The occasional assertion error is prevented by using Wait.assertEquals
where Assert.assertEquals was used previously.
I did not observe the timing issue on all asserts (only on the first
two), but there is no harm in replacing them all.
java.lang.AssertionError:
Expected :2
Actual :1
The below error is prevented by using Wait.assertEquals
where Assert.assertEquals was used previously.
java.lang.AssertionError:
Expected :2
Actual :1
[...]
at org.junit.Assert.assertEquals(Assert.java:542)
at org.apache.activemq.artemis.tests.integration.management.QueueControlTest.testListMessagesWithNullFilter(QueueControlTest.java:804)
The below error is prevented by using Wait.assertEquals
where Assert.assertEquals was used previously.
java.lang.AssertionError:
Expected :2
Actual :1
[...]
at org.apache.activemq.artemis.tests.integration.management.QueueControlTest.testListMessagesWithEmptyFilter(QueueControlTest.java:827)
This commit adds support for tracking metrics for bridges for both
normal bridges and bridges that are part of a cluster. The two
statistics added in this commit are messages pending acknowledgement
and messages acknowledged but more can be added later.
The below error is prevented by adding Wait.assertEquals,
where Assert.assertEquals was used previously. Timeout is
set to small increments, since we rarely need to wait more
than 100 ms for the condition to become true.
java.lang.AssertionError: expected:<1> but was:<0>
at org.junit.Assert.fail(Assert.java:88)
at org.junit.Assert.failNotEquals(Assert.java:743)
at org.junit.Assert.assertEquals(Assert.java:118)
at org.junit.Assert.assertEquals(Assert.java:555)
at org.junit.Assert.assertEquals(Assert.java:542)
at org.apache.activemq.artemis.tests.integration.client.HeuristicXATest.doRecoverHeuristicCompletedTxWithRestart(HeuristicXATest.java:306)
at org.apache.activemq.artemis.tests.integration.client.HeuristicXATest.testRecoverHeuristicCommitWithRestart(HeuristicXATest.java:251)
This test was initializing a libaio of 21K, that would fail on limited servers.
This is decreasing maxIO so it would requires less resources to run it.
Anonymous senders (those created without a target address) are not
blocked when max-disk-usage is reached. The cause is that when such
a sender is created on the broker, the broker doesn't check the
disk/memory usage and gives out the credit immediately.
In a live-backup scenario, if the live is restarted and shutdown too soon,
the client have a chance to fail on failover because it's internal topology
is inconsistent with the final status. The client keeps connecting to live
already shut down, never trying to connect to the backup.
It's a porting from HORNETQ-1572.
Tests should always extend ActiveMQTestBase whenever is possible.
This is because there are a few rules to avoid thread leakages.
The test was also leaking an executor and I believe it was
not always stopping the servers, which I fixed here.
When "large" messages are converted to / from core in order to be stored
in the large message store the type of the AMQP body section is being
lost and reconstituted incorrectly in some cases. The message needs to
be annotated with the original AMQP type for the body and that used to
manage the conversion back to AMQP from Core.
This reverts commit c3fbd1b9e4.
Based on the discussion on the PR
https://github.com/apache/activemq-artemis/pull/2035 this shouldn't have
been merged. It's importing JMS-specific code into the core broker which
is something we've worked hard to eliminate in recent releases.
Avoids pooling corner cases interacting with ARTEMIS 1843 + ARTEMIS 1861 improvements.
Also tagging ARTEMIS-1941 to note test needs altered along with it.
updates max frame size tests to verify behaviour seen with standalone
brokers rather than non represenative test-only conditions, as well
as more closely validate the recieved messages
Calling close multiple times on ServerConsumer can result in multiple
notifications being routed around the cluster. This causes cluster
topology info to become skewed. Which affects a number of components
such as message redistribution, metrics and can eventually cause OOM
should multiple queues be redistributing at the same time.
Quorum voting is used by both the live and the backup to decide what to do if a replication connection is disconnected.
Basically, the server will request each live server in the cluster to vote as to whether it thinks the server it is replicating to or from is still alive.
You can also configure the time for which the quorum manager will wait for the quorum vote response.
Currently, the value is hardcoded as 30 sec. We should change this 30-second wait to be configurable.
Added an example to demonstrate how to configure and use openssl
Moved/Added netty-tcnative dependency to artemis-distribution
Changed artemis-jms-client-all pom to exclude io.netty from relocation
so that the native openssl can be loaded
1. Add tests case to verify issue and fix, tests also tests for same behavior using CORE, OPENWIRE and AMQP JMS Clients.
2. Update Core Client to check for queue before creating, sharedQueue as per createQueue logic.
3. Update ServerSessionPacketHandler to handle packets from old clients to perform to implement the same fix server side for older clients.
4. Correct AMQP protocol so correct error code is returned on security exception so that amqp jms can correctly throw JMSsecurityException
5. Correct AMQP protocol to check for queue exists before create
6. Correct OpenWire protocol to check for address exists before create
If a client ack mode consumer receives a message and closes without
acking it, the redelivery of the message won't set the redelivery
flag (JMSRedelivered) because it doesn't increment the delivery count
when message is cancelled back to queue.
Replace guava Preconditions with artemis Preconditions
Replace guava Predicate with java Predicate
Replace guava Ordering with java Comparator
Replace guava Immutable, with ArrayList/Set and then wrap with unmodifiable
Configure a value of 128KB for AMQP max frame size by default to improve
overall performance and provide a limit on delivery size before chunking
begins.
Use new no copy variants for the delivery send and receive and make
use of the ReadableBuffer type that is now used to convery tranfer
payloads without a copy. Also set max outgoing frame size to match
the configured maxFrameSize for the AMQP protocol head to avoid the
case where an overly large frame can be written instead of chunking
a large message.
QuorumFailOverTest.testQuorumVotingLiveNotDead fails
because the quorum vote takes longer time to finish than
the test expects to.
(The test used to pass until commit ARTEMIS-1763)
The previous commit about this feature wasn't using the row count query
ResultSet.
The mechanics has been changed to allow the row count query
to fail, because DROP and CREATE aren't transactional and immediate
in most DBMS.
It includes a test that stress its mechanics if used with DBMS like
DB2 10.5 and Oracle 12c.
Additional checks and logs have been added to trace each steps.
Expose method to return current mappings of groups to consumers
Expose methods to reset (remove) specific group mapping from groupID to Consumer
Expose methods to reset (remove) all group mappings
messageAcknowledged plugin callback methods
Knowing the consumer that expired or acked a message (if available) is
useful and right now a message reference only contains a consumer id
which by itself is not unique so the actual consumer needs to be passed
When finding out if a connector belong to a target node it compares
the whole parameter map which is not necessary. Also in understanding
the connector the best place is to delegate it to the corresponding
remoting connection who understands it. (e.g. INVMConnection knows
whether the connector belongs to a target node by checking it's
serverID only. The netty ones only need to match host and port, and
understanding that localhost and 127.0.0.1 are same thing).
The queue metrics were being decremented improperly because on iteration
over the cancelled scheduled messages because the flag for fromMessageReferences was not
set to false. Setting the flag to false skips over the metrics update
which is what we want as the scheduled messages were never added to the
message references in the first place so the metrics don't need updating
When creating a temp destination and auto-create-address set to false, the
broker throws an error and refuse to create it. This doesn't conform to
normal use-case (like amqp dynamic flag) where the temp destination should
be allowed even if the auto-create-address is false.
Travis CI has been reporting test failures.
Looking on logs I could see a critical failure happening but not much information on why.
This will help identify further issues.
Make sure the correct buffer is used when decoding the stored Core
message that originated from the conversion of an AMQP message sent and
annotated as a JMS ObjectMessage which trips the large message boundary.
The cluster connection bridge has a TopologyListener and connects to a new node
each time it receives a nodeUp() event. It needs to put a check here to make
sure that the cluster bridge only connects to its target node and it's backups.
This issue shows up when you run LiveToLiveFailoverTest.testConsumerTransacted
test.
Also in this commit improvement of BackupSyncJournalTest so that it runs more
stable.
When creting a durable topic subscription using the Artemis 1.x JMS
client library. The client sends a QueueQuery to the server to see if
the durable subsciption queue already exists. The broker then performs
some transformation of the queue addresses to suit the 1.x naming
scheme. However, if the queue does not already exist the transform is
attempted on a null string causing NPE. To fix we simply check that the
result return isExists=true.
Add Test Case to stop and restart server after config reload and check state, this re-creates network health check issue where config changes are lost when network health check de-activates the server and then re-activates.
Add fix to update the held configuration thats used when initialisation steps during start are done.
connection
To prevent a socket from hanging open by a bad client the broker should
make sure to stop the transport if a connection attempt fails by an
OpenWire client
The method testStopConnectionDuringOnMessage in this class was relying
on sleep() calls for critical timing. This test fails sometimes on
fast-tests so I modified it to use a latch and a few waitFor calls to be
more deterministic. It also runs in a third of the time now.
Logging for the "fast-tests" profile used for PR builds could be reduced
significantly. This would save time as well as prevent log truncation
(Travis CI only supports logs up to 4MB).
Revert #1875
This reverts commit 5ad45369ce.
The storage manager is broken now as the AddressManager change here is trying to insert a record on the journal before startup.
- LargeServerMessageImpl.finalize is eventually causing deadlocks
- CoreMessage needs to check properties before decoding
- PagingTest tweaks
- ServerLocatorImpl can deadlock eventually, avoiding a lock and using actors
- ActiveMQServerImpl.finalize is also evil and can cause deadlocks on the testsuite
- MqttClusterRemoteSubscribeTest needs to setup the Address now on the setup
The PageCountPendingImpl was increasing the encode size without using its full allocation.
This was causing issues on replication as the encode is also used to determine the size of the packets.
however the packets were not receive the full allocated data causing missing packets on the replication
and test failures.
This is fixing the issue
Adding new metrics for tracking message counts and sizes on a Queue.
This includes tracking metrics for pending, delivering and scheduled
messages. The paging store also tracks message size now.
Support exlusive consumer
Allow default address level settings for exclusive consumer
Allow queue level setting in broker.xml
Add the ability to set queue settings via Core JMS using address. Similar to ActiveMQ 5.X
Allow for Core JMS client to define exclusive consumer using address parameters
Add tests
Make sure that if a bridge disconnects and there is no record in the topology that it uses the original bridge connector to reconnect.
Originally the live broker that disconnected was left in the Topology, thie broke quorum voting as when th evote happened all brokers when asked though th etarget broker was still alive.
The fix for this was to remove the target live broker from the Topology. Since the bridge reconnect logic relied on this in a non HA environment to reconnect this stopped working.
The fix now uses the original target connector (or backup) to reconnect in the case where the broker was actually removed from the cluster.
https://issues.apache.org/jira/browse/ARTEMIS-1654
When using the tool to import more than one large messages
from xml exported file, this utility class will create some
tmp files, each for one large message. However it only delete
one of the tmp files. All the rest of tmp files won't get
cleaned up.
HornetQClientProtocolManager is used to connect HornteQ servers.
During reconnect, it sends a CheckFailoverMessage packet to the
server as part of reconnection. This packet is not supported by
HornetQ server (existing release), so it will break the backward
compatibility.
Also fixed a failover issue where a hornetq NettyConnector's
ConnectorFactory is serialized to the clients who cannot
instantiate it because class not found exception.
ActiveMQTestBase has been enhanced to expose the Database storage configuration and by adding specific JDBC HA configuration properties.
JdbcLeaseLockTest and NettyFailoverTests have been changed in order to make use of the JDBC configuration provided by ActiveMQTestBase.
JdbcNodeManager has been made restartable to allow failover tests to reuse it after a failover.
Test consistency between live and backup, espacially on
a slow live.
The test use MessagePersister::encode to simulate slow IO condition.
After live started, we send 5 message with a delay(default 500ms),
then start backup, wait until replicated, then send more message
without delay. If all message sent successfully, the backup should
has the same messages as live. We assert the message number only.
Flag needs to be set when auto creating an address so that the address
can be removed later if auto delete is configured when creating a
subscription with MQTT
We provide a feature to mask passwords in the configuration files.
However, passwords in the bootstrap.xml (when the console is
secured with HTTPS) cannot be masked. This enhancement has
been opened to allow passwords in the bootstrap.xml to be masked
using the built-in masking feature provided by the broker.
Also the LDAPLoginModule configuration (in login.config) has a
connection password attribute that also needs this mask support.
In addition the ENC() syntax is supported for password masking
to replace the old 'mask-password' flag.
Change all use from Set<RoutingType> to EnumSet<RoutingType>
Deprecating any old exposed interfaces but keeping for back compatibility.
Address info to avoid iterator on getRoutingType hotpath, like wise can be avoided where single RoutingType is passed in.
When an address is removed from the address manager its linked addresses
also need to be removed if there are no more bindings for the address.
Also adding a null check on bindings of linked addresses when a new
binding is added
The UTF translations has been improved by:
- zero copy on array based buffers
- zero copy UTF length calculation
- faster array access using Netty PlatformDependent.get|putByte
- improved perf tests UTF8Test
* Move byte util code into ByteUtil
* Re-use the new equals method in SimpleString
* Apply same pools/interners to client decode
* Create String to SimpleString pools/interners for property access via String keys (producer and consumer benefits)
* Lazy init the pools on withing the get methods of CoreMessageObjectPools to get the specific pool, to avoid having this scattered every where.
* reduce SimpleString creation in conversion to/from core message methods with JMS wrapper.
* reduce SimpleString creation in conversion to/from Core in OpenWire, AMQP, MQTT.
Replace GenericSQLProvider and other implementation by a single
PropertySQLProvider that uses properties to define SQL queries.
SQL queries are loaded from the journal-sql.properties file.
Queries specific to a DB dialect can be specified by adding a suffix to
the key of the generic property.
For example, the generic property to create a file Table is:
create-file-table = CREATE TABLE %s (ID BIGINT AUTO_INCREMENT, ...)
This property can be customized for Derby by using the
create-file-table.derby property:
create-file-table.derby=CREATE TABLE %s (ID BIGINT NOT NULL GENERATED ALWAYS AS IDENTITY (START WITH 1, INCREMENT BY 1),...
JIRA: https://issues.apache.org/jira/browse/ARTEMIS-1590
The test is using the wrong indices for the destinations it uses so they
don't match the one's created in the test support class. Because the
code is now using the default routing type the test fails when it tries
to send a message on a JMS Queue when the auto created address default
to the multicast routing type.
Expose User associated with creating Queue on JMX QueueControl (as attribute)
Allow setting of the user to associate with creating the queue when configured in broker.xml (before only if created over wire is it possible to set the user)
These tests used to have a wrong name, so they weren't executed by
Surefire during a `mvn test` run.
After enablement, the following tests are now failing:
* org.apache.activemq.artemis.tests.integration.cluster.ha.HAAutomaticBackupSharedStoreTest
* org.apache.activemq.artemis.tests.integration.ra.OutgoingConnectionNoJTATest
* org.apache.activemq.artemis.tests.unit.core.server.group.impl.SystemPropertyOverrideTest.testSystemPropertyOverride
When openwire client uses compressed option to send messages
(jms.useCompression=true) openwire client failed to receive them.
The reason is in OpenwireMessageConverter.toAMQMessage():
1. message.setContent() should be called after setting properties
(It will cause the compressed content to decompressed before delivering to clients)
2. message.onSend() should not be called here (it should be used
by producers. If used here it changes the internal flags of the
message and cause receive to fail).
Revert "ARTEMIS-1545 Adding HornetQ 2.4.7 on the mesh to validate send-acks"
I'm reverting this as the testsuite is broken..
We will send it back once worked out.
This reverts commit 8f5b7a1e73.
This reverts commit 9b982b3e30.
Apply fix so that when using JNDI via tomcat resource it works.
Replace original extract of JNDIStorable taken from Qpid, and use ActiveMQ5's as fits better to address this issue. (which primary use case is users migrating from 5.x)
Refactored ActiveMQConnectionFactory to externalise and turn into reference by StringRefAddr's instead of custom RefAddr which isnt standard.
Refactored ActiveMQDestinations similar
Refactored ActiveMQDestination to remove redundent and duplicated name field and ensured getters still behave the same
https://issues.apache.org/jira/browse/ARTEMIS-1546
- the dependency scan is changed to allow adding an extra repository
- adding groovy so we won't require compilation dependencies (just runtime)
without needing reflection (thanks Groovy :) )
- Adding hornetq to the mesh of version tests
Unsubscribe topic in clustered environment left open references to the core consumer. This patch properly closes the consumer which results in correct removal of the consumer reference on a remote queue.
Openwire clients create consumers to advisory topics to receive
notifications. As a result there are internal queues created
on advisory topics. Those consumer shouldn't be exposed via
management APIs which are used by the Console
To fix that the broker doesn't register any queues from
advisory addresses.
Also refactors a code to remove Openwire specific contants
from AddressInfo class.
I'm doing an overal improvement on large message support for AMQP
However this commit is just about a Bug on the converter.
It will be moot after all the changes I'm making, but I would rather keep this separate
as a way to cherry-pick on previous versions eventually.
This test starts 2 servers and send messages to
a queue until it enters into paging state. Then
it changes the address max-size to -1, restarts
the 2 servers again and consumes all the messages.
It verifies that even if the max-size has changed
all the paged messages will be depaged and consumed.
No stuck messages after restarting.
The tests is there to guard a case where messages
won't be depaged on server restart after the max-size
is changed to -1. This issue has been fixed into
master along with the fix for ARTEMIS-581, particularly
the changes to the method PagingStoreImpl.getMaxSize().
Server.stop is currently waiting completions on Sessions just because of test cases.
With the recent changes made into the Executors this is not needed any longer
Instead of flushing we just need to make sure there are no more calls into
page executors as we stop the PageManager.
This will avoid any possible starvations or deadlocks here.
The MappedSequentialFile relies on the assumption that any writers
won't exceed the maximum capacity of the file, leaving the JVM to crash otherwise.
This commit adds proper bounds checking on write operations (and position changes too)
in order to provide recoverable effects if such scenario should occour.
In addition are provided minor fixes on Mapped and Nio SequentialFile::fill behaviour
to match the original contract.
- Added Wait.assert methods, what would make it easier to assert on future conditions
- Moved Wait to artemis-junit, we are now using that module on the testsuite
The Critical analyzer is supposed to catch Deadlocks, and such
can only be resolved by killing the VM.
This test is using shutdown as it would be a bit more complex to
handle Byteman to then halt the VM. This will validate the
CriticalAnalyzer is capturing the event, and in such it would halt the VM.
Jiri Danek
Justin Bertram
Clebert Suconic
Shailendra Kumar Singh
Christopher L. Shannon (cshannon)
Howard Gao
Michael André Pearce
Martyn Taylor
JiriOndrusek
17103355
yang wei
Timothy Bish
Francesco Nigro
andytaylor
Robbie Gemmell
Benjamin Graf
Keith Wall
Johan Stenberg
saurabhrai
Christian Sailer
Ingo Weiss
Stanislav Knot
Tomas Hofman
Lionel Cons
Ulf Lilleengen
gtully
jpoth
raul.valdoleiros
Guillaume Nodet
Pat Fox
jostbg
Jeff Mesnil
shoukun
art-licis
xstefank
Tomas Kratky