This commit does the following:
- Deprecates existing overloaded createQueue, createSharedQueue,
createTemporaryQueue, & updateQueue methods for ClientSession,
ServerSession, ActiveMQServer, & ActiveMQServerControl where
applicable.
- Deprecates QueueAttributes, QueueConfig, & CoreQueueConfiguration.
- Deprecates existing overloaded constructors for QueueImpl.
- Implements QueueConfiguration with JavaDoc to be the single,
centralized configuration object for both client-side and broker-side
queue creation including methods to convert to & from JSON for use in
the management API.
- Implements new createQueue, createSharedQueue & updateQueue methods
with JavaDoc for ClientSession, ServerSession, ActiveMQServer, &
ActiveMQServerControl as well as a new constructor for QueueImpl all
using the new QueueConfiguration object.
- Changes all internal broker code to use the new methods.
Using a property on AMQPLargeMessage instead of a ThreadLocal
This was causing issues on the journal as the message may transverse different threads on the journal.
KMPNeedle::searchInto has been specialized and copied
to handle ReadableBuffer in order to save polymorphic
calls on it that would make it slower on hot paths.
The drain control has to immediately flush
otherwise a next flow control event may remove the previous status from Proton.
So, this really cannot wait the next executor, and it has to be done immediately.
This is a Large commit where I am refactoring largeMessage Body out of CoreMessage
which is now reused with AMQP.
I had also to fix Reference Counting to fix how Large Messages are Acked
And I also had to make sure Large Messages are transversing correctly when in cluster.
There is an optimization in AMQP, that properties are only parsed over demand.
It happens that after ARTEMIS-2294 (commit 2dd0671698),
every send would request for the property on the message, resulting the properties to always be parsed upon send.
Even when there's no use of application properties.
When AMQPMessages are redistributed from one node to
another, the internal property of message is not
cleaned up and this causes a message to be routed
to a same queue more than once, causing duplicated
messages.
When converting from AMQP to core and back again support annotations that
aren't able to be placed into Core message properties by storing the bytes
from encoding the types to AMQP encodings and then decoding them again
when converting back into AMQP messages.
Requires update to proton-j 0.33.2 for encoding fix
If a jms client (be it openwire, amqp, or core jms) receives a message that
is from a different protocol, the JMSMessageID maybe null when the
jms client expects it.
Remove scheduled tasks when a client disconnects to allow garbage
collector to delete the unused proton objects. Add a the unity test
AMQPConnectionContextTest to check leaks after close.
When user attempts unauthorized anonymous sasl the broker can return an
error of 'failed' instead of the security error that is expected in
these cases.
* Upgrading versions
* Adding wildfly-common dependency as jboss-logmanager now depends on it
for simple common operations such as getting hostname or process id
* Updating bootclasspath with wildfly-common
Add test that exhibits the issue when sending AMQP (non JMS) to Artemis that one mapping to Core JMS the destination is not resolving as the RoutingType can be missing.
Add fix.
Add consumer priority support
Includes refactor of consumer iterating in QueueImpl to its own logical class, to be able to implement.
Add OpenWire JMS Test - taken from ActiveMQ5
Add Core JMS Test
Add AMQP Test
Add Docs
There's a *slight* semantic change with the behavior of the queue query
and binding query to make them consistent with the address query, namely
that they will return the name of the queue and the name of the address
in every case and the returned names will be not use the FQQN syntax but
will be parsed to reflect their actual names in the broker.
If a client sends a message to a multicast address and using a qpid-jms
client to receive the message from one of the queues using fully
qualified queue name will fail with following error message:
Address xxxx is not configured for queue support
[condition = amqp:illegal-state]
It should be able to receive the message without any error.
These improvements were also part of this task:
- Routing is now cached as much as possible.
- A new Runnable is avoided for each individual message,
since we use the Netty executor to perform delivery
https://issues.apache.org/jira/browse/ARTEMIS-2205
Update to latest proton-j release and refactor the dispostion code to use
the new type enums to better deal with the dispistions. Updates to Qpid JMS
0.37.0 which still uses the current netty 4.1.28.Final dependency.
Refactor ServerJMSMessage so it correctly transposes all JMSX headers.
Push common JMSX mappings for JMS to Message Interface mappings into MessageUtil to avoid duplication in ActiveMQMessage and ServerJMSMessage
With AMQP protocol when some messages are received in a transaction,
calling JMX QueueControl.listDeliveringMessages() returns empty list
before the transaction is committed.
Add test cases
Add GroupSequence to Message Interface
Implement Support closing/reset group in queue impl
Update Documentation (copy from activemq5)
Change/Fix OpenWireMessageConverter to use default of 0 if not set, for OpenWire as per documentation http://activemq.apache.org/activemq-message-properties.html
GlobalDiskFullTest was broken before this fix.
Basically when using multiple addresses over a session you would miss flow credits on all your producers except to the first one
that ran out of credit.
This is fixing the test org.apache.activemq.artemis.tests.integration.amqp.DivertTopicToQueueTest
This test was broken because the copy wouldn't use the Buffer view gotten by data.duplicate().
Add Concurrency Test to expose concurrency errors seen in logs.
Add Fix to ensure TypedProperties to ensure threadsafety
Add forEach and forEachKey to allow for provide a thread safe way of iterating through keys and values, without needing to duplicate the collection.
Add getMapNames method to remove code duplication and to ensure thread safe
Major refactoring of the AMQPMessage abstraction to resolve
some issue of message corruption still present in the code and
improve the API handling of message changes and re-encoding.
Improves handling of decoding of message sections limiting the
work to only the portions needed and ensuring the state data
is always updated with what has been done. Fixes issues of
corrupt state on copy of message or other changes in filters.
Ensure that the Body of the message is never decoded in the partial
decode phase of the message processing and also gaurd against the
decode of ApplicationProperties which should be done lazily. Add
lazy decode of DeliveryAnnotations as they are not used at present.
Cleans up some of the code on the proton event handler, most noteable:
1. Fix IOCallback creation on each outbound send, use single instance
as the handler only ever does a flush and has no attached state.
2. Fix redundent locking and unlocking of connection lock on the event
path that already ensures that lock is held.
3. Set presettle state on the server sender at attach as it cannot
change afterwards so checking on every message is not needed.
4. Improve buffer type checking on receive to reduce amount of work
Once a re-encode of the message is done the buffer is not being marked
as valid and so subsequent checks on the buffer are all assuming the
message data is not valid and re-encoding over and over. This can lead
to poor performance in some cases and corrupted data in others.
Avoid firing the offerProducerCredit code when we know that the credit
isnt low enough that a refill is needed, which avoids lock contention
and garbage creation as each inbound message is processed.
Ensure the broker looks at local receiver credit when checking for
credit top off threshold and then do a proper top off back to the high
water mark to sync with how client receivers manage their credit.
Update the Qpid JMS and Proton dependencies to lastest and sync Netty
with the 4.1.28.Final version used by Qpid JMS to avoid clash that
breaks a test. Adds override of new Proton-J WritableBuffer API that
allows it to use the Netty String encoder when needed instead of the
slower default version.
Update Qpid JMS to v0.36.0
Proton-J to v0.29.0
Netty to 4.1.28.Final
Anonymous senders (those created without a target address) are not
blocked when max-disk-usage is reached. The cause is that when such
a sender is created on the broker, the broker doesn't check the
disk/memory usage and gives out the credit immediately.
When "large" messages are converted to / from core in order to be stored
in the large message store the type of the AMQP body section is being
lost and reconstituted incorrectly in some cases. The message needs to
be annotated with the original AMQP type for the body and that used to
manage the conversion back to AMQP from Core.
Avoids pooling corner cases interacting with ARTEMIS 1843 + ARTEMIS 1861 improvements.
Also tagging ARTEMIS-1941 to note test needs altered along with it.
updates max frame size tests to verify behaviour seen with standalone
brokers rather than non represenative test-only conditions, as well
as more closely validate the recieved messages
1. Add tests case to verify issue and fix, tests also tests for same behavior using CORE, OPENWIRE and AMQP JMS Clients.
2. Update Core Client to check for queue before creating, sharedQueue as per createQueue logic.
3. Update ServerSessionPacketHandler to handle packets from old clients to perform to implement the same fix server side for older clients.
4. Correct AMQP protocol so correct error code is returned on security exception so that amqp jms can correctly throw JMSsecurityException
5. Correct AMQP protocol to check for queue exists before create
6. Correct OpenWire protocol to check for address exists before create
Configure a value of 128KB for AMQP max frame size by default to improve
overall performance and provide a limit on delivery size before chunking
begins.
Use new no copy variants for the delivery send and receive and make
use of the ReadableBuffer type that is now used to convery tranfer
payloads without a copy. Also set max outgoing frame size to match
the configured maxFrameSize for the AMQP protocol head to avoid the
case where an overly large frame can be written instead of chunking
a large message.
Make sure the correct buffer is used when decoding the stored Core
message that originated from the conversion of an AMQP message sent and
annotated as a JMS ObjectMessage which trips the large message boundary.
Alternate patch that doesn't copy the message bytes unless doing a
redelivery or skipping delivery annotations in the original version of
the message. Proton-J will copy the bytes provided to the Sender's send
method so a copy isn't necessary on most common sends.
This is good when you are a customer and an artemis engineer (e.g. me) asks your journal print-data but you can't do it because that would expose your user's data. If you do artemis data print --safe, that will only expose the journal structure without exposing user's data and eliminate any liability between the engineer and users.
Adding new metrics for tracking message counts and sizes on a Queue.
This includes tracking metrics for pending, delivering and scheduled
messages. The paging store also tracks message size now.
* Move byte util code into ByteUtil
* Re-use the new equals method in SimpleString
* Apply same pools/interners to client decode
* Create String to SimpleString pools/interners for property access via String keys (producer and consumer benefits)
* Lazy init the pools on withing the get methods of CoreMessageObjectPools to get the specific pool, to avoid having this scattered every where.
* reduce SimpleString creation in conversion to/from core message methods with JMS wrapper.
* reduce SimpleString creation in conversion to/from Core in OpenWire, AMQP, MQTT.
Apply fix so that when using JNDI via tomcat resource it works.
Replace original extract of JNDIStorable taken from Qpid, and use ActiveMQ5's as fits better to address this issue. (which primary use case is users migrating from 5.x)
Refactored ActiveMQConnectionFactory to externalise and turn into reference by StringRefAddr's instead of custom RefAddr which isnt standard.
Refactored ActiveMQDestinations similar
Refactored ActiveMQDestination to remove redundent and duplicated name field and ensured getters still behave the same
Dirkjan Ochtman
Justin Bertram
Clebert Suconic
Federico Valeri
Francesco Nigro
Michael Pearce
Sebastian Thomschke
brusdev
Keith Wall
Howard Gao
Ulf Lilleengen
Timothy Bish
Emmanuel Hugonnet
Luis De Bello
Carsten Lohmann
Jiri Danek
andytaylor
Robbie Gemmell
gtully
Christopher L. Shannon (cshannon)
Stanislav Knot
jostbg