I am adding three attributes to Address-settings:
* page-limit-bytes: Number of bytes. We will convert this metric into max number of pages internally by dividing max-bytes / page-size. It will allow a max based on an estimate.
* page-limit-messages: Number of messages
* page-full-message-policy: fail or drop
We will now allow paging, until these max values and then fail or drop messages.
Once these values are retracted, the address will remain full until a period where cleanup is kicked in by paging. So these values may have a certain delay on being applied, but they should always be cleared once cleanup happened.
o.a.a.a.c.p.m.MQTTSubscriptionManager#removeSubscription() had a chunk
of code from 971f673c60 removed. That code
was added under the assumption that there should only ever be one
consumer per queue. That was true for MQTT 3.x, but it's not always true
for MQTT 5 due to shared subscriptions. However, the tests from that
commit all still pass even with it removed now (as well as all the other
MQTT tests) so I think it's safe.
If the client is using address prefixes to define the routing type along with
durable subscriptions then on re-attach the compairon to check if the subscription
address has changed needs to remove the prefix when comparing against the address
since the prefix isn't propagated when creating the address and will always fail
resulting in the subscription queue being deleted in error.
Adds some tests to validate that the destination prefixes if set and
are used properly by the client are honored over the default address
auto create routing type condiguration.
When an AMQP client subscribes to a new address (non-existing) with a receiver link, the
address is created with routing type ANYCAST regardles of the default address creation
configuration of the broker, and ignores even the broker wide default of MULTICAST.
I am adding an option sync=true or false on mirror. if sync, any client blocking operation will wait a roundtrip to the mirror
acting like a sync replica.
Over time org.apache.activemq.artemis.tests.integration.amqp has become
home to many multi-protocol JMS tests even though the package is really
for AMQP-specific tests. This commit splits those tests out into their
own package.
This is a preliminary step to clarify these tests before I add another
one for a different issue.
When the last non-durable subscriber on a JMS topic disconnects the
corresponding queue representing the subscription is deleted as
expected. However, the queue's address will also be deleted no matter
what, which is *not* expected.
Some LDAP servers (e.g. OpenLDAP) do not support the "persistent search"
feature and therefore the existing "listener" feature does not actually
fetch updates. This commit implements a "pull" feature controlled by a
configurable interval equivalent to what is implemented in the cached
LDAP authorization module from ActiveMQ "Classic."
A handful of tests started to fail after the original fix was committed.
This commit fixes those failures mainly by using a mock
`TransactionSynchronizationRegistry`.
I changed `o.a.a.a.r.ActiveMQRAManagedConnection#checkTransactionActive`
slightly because `getTransactionStatus` will never return `null` unlike
`getTransaction` would. The semantics should still be the same, though.
Allow setting id-cache-size to 0 from broker.xml and ensure the broker
handles this gracefully. Previously you could only set the cache size to
0 via broker properties or programmatically and it would throw an
ArrayIndexOutOfBoundsException when adding an item to the cache.
- From now on we will save snapshots of page-counters on the journal (basically for compatibility with previous verions).
And we will recount the records on startup.
- While the rebuild is being done the value from the previous snapshot is still available with current updates.
Attempt to standardize all Logger declaration to a singular variable name
which makes the code more consistent and make finding usages of loggers in
the code a bit easier.
Commit 5a42de5fa6 called my attention to
this test. It really needs to be refactored because:
- It belongs in the integration-tests module rather than the MQTT
protocol module.
- It is using a lot of non-standard components (e.g.
EmbeddedJMSResource, Awaitility, etc.).
- It is overly complicated (e.g. using its own MqttClientService).
This commit resolves all those problems. The new implementation is quite
a bit different but still equivalent. I reverted the original fix from
ARTEMIS-2476 and the test still fails.
Logger statements should use formatting syntax and let the normal framework checks take care of
checking if a logger is enabled instead of string concats and isXEnabled logger checks except
in cases there is known expense to the specifc logging message/arg preparation or passing.
Changes from myself and Robbie Gemmell.
Co-authored-by: Robbie Gemmell <robbie@apache.org>
I was debugging Compacting, looking for a possible issue here in these conditions.
even though I found nothing wrong with the code, I still want to keep the test as there's no such thing as enough testing.
In commit a9a85f98db I removed the code
which modified existing matches. However, I forgot that the matches read
from LDAP are often duplicated so instead of always adding a new match
this commit ensures that the *right* match is modified rather than a
potentially more generic wildcard match (which was the original
problem).
If an AMQP consumer tries to receive a message and the broker is unable
to convert the message from core to AMQP then the consumer is
disconnected and the offending message stays in the queue. When the
consumer reconnects the conversion error will happen again resulting in
a loop that can only be resolved through administrative action (e.g.
deleting the message manually or sending it to a dead letter address).
This commit fixes that problem by detecting the conversion problem and
sending the message to the queue's dead letter address. It also doesn't
disconnect the consumer.
This commit also changes the log messages associated with sending a
message to the dead letter address since this event can now occur
regardless of the delivery attempts.
The map used by LastValueQueue was inadvertently changed to a
non-thread-safe implementation in
4a4765c39c. This resulted in an occasional
ConcurrentModificationException from the hashCode implementation.
This commit restores the thread-safe map implementation and adds a test
which brute-forces a CME when using the non-thread-safe implementation.
Sometimes users want to perform custom client ID validation, and in the
case of an invalid client ID the proper reason code should be returned
in the CONNACK packet.
When the LegacyLDAPSecuritySettingPlugin has enableListener set to true
and a new permission is added it will try to modify the existing match
if one exists. This is problematic if there's a more generic wildcard
match than the specific one that's modified.
This commit fixes that problem so that instead of modifying the existing
match(es) it simply adds a new one. The plugin never should have tried
modifying the existing match in the first place as two identical matches
would be a configuration error.
- Fixing RoleInfo to provide informations on deleteAddress.
- Adding more coverage on test to check the number of permissions
returned.
Signed-off-by: Emmanuel Hugonnet <ehugonne@redhat.com>
By allowing to pass caller's classname directly to org.apache.activemq.artemis.utils.ActiveMQThreadFactory#defaultThreadFactory instead of calculating it from stack.
Due to the changes in 682f505e32 we now
send "Last Will & Testament" MQTT messages via ServerSession. This means
sending will fail if the disk is full. For MQTT this triggers a
connection failure which in turns triggers sending an LWT message. This
process will recurse infinitely until it results in a
java.lang.StackOverflowError.
This commit fixes that by tracking whether or not sending a LWT message
is already in progress.
When a message is sent to an anycast queue via FQQN on one node of a
cluster and then a consumer is created on that same anycast queue via
FQQN on another node in the cluster the message is not redistributed to
the node with the consumer.
This commit fixes this use-case primarily by including the FQQN info in
the notification messages sent to other nodes in the cluster.
Using direct routing skips authorization for "Last Will and Testament"
messages (a.k.a. "will" messages). This commit fixes that problem by
using the internal session that is established for normal message
production and consumption.
Messages without a last-value property sent to an LVQ are being pruned
rather than just passing through. Only messages with a non-null
last-value property should be subject to pruning.
Running HorizontalPagingTest with these variables would make the test to fail unless these changes are applied.
export TEST_HORIZONTAL_SERVER_START_TIMEOUT=300000
export TEST_HORIZONTAL_TIMEOUT_MINUTES=120
export TEST_HORIZONTAL_PROTOCOL_LIST=OPENWIRE
export TEST_HORIZONTAL_OPENWIRE_DESTINATIONS=200
export TEST_HORIZONTAL_OPENWIRE_MESSAGES=1000
export TEST_HORIZONTAL_OPENWIRE_COMMIT_INTERVAL=100
export TEST_HORIZONTAL_OPENWIRE_RECEIVE_COMMIT_INTERVAL=0
export TEST_HORIZONTAL_OPENWIRE_MESSAGE_SIZE=20000
export TEST_HORIZONTAL_OPENWIRE_PARALLEL_SENDS=10
The OpenWire JMS client shipped with ActiveMQ "Classic" uses the
client's hostname as part of the `JMSMessageID`. Consumers may use this
data to select messages sent from particular hosts. Although this is
brittle and not recommended it is nonetheless possible.
However, when messages arrive to ActiveMQ Artemis they are converted
to core messages, and the broker doesn't properly map the selector from
`JMSMessageID` to the corresponding property on the underlying core
message. This commit fixes that problem. Changes include:
- Mapping selector from JMSMessageID to the internal __HDR_MESSAGE_ID
- Relocating some constant values so that both the protocol and commons
module can use them
- Adding a test
Clebert Suconic
Justin Bertram
Timothy Bish
Domenico Francesco Bruscino
Ryan Highley
Andy Taylor
Robbie Gemmell
AntonRoskvist
Somdatta
Šmucr Jan
Gary Tully
Emmanuel Hugonnet
Rico Neubauer