PagingStore is supposed to send an event to replica on every file that is closed.
There are a few situation where the sendClose is being missed and that could generate leaks on the target
in this commit I'm storing a binding record with the address-settings for the correct size
this is also validating eventual merges of the AddressSettings in the same namespace.
This is a list of improvements done as part of this commit / task:
* Page Transactions on mirror target are now optional.
If you had an interrupt mirror while the target destination was paging, duplicate detection would be ineffective unless you used paged transactions
Users can now configure the ack manager retries intervals.
Say you need some time to remove a consumer from a target mirror. The delivering references would prevent acks from happening. You can allow bigger retry intervals and number of retries by tinkiering with ack manager retry parameters.
* AckManager restarted independent of incoming acks
The ackManager was only restarted when new acks were coming in. If you stopped receiving acks on a target server and restarted that server with pending acks, those acks would never be exercised. The AckManager is now restarted as soon as the server is started.
When creating internal temporary queues for the federation control links and the
events link we should use a structured naming convention to ease in configuring
security for the federation user where all internal names fall under a root prefix
which can be used to grant read and write access for the federation user. This
change allows security on the wildcarded address "$ACTIVEMQ_ARTEMIS_FEDERATION.#".
This change also includes some further restrictions added to federation resources
and adds support for wildcarding '$' prefixed addresses.
Correct the XML parser for core federation queue match policy loading
to call the setQueueMatch instead of setAddressMatch when reading the
queue match element.
Redistribution would add data to the record which would then in turn make the record too large to redistribute.
The Redistributor and Bridges should not be removed.
Also a warning should be added to warn users about the situation.
In the detectAndReportRenewSlowness() method, the logger.error() and
logger.warn() methods are called 3 times.
In two of the three calls, the method arguments correspond to parameters
that are tested in the if() conditional construct.
Also, the arguments of the logger.error() and logger.warn() methods are
identical in lines 139 and 141, respectively, which may indicate that
they were copied incorrectly.
This commit does the following:
- Updates HA docs including the chapter on network isolation (i.e.
split brain). The network isolation chapter is now more about
high-level explanation and the HA doc now has all the configuration
parameters.
- Changes references to "pluggable quorum voting" to "pluggable lock
manager." The pluggable functionality really isn't about voting.
Conceptually is much more like the functionality you'd get from a
distributed lock so this naming is more clear. Both the docs and the
code have been changed.
- Reorganize lock manager modules as sub-modules. The API and RI
modules are renamed, but that should be OK based on the
"experimental" tag that's been on this feature up to this point.
- Remove the "experimental" tag from the lock manager.
These changes will not break folks using the standalone broker. However,
they will break folks embedding the broker *if* they are using the
artemis-quorum-ri or artemis-quorum-api modules or the
o.a.a.a.c.c.h.DistributedPrimitiveManagerConfiguration class.
There are no functional changes here. Renaming these modules is more a
conceptual change to facilitate better documentation and increased
adoption.
Whenever we create a queue with a filter we're instantiating 3 different
`org.apache.activemq.artemis.core.filter.impl.FilterImpl` objects. This
is wasteful and entirely avoidable.
This is particularly true for the Mirrored SNF queue. Redistribution is not meant for internal queues. If an internal queue happens to have the same name on another server, it should not trigger redistribution when consumers are removed.
It would be possible to work around this by adding an address-setting specific to the address with redistribution disabled.
ClusteredMirrorSoakTest was intermittently failing because of this. For a few seconds while the mirror connection is still being made connections could move messages from one node towards another node if both have the same name.
This fills in the gaps for some missing parameters in the core bridge
documentation as well as fixes the example so it's actually valid
according to the XSD.
Currently when an MQTT topic filter contains characters from the
configured wildcard syntax the conversion to/from this syntax breaks.
For example, when using the default wildcard syntax if an MQTT topic
filter contains a . the conversion from the MQTT wildcard syntax to the
core wildcard syntax and back will result in the `.` being replaced with
a `/.`.
This commit fixes that plus a few other things...
- Implements proper conversions to/from one WildcardConfiguration to
another.
- Refactors the MQTT code which invokes these conversion methods. This
includes simplifying a lot of test code.
- Adds lots of tests for everything.
- Clarifies some variable naming to better distinguish between core and
MQTT.
- Move ActiveMQTestBase to artemis-test-support.
- Add reduced parent for current artemis-server tests.
- Add a simpler test case parent class unit tests can use.
- Convert some existing checks into a rule for reuse.
- Move various rules/utils to artemis[-unit]-test-support module from where they can be used instead of from artemis-server.
This commit:
- Eliminates MQTT session storage on every successful connection.
Instead data is only written when subsriptions are created or
destroyed.
- Adds a configuration property for the storage timeout.
- Updates the documentation with relevant information.
- Refactors a few bits of code to eliminate unnecessary variables, etc.
in cluster.
When we know that a node leaves a clustercleanly we shouldn't log WARN
messages about it.
Signed-off-by: Emmanuel Hugonnet <ehugonne@redhat.com>
Allows the configuration of AMQP Federation broker connections to be updated and
reloaded. This allows for update, add or remove of AMQP federation broker connections
as well as the basic AMQP sender and receiver broker connections. It checks for and
ignores changes in AMQP broker connections that are performing Mirroring as that
would lead to issues that can break mirroring.
I just did some static analysis of this code, and I believe it would be better to first add to the list
before setting the cancel task.
Reason for that is in case the Runnable is dequeued between the add in the deQueue and setting the cancel task.
Possibility is remote but my OCD wouldn't let me ignore this small possibility.
There is a race condition between ConnectionEntry.ttl and
FailureCheckAndFlushThread whereby an in-vm connection may get closed
inadvertently due to a TTL timeout. This is because ConnectionEntry.ttl
is initialized to 60000 and then later set to -1 upon the initial Ping.
If this update happens at *just* the right time in
FailureCheckAndFlushThread then the connection will be closed.
The fix ensures that the ConnectionEntry.ttl is set to -1 for in-vm
connections from the start. It also eliminates the possibility of the
race in FailureCheckAndFlushThread.
This fix is based on static analysis of the code. The timing window is
just too small to contruct a reliable test. The failure has only been
seen in the wild a handful of times.
When initially developed the expectation was that no more producers would keep connecting but in a scenario like this
the consumers could actually give up and things will just accumulate on the server.
We should cleanup these upon disconnect.
- Async commit
* async here meaning the recording of the commit record is not doing a sync on the storage.
This is useful for internal operations where we don't need an immediate sync on the journal storage.
- Wired notification
* I need finer control on a afterWired (to the storage) and before the completions, so I can plug the sync context on mirror right before the commit is called.
This commit does the following:
- Replaces non-inclusive terms (e.g. master, slave, etc.) in the
source, docs, & configuration.
- Supports previous configuration elements, but logs when old elements
are used.
- Provides migration documentation.
- Updates XSD with new config elements and simplifies by combining some
overlapping complexTypes.
- Removes ambiguous "live" language that's used with regard to high
availability.
- Standardizes use of "primary," "backup," "active," & "passive" as
nomenclature to describe both configuration & runtime state for high
availability.
This commit does the following:
- prevents a large stack trace when the user-supplied message filter
has errors
- improves feedback to user for filter-validity
- indents the search-field in the "Browse Queue" screen same as on
other screens
- fixes a spelling error in a nearby comment
m.napieraj
Clebert Suconic
Gary Tully
Justin Bertram
Timothy Bish
a181321
Alvin Kwekel
Domenico Francesco Bruscino
aslepykh
Jan Šmucr
Alexey Markevich
Maverick19841972
Robbie Gemmell
Howard Gao
Pavel Perikov
Emmanuel Hugonnet
Andy Taylor
Todor Neykov
Erwin Dondorp