When initially developed the expectation was that no more producers would keep connecting but in a scenario like this
the consumers could actually give up and things will just accumulate on the server.
We should cleanup these upon disconnect.
This commit does the following:
- Replaces non-inclusive terms (e.g. master, slave, etc.) in the
source, docs, & configuration.
- Supports previous configuration elements, but logs when old elements
are used.
- Provides migration documentation.
- Updates XSD with new config elements and simplifies by combining some
overlapping complexTypes.
- Removes ambiguous "live" language that's used with regard to high
availability.
- Standardizes use of "primary," "backup," "active," & "passive" as
nomenclature to describe both configuration & runtime state for high
availability.
As I worked through implementing a more generic JSON marshaller, I tried using reflection through BeanUtils and other ways
however the endresult was always worse as there were a few caveats that were not as easy to accomplish.
For that reason I went to a declarative appraoch where I define a meta-data object on AddressSettings and AddressSettingsInfo and
reuse the metadata in a few other places.
Durable subscrption state is part of the MQTT specification which has
not been supported until now. This functionality is implemented via an
internal last-value queue. When an MQTT client creates, updates, or
adds a subscription a message using the client-ID as the last-value is
sent to the internal queue. When the broker restarts this data is read
from the queue and populates the in-memory MQTT data-structures.
Therefore subscribers can reconnect and resume their session's
subscriptions without have to manually resubscribe.
MQTT state is now managed centrally per-broker rather than in the
MQTTProtocolManager since there is one instance of MQTTProtocolManager
for each acceptor allowing MQTT connections. Managing state per acceptor
would allow odd behavior with clients connecting to different acceptors
with the same client ID.
The subscriptions are serialized as raw bytes with a "version" byte for
potential future use, but I intentionally avoided adding complex
scaffolding to support multiple versions. We can add that complexity
later if necessary.
Some tests needed to be changed since instantiating an MQTT protocol
manager now creates an internal queue. A handful of tests assume that no
queues will exist other than the ones they create themselves. I updated
the main test super-class so that an MQTT protocol manager is not
automatically instantiated when configuring a broker for in-vm support.
This commit contains the following changes:
- eliminate used, undeclared dependencies
- eliminate unused, declared dependencies
- fix scope for test dependencies
- eliminate org.hamcrest completely as its use involved deprecated code
as well as dependencies from multiple versions
Currently JavaDoc is generated for many classes that don't need it.
JavaDoc should be reserved for user-facing classes (e.g. those used by
client application developers and developers embedding a broker into
their application). This commit narrows down the configuration to just
the classes that are needed. This will save time during release builds,
and save disk space wherever these files are stored (e.g. Apache
website).
The broker process fails to exit if an error is encountered starting the NodeManager. The issue is resolved by converting the critical analyzer thread to a daemon thread. As added protection, the thread is manually stopped when this error is encountered.
When skipping the authentication cache details for the original
exception are not logged.
This commit ensures these details are logged and adopts the
ExceptionUtils class from Apache Commons Lang in lieu of the previous
custom implementation.
When sending, for example, to a predefined anycast address and queue
from a multicast (JMS topic) producer, the routed count on the address
is incremented, but the message count on the matching queue is not. No
indication is given at the client end that the messages failed to get
routed - the messages are just silently dropped.
Fixing this problem requires a slight semantic change. The broker is now
more strict in what it allows specifically with regards to
auto-creation. If, for example, a JMS application attempts to send a
message to a topic and the corresponding multicast address doesn't exist
already or the broker cannot automatically create it or update it then
sending the message will fail.
Also, part of this commit moves a chunk of auto-create logic into
ServerSession and adds an enum for auto-create results. Aside from
helping fix this specific issue this can serve as a foundation for
de-duplicating the auto-create logic spread across many of the protocol
implementations.
- interrupted message breaking reference counting
After the server writing to the client is interrupted in AMQP, the reference counting was broken what would require the server restarted
in order to cleanup the files of any interrupted sends.
- Removed consumer during large message delivery damaging large messages
If the consumer failed to deliver messages for any reason, the message on the queue would be duplicated. what would wipe out the body of the message
and other journal errors would happen because of this.
extra debug capabilities added into RefCountMessage as part of ARTEMIS-4206 in order to identify these issues
This commit fixes the following things:
- Moves connection audit logging to the resource audit logger instead
of using a dedicated logger as that would adversely impact upgrading
users, and arguably didn't make sense in the first place.
- Mitigates an potential NPE w.r.t. connection ID.
- Updates the "dummy" management connection to return a valid
connection ID.
there are two leaks here:
* QueueImpl::delivery might create a new iterator if a delivery happens right after a consumer was removed, and that iterator might belog to a consumer that was already closed
as a result of that, the iterator may leak messages and hold references until a reboot is done. I have seen scenarios where messages would not be dleivered because of this.
* ProtonTransaction holding references: the last transaction might hold messages in the memory longer than expected. In tests I have performed the messages were accumulating in memory. and I cleared it here.
The issue identified with AMQP was under Transaction usage, and while opening and closing sessions.
It seems the leak would be released once the connection is closed.
We added a new testsuite under ./tests/leak-tests To fix and validate these issues
when cancelling a large number of messages, the addSorted could be holding a lock for too long causing the server to crash under CriticalAnalyzer
co-authored: AntonRoskvist <anton.roskvist@volvo.com> (discovering the issue and providing the test ClientCrashMassiveRollbackTest.java)
- optimize startup time on paging (check-depage on startup)
- otpimize getNextPage() on complete pages
- optimize getFirstMessage() and paging. (avoid iterator usage)
Attempt to standardize all Logger declaration to a singular variable name
which makes the code more consistent and make finding usages of loggers in
the code a bit easier.
Logger statements should use formatting syntax and let the normal framework checks take care of
checking if a logger is enabled instead of string concats and isXEnabled logger checks except
in cases there is known expense to the specifc logging message/arg preparation or passing.
Changes from myself and Robbie Gemmell.
Co-authored-by: Robbie Gemmell <robbie@apache.org>
By allowing to pass caller's classname directly to org.apache.activemq.artemis.utils.ActiveMQThreadFactory#defaultThreadFactory instead of calculating it from stack.
Running HorizontalPagingTest with these variables would make the test to fail unless these changes are applied.
export TEST_HORIZONTAL_SERVER_START_TIMEOUT=300000
export TEST_HORIZONTAL_TIMEOUT_MINUTES=120
export TEST_HORIZONTAL_PROTOCOL_LIST=OPENWIRE
export TEST_HORIZONTAL_OPENWIRE_DESTINATIONS=200
export TEST_HORIZONTAL_OPENWIRE_MESSAGES=1000
export TEST_HORIZONTAL_OPENWIRE_COMMIT_INTERVAL=100
export TEST_HORIZONTAL_OPENWIRE_RECEIVE_COMMIT_INTERVAL=0
export TEST_HORIZONTAL_OPENWIRE_MESSAGE_SIZE=20000
export TEST_HORIZONTAL_OPENWIRE_PARALLEL_SENDS=10
The OpenWire JMS client shipped with ActiveMQ "Classic" uses the
client's hostname as part of the `JMSMessageID`. Consumers may use this
data to select messages sent from particular hosts. Although this is
brittle and not recommended it is nonetheless possible.
However, when messages arrive to ActiveMQ Artemis they are converted
to core messages, and the broker doesn't properly map the selector from
`JMSMessageID` to the corresponding property on the underlying core
message. This commit fixes that problem. Changes include:
- Mapping selector from JMSMessageID to the internal __HDR_MESSAGE_ID
- Relocating some constant values so that both the protocol and commons
module can use them
- Adding a test
Update the salt calculation to more closely align with the
"Randomness Recommendations for Security" at
https://www.ietf.org/rfc/rfc1750.txt.
This was inadvertently changed in
5965a45894.
Both audit logging and logging from the LoggingActiveMQServerPlugin are
unclear as they relate to transactional sends and acks. Both essentially
ignore the transaction which makes it appear that an operation has taken
place when, in fact, it hasn't (e.g. a transactional ack is rolled back
but the log indicates the ack went through).
This commit fix this with the following changes:
- Log details when a send or ack is added to a transaction.
- Log details when the transaction is committed.
- Log when the transaction is rolled back.
- Include transaction details in the relevant DEBUG logs.
- Simplify INFO level logging for sends & acks in
LoggingActiveMQServerPlugin. Ensure details are in the DEBUG logs.
Other changes:
- Make capitalization more consistent in a handful of audit logs.
Clebert Suconic
Justin Bertram
Domenico Francesco Bruscino
Emmanuel Hugonnet
Robbie Gemmell
Chao Wang
Gary Tully
Dries Harnie
Stephen Higgs
Alexey Markevich
Erwin Dondorp
Timothy Bish
Rico Neubauer