- Added a thread pool executor, that combines cached and fixed size thread pooling.
It behaves like a cached thread pool in that it reuses exising threads and removes
idle threads after a timeout, limits the maximum number of threads in the pool, but
queue additional request instead of rejecting them.
- changed existing code to use the new thread pool instead of a fixed-size thread pool in
all places that are configured with a client thread pool size.
When NettyConnection.classSSLAndChannel is called from the EventLoop,
waiting for the SSL handler to close will always take 10 seconds, because
the sslCloseFuture is from a task that is scheduled with the same
EventLoop. But since the EventLoop is a single threaded executor, it
will only be executed after the current task is completed.
Due to the single threaded nature of the EventLoop, all blocking calls
should be avoided. Therefore, I removed both awaitUninterruptibly calls
if the closing happens within an event loop tasks. As a side effect,
the annoying server log timeout warnings will go away.
Changed the ActiveMQClient interface to expose global thread pools as
ExecutorService and ScheduledExecutorService interface. This is necessary
to allow injecting thread pool implementations that are not based on
ThreadPoolExecutor or ScheduledThreadPoolExecutor.
1. Changed public fields in ActiveMQClient to private and added getters.
Exposing fields for thread pool sized allow to modify them in undesired ways.
I made these fields private and added corresponding getter methods.
In addition, I renamed the field 'globalThreadMaxPoolSize'
to 'globalThreadPoolSize' to be more consistent with the
'globalScheduledThreadPoolSize' field name.
I also adapted some tests to always call clearThreadPools after
the thread pool size configuration has been changed.
2. Protect against injecting null as thread pools
ActiveMQClient.injectPools allowed null as injected thread pools.
The effect was that internal threads pools were created,
but not shutdown correctly.
Adapted code to handle -1 correctly to configure an unbounded thread pool.
In addition, I removed the capability to reconfigure the max pool size
of existing thread pools, because the global thread pool can either be
an unbounded cached pool, or a bounded fixed size pool.
These 2 kinds of pool also differ in the used blocking queue,
therefore cannot be converted into each other.
Communication between nodes will fail under certain topologies
JGroups has something called JForkChannel that could be used on container systems.
And be injected into Artemis.
For some reason that channel cannot be reused for more than one channel per VM.
And it cannot ever be closed.
I am keeping the trace logs I used to debug this issue in case anything similar to this happens again.
https://issues.apache.org/jira/browse/ARTEMIS-484
The File copy after the initial synchronization on large messages was broken.
On this commit we fix how the buffer is cleaned up before each read since
a previously unfinished body read would make the buffer dirty.
I'm keeping also lots of Traces I have added to debug this issue, so they will
be useful if anything like this happens again.
DelegatingSession class wraps ClientSessionImpl and attempts to close
session should it not be closed by the user. It does this by
implementing finalize. However, the order in which finalize runs can be
difficult to predict as compilers, and JIT compilers are able to
optimize early.
The current DelegatingSession was causing problems of finalize getting
called early (before consumers, producers were finished with the
session). This was causing tests to fail on the IBM JDK (which
optimizes early). The same happens on OpenJDK if the GC is forced.
Its now possible to also add the broker name to jmx tree avoiding clashes when multiple brokers are in a single vm. This is now the default but the old way can be used with some configuration
https://issues.apache.org/jira/browse/ARTEMIS-311
Ive renamed the current isSameHost method to isSameparams as thats what it checked and added a new method for isSameHost that checks the appropriate params for the connector. Ive changed ClientSessionFactoryImp to use this to correct the behaviour.
https://issues.apache.org/jira/browse/ARTEMIS-292
When server sends disconnect to the client, the ClientSession schedules
a close task on it's ordered executor. Once the close method starts
it's waits to check to see if all jobs in it's executor has completed.
To do this it adds a job to it's ordered executor, once it is run it
knows there is nothing more to do and thus is ready to close. However,
this causes a deadlock as both jobs are running in the ordered executor
and thus are both waiting on each other. The close eventually timesout
which is why we see the logs as reported in the JIRA.
This commit runs the close method in it's own ordered executor, thus
preventing the two jobs blocking each other.
The failback process needs to be deterministic rather than relying on various
incarnations of Thread.sleep() at crucial points. Important aspects of this
change include:
1) Make the initial replication synchronization process block at the very
last step and wait for a response from the replica to ensure the replica has
as the necessary data. This is a critical piece of knowledge during the
failback process because it allows the soon-to-become-backup server to know
for sure when it can shut itself down and allow the soon-to-become-live
server to take over. Also, introduce a new configuration element called
"initial-replication-sync-timeout" to conrol how long this blocking will occur.
2) Set the state of the server as 'LIVE' only after the server is fully
started. This is necessary because once the soon-to-be-backup server shuts
down it needs to know that the soon-to-be-live server has started fully before
it restarts itself as the new backup. If the soon-to-be-backup server restarts
before the soon-to-be-live is fully started then it won't actually become a
backup server but instead will become a live server which will break the
failback process.
3) Wait to receive the announcement of a backup server before failing-back.
Netty 4.x uses pooled buffers. These buffers can run out of memory when
transferring large amounts of data over connection. This was causing an
OutOfMemory exception to be thrown on the CoreBridge when tranferring
large messages. Netty provides a callback handler to notify listeners
when a Connection is writable. This patch adds the ability to register
connection writable listeners to the Netty connection and registers the
relevant callback from the Bridge to avoid writing when the buffers are
full.
https://issues.apache.org/jira/browse/ARTEMIS-217 fixing dead lock
This is using a separate lock for notifications, this way we won't hold a lock while communicating on netty which was the issue here.
Inbound sessions are always created from the same ActiveMQConnectionFactory
which means the load-balancing policy is applied to them in the expected
manner. However, outbound sessions are created from independent, unique
ActiveMQConnectionFactory instances which means that the load-balancing
doesn't follow the expected pattern.
This commit changes this behavior by caching each unique
ActiveMQConnectionFactory instance and using it for both inbound and outbound
sessions potentially. This ensures the sessions are load-balanced as
expected.
this is just calling Idea format on all the files using the new style
I am separating manual changes from automatic changes in case I have to repeat the manual changes again
https://issues.apache.org/jira/browse/ARTEMIS-142
I have previously exposed this exception as some errors were being hidden
Now that I have cleared those, It's best to remove this as some errors are now happening
https://issues.apache.org/jira/browse/ARTEMIS-136
From what I researched from implementers of XA TM if you throw ERR over communication errors the transaction manager will create
an heuristic transaction to be manually dealt with.
Other XA Implementations (such as Oracle JDBC) are return FAIL over communication failures during any XA operation.
"mvn install" now works without the lint, but a "mvn install javadoc:jar" still fails. Since that is what the release plugin uses, need to keep the lint there for now. Still lots of failures.
To reproduce this commit, apply a replace regex rule using:
search regex: /\*\*\n \* Licensed
replace: /\*\n \* Licensed
These files had to be changed manually:
artemis-selector/src/main/javacc/HyphenatedParser.jj
artemis-selector/src/main/javacc/StrictParser.jj
artemis-website/src/main/resources/styles/impact/css/pygmentize.css
artemis-website/src/main/resources/styles/impact/css/site.css
We had a few reported small issues on the codebase from the recent introduced google error prone.
This should eliminate any issues, and I am making sure these won't happen again
Lots of work on the test-suite in this commit including:
- Rename ServiceTestBase to ActiveMQTestBase
- Make AddressSettings fluent
- Remove unnecessary tearDown() implementations
- Use ActiveMQTestBase.create*Locator() instead of
ActiveMQClient.createServerLocator*(..)
- Use fluent ServerLocator methods
- Make sure all ActiveMQServers.newActiveMQServer invocations
are surrounded with addServer() where appropriate
- Create a few example tests to be references from hacking-guide
- Update hacking-guide with more info on writing tests
- Refactor config creation methods in ActiveMQTestBase
This has bothered me for awhile, but writing the hacking guide has
given me an opportunity to refactor some of our test-suite to be
simpler, more consistent, and easier to understand. This is
important if we want users to provide well-written tests. Our
test-suite is an important part of the code-base and it should be
easy to write good tests.
Basically I just consolidated CoreUnitTestCase, UnitTestCase, and
ServiceTestBase into a single class named ServiceTestBase. I also
simplified some of the configuration creation methods to reduce
duplicated code.
This commit is a simple mv of the files.. We required two commits to preserve history,
one to git mv, one for the actual changes...
otherwise history would be lost
Based on the Apache ActiveMQ community vote this project is being
renamed "Artemis."
jbertram
Martyn Taylor
Bernd Gutjahr
bayern39
Clebert Suconic
Ville Skyttä
kurobako
Andy Taylor
Howard Gao
Stuart Douglas
Ivo Studensky
Petter Nordlander
Julian Scheid
Otavio Rodolfo Piske
John D. Ament
Daniel Kulp
Thiago Kronig
Thiago Kronig
Jeff Mesnil
Andy Taylor