Avoids pooling corner cases interacting with ARTEMIS 1843 + ARTEMIS 1861 improvements.
Also tagging ARTEMIS-1941 to note test needs altered along with it.
updates max frame size tests to verify behaviour seen with standalone
brokers rather than non represenative test-only conditions, as well
as more closely validate the recieved messages
1. Add tests case to verify issue and fix, tests also tests for same behavior using CORE, OPENWIRE and AMQP JMS Clients.
2. Update Core Client to check for queue before creating, sharedQueue as per createQueue logic.
3. Update ServerSessionPacketHandler to handle packets from old clients to perform to implement the same fix server side for older clients.
4. Correct AMQP protocol so correct error code is returned on security exception so that amqp jms can correctly throw JMSsecurityException
5. Correct AMQP protocol to check for queue exists before create
6. Correct OpenWire protocol to check for address exists before create
Configure a value of 128KB for AMQP max frame size by default to improve
overall performance and provide a limit on delivery size before chunking
begins.
Use new no copy variants for the delivery send and receive and make
use of the ReadableBuffer type that is now used to convery tranfer
payloads without a copy. Also set max outgoing frame size to match
the configured maxFrameSize for the AMQP protocol head to avoid the
case where an overly large frame can be written instead of chunking
a large message.
Make sure the correct buffer is used when decoding the stored Core
message that originated from the conversion of an AMQP message sent and
annotated as a JMS ObjectMessage which trips the large message boundary.
Alternate patch that doesn't copy the message bytes unless doing a
redelivery or skipping delivery annotations in the original version of
the message. Proton-J will copy the bytes provided to the Sender's send
method so a copy isn't necessary on most common sends.
This is good when you are a customer and an artemis engineer (e.g. me) asks your journal print-data but you can't do it because that would expose your user's data. If you do artemis data print --safe, that will only expose the journal structure without exposing user's data and eliminate any liability between the engineer and users.
Adding new metrics for tracking message counts and sizes on a Queue.
This includes tracking metrics for pending, delivering and scheduled
messages. The paging store also tracks message size now.
* Move byte util code into ByteUtil
* Re-use the new equals method in SimpleString
* Apply same pools/interners to client decode
* Create String to SimpleString pools/interners for property access via String keys (producer and consumer benefits)
* Lazy init the pools on withing the get methods of CoreMessageObjectPools to get the specific pool, to avoid having this scattered every where.
* reduce SimpleString creation in conversion to/from core message methods with JMS wrapper.
* reduce SimpleString creation in conversion to/from Core in OpenWire, AMQP, MQTT.
Apply fix so that when using JNDI via tomcat resource it works.
Replace original extract of JNDIStorable taken from Qpid, and use ActiveMQ5's as fits better to address this issue. (which primary use case is users migrating from 5.x)
Refactored ActiveMQConnectionFactory to externalise and turn into reference by StringRefAddr's instead of custom RefAddr which isnt standard.
Refactored ActiveMQDestinations similar
Refactored ActiveMQDestination to remove redundent and duplicated name field and ensured getters still behave the same
Use Map<String, Object> to access the ApplicationProperties section
which is the spec defined type for that section. This will prevent
breakage should proton-j be updated to reflect that in the definition of
that class.
This will cache the last query, optimizing most of the cases
This won't optimize the case where you are sending producers with different address,
but this is not the one I'm after now.
I'm doing an overal improvement on large message support for AMQP
However this commit is just about a Bug on the converter.
It will be moot after all the changes I'm making, but I would rather keep this separate
as a way to cherry-pick on previous versions eventually.
Extend test cases in MessageTypesTest to cover Core to AMQP combinations for all JMSTypeTests
Fix ServerJMSBytesMessage to correctly return bodyLength
Remove unused/dead code
Allows for JMS selectors on JMSCorrelationID as well as JMSXGroupID
and JMSXUserID along with some fixes to avoid an NPE case and fixes
to the conversion of AMQP MessageID and CorrelationID values when
doing cross protocol mappings. Adds new tests to cover more cases
of using the JMS selector with Qpid JMS and the AMQP test client.
Remove the unused transaction remove method as the getTransaction method
provides the remove operation and the remove method was doing an invalud
remove of wrong type from the transactions collection.
Added test case for cross protocol on JMSDeliveryMode proving issue, and asserting fix
Added fix to AmqpCoreConverter to ensure durability (JMSDeliveryMode) is retained.
Similar issue spotted with JMSPriority as with JMSDeliveyMode, fixing at the same time.
Added extra test case for jmspriority
Added fix for jmspriority
Avoid null checking each disposition before then checking the type, also
account for not knowing the type. Rearrange the handling code to
prioritize the most common case which is "Accepted"
Only reencode the Header on a Message when the redelivering the Message
to avoid overhead and unneeded modification to the original encoding of
the Header.
delegate to the jdk saslServer. Allow acceptor configuration of supported mechanismis; saslMechanisms=<a,b>
and allow login config scope for krb5 to be configured via saslLoginConfigScope=x
On completion of drain the response is not flushed and the
client can wait a few seconds before another broker task
flushes the work. Flush the connection after updating the
linked as being drained. Also perform the work with the
connection lock held to prevent conccurent update of proton
state.
Use AcitveMQDestination for subscription naming, fixing and aligning queue naming in the process.
The change is behind a configuration toggle so to avoid causing any breaking changes for uses not expecting.
Add test case, to prove the issue, and then obviously ensure it works, post fix.
Apply changes in logic of createQueueName to handle global better and fix the behaviour.
Create queues so names are same as behaviour with core client.
this will fix a few multiple protocol tests on ConsumerTests.
And a few other AMQP tests dealing with conversions.
You would get a classCastException without this commit.
If an error escapes into the event processing layer we close the
connection with an error condition to avoid the client becoming stuck on
waiting for a response from the broker and the broker side being in an
unknown state.
When creating some AMQP resources (senders, receivers, etc) the broker
can return an error of 'failed' instead of the security error that is
expected in these cases. In the case of a receiver being created and
a security error happening the broker fails to send back a response
causing the client to hang waiting for an attach response.
Broker should support full qualified queue names (FQQN)
as well as bare queue names. This means when clients access
to a queue they have two equivalent ways to do so. One way
is by queue names and the other is by FQQN (i.e. address::qname)
names. Currently only receiving is supported.
On link attach we currently default out SenderSettleMode to MIXED which
while legal doesn't truly reflect what the client asked for. We instead
now update the link to reflect the mode requested by the client
Also add some tests to ensure that we always return the
ReceiverSettleMode as FIRST since we don't support SECOND.
Broker should support full qualified queue names (FQQN)
as well as bare queue names. This means when clients access
to a queue they have two equivalent ways to do so. One way
is by queue names and the other is by FQQN (i.e. address::qname)
names. Currently only receiving is supported.
Resuse a single small buffer for all txn commands (declare / dischare) to
avoid creating lots of small arrays and ByteBuffer wrappers for txn operations.
Fix the getUserID and getTimestamp methods in AMQPMessage to read and
return the correct values. Adds some tests to cover these cases and
cleans up some others.
Ensure that the header value for priority is read and returned in a form
that is scaled such that it won't cause an IndexOutOfBoundsException
from the QueueImpl priority array. Adds some additional testing for
message priority support.
When I added flow control, some tests that were using reflection started to fail.
Also as a precaution I'm using <= on the flow control low credit check
When a message is sent to the broker with a TransactionState indicating
that the message should be included in a transaction the disposition from
the broker indicating acceptance of the message should be done using a
TransactionState value that contained the TX ID and the Accepted
disposition.
The coordinator needs to refill credit on the receiver once it has been
exhausted, otherwise the remote cannot send additional declare or
discharge commands to the broker.
As part of my refactoring on AMQP, the broker shouldn't rely on Application properties
for any broker semantic changes on delivery.
I am removing any access to those now, so we can properly deal with this post 2.0.0.
with this we could send and receive message in their raw format,
without requiring conversions to Core.
- MessageImpl and ServerMessage are removed as part of this
- AMQPMessage and CoreMessage will have the specialized message format for each protocol
- The protocol manager is now responsible to send the message
- The message will provide an encoder for journal and paging
Adds tests for handling of Rejected, Released and Modified outcomes for
a delivery sent to a receiver. Tests show that for the Modified outcome
the broker is redelivering the message to the same receiver when the
undeliverable here value is set which violates the AMQP 1.0 specified
handling of that field. Also for Rejected outcome the broker should
be sending the rejected message to the DLQ as Rejected is supposed to
be a terminal outcome.
Small fix included to not adjust the delivery count if the Modified
outcome does not indicate that the delivery failed.
If the SASL plain mechanism arrives with the authzid value set the
mechanism needs to account for its presence and use the correct fields
of the exchange to get the username and password values. Adds some
tests to validate this fix.
The broker needs to return only the filters that are supported on a
receiver attach otherwise the remote is not aware that the broker is not
able to honor the requested configuration of the receiver.
Refactor the AMQP Message transformers both for better performance and
also to fix a number of issues with the transformers creating inbound
and outbound messages with incorrectly mapped values or extra data
appended where it should not be.
Removes the append of the destination annotations from the outbound JMS
transformer as the legacy client has be unsupported at Qpid for quite
some time now.
Since we don't need client implementations any longer, given the maturity level of
qpid jms, these classes can go, as a result a lot of the interfaces can be removed.
As part of this I am removing proton-plug, and reorganizing the packages in a way I think it
makes more sense and easier to other developers to understand and maintain it.
https://issues.apache.org/jira/browse/ARTEMIS-751
QueueQuery was previously used instead of checking for bindings on a
particular address name. This meant sending and receiving only worked
for those queues that happened to have the same queueName to address.
This patch replaces this with binding check.
There's also some minor ProtonTest fixes included.
When converted to a core message type the original type of the
CorrelationId in the AMQP message is lost, we must encode the type to
prevent the loss of the original type as this value is meant to be
immutable.
TheJMSVendor protocol convertor class was not creating the destinations so any destination calls, setTo and setJMSReplyTo, were ignored. Ive added a server side destination class to bypass the naming checks we have on the client and this now sets everything correctly
https://issues.apache.org/jira/browse/ARTEMIS-453
https://issues.apache.org/jira/browse/ARTEMIS-463
This will have some extra refactoring on the protocol head, transferring responsibility to the broker classes in a lot of cases
and removing some duplicated code
This was a team effort from Clebert Suconic and Howard Gao
Clebert Suconic
Robbie Gemmell
Keith Wall
Michael André Pearce
Timothy Bish
Ulf Lilleengen
gtully
Christopher L. Shannon (cshannon)
Stanislav Knot
jostbg
Justin Bertram
Todd Baert
Andy Taylor
saurabhrai
Howard Gao
Robert Godfrey
Martyn Taylor
Francesco Nigro
Jiri Danek
Will Reichert
Dmitrii Tikhomirov
Ville Skyttä
Gordon Sim
bayern39
gautric
Christian Schneider