Any checkProperties();<usage of this.properties> pattern has been
replaced by an atomic checkProperties().<usage of returned properties>
to help both performance and consistency.
The cleanup is now performed into CoreTypedProperties both
for performance reasons (avoid lock/unlock many times)
and consistency, given that the operation is now atomic.
Add consumer priority support
Includes refactor of consumer iterating in QueueImpl to its own logical class, to be able to implement.
Add OpenWire JMS Test - taken from ActiveMQ5
Add Core JMS Test
Add AMQP Test
Add Docs
MULTICAST messages forwarded by a core bridge will not be routed to any
ANYCAST queues and vice-versa. Diverts have the ability to configure how
routing-type is treated. Core bridges now support this same kind of
functionality. By default the bridge does not alter the routing-type of
forwarded messages to maintain compatibility with existing behavior.
These improvements were also part of this task:
- Routing is now cached as much as possible.
- A new Runnable is avoided for each individual message,
since we use the Netty executor to perform delivery
https://issues.apache.org/jira/browse/ARTEMIS-2205
This helped decreasing a lot of pressure on GC by not creating
as many runnables for each write.
Besides this helps fixing some of the issues I would have had on refactoring AMQP
over flushing writes and other asynchronous issues.
Refactor ServerJMSMessage so it correctly transposes all JMSX headers.
Push common JMSX mappings for JMS to Message Interface mappings into MessageUtil to avoid duplication in ActiveMQMessage and ServerJMSMessage
Add test cases
Add GroupSequence to Message Interface
Implement Support closing/reset group in queue impl
Update Documentation (copy from activemq5)
Change/Fix OpenWireMessageConverter to use default of 0 if not set, for OpenWire as per documentation http://activemq.apache.org/activemq-message-properties.html
A synchronization block was missed during the AMQP refactoring.
This could impact use-cases involving diverts, cluster bridges, and
multiple concurrent consumers.
Implement custom LVQ Key and Non-Destructive in broker - protocol agnostic
Make feature configurable via broker.xml, core apis and activemqservercontrol
Add last-value-key test cases
Add non-destructive with lvq test cases
Add non-destructive with expiry-delay test cases
Update documents
Add new methods to support create, update with new attributes
Refactor to pass through queue-attributes in client side methods to reduce further method changes for adding new attributes in future and avoid methods with endless parameters. (note: in future this should prob be done server side too)
Update existing test cases and fake impls for new methods/attributes
Given that NettyConnector::createConnection isn't happening on the
channel's event loop, it could race with a channel close event, that
would clean the whole channel pipeline, leading to a NPE while
trying to use a configured channel handler of the pipeline.
Extend test case to reproduce problem of client created queues being incorrectly removed on simple reload of config.
Add a flag/field to the queues created by configuration/broker.xml so we can correctly filter only queues created/managed by config.
Update listConfiguredQueues to use the new queue flag
Add Tests
Add implementation inline with other queue updatable settings.
Enhance tests to ensure queue is not destroyed during config change and messages in queue already are preserved
First, QueueQuery should use address name for address settings
The name used for looking up address settings for a queue now uses the
address name if there is a local queue binding
Second, make sure sent credits to the server is the correct value
In some cases users who migrate from 1.x to 2.x may still want to keep
the legacy prefixes for their JMS destinations (i.e. "jms.queue.",
"jms.topic.", etc.). This commit adds a boolean on our ConnectionFactory
implementation so that it will use the old prefixes when invoking the
queue/topic creation methods on the Session implementation.
Fix checkstyle
Avoid duplicated logic
Ability to filter and group
Instantiate SimpleString property key once
Get property value via getObjectProprty to ensure all special mapped properties such as in AMQPMessage would return
Avoid a custom string to represent null, instead rely on Java's representation "null" by using Objects.toString to get the string value of the property value used to group by.
This commit adds support for tracking metrics for bridges for both
normal bridges and bridges that are part of a cluster. The two
statistics added in this commit are messages pending acknowledgement
and messages acknowledged but more can be added later.
In a live-backup scenario, if the live is restarted and shutdown too soon,
the client have a chance to fail on failover because it's internal topology
is inconsistent with the final status. The client keeps connecting to live
already shut down, never trying to connect to the backup.
It's a porting from HORNETQ-1572.
- Split protocols into individual chapters
- Reorganize summary to flow more logically
- Fill in missing parameters in configuration index
- Normalize spaces for ordered and unordered lists
- Re-wrap lots of text for readability
- Fix incorrect XML snippets
- Normalize table formatting
- Improve internal links with anchors
- Update content to reflect new address model
- Resized architecture images to avoid excessive white-space
- Update some JavaDoc
- Update some schema elements
- Disambiguate AIO & ASYNCIO where necessary
- Use URIs instead of Objects in code examples
Quorum voting is used by both the live and the backup to decide what to do if a replication connection is disconnected.
Basically, the server will request each live server in the cluster to vote as to whether it thinks the server it is replicating to or from is still alive.
You can also configure the time for which the quorum manager will wait for the quorum vote response.
Currently, the value is hardcoded as 30 sec. We should change this 30-second wait to be configurable.
Added an example to demonstrate how to configure and use openssl
Moved/Added netty-tcnative dependency to artemis-distribution
Changed artemis-jms-client-all pom to exclude io.netty from relocation
so that the native openssl can be loaded
1. Add tests case to verify issue and fix, tests also tests for same behavior using CORE, OPENWIRE and AMQP JMS Clients.
2. Update Core Client to check for queue before creating, sharedQueue as per createQueue logic.
3. Update ServerSessionPacketHandler to handle packets from old clients to perform to implement the same fix server side for older clients.
4. Correct AMQP protocol so correct error code is returned on security exception so that amqp jms can correctly throw JMSsecurityException
5. Correct AMQP protocol to check for queue exists before create
6. Correct OpenWire protocol to check for address exists before create
It avoid using the system clock to perform the locks logic
by using the DBMS time.
It contains several improvements on the JDBC error handling
and an improved observability thanks to debug logs.
Expose method to return current mappings of groups to consumers
Expose methods to reset (remove) specific group mapping from groupID to Consumer
Expose methods to reset (remove) all group mappings
When finding out if a connector belong to a target node it compares
the whole parameter map which is not necessary. Also in understanding
the connector the best place is to delegate it to the corresponding
remoting connection who understands it. (e.g. INVMConnection knows
whether the connector belongs to a target node by checking it's
serverID only. The netty ones only need to match host and port, and
understanding that localhost and 127.0.0.1 are same thing).
It includes:
- Message References: no longer uses boxed primitives and AtomicInteger
- Node: intrusive nodes no longer need a reference field holding itself
- RefCountMessage: no longer uses AtomicInteger, but AtomicIntegerFieldUpdater
It allows a user to customize the max allowed distance between system and DB time,
improving HA reliability by shutting down the broker when the misalignment
exceeds configured limit.
The JDBC Lock Acquisition Timeout is no longer exposed to any user configuration and defaulted to infinite to match the behaviour of the journal (file-based) one.
- LargeServerMessageImpl.finalize is eventually causing deadlocks
- CoreMessage needs to check properties before decoding
- PagingTest tweaks
- ServerLocatorImpl can deadlock eventually, avoiding a lock and using actors
- ActiveMQServerImpl.finalize is also evil and can cause deadlocks on the testsuite
- MqttClusterRemoteSubscribeTest needs to setup the Address now on the setup
This is good when you are a customer and an artemis engineer (e.g. me) asks your journal print-data but you can't do it because that would expose your user's data. If you do artemis data print --safe, that will only expose the journal structure without exposing user's data and eliminate any liability between the engineer and users.
Adding new metrics for tracking message counts and sizes on a Queue.
This includes tracking metrics for pending, delivering and scheduled
messages. The paging store also tracks message size now.
Support exlusive consumer
Allow default address level settings for exclusive consumer
Allow queue level setting in broker.xml
Add the ability to set queue settings via Core JMS using address. Similar to ActiveMQ 5.X
Allow for Core JMS client to define exclusive consumer using address parameters
Add tests
HornetQClientProtocolManager is used to connect HornteQ servers.
During reconnect, it sends a CheckFailoverMessage packet to the
server as part of reconnection. This packet is not supported by
HornetQ server (existing release), so it will break the backward
compatibility.
Also fixed a failover issue where a hornetq NettyConnector's
ConnectorFactory is serialized to the clients who cannot
instantiate it because class not found exception.
We provide a feature to mask passwords in the configuration files.
However, passwords in the bootstrap.xml (when the console is
secured with HTTPS) cannot be masked. This enhancement has
been opened to allow passwords in the bootstrap.xml to be masked
using the built-in masking feature provided by the broker.
Also the LDAPLoginModule configuration (in login.config) has a
connection password attribute that also needs this mask support.
In addition the ENC() syntax is supported for password masking
to replace the old 'mask-password' flag.
Change all use from Set<RoutingType> to EnumSet<RoutingType>
Deprecating any old exposed interfaces but keeping for back compatibility.
Address info to avoid iterator on getRoutingType hotpath, like wise can be avoided where single RoutingType is passed in.
* Move byte util code into ByteUtil
* Re-use the new equals method in SimpleString
* Apply same pools/interners to client decode
* Create String to SimpleString pools/interners for property access via String keys (producer and consumer benefits)
* Lazy init the pools on withing the get methods of CoreMessageObjectPools to get the specific pool, to avoid having this scattered every where.
* reduce SimpleString creation in conversion to/from core message methods with JMS wrapper.
* reduce SimpleString creation in conversion to/from Core in OpenWire, AMQP, MQTT.
Expose User associated with creating Queue on JMX QueueControl (as attribute)
Allow setting of the user to associate with creating the queue when configured in broker.xml (before only if created over wire is it possible to set the user)
Revert "ARTEMIS-1545 Adding HornetQ 2.4.7 on the mesh to validate send-acks"
I'm reverting this as the testsuite is broken..
We will send it back once worked out.
This reverts commit 8f5b7a1e73.
This reverts commit 9b982b3e30.
add connection ID to the trace logging output
dealing with reading/writing packets. This helps correlate
the packets read/written to an individual tcp connection
Openwire clients create consumers to advisory topics to receive
notifications. As a result there are internal queues created
on advisory topics. Those consumer shouldn't be exposed via
management APIs which are used by the Console
To fix that the broker doesn't register any queues from
advisory addresses.
Also refactors a code to remove Openwire specific contants
from AddressInfo class.
The temporary deadlock is avoided by removing 'synchronized' from
ClientSessionImpl::getCredits method. As the method uses only
a producerCreditManger, only this object is guarded against
the parallel access.
When the execution of code jumps out of the while cycle,
it should check whether the blocking-call-timeout expired or not.
If no, ActiveMQUnBlockedException should be thrown
instead of ActiveMQConnectionTimedOutException.
The changes to remove netty-all removes the classifiers that add the
dependency to the netty transport that includes the compiled native
library wrapper. Add those classifiers back in.
Added a new trustAll flag which will support trusting any client
keystore when doing testing against a broker. This setting should not
be used in production and is strictly for testing.
In a cluster if a node is shut down (or crashed) when a
message is being routed to a remote binding, a internal
property may be added to the message and persisted. The
name of the property is like _AMQ_ROUTE_TOsf.my-cluster*.
if the node starts back, it will load and reroute this message
and if it goes to a local consumer, this property won't
get removed and goes to the client.
The fix is to remove this internal property before it
is sent to any client.
Update Tranformer to be able to handle initiation via propertiers (map<string, string>)
Update Configuration to have more specific transfromer configuration type, and to take properties.
Support back compatibility.
Add AddHeadersTransformer which is a main use case, and can act as example also.
Update Control's to expose new property configuration
Add test cases
Update examples for new transformer config style
- it is now possible to disable the TimedBuffer
- this is increasing the default on libaio maxAIO to 4k
- The Auto Tuning on the journal will use asynchronous writes to simulate what would happen on faster disks
- If you set datasync=false on the CLI, the system will suggest mapped and disable the buffer timeout
This closes#1436
This commit superseeds #1436 since it's now disabling the timed buffer through the CLI
priority is stored as a byte in the ICoreMessage's map.
It is stored then in a int when it is converted to JMS (as JMSPriority
header is an Integer).
JIRA: https://issues.apache.org/jira/browse/ARTEMIS-1448
add the adaptTransportConfiguration() method to the
ClientProtocolManagerFactory so that transport configurations used by
the ClientProtocolManager have an opportunity to adapt their transport
configuration.
This allows the HornetQClientProtocolManagerFactory to adapt the
transport configuration received by remote HornetQ broker to replace the
HornetQ-based NettyConnectorFactory by the Artemis-based one.
JIRA: https://issues.apache.org/jira/browse/ARTEMIS-1431
delegate to the jdk saslServer. Allow acceptor configuration of supported mechanismis; saslMechanisms=<a,b>
and allow login config scope for krb5 to be configured via saslLoginConfigScope=x
When calling a consumer to receive message with a timeout
(receive(long timeout), if the consumer's buffer is empty, it sends
a 'forced delivery' the waiting forever, expecting the server to
send back a 'forced delivery" message if the queue is empty.
If the connection is disconnected as the arrived 'forced
delivery' message is corrupted, this 'forced delivery' message
never gets to consumer. After the session is reconnected,
the consumer never knows that and stays waiting.
To fix that we can send a 'forced delivery' to server right
after the session is reconnected.
This is replacing an executor on ServerSessionPacketHandler
by a this actor.
This is to avoid creating a new runnable per packet received.
Instead of creating new Runnable, this will use a single static runnable
and the packet will be send by a message, which will be treated by a listener.
Look at ServerSessionPacketHandler on this commit for more information on how it works.
Add krb5sslloginmodule that will populate userPrincipal that can be mapped to roles independently
Generalised callback handlers to take a connection and pull certs or peerprincipal based on
callback. This bubbled up into api change in securitystore and security manager
Core client with netty connector and acceptor doing kerberos
jaas.doAs around sslengine init such that the SSL handshake can do kerberos ticket
generaton and validation.
The kerberos authenticated user is then validated with the security manager before
being populated into the message userId.
The feature is enabled with the kerb5Config property. When lowercase it is the
principal. With a leading uppercase char it is the login.config entry to use.
The default id-cache-size is 20000 and the default
confirmation-window-size is 1MB. It turns out the 1MB
size is too small for id-cache-size.
To fix it we adjust the confirmation-window-size to 10MB. Also
a test is added to guarantee it won't break this rule when this
default value is to be changed to any new value.
It fixes compatibility issues with JMS Core clients using the old address model, allowing the client to query JMS temporary queues too.
you would eventually see this issue when using older clients:
AMQ119019: Queue already exists
When a broken packet arrives at client side it causes decoding error.
Currently artemis doesn't handle it properly. It should catch such
errors and disconnect the underlying connection, logging a proper
warning message
Use AcitveMQDestination for subscription naming, fixing and aligning queue naming in the process.
The change is behind a configuration toggle so to avoid causing any breaking changes for uses not expecting.
Added a wait-for-activation option to shared-store master HA policies.
This option is enabled by default to ensure unchanged server startup behavior.
If this option is enabled, ActiveMQServer.start() with a shared-store master server will not return
before the server has been activated.
If this options is disabled, start() will return after a background activation thread has been started.
The caller can use waitForActivation() to wait until server is activated, or just check the current activation status.
Wrap the host added to the HTTP request headers with IPV6Util.encloseHost
to ensure that load balancers that reads the header will have a valid
IPv6 address.
JIRA: https://issues.apache.org/jira/browse/ARTEMIS-1043
Use `long` array for hourly counters instead of `int` array.
Prevents overflow when the number of new messages (a `long`) is added.
Fixes one of the "Implicit narrowing conversion in compound assignment"
alerts on https://lgtm.com/projects/g/apache/activemq-artemis/alerts.
Francesco Nigro
Michael André Pearce
Justin Bertram
Clebert Suconic
yang wei
Matt Slonetsky
Emmanuel Hugonnet
Arthur Fritz Santiago
andytaylor
Christopher L. Shannon (cshannon)
Martyn Taylor
Howard Gao
Johan Stenberg
Shailendra Kumar Singh
saurabhrai
Christian Sailer
Jiri Danek
Stanislav Knot
Tomas Hofman
Radovan Stancel
Ingo Weiss
Dmitrii Tikhomirov
rico.pahlisch
Ulf Lilleengen
art-licis
raul.valdoleiros
gtully
Pat Fox
Erich Duda
Timothy Bish
ederign1
Jeff Mesnil
Daniel Kulp
Bernd Gutjahr
Aditya Sharad
Zoran Regvart