This commit contains the following changes:
- eliminate used, undeclared dependencies
- eliminate unused, declared dependencies
- fix scope for test dependencies
- eliminate org.hamcrest completely as its use involved deprecated code
as well as dependencies from multiple versions
When resource audit logging is enabled STOMP is completely inoperable
due to an NPE during the protocol handshake. Unfortunately the failure
is completely silent. There are no logs to indicate a problem.
This commit fixes this problem via the following changes:
- Mitigate the original NPE via a check for null
- Move the logic necessary to set the "protocol connection" on the
"transport connection" to a class shared by all implementations.
- Add exception handling to log failures like this in the future.
- Add tests to ensure the audit logging is correct.
Continually read from the compressed byte[] into
the decompressed object
Add test to validate large (>1024 bytes) compressed data can be
deserialized properly
During redistribution, we should not copy all message annotations.
In particular we should not copy any of the x-opt-ORIG annotations used on DLQ and other copies.
this was broken after f632e8104b (ARTEMIS-3833 Preserve JMSCorrelationID of distributed AMQP large messages)
The change preserved too much, and as a result of that AmqpLargeMessageRedistributionTest::testSendMessageToBroker0GetFromBroker2 is intermittently failing.
There is no test in this commit as this is fixing AmqpLargeMessageRedistributionTest
When sending, for example, to a predefined anycast address and queue
from a multicast (JMS topic) producer, the routed count on the address
is incremented, but the message count on the matching queue is not. No
indication is given at the client end that the messages failed to get
routed - the messages are just silently dropped.
Fixing this problem requires a slight semantic change. The broker is now
more strict in what it allows specifically with regards to
auto-creation. If, for example, a JMS application attempts to send a
message to a topic and the corresponding multicast address doesn't exist
already or the broker cannot automatically create it or update it then
sending the message will fail.
Also, part of this commit moves a chunk of auto-create logic into
ServerSession and adds an enum for auto-create results. Aside from
helping fix this specific issue this can serve as a foundation for
de-duplicating the auto-create logic spread across many of the protocol
implementations.
- activemq.notifications are being transferred to the target node, unless an ignore is setup
- topics are being duplicated after redistribution
- topics sends are being duplicated when a 2 node cluster mirrors to another 2 node cluster, and both nodes are mirrored.
- interrupted message breaking reference counting
After the server writing to the client is interrupted in AMQP, the reference counting was broken what would require the server restarted
in order to cleanup the files of any interrupted sends.
- Removed consumer during large message delivery damaging large messages
If the consumer failed to deliver messages for any reason, the message on the queue would be duplicated. what would wipe out the body of the message
and other journal errors would happen because of this.
extra debug capabilities added into RefCountMessage as part of ARTEMIS-4206 in order to identify these issues
This fix is scanning journal and paging for existing large messages. We will remove any large messages that do not have a corresponding record in journals or paging.
there are two leaks here:
* QueueImpl::delivery might create a new iterator if a delivery happens right after a consumer was removed, and that iterator might belog to a consumer that was already closed
as a result of that, the iterator may leak messages and hold references until a reboot is done. I have seen scenarios where messages would not be dleivered because of this.
* ProtonTransaction holding references: the last transaction might hold messages in the memory longer than expected. In tests I have performed the messages were accumulating in memory. and I cleared it here.
o.a.a.a.c.p.o.a.AMQConsumer#init will *always* try to create a core
queue when creating a consumer for a JMS queue. However, this is
already done in o.a.a.a.c.p.o.a.AMQSession#createConsumer.
The issue identified with AMQP was under Transaction usage, and while opening and closing sessions.
It seems the leak would be released once the connection is closed.
We added a new testsuite under ./tests/leak-tests To fix and validate these issues
For pipelined open cases the events processing should ignore additional begin
and attach events if the open event handler closes the connection to avoid the
processing throwing additional exceptions and replacing the error condition in
the connection with an unrelated error about NPE from the additional events.
o.a.a.a.c.p.m.MQTTSubscriptionManager#removeSubscription() had a chunk
of code from 971f673c60 removed. That code
was added under the assumption that there should only ever be one
consumer per queue. That was true for MQTT 3.x, but it's not always true
for MQTT 5 due to shared subscriptions. However, the tests from that
commit all still pass even with it removed now (as well as all the other
MQTT tests) so I think it's safe.
If the client is using address prefixes to define the routing type along with
durable subscriptions then on re-attach the compairon to check if the subscription
address has changed needs to remove the prefix when comparing against the address
since the prefix isn't propagated when creating the address and will always fail
resulting in the subscription queue being deleted in error.
When an AMQP client subscribes to a new address (non-existing) with a receiver link, the
address is created with routing type ANYCAST regardles of the default address creation
configuration of the broker, and ignores even the broker wide default of MULTICAST.
I am adding an option sync=true or false on mirror. if sync, any client blocking operation will wait a roundtrip to the mirror
acting like a sync replica.
Attempt to standardize all Logger declaration to a singular variable name
which makes the code more consistent and make finding usages of loggers in
the code a bit easier.
Commit 5a42de5fa6 called my attention to
this test. It really needs to be refactored because:
- It belongs in the integration-tests module rather than the MQTT
protocol module.
- It is using a lot of non-standard components (e.g.
EmbeddedJMSResource, Awaitility, etc.).
- It is overly complicated (e.g. using its own MqttClientService).
This commit resolves all those problems. The new implementation is quite
a bit different but still equivalent. I reverted the original fix from
ARTEMIS-2476 and the test still fails.
Logger statements should use formatting syntax and let the normal framework checks take care of
checking if a logger is enabled instead of string concats and isXEnabled logger checks except
in cases there is known expense to the specifc logging message/arg preparation or passing.
Changes from myself and Robbie Gemmell.
Co-authored-by: Robbie Gemmell <robbie@apache.org>
If an AMQP consumer tries to receive a message and the broker is unable
to convert the message from core to AMQP then the consumer is
disconnected and the offending message stays in the queue. When the
consumer reconnects the conversion error will happen again resulting in
a loop that can only be resolved through administrative action (e.g.
deleting the message manually or sending it to a dead letter address).
This commit fixes that problem by detecting the conversion problem and
sending the message to the queue's dead letter address. It also doesn't
disconnect the consumer.
This commit also changes the log messages associated with sending a
message to the dead letter address since this event can now occur
regardless of the delivery attempts.
Sometimes users want to perform custom client ID validation, and in the
case of an invalid client ID the proper reason code should be returned
in the CONNACK packet.
Due to the changes in 682f505e32 we now
send "Last Will & Testament" MQTT messages via ServerSession. This means
sending will fail if the disk is full. For MQTT this triggers a
connection failure which in turns triggers sending an LWT message. This
process will recurse infinitely until it results in a
java.lang.StackOverflowError.
This commit fixes that by tracking whether or not sending a LWT message
is already in progress.
org.apache.activemq.artemis.spi.core.protocol.RemotingConnection has a
number of implementations most notably an abstract version which
provides many methods shared among the implementations. The sharing
could be improved to eliminate duplicate code.
This commit eliminates more than 700 lines of unnecessary code.
There should be no semantic changes.
Using direct routing skips authorization for "Last Will and Testament"
messages (a.k.a. "will" messages). This commit fixes that problem by
using the internal session that is established for normal message
production and consumption.
The OpenWire JMS client shipped with ActiveMQ "Classic" uses the
client's hostname as part of the `JMSMessageID`. Consumers may use this
data to select messages sent from particular hosts. Although this is
brittle and not recommended it is nonetheless possible.
However, when messages arrive to ActiveMQ Artemis they are converted
to core messages, and the broker doesn't properly map the selector from
`JMSMessageID` to the corresponding property on the underlying core
message. This commit fixes that problem. Changes include:
- Mapping selector from JMSMessageID to the internal __HDR_MESSAGE_ID
- Relocating some constant values so that both the protocol and commons
module can use them
- Adding a test
MQTT 3.1 and 3.1.1 clients using a clean session should have a
*non-durable* subscription queue. If the broker restarts the queue
should be removed. This is due to [MQTT-3.1.2-6] which states that the
session (and any state) must last only as long as the network
connection.
It would be useful for security manager implementations to be able to
alter the client ID of MQTT connections.
This commit supports this functionality by moving the code which handles
the client ID *ahead* of the authentication code. There it sets the
client ID on the connection and thereafter any component (e.g. security
managers) which needs to inspect or modify it can do so on the
connection.
This commit also refactors the MQTT connection class to extend the
abstract connection class. This greatly simplifies the MQTT connection
class and will make it easier to maintain in the future.
Allow replication only certain addresses with mirror controller.
The configuration is similar to cluster address configuration.
Co-authored-by: Robbie Gemmell <robbie@apache.org>
The MQTT 5 (and 3.1.1) specification states:
Until it has received the corresponding PUBREL packet, the receiver
MUST acknowledge any subsequent PUBLISH packet with the same Packet
Identifier by sending a PUBREC. It MUST NOT cause duplicate messages to
be delivered to any onward recipients in this case [MQTT-4.3.3-10].
The broker prevents a duplicate message, but it doesn't respond with a
PUBREC. This commit fixes that.
Removing the connection ID property from the actual *message* breaks the
nolocal functionality. Removing the property isn't necessary in the
first place so this commit reomves that code.
Older versions of Openwire clients wil be affected by AMQ-6431.
As a result of the issue if the ID of the message>Integer.MAX_VALUE
a consumer configured with Failover and doing duplicate detection on the client
will not be able to process duplicate detection accordingly and miss messages.
This bug is causing tests in o.a.a.a.t.i.m.s.c.ConnectTestsWithSecurity
to fail.
This commit fixes the problem by setting the session's version earlier
in the logic handling the CONNECT packet so that the proper CONNACK
return code can be supplied to the remote client in case of
authentication failure.
The commit includes the following changes:
- Don't drop the connection on subscribe or publish authorization
failures for 3.1 clients.
- Don't drop the connection on subscribe authorization failures for
3.1.1 clients.
- Add configuration parameter to control behavior on publish
authorization failures for 3.1.1 clients (either disconnect or not).
Avoid storing the following values as byte[] for OpenWire:
- Marshalled properties. We already store the unmarshalled properties
so this is altogether redundant.
- Producer ID.
- Message ID.
- Various destination values.
Also, eliminate the "original transaction ID" conversion code as it's
never actually set from the incoming message.
MQTT 5 is an OASIS standard which debuted in March 2019. It boasts
numerous improvments over its predecessor (i.e. MQTT 3.1.1) which will
benefit users. These improvements are summarized in the specification
at:
https://docs.oasis-open.org/mqtt/mqtt/v5.0/os/mqtt-v5.0-os.html#_Toc3901293
The specification describes all the behavior necessary for a client or
server to conform. The spec is highlighted with special "normative"
conformance statements which distill the descriptions into concise
terms. The specification provides a helpful summary of all these
statements. See:
https://docs.oasis-open.org/mqtt/mqtt/v5.0/os/mqtt-v5.0-os.html#_Toc3901292
This commit implements all of the mandatory elements from the
specification and provides tests which are identified using the
corresponding normative conformance statement. All normative
conformance statements either have an explicit test or are noted in
comments with an explanation of why an explicit test doesn't exist. See
org.apache.activemq.artemis.tests.integration.mqtt5 for all those
details.
This commit also includes documentation about how to configure
everything related to the new MQTT 5 features.
Alexey Markevich
Robbie Gemmell
Justin Bertram
Clebert Suconic
Artyom Tarasenko
Peter Brady
Gary Tully
Timothy Bish
Andy Taylor
AntonRoskvist
Domenico Francesco Bruscino
iliya
Erwin Dondorp
Marco Roehrs
nbrendah