Use new no copy variants for the delivery send and receive and make
use of the ReadableBuffer type that is now used to convery tranfer
payloads without a copy. Also set max outgoing frame size to match
the configured maxFrameSize for the AMQP protocol head to avoid the
case where an overly large frame can be written instead of chunking
a large message.
OpenWireMessageConverter::toAMQMessage on bytes messages is lazy
allocating a write buffer with a default size of 1024 even when
it won't be used to write anything.
It avoid an useless allocation by reducing it to new byte[0].
messageAcknowledged plugin callback methods
Knowing the consumer that expired or acked a message (if available) is
useful and right now a message reference only contains a consumer id
which by itself is not unique so the actual consumer needs to be passed
Make sure the correct buffer is used when decoding the stored Core
message that originated from the conversion of an AMQP message sent and
annotated as a JMS ObjectMessage which trips the large message boundary.
It includes:
- Message References: no longer uses boxed primitives and AtomicInteger
- Node: intrusive nodes no longer need a reference field holding itself
- RefCountMessage: no longer uses AtomicInteger, but AtomicIntegerFieldUpdater
Alternate patch that doesn't copy the message bytes unless doing a
redelivery or skipping delivery annotations in the original version of
the message. Proton-J will copy the bytes provided to the Sender's send
method so a copy isn't necessary on most common sends.
connection
To prevent a socket from hanging open by a bad client the broker should
make sure to stop the transport if a connection attempt fails by an
OpenWire client
Check for AMQSession being null before handling various TX state checks
in order to ensure the correct errors are thrown and TX rollback is
handled properly.
OpenWireFormat instances are shared between OpenWire connections/sessions/consumers, preventing the clients to scale due to the synchronized marshal/unmarshal on it.
It includes:
- direct transport buffer pooling
- groupId SimpleString pooling
- clientId SimpleString pooling
- reduced ActiveMQDestination[] and AtomicLong allocations on AMQSession:send
- reduced ActiveMQDestination allocations
- refactored shouldBlockProducer path of AMQPSession::send to reduce method size
- exclusive OpenWireFormat per session and connection (in/out) to avoid contention
- refactored trace log to favour inlining
- changed lastSent volatile set into lazy set to avoid full barrier cost on x86
- stateless OpenWireMessageConverter
- send's lock removal thanks to thread-safe NettyConnection
This is good when you are a customer and an artemis engineer (e.g. me) asks your journal print-data but you can't do it because that would expose your user's data. If you do artemis data print --safe, that will only expose the journal structure without exposing user's data and eliminate any liability between the engineer and users.
Adding new metrics for tracking message counts and sizes on a Queue.
This includes tracking metrics for pending, delivering and scheduled
messages. The paging store also tracks message size now.
Support exlusive consumer
Allow default address level settings for exclusive consumer
Allow queue level setting in broker.xml
Add the ability to set queue settings via Core JMS using address. Similar to ActiveMQ 5.X
Allow for Core JMS client to define exclusive consumer using address parameters
Add tests
HornetQClientProtocolManager is used to connect HornteQ servers.
During reconnect, it sends a CheckFailoverMessage packet to the
server as part of reconnection. This packet is not supported by
HornetQ server (existing release), so it will break the backward
compatibility.
Also fixed a failover issue where a hornetq NettyConnector's
ConnectorFactory is serialized to the clients who cannot
instantiate it because class not found exception.
Flag needs to be set when auto creating an address so that the address
can be removed later if auto delete is configured when creating a
subscription with MQTT
* Move byte util code into ByteUtil
* Re-use the new equals method in SimpleString
* Apply same pools/interners to client decode
* Create String to SimpleString pools/interners for property access via String keys (producer and consumer benefits)
* Lazy init the pools on withing the get methods of CoreMessageObjectPools to get the specific pool, to avoid having this scattered every where.
* reduce SimpleString creation in conversion to/from core message methods with JMS wrapper.
* reduce SimpleString creation in conversion to/from Core in OpenWire, AMQP, MQTT.
If the Stomp consumer was closed at or near the same time a message was
dispatched then an NPE might result. Throwing an exception is a
relatively expensive operation in the JVM because of the stacktrace
information that needs to be generated, so in cases where it is known
that a null value could be returned one should check and handle it
appropriately.
When openwire client uses compressed option to send messages
(jms.useCompression=true) openwire client failed to receive them.
The reason is in OpenwireMessageConverter.toAMQMessage():
1. message.setContent() should be called after setting properties
(It will cause the compressed content to decompressed before delivering to clients)
2. message.onSend() should not be called here (it should be used
by producers. If used here it changes the internal flags of the
message and cause receive to fail).
Apply fix so that when using JNDI via tomcat resource it works.
Replace original extract of JNDIStorable taken from Qpid, and use ActiveMQ5's as fits better to address this issue. (which primary use case is users migrating from 5.x)
Refactored ActiveMQConnectionFactory to externalise and turn into reference by StringRefAddr's instead of custom RefAddr which isnt standard.
Refactored ActiveMQDestinations similar
Refactored ActiveMQDestination to remove redundent and duplicated name field and ensured getters still behave the same
Unsubscribe topic in clustered environment left open references to the core consumer. This patch properly closes the consumer which results in correct removal of the consumer reference on a remote queue.
Use Map<String, Object> to access the ApplicationProperties section
which is the spec defined type for that section. This will prevent
breakage should proton-j be updated to reflect that in the definition of
that class.
This will cache the last query, optimizing most of the cases
This won't optimize the case where you are sending producers with different address,
but this is not the one I'm after now.
Openwire clients create consumers to advisory topics to receive
notifications. As a result there are internal queues created
on advisory topics. Those consumer shouldn't be exposed via
management APIs which are used by the Console
To fix that the broker doesn't register any queues from
advisory addresses.
Also refactors a code to remove Openwire specific contants
from AddressInfo class.
I'm doing an overal improvement on large message support for AMQP
However this commit is just about a Bug on the converter.
It will be moot after all the changes I'm making, but I would rather keep this separate
as a way to cherry-pick on previous versions eventually.
Extend test cases in MessageTypesTest to cover Core to AMQP combinations for all JMSTypeTests
Fix ServerJMSBytesMessage to correctly return bodyLength
Remove unused/dead code
Allows for JMS selectors on JMSCorrelationID as well as JMSXGroupID
and JMSXUserID along with some fixes to avoid an NPE case and fixes
to the conversion of AMQP MessageID and CorrelationID values when
doing cross protocol mappings. Adds new tests to cover more cases
of using the JMS selector with Qpid JMS and the AMQP test client.
add the adaptTransportConfiguration() method to the
ClientProtocolManagerFactory so that transport configurations used by
the ClientProtocolManager have an opportunity to adapt their transport
configuration.
This allows the HornetQClientProtocolManagerFactory to adapt the
transport configuration received by remote HornetQ broker to replace the
HornetQ-based NettyConnectorFactory by the Artemis-based one.
JIRA: https://issues.apache.org/jira/browse/ARTEMIS-1431
If message senders and receivers uses different
wireformat.tightEncodingEnabled options, broker will get marshalling
problem. This is because when openwire messages are converted to
core messages, and later these core messages converted to openwire
messages, the broker uses a mashaller that comes with the connection
used to carry the messages.
For example, if a producer sents a message using option "wireformat
.tightEncodingEnabled=false" and a receiver tries to receive it
using 'true' for the same option, it'll never get it because the
broker will fail to use a "tight encoding" marshaller to
decode a 'loose encoded' message.
To fix the problem, we always use 'tight encoding' for internal
message converters.
Remove some redundant code in the processing of the OpenWire Destination
name, both in the topic handler and in the method in general the
destination name only needs to be converted once and only one
SimpleString instance needs to be created from that which will then feed
all the places that either the String form or the SimpleString form of
the result is needed.
By default, every openwire connection will create a queue
under the multicast address ActiveMQ.Advisory.TempQueue.
If a openwire client is create temporary queues these queues
will fill up with messages for as long as the associated
openwire connection is alive. It appears these messages
do not get consumed from the queues.
The reason behind is that advisory messages don't require
acknowledgement so the messages stay at the queue.
Remove the unused transaction remove method as the getTransaction method
provides the remove operation and the remove method was doing an invalud
remove of wrong type from the transactions collection.
Added test case for cross protocol on JMSDeliveryMode proving issue, and asserting fix
Added fix to AmqpCoreConverter to ensure durability (JMSDeliveryMode) is retained.
Similar issue spotted with JMSPriority as with JMSDeliveyMode, fixing at the same time.
Added extra test case for jmspriority
Added fix for jmspriority
Avoid null checking each disposition before then checking the type, also
account for not knowing the type. Rearrange the handling code to
prioritize the most common case which is "Accepted"
Only reencode the Header on a Message when the redelivering the Message
to avoid overhead and unneeded modification to the original encoding of
the Header.
Fix for MQTT in connect due to deprecated methods bug causing NPE, call new methods and null check ourselves.
Also raised https://github.com/netty/netty/issues/7076 upstream but i guess we will keep this, as the old methods are deprecated anyhow.
delegate to the jdk saslServer. Allow acceptor configuration of supported mechanismis; saslMechanisms=<a,b>
and allow login config scope for krb5 to be configured via saslLoginConfigScope=x
On completion of drain the response is not flushed and the
client can wait a few seconds before another broker task
flushes the work. Flush the connection after updating the
linked as being drained. Also perform the work with the
connection lock held to prevent conccurent update of proton
state.
Add krb5sslloginmodule that will populate userPrincipal that can be mapped to roles independently
Generalised callback handlers to take a connection and pull certs or peerprincipal based on
callback. This bubbled up into api change in securitystore and security manager
Use AcitveMQDestination for subscription naming, fixing and aligning queue naming in the process.
The change is behind a configuration toggle so to avoid causing any breaking changes for uses not expecting.
Adds headers AMQ_SCHEDULED_DELAY and AMQ_SCHEDULED_TIME to STOMP
protocol handling to allow for delayed and scheduled time of a
message. The AMQ_SCHEDULED_DELAY brings forward the same option
from the 5.x broker and the AMQ_SCHEDULED_TIME option adds a fixed
time of delivery alternative to match that of AMQP and others.
Add test case, to prove the issue, and then obviously ensure it works, post fix.
Apply changes in logic of createQueueName to handle global better and fix the behaviour.
Create queues so names are same as behaviour with core client.
this will fix a few multiple protocol tests on ConsumerTests.
And a few other AMQP tests dealing with conversions.
You would get a classCastException without this commit.
If an error escapes into the event processing layer we close the
connection with an error condition to avoid the client becoming stuck on
waiting for a response from the broker and the broker side being in an
unknown state.
Multiplication operations where the operands have type `int` but the
result is cast to `long` may lead to overflow.
Fixes two instances of this problem, by ensuring the operands are cast
to `long` during multiplication.
This resolves the "Result of integer multiplication cast to long"
alerts at https://lgtm.com/projects/g/apache/activemq-artemis/alerts.
When creating some AMQP resources (senders, receivers, etc) the broker
can return an error of 'failed' instead of the security error that is
expected in these cases. In the case of a receiver being created and
a security error happening the broker fails to send back a response
causing the client to hang waiting for an attach response.
Broker should support full qualified queue names (FQQN)
as well as bare queue names. This means when clients access
to a queue they have two equivalent ways to do so. One way
is by queue names and the other is by FQQN (i.e. address::qname)
names. Currently only receiving is supported.
On link attach we currently default out SenderSettleMode to MIXED which
while legal doesn't truly reflect what the client asked for. We instead
now update the link to reflect the mode requested by the client
Also add some tests to ensure that we always return the
ReceiverSettleMode as FIRST since we don't support SECOND.
Broker should support full qualified queue names (FQQN)
as well as bare queue names. This means when clients access
to a queue they have two equivalent ways to do so. One way
is by queue names and the other is by FQQN (i.e. address::qname)
names. Currently only receiving is supported.
Resuse a single small buffer for all txn commands (declare / dischare) to
avoid creating lots of small arrays and ByteBuffer wrappers for txn operations.
Fix the getUserID and getTimestamp methods in AMQPMessage to read and
return the correct values. Adds some tests to cover these cases and
cleans up some others.
Ensure that the header value for priority is read and returned in a form
that is scaled such that it won't cause an IndexOutOfBoundsException
from the QueueImpl priority array. Adds some additional testing for
message priority support.
When populate-validated-user = true AMQP messages can cause exceptions.
This feature isn't particularly applicable to AMQP so this commit
eliminates the exception and leaves the AMQP messages untouched
even if populate-validated-user = true. In other words,
populate-validated-user + AMQP is not supported.
When I added flow control, some tests that were using reflection started to fail.
Also as a precaution I'm using <= on the flow control low credit check
When a message is sent to the broker with a TransactionState indicating
that the message should be included in a transaction the disposition from
the broker indicating acceptance of the message should be done using a
TransactionState value that contained the TX ID and the Accepted
disposition.
Benjamin Graf
Timothy Bish
Clebert Suconic
Justin Bertram
Francesco Nigro
Christopher L. Shannon (cshannon)
Stanislav Knot
Ulf Lilleengen
gtully
Dejan Bosanac
Michael André Pearce
Howard Gao
jostbg
raul.valdoleiros
Todd Baert
Andy Taylor
Pat Fox
saurabhrai
Martyn Taylor
Robert Godfrey
Jens Reimann
Jiri Danek
Jeff Mesnil
Robbie Gemmell
Otavio R. Piske
Odyldzhon Toshbekov
Helge Waastad
Ingo Weiss
Aditya Sharad