Revert previous fix
Keep original ConfigChangeTest
Apply new non-destructive fix.
Enhance tests to ensure messages in queues are not lost either on reload when running or when config changed on-restart (e.g. queue i not destroyed)
Ensure the broker looks at local receiver credit when checking for
credit top off threshold and then do a proper top off back to the high
water mark to sync with how client receivers manage their credit.
First, QueueQuery should use address name for address settings
The name used for looking up address settings for a queue now uses the
address name if there is a local queue binding
Second, make sure sent credits to the server is the correct value
In some cases users who migrate from 1.x to 2.x may still want to keep
the legacy prefixes for their JMS destinations (i.e. "jms.queue.",
"jms.topic.", etc.). This commit adds a boolean on our ConnectionFactory
implementation so that it will use the old prefixes when invoking the
queue/topic creation methods on the Session implementation.
Fix checkstyle
Avoid duplicated logic
Ability to filter and group
Instantiate SimpleString property key once
Get property value via getObjectProprty to ensure all special mapped properties such as in AMQPMessage would return
Avoid a custom string to represent null, instead rely on Java's representation "null" by using Objects.toString to get the string value of the property value used to group by.
An OpenWire client can use a compound destination name of the form
"a,b,c..." and consume from, or subscribe to, multiple destinations.
Such a compound destination only works for topics when the subscriber
is non-durable. Attempting to create a durable subscription on a
compound address will end up with an error.
The cause is when creating durable subs to multiple topics/addresses
the broker uses the same name to create internal queues, which
causes duplicate name conflict.
Parameters going into Wait.waitFor were originally wrong, because
`durationMillis: 3, sleepMillis: 100` means you would test the condition
only once. This commit is changing the durationMillis from 3ms to 3s,
swapping the two numbers (duration 100ms, sleep 3ms) would also be reasonable, I think.
Next, Wait.assertEquals is here being used, instead of Assert.assertTrue.
I saw the test fail only once, and never was able to reproduce it again,
but I think this commit does improve the test and so it is worthwhile.
java.lang.AssertionError
at org.apache.activemq.artemis.tests.integration.management.QueueControlTest.assertMetrics(QueueControlTest.java:2651)
at org.apache.activemq.artemis.tests.integration.management.QueueControlTest.assertMessageMetrics(QueueControlTest.java:2615)
at org.apache.activemq.artemis.tests.integration.management.QueueControlTest.testRemoveAllWithPagingMode(QueueControlTest.java:1554)
The occasional assertion error is prevented by using Wait.assertEquals
where Assert.assertEquals was used previously.
java.lang.AssertionError:
Expected :1
Actual :0
[...]
at org.junit.Assert.assertEquals(Assert.java:542)
at org.apache.activemq.artemis.tests.integration.management.QueueControlTest.testResetMessagesExpired(QueueControlTest.java:2370)
The occasional assertion error is prevented by using Wait.assertEquals
where Assert.assertEquals was used previously.
I did not observe the timing issue on all asserts (only on the first
two), but there is no harm in replacing them all.
java.lang.AssertionError:
Expected :2
Actual :1
The below error is prevented by using Wait.assertEquals
where Assert.assertEquals was used previously.
java.lang.AssertionError:
Expected :2
Actual :1
[...]
at org.junit.Assert.assertEquals(Assert.java:542)
at org.apache.activemq.artemis.tests.integration.management.QueueControlTest.testListMessagesWithNullFilter(QueueControlTest.java:804)
The below error is prevented by using Wait.assertEquals
where Assert.assertEquals was used previously.
java.lang.AssertionError:
Expected :2
Actual :1
[...]
at org.apache.activemq.artemis.tests.integration.management.QueueControlTest.testListMessagesWithEmptyFilter(QueueControlTest.java:827)
This commit adds support for tracking metrics for bridges for both
normal bridges and bridges that are part of a cluster. The two
statistics added in this commit are messages pending acknowledgement
and messages acknowledged but more can be added later.
The below error is prevented by adding Wait.assertEquals,
where Assert.assertEquals was used previously. Timeout is
set to small increments, since we rarely need to wait more
than 100 ms for the condition to become true.
java.lang.AssertionError: expected:<1> but was:<0>
at org.junit.Assert.fail(Assert.java:88)
at org.junit.Assert.failNotEquals(Assert.java:743)
at org.junit.Assert.assertEquals(Assert.java:118)
at org.junit.Assert.assertEquals(Assert.java:555)
at org.junit.Assert.assertEquals(Assert.java:542)
at org.apache.activemq.artemis.tests.integration.client.HeuristicXATest.doRecoverHeuristicCompletedTxWithRestart(HeuristicXATest.java:306)
at org.apache.activemq.artemis.tests.integration.client.HeuristicXATest.testRecoverHeuristicCommitWithRestart(HeuristicXATest.java:251)
Anonymous senders (those created without a target address) are not
blocked when max-disk-usage is reached. The cause is that when such
a sender is created on the broker, the broker doesn't check the
disk/memory usage and gives out the credit immediately.
In a live-backup scenario, if the live is restarted and shutdown too soon,
the client have a chance to fail on failover because it's internal topology
is inconsistent with the final status. The client keeps connecting to live
already shut down, never trying to connect to the backup.
It's a porting from HORNETQ-1572.
Tests should always extend ActiveMQTestBase whenever is possible.
This is because there are a few rules to avoid thread leakages.
The test was also leaking an executor and I believe it was
not always stopping the servers, which I fixed here.
When "large" messages are converted to / from core in order to be stored
in the large message store the type of the AMQP body section is being
lost and reconstituted incorrectly in some cases. The message needs to
be annotated with the original AMQP type for the body and that used to
manage the conversion back to AMQP from Core.
This reverts commit c3fbd1b9e4.
Based on the discussion on the PR
https://github.com/apache/activemq-artemis/pull/2035 this shouldn't have
been merged. It's importing JMS-specific code into the core broker which
is something we've worked hard to eliminate in recent releases.
Avoids pooling corner cases interacting with ARTEMIS 1843 + ARTEMIS 1861 improvements.
Also tagging ARTEMIS-1941 to note test needs altered along with it.
updates max frame size tests to verify behaviour seen with standalone
brokers rather than non represenative test-only conditions, as well
as more closely validate the recieved messages
Calling close multiple times on ServerConsumer can result in multiple
notifications being routed around the cluster. This causes cluster
topology info to become skewed. Which affects a number of components
such as message redistribution, metrics and can eventually cause OOM
should multiple queues be redistributing at the same time.
Quorum voting is used by both the live and the backup to decide what to do if a replication connection is disconnected.
Basically, the server will request each live server in the cluster to vote as to whether it thinks the server it is replicating to or from is still alive.
You can also configure the time for which the quorum manager will wait for the quorum vote response.
Currently, the value is hardcoded as 30 sec. We should change this 30-second wait to be configurable.
Added an example to demonstrate how to configure and use openssl
Moved/Added netty-tcnative dependency to artemis-distribution
Changed artemis-jms-client-all pom to exclude io.netty from relocation
so that the native openssl can be loaded
1. Add tests case to verify issue and fix, tests also tests for same behavior using CORE, OPENWIRE and AMQP JMS Clients.
2. Update Core Client to check for queue before creating, sharedQueue as per createQueue logic.
3. Update ServerSessionPacketHandler to handle packets from old clients to perform to implement the same fix server side for older clients.
4. Correct AMQP protocol so correct error code is returned on security exception so that amqp jms can correctly throw JMSsecurityException
5. Correct AMQP protocol to check for queue exists before create
6. Correct OpenWire protocol to check for address exists before create
If a client ack mode consumer receives a message and closes without
acking it, the redelivery of the message won't set the redelivery
flag (JMSRedelivered) because it doesn't increment the delivery count
when message is cancelled back to queue.
Replace guava Preconditions with artemis Preconditions
Replace guava Predicate with java Predicate
Replace guava Ordering with java Comparator
Replace guava Immutable, with ArrayList/Set and then wrap with unmodifiable
Configure a value of 128KB for AMQP max frame size by default to improve
overall performance and provide a limit on delivery size before chunking
begins.
Use new no copy variants for the delivery send and receive and make
use of the ReadableBuffer type that is now used to convery tranfer
payloads without a copy. Also set max outgoing frame size to match
the configured maxFrameSize for the AMQP protocol head to avoid the
case where an overly large frame can be written instead of chunking
a large message.
QuorumFailOverTest.testQuorumVotingLiveNotDead fails
because the quorum vote takes longer time to finish than
the test expects to.
(The test used to pass until commit ARTEMIS-1763)
The previous commit about this feature wasn't using the row count query
ResultSet.
The mechanics has been changed to allow the row count query
to fail, because DROP and CREATE aren't transactional and immediate
in most DBMS.
It includes a test that stress its mechanics if used with DBMS like
DB2 10.5 and Oracle 12c.
Additional checks and logs have been added to trace each steps.
Expose method to return current mappings of groups to consumers
Expose methods to reset (remove) specific group mapping from groupID to Consumer
Expose methods to reset (remove) all group mappings
messageAcknowledged plugin callback methods
Knowing the consumer that expired or acked a message (if available) is
useful and right now a message reference only contains a consumer id
which by itself is not unique so the actual consumer needs to be passed
The queue metrics were being decremented improperly because on iteration
over the cancelled scheduled messages because the flag for fromMessageReferences was not
set to false. Setting the flag to false skips over the metrics update
which is what we want as the scheduled messages were never added to the
message references in the first place so the metrics don't need updating
When creating a temp destination and auto-create-address set to false, the
broker throws an error and refuse to create it. This doesn't conform to
normal use-case (like amqp dynamic flag) where the temp destination should
be allowed even if the auto-create-address is false.
Make sure the correct buffer is used when decoding the stored Core
message that originated from the conversion of an AMQP message sent and
annotated as a JMS ObjectMessage which trips the large message boundary.
The cluster connection bridge has a TopologyListener and connects to a new node
each time it receives a nodeUp() event. It needs to put a check here to make
sure that the cluster bridge only connects to its target node and it's backups.
This issue shows up when you run LiveToLiveFailoverTest.testConsumerTransacted
test.
Also in this commit improvement of BackupSyncJournalTest so that it runs more
stable.
Add Test Case to stop and restart server after config reload and check state, this re-creates network health check issue where config changes are lost when network health check de-activates the server and then re-activates.
Add fix to update the held configuration thats used when initialisation steps during start are done.
connection
To prevent a socket from hanging open by a bad client the broker should
make sure to stop the transport if a connection attempt fails by an
OpenWire client
Revert #1875
This reverts commit 5ad45369ce.
The storage manager is broken now as the AddressManager change here is trying to insert a record on the journal before startup.
- LargeServerMessageImpl.finalize is eventually causing deadlocks
- CoreMessage needs to check properties before decoding
- PagingTest tweaks
- ServerLocatorImpl can deadlock eventually, avoiding a lock and using actors
- ActiveMQServerImpl.finalize is also evil and can cause deadlocks on the testsuite
- MqttClusterRemoteSubscribeTest needs to setup the Address now on the setup
The PageCountPendingImpl was increasing the encode size without using its full allocation.
This was causing issues on replication as the encode is also used to determine the size of the packets.
however the packets were not receive the full allocated data causing missing packets on the replication
and test failures.
This is fixing the issue
Adding new metrics for tracking message counts and sizes on a Queue.
This includes tracking metrics for pending, delivering and scheduled
messages. The paging store also tracks message size now.
Support exlusive consumer
Allow default address level settings for exclusive consumer
Allow queue level setting in broker.xml
Add the ability to set queue settings via Core JMS using address. Similar to ActiveMQ 5.X
Allow for Core JMS client to define exclusive consumer using address parameters
Add tests
Make sure that if a bridge disconnects and there is no record in the topology that it uses the original bridge connector to reconnect.
Originally the live broker that disconnected was left in the Topology, thie broke quorum voting as when th evote happened all brokers when asked though th etarget broker was still alive.
The fix for this was to remove the target live broker from the Topology. Since the bridge reconnect logic relied on this in a non HA environment to reconnect this stopped working.
The fix now uses the original target connector (or backup) to reconnect in the case where the broker was actually removed from the cluster.
https://issues.apache.org/jira/browse/ARTEMIS-1654
When using the tool to import more than one large messages
from xml exported file, this utility class will create some
tmp files, each for one large message. However it only delete
one of the tmp files. All the rest of tmp files won't get
cleaned up.
HornetQClientProtocolManager is used to connect HornteQ servers.
During reconnect, it sends a CheckFailoverMessage packet to the
server as part of reconnection. This packet is not supported by
HornetQ server (existing release), so it will break the backward
compatibility.
Also fixed a failover issue where a hornetq NettyConnector's
ConnectorFactory is serialized to the clients who cannot
instantiate it because class not found exception.
ActiveMQTestBase has been enhanced to expose the Database storage configuration and by adding specific JDBC HA configuration properties.
JdbcLeaseLockTest and NettyFailoverTests have been changed in order to make use of the JDBC configuration provided by ActiveMQTestBase.
JdbcNodeManager has been made restartable to allow failover tests to reuse it after a failover.
Test consistency between live and backup, espacially on
a slow live.
The test use MessagePersister::encode to simulate slow IO condition.
After live started, we send 5 message with a delay(default 500ms),
then start backup, wait until replicated, then send more message
without delay. If all message sent successfully, the backup should
has the same messages as live. We assert the message number only.
Flag needs to be set when auto creating an address so that the address
can be removed later if auto delete is configured when creating a
subscription with MQTT
We provide a feature to mask passwords in the configuration files.
However, passwords in the bootstrap.xml (when the console is
secured with HTTPS) cannot be masked. This enhancement has
been opened to allow passwords in the bootstrap.xml to be masked
using the built-in masking feature provided by the broker.
Also the LDAPLoginModule configuration (in login.config) has a
connection password attribute that also needs this mask support.
In addition the ENC() syntax is supported for password masking
to replace the old 'mask-password' flag.
Change all use from Set<RoutingType> to EnumSet<RoutingType>
Deprecating any old exposed interfaces but keeping for back compatibility.
Address info to avoid iterator on getRoutingType hotpath, like wise can be avoided where single RoutingType is passed in.
When an address is removed from the address manager its linked addresses
also need to be removed if there are no more bindings for the address.
Also adding a null check on bindings of linked addresses when a new
binding is added
* Move byte util code into ByteUtil
* Re-use the new equals method in SimpleString
* Apply same pools/interners to client decode
* Create String to SimpleString pools/interners for property access via String keys (producer and consumer benefits)
* Lazy init the pools on withing the get methods of CoreMessageObjectPools to get the specific pool, to avoid having this scattered every where.
* reduce SimpleString creation in conversion to/from core message methods with JMS wrapper.
* reduce SimpleString creation in conversion to/from Core in OpenWire, AMQP, MQTT.
Replace GenericSQLProvider and other implementation by a single
PropertySQLProvider that uses properties to define SQL queries.
SQL queries are loaded from the journal-sql.properties file.
Queries specific to a DB dialect can be specified by adding a suffix to
the key of the generic property.
For example, the generic property to create a file Table is:
create-file-table = CREATE TABLE %s (ID BIGINT AUTO_INCREMENT, ...)
This property can be customized for Derby by using the
create-file-table.derby property:
create-file-table.derby=CREATE TABLE %s (ID BIGINT NOT NULL GENERATED ALWAYS AS IDENTITY (START WITH 1, INCREMENT BY 1),...
JIRA: https://issues.apache.org/jira/browse/ARTEMIS-1590
The test is using the wrong indices for the destinations it uses so they
don't match the one's created in the test support class. Because the
code is now using the default routing type the test fails when it tries
to send a message on a JMS Queue when the auto created address default
to the multicast routing type.
Expose User associated with creating Queue on JMX QueueControl (as attribute)
Allow setting of the user to associate with creating the queue when configured in broker.xml (before only if created over wire is it possible to set the user)
These tests used to have a wrong name, so they weren't executed by
Surefire during a `mvn test` run.
After enablement, the following tests are now failing:
* org.apache.activemq.artemis.tests.integration.cluster.ha.HAAutomaticBackupSharedStoreTest
* org.apache.activemq.artemis.tests.integration.ra.OutgoingConnectionNoJTATest
* org.apache.activemq.artemis.tests.unit.core.server.group.impl.SystemPropertyOverrideTest.testSystemPropertyOverride
When openwire client uses compressed option to send messages
(jms.useCompression=true) openwire client failed to receive them.
The reason is in OpenwireMessageConverter.toAMQMessage():
1. message.setContent() should be called after setting properties
(It will cause the compressed content to decompressed before delivering to clients)
2. message.onSend() should not be called here (it should be used
by producers. If used here it changes the internal flags of the
message and cause receive to fail).
Revert "ARTEMIS-1545 Adding HornetQ 2.4.7 on the mesh to validate send-acks"
I'm reverting this as the testsuite is broken..
We will send it back once worked out.
This reverts commit 8f5b7a1e73.
This reverts commit 9b982b3e30.
Unsubscribe topic in clustered environment left open references to the core consumer. This patch properly closes the consumer which results in correct removal of the consumer reference on a remote queue.
Openwire clients create consumers to advisory topics to receive
notifications. As a result there are internal queues created
on advisory topics. Those consumer shouldn't be exposed via
management APIs which are used by the Console
To fix that the broker doesn't register any queues from
advisory addresses.
Also refactors a code to remove Openwire specific contants
from AddressInfo class.
I'm doing an overal improvement on large message support for AMQP
However this commit is just about a Bug on the converter.
It will be moot after all the changes I'm making, but I would rather keep this separate
as a way to cherry-pick on previous versions eventually.
This test starts 2 servers and send messages to
a queue until it enters into paging state. Then
it changes the address max-size to -1, restarts
the 2 servers again and consumes all the messages.
It verifies that even if the max-size has changed
all the paged messages will be depaged and consumed.
No stuck messages after restarting.
The tests is there to guard a case where messages
won't be depaged on server restart after the max-size
is changed to -1. This issue has been fixed into
master along with the fix for ARTEMIS-581, particularly
the changes to the method PagingStoreImpl.getMaxSize().
Server.stop is currently waiting completions on Sessions just because of test cases.
With the recent changes made into the Executors this is not needed any longer
Instead of flushing we just need to make sure there are no more calls into
page executors as we stop the PageManager.
This will avoid any possible starvations or deadlocks here.
The MappedSequentialFile relies on the assumption that any writers
won't exceed the maximum capacity of the file, leaving the JVM to crash otherwise.
This commit adds proper bounds checking on write operations (and position changes too)
in order to provide recoverable effects if such scenario should occour.
In addition are provided minor fixes on Mapped and Nio SequentialFile::fill behaviour
to match the original contract.
- Added Wait.assert methods, what would make it easier to assert on future conditions
- Moved Wait to artemis-junit, we are now using that module on the testsuite
Added a new trustAll flag which will support trusting any client
keystore when doing testing against a broker. This setting should not
be used in production and is strictly for testing.
Extend test cases in MessageTypesTest to cover Core to AMQP combinations for all JMSTypeTests
Fix ServerJMSBytesMessage to correctly return bodyLength
Remove unused/dead code
Openwire consumer is listed twice below "consumers" tab.
First it shows correctly the requested queue consume.
Second it shows consumer from multicast queue ActiveMQ.Advisory.
The second one is internal and should be hidden.
In a cluster if a node is shut down (or crashed) when a
message is being routed to a remote binding, a internal
property may be added to the message and persisted. The
name of the property is like _AMQ_ROUTE_TOsf.my-cluster*.
if the node starts back, it will load and reroute this message
and if it goes to a local consumer, this property won't
get removed and goes to the client.
The fix is to remove this internal property before it
is sent to any client.
Update Tranformer to be able to handle initiation via propertiers (map<string, string>)
Update Configuration to have more specific transfromer configuration type, and to take properties.
Support back compatibility.
Add AddHeadersTransformer which is a main use case, and can act as example also.
Update Control's to expose new property configuration
Add test cases
Update examples for new transformer config style
- it is now possible to disable the TimedBuffer
- this is increasing the default on libaio maxAIO to 4k
- The Auto Tuning on the journal will use asynchronous writes to simulate what would happen on faster disks
- If you set datasync=false on the CLI, the system will suggest mapped and disable the buffer timeout
This closes#1436
This commit superseeds #1436 since it's now disabling the timed buffer through the CLI
Allows for JMS selectors on JMSCorrelationID as well as JMSXGroupID
and JMSXUserID along with some fixes to avoid an NPE case and fixes
to the conversion of AMQP MessageID and CorrelationID values when
doing cross protocol mappings. Adds new tests to cover more cases
of using the JMS selector with Qpid JMS and the AMQP test client.
If message senders and receivers uses different
wireformat.tightEncodingEnabled options, broker will get marshalling
problem. This is because when openwire messages are converted to
core messages, and later these core messages converted to openwire
messages, the broker uses a mashaller that comes with the connection
used to carry the messages.
For example, if a producer sents a message using option "wireformat
.tightEncodingEnabled=false" and a receiver tries to receive it
using 'true' for the same option, it'll never get it because the
broker will fail to use a "tight encoding" marshaller to
decode a 'loose encoded' message.
To fix the problem, we always use 'tight encoding' for internal
message converters.
Michael André Pearce
Clebert Suconic
andytaylor
Justin Bertram
Timothy Bish
Christopher L. Shannon (cshannon)
Carsten Lohmann
Martyn Taylor
Arthur Fritz Santiago
Howard Gao
Robbie Gemmell
Jiri Danek
Shailendra Kumar Singh
JiriOndrusek
17103355
yang wei
Francesco Nigro
Benjamin Graf
Keith Wall
saurabhrai
Christian Sailer
Ingo Weiss
Stanislav Knot
Lionel Cons
Ulf Lilleengen
gtully
raul.valdoleiros
Guillaume Nodet
Pat Fox
jpoth
jostbg
Jeff Mesnil
shoukun
art-licis
Tomas Kratky
Chris Burlinchon
Robert Godfrey
Jens Reimann