodic journal lock evaluation so that if a live
server loses its lock it will automatically restart itself.
The PageSubscriptionImpl.cleanupEntries could be locked by the queue
depage because they are executed with the same executor and the depage
could be locked by the iterQueue.
If PageSubscriptionImpl.cleanupEntries is locked, no one clean up the
JournalRecord and PagePositionImpl instances created during iterQueue.
So removing all messages from a huge queue, causes the retention of too
JournalRecord and PagePositionImpl instances until an OOM.
To avoid to lock the PageSubscriptionImpl.cleanupEntries the depage is
executed only if the queue isn't iterating.
This commit introduces the ability to configure a downstream connection
for federation. This works by sending information to the remote broker
and that broker will parse the message and create a new upstream back
to the original broker.
Clebert Suconic
Justin Bertram
Domenico Francesco Bruscino
Michael Pearce
franz1981
brusdev
Howard Gao
Jan Šmucr
qihongxu
Bas Elzinga
Keith Wall
Havret
Robbie Gemmell
Emmanuel Hugonnet
Christopher L. Shannon (cshannon)
Andy Taylor
Atri Sharma
Benjamin Graf
sebthom
Wei Yang
Dewald Pretorius