add the adaptTransportConfiguration() method to the
ClientProtocolManagerFactory so that transport configurations used by
the ClientProtocolManager have an opportunity to adapt their transport
configuration.
This allows the HornetQClientProtocolManagerFactory to adapt the
transport configuration received by remote HornetQ broker to replace the
HornetQ-based NettyConnectorFactory by the Artemis-based one.
JIRA: https://issues.apache.org/jira/browse/ARTEMIS-1431
If message senders and receivers uses different
wireformat.tightEncodingEnabled options, broker will get marshalling
problem. This is because when openwire messages are converted to
core messages, and later these core messages converted to openwire
messages, the broker uses a mashaller that comes with the connection
used to carry the messages.
For example, if a producer sents a message using option "wireformat
.tightEncodingEnabled=false" and a receiver tries to receive it
using 'true' for the same option, it'll never get it because the
broker will fail to use a "tight encoding" marshaller to
decode a 'loose encoded' message.
To fix the problem, we always use 'tight encoding' for internal
message converters.
Remove some redundant code in the processing of the OpenWire Destination
name, both in the topic handler and in the method in general the
destination name only needs to be converted once and only one
SimpleString instance needs to be created from that which will then feed
all the places that either the String form or the SimpleString form of
the result is needed.
By default, every openwire connection will create a queue
under the multicast address ActiveMQ.Advisory.TempQueue.
If a openwire client is create temporary queues these queues
will fill up with messages for as long as the associated
openwire connection is alive. It appears these messages
do not get consumed from the queues.
The reason behind is that advisory messages don't require
acknowledgement so the messages stay at the queue.
Remove the unused transaction remove method as the getTransaction method
provides the remove operation and the remove method was doing an invalud
remove of wrong type from the transactions collection.
Added test case for cross protocol on JMSDeliveryMode proving issue, and asserting fix
Added fix to AmqpCoreConverter to ensure durability (JMSDeliveryMode) is retained.
Similar issue spotted with JMSPriority as with JMSDeliveyMode, fixing at the same time.
Added extra test case for jmspriority
Added fix for jmspriority
Avoid null checking each disposition before then checking the type, also
account for not knowing the type. Rearrange the handling code to
prioritize the most common case which is "Accepted"
Only reencode the Header on a Message when the redelivering the Message
to avoid overhead and unneeded modification to the original encoding of
the Header.
Fix for MQTT in connect due to deprecated methods bug causing NPE, call new methods and null check ourselves.
Also raised https://github.com/netty/netty/issues/7076 upstream but i guess we will keep this, as the old methods are deprecated anyhow.
delegate to the jdk saslServer. Allow acceptor configuration of supported mechanismis; saslMechanisms=<a,b>
and allow login config scope for krb5 to be configured via saslLoginConfigScope=x
On completion of drain the response is not flushed and the
client can wait a few seconds before another broker task
flushes the work. Flush the connection after updating the
linked as being drained. Also perform the work with the
connection lock held to prevent conccurent update of proton
state.
Add krb5sslloginmodule that will populate userPrincipal that can be mapped to roles independently
Generalised callback handlers to take a connection and pull certs or peerprincipal based on
callback. This bubbled up into api change in securitystore and security manager
Use AcitveMQDestination for subscription naming, fixing and aligning queue naming in the process.
The change is behind a configuration toggle so to avoid causing any breaking changes for uses not expecting.
Adds headers AMQ_SCHEDULED_DELAY and AMQ_SCHEDULED_TIME to STOMP
protocol handling to allow for delayed and scheduled time of a
message. The AMQ_SCHEDULED_DELAY brings forward the same option
from the 5.x broker and the AMQ_SCHEDULED_TIME option adds a fixed
time of delivery alternative to match that of AMQP and others.
Add test case, to prove the issue, and then obviously ensure it works, post fix.
Apply changes in logic of createQueueName to handle global better and fix the behaviour.
Create queues so names are same as behaviour with core client.
this will fix a few multiple protocol tests on ConsumerTests.
And a few other AMQP tests dealing with conversions.
You would get a classCastException without this commit.
If an error escapes into the event processing layer we close the
connection with an error condition to avoid the client becoming stuck on
waiting for a response from the broker and the broker side being in an
unknown state.
Multiplication operations where the operands have type `int` but the
result is cast to `long` may lead to overflow.
Fixes two instances of this problem, by ensuring the operands are cast
to `long` during multiplication.
This resolves the "Result of integer multiplication cast to long"
alerts at https://lgtm.com/projects/g/apache/activemq-artemis/alerts.
When creating some AMQP resources (senders, receivers, etc) the broker
can return an error of 'failed' instead of the security error that is
expected in these cases. In the case of a receiver being created and
a security error happening the broker fails to send back a response
causing the client to hang waiting for an attach response.
Broker should support full qualified queue names (FQQN)
as well as bare queue names. This means when clients access
to a queue they have two equivalent ways to do so. One way
is by queue names and the other is by FQQN (i.e. address::qname)
names. Currently only receiving is supported.
On link attach we currently default out SenderSettleMode to MIXED which
while legal doesn't truly reflect what the client asked for. We instead
now update the link to reflect the mode requested by the client
Also add some tests to ensure that we always return the
ReceiverSettleMode as FIRST since we don't support SECOND.
Broker should support full qualified queue names (FQQN)
as well as bare queue names. This means when clients access
to a queue they have two equivalent ways to do so. One way
is by queue names and the other is by FQQN (i.e. address::qname)
names. Currently only receiving is supported.
Resuse a single small buffer for all txn commands (declare / dischare) to
avoid creating lots of small arrays and ByteBuffer wrappers for txn operations.
Fix the getUserID and getTimestamp methods in AMQPMessage to read and
return the correct values. Adds some tests to cover these cases and
cleans up some others.
Ensure that the header value for priority is read and returned in a form
that is scaled such that it won't cause an IndexOutOfBoundsException
from the QueueImpl priority array. Adds some additional testing for
message priority support.
When populate-validated-user = true AMQP messages can cause exceptions.
This feature isn't particularly applicable to AMQP so this commit
eliminates the exception and leaves the AMQP messages untouched
even if populate-validated-user = true. In other words,
populate-validated-user + AMQP is not supported.
When I added flow control, some tests that were using reflection started to fail.
Also as a precaution I'm using <= on the flow control low credit check
When a message is sent to the broker with a TransactionState indicating
that the message should be included in a transaction the disposition from
the broker indicating acceptance of the message should be done using a
TransactionState value that contained the TX ID and the Accepted
disposition.
The coordinator needs to refill credit on the receiver once it has been
exhausted, otherwise the remote cannot send additional declare or
discharge commands to the broker.
As part of my refactoring on AMQP, the broker shouldn't rely on Application properties
for any broker semantic changes on delivery.
I am removing any access to those now, so we can properly deal with this post 2.0.0.
with this we could send and receive message in their raw format,
without requiring conversions to Core.
- MessageImpl and ServerMessage are removed as part of this
- AMQPMessage and CoreMessage will have the specialized message format for each protocol
- The protocol manager is now responsible to send the message
- The message will provide an encoder for journal and paging
When openwire sends back an exception response, it doesn't set
the correct correlation id. This causes the client to miss the
response and the exception won't get caught.
To fix it we need to add the correlation id before sending.
When sending an empty ObjectMessage, broker doesn't
write a 'length' field to the message buffer. In delivery
the broker tries to read the length from the buffer, which
causes "IndexOutOfBoundsException".
To fix it, we need to check if the buffer is empty or not,
and only read it if the buffer is not empty.
When a producer sends a messages to a temp destination created from
another connection, it fails. The reason behind it is that the
producer's connection didn't receive the advisory message (notification)
from broker about this temp destination, and it will throw an exception
if it doesn't know this temp destination.
The fix is send the advisory to the client so that it knows this destination.
When creating a 'no-local' openwire consumer, it doesn't work,
meaning it can still receive messages from the same connection.
The fix is similar to what Artemis client does, which is adding
a 'filter' to the consumer/subscription.
The difference is that with OpenWire we have to do it on the
broker side.
Adds tests for handling of Rejected, Released and Modified outcomes for
a delivery sent to a receiver. Tests show that for the Modified outcome
the broker is redelivering the message to the same receiver when the
undeliverable here value is set which violates the AMQP 1.0 specified
handling of that field. Also for Rejected outcome the broker should
be sending the rejected message to the DLQ as Rejected is supposed to
be a terminal outcome.
Small fix included to not adjust the delivery count if the Modified
outcome does not indicate that the delivery failed.
If the SASL plain mechanism arrives with the authzid value set the
mechanism needs to account for its presence and use the correct fields
of the exchange to get the username and password values. Adds some
tests to validate this fix.
The broker needs to return only the filters that are supported on a
receiver attach otherwise the remote is not aware that the broker is not
able to honor the requested configuration of the receiver.
Refactor the AMQP Message transformers both for better performance and
also to fix a number of issues with the transformers creating inbound
and outbound messages with incorrectly mapped values or extra data
appended where it should not be.
Removes the append of the destination annotations from the outbound JMS
transformer as the legacy client has be unsupported at Qpid for quite
some time now.
Since we don't need client implementations any longer, given the maturity level of
qpid jms, these classes can go, as a result a lot of the interfaces can be removed.
As part of this I am removing proton-plug, and reorganizing the packages in a way I think it
makes more sense and easier to other developers to understand and maintain it.
https://issues.apache.org/jira/browse/ARTEMIS-751
max-disk-usage = how much of a disk we can use before the system blocks
global-max-size = how much bytes we can take from memory for messages before we start enter into the configured page mode
This will also change the default created configuration into page-mode as that's more reliable for systems.
QueueQuery was previously used instead of checking for bindings on a
particular address name. This meant sending and receiving only worked
for those queues that happened to have the same queueName to address.
This patch replaces this with binding check.
There's also some minor ProtonTest fixes included.
I changed the message for TTL timeouts because the existing message was
a bit verbose and a bit speculative. Also, now that the broker supports
more protocols the bit about connection-ttl and
client-failure-check-period is less relevant.
When converted to a core message type the original type of the
CorrelationId in the AMQP message is lost, we must encode the type to
prevent the loss of the original type as this value is meant to be
immutable.
The sender abstraction must be able to update its sender address in the
case of dynamic senders whose target address is not set until the code
initializes the link and creates a destination for it.
There is a race condition in the ProtonHandlerImpl.outputBuffer()
method. The method checks to see how many bytes (n) are pending in the
underlying ProtonJ buffer, then creates a Netty buffer of size n. It
then writes the contents of the pending ProtonJ head. However, ProtonJ
can still write to it's internal buffer, meaning that it's buffer.size >
n causing an illegalArgumentException. This patch fixes it by only
writing 'n' bytes to the Netty buffer.
Implements a new feature for the broker whereby it may automatically create and
delete JMS topics which are not explicitly defined through the management API
or file-based configuration. A JMS topic is created in response to a sent
message or connected subscriber. The topic may subsequently be deleted when it
no longer has any subscribers. Auto-creation and auto-deletion can both be
turned on/off via address-setting.
Fixes: ARTEMIS-397
From mqtt specs:
“If the Keep Alive value is non-zero and the Server does not receive a
Control Packet from the Client within one and a half times the Keep
Alive time period, it MUST disconnect the Network Connection to the
Client as if the network had failed [MQTT-3.1.2-24]. “
OptimizedAckTest: Using core api to replace old activemq
broker API to checking message count.
JmsQueueTransactionTest#testCloseConsumer: a bug in
delivery when prefetchSize is 0.
(InitalReconnectDelayTest)close connection after test.
Temp Queue not deleted when connection is closed.
Enable Stomp in openwire test because some test uses it.
Remove unused code in opwnwire
Wrong XA error code returned when xid is missing
(ActiveMQXAConnectionFactory.testRollbackXaErrorCode)
regression in ActiveMQSslConnectionFactoryTest (SSL related)
TheJMSVendor protocol convertor class was not creating the destinations so any destination calls, setTo and setJMSReplyTo, were ignored. Ive added a server side destination class to bypass the naming checks we have on the client and this now sets everything correctly
https://issues.apache.org/jira/browse/ARTEMIS-453
Justin Bertram
Jens Reimann
Jiri Danek
Jeff Mesnil
Robbie Gemmell
Howard Gao
Timothy Bish
gtully
Michael Andre Pearce
Martyn Taylor
Clebert Suconic
Otavio R. Piske
Odyldzhon Toshbekov
Helge Waastad
Ingo Weiss
Ulf Lilleengen
Andy Taylor
Aditya Sharad
Francesco Nigro
Dejan Bosanac
Will Reichert
jbertram
Ville Skyttä
Dmitrii Tikhomirov
Ryan Yeats
Paul Gallagher
Gordon Sim
bayern39
John D. Ament
Erich Duda
Diego Bes