Correct two annotation inconsistences in the new overload of
ActiveMQServerControl#addAddressSettings introduced by ARTEMIS-2810.
These names don't follow the key names used in getAddressSettingsAsJSON.
ORIG message propertes like _AMQ_ORIG_ADDRESS are added to messages
during various broker operations (e.g. diverting a message, expiring a
message, etc.). However, if multiple operations try to set these
properties on the same message (e.g. administratively moving a message
which eventually gets sent to a dead-letter address) then important
details can be lost. This is particularly problematic when using
auto-created dead-letter or expiry resources which use filters based on
_AMQ_ORIG_ADDRESS and can lead to message loss.
This commit simply over-writes the existing ORIG properties rather than
preserving them so that the most recent information is available.
Add the command `check` to the Command Line utility. This command exposes some
checks for nodes and queues using the management API for most of them.
The checks have been implemented to be modular. Each user can compose his own
health check, ie to produce and consume from a queue the command is
`artemis check queue --name TEST --produce 1 --consume 1`.
- when sending messages to DLQ or Expiry we now use x-opt legal names
- we now support filtering thorugh annotations if using m. as a prefix.
- enabling hyphenated_props: to allow m. as a prefix
This commit does the following:
- Deprecates existing overloaded createQueue, createSharedQueue,
createTemporaryQueue, & updateQueue methods for ClientSession,
ServerSession, ActiveMQServer, & ActiveMQServerControl where
applicable.
- Deprecates QueueAttributes, QueueConfig, & CoreQueueConfiguration.
- Deprecates existing overloaded constructors for QueueImpl.
- Implements QueueConfiguration with JavaDoc to be the single,
centralized configuration object for both client-side and broker-side
queue creation including methods to convert to & from JSON for use in
the management API.
- Implements new createQueue, createSharedQueue & updateQueue methods
with JavaDoc for ClientSession, ServerSession, ActiveMQServer, &
ActiveMQServerControl as well as a new constructor for QueueImpl all
using the new QueueConfiguration object.
- Changes all internal broker code to use the new methods.
Due to the changes in 6b5fff40cb the
config parameter message-expiry-thread-priority is no longer needed. The
code now uses a ScheduledExecutorService and a thread pool rather than
dedicating a thread 100% to the expiry scanner. The pool's size can be
controlled via scheduled-thread-pool-max-size.
Add a Netty socks proxy handler during channel initialisation to allow
Artemis to communicate via a SOCKS proxy. Supports SOCKS version 4a & 5.
Even if enabled in configuration, the proxy will not be used when the
target host is a loopback address.
In case there is a hardware, firewal or any other thing making the UDP connection to go deaf
we will now reopen the connection in an attempt to go over possible issues.
This is also improving locking around DiscoveryGroup initial connection.
This is a Large commit where I am refactoring largeMessage Body out of CoreMessage
which is now reused with AMQP.
I had also to fix Reference Counting to fix how Large Messages are Acked
And I also had to make sure Large Messages are transversing correctly when in cluster.
- Avoid some Properties Decoding, checking if we need certain properties like scheduled delivery
- Avoid creating some unnecessary SimpleString instances
- Removed some intermediate ActiveMQBuffer allocation
- Removed some intermediate UnreleasableByteBuf allocation
Second attempt to fix the following compiler warning that is reported in Travis builds, this time using the correct cast type `Class<?>[]` which prevents temporary object allocation because of var-args handling:
```java
/home/travis/build/apache/activemq-artemis/artemis-core-client/src/main/java/org/apache/activemq/artemis/core/protocol/core/impl/wireformat/FederationStreamConnectMessage.java:151: warning: non-varargs call of varargs method with inexact argument type for last parameter;
return (FederationPolicy) Class.forName(clazz).getConstructor(null).newInstance();
cast to Class<?> for a varargs call
cast to Class<?>[] for a non-varargs call and to suppress this warning
```
This fixes the following compiler warning that is reported in Travis builds:
```
/home/travis/build/apache/activemq-artemis/artemis-core-client/src/main/java/org/apache/activemq/artemis/core/protocol/core/impl/wireformat/FederationStreamConnectMessage.java:151: warning: non-varargs call of varargs method with inexact argument type for last parameter;
return (FederationPolicy) Class.forName(clazz).getConstructor(null).newInstance();
cast to Class<?> for a varargs call
cast to Class<?>[] for a non-varargs call and to suppress this warning
```
When AMQPMessages are redistributed from one node to
another, the internal property of message is not
cleaned up and this causes a message to be routed
to a same queue more than once, causing duplicated
messages.
This commit introduces the ability to configure a downstream connection
for federation. This works by sending information to the remote broker
and that broker will parse the message and create a new upstream back
to the original broker.
A new feature to preserve messages sent to an address for queues that will be
created on the address in the future. This is essentially equivalent to the
"retroactive consumer" feature from 5.x. However, it's implemented in a way
that fits with the address model of Artemis.
The parameter failoverOnInitialConnection wouldn't seem to be used and
makes no sense any more, because the connectors are retried in a loop.
So someone can just add the backup in the initial connection.
When CoreMessage is doing copyHeadersAndProperties() it doesn't
make a full copy of its properties (a TypedProperties object).
It will cause problem when multiple threads/parties are modifying the
properties of the copied messages from the same message.
This will be particular bad if the message is a large message
where moveHeadersAndProperties is being used.
After a node is scaled down to a target node, the sf queue in the
target node is not deleted.
Normally this is fine because may be reused when the scaled down
node is back up.
However in cloud environment many drainer pods can be created and
then shutdown in order to drain the messages to a live node (pod).
Each drainer pod will have a different node-id. Over time the sf
queues in the target broker node grows and those sf queues are
no longer reused.
Although use can use management API/console to manually delete
them, it would be nice to have an option to automatically delete
those sf queue/address resources after scale down.
In this PR it added a boolean configuration parameter called
cleanup-sf-queue to scale down policy so that if the parameter
is "true" the broker will send a message to the
target broker signalling that the SF queue is no longer
needed and should be deleted.
If the parameter is not defined (default) or is "false"
the scale down won't remove the sf queue.
* Upgrading versions
* Adding wildfly-common dependency as jboss-logmanager now depends on it
for simple common operations such as getting hostname or process id
* Updating bootclasspath with wildfly-common
Add tests
Add fix - if timeout occurs on sending packet, calls same code that is invoked if timeout occurs on during ping aligning logic, and ensuring JMS connection exception listener gets invoked to inform the client logic to react.
Historically the broker has read the XML configuration file as a String,
substituted system properties, and then parsed that String into an XML
document. However, this method won't substitute system properties in the
files which are imported via xinclude. In order to substitue system
properties in xincluded files the substitution needs to be performed
after the file is parsed into an XML document. This commit implements
that change and refactors the XMLUtil class a bit to eliminate redundant
code, obsolete comments, etc.
Implement using the ActiveMQ5 JMSXGroupFirstForConsumer, property as default, but make it possible for future to make it configurable easily. (Not this PR)
Add test
In adding auto-delete queue level feature, its been noticed as some feature bits were added during hot fix branch, that there's api break with the 2.6.x hotfix branch.
This addresses that by fixing this in 2.7.x
Multiple consumers using the same clientId in the cluster, the last consumer connection should close the previous consumer connection!
ARTEMIS-2226 last consumer connection should close the previous consumer connection
to address apache-rat-plugin:0.12:check
ARTEMIS-2226 last consumer connection should close the previous consumer connection
to address checkstyle
ARTEMIS-2226 last consumer connection should close the previous consumer connection
adjust the code structure
ARTEMIS-2226 last consumer connection should close the previous consumer connection
adjust the code structure
ARTEMIS-2226 last consumer connection should close the previous consumer connection
adjust the code structure
ARTEMIS-2226 last consumer connection should close the previous consumer connection
adjust the code structure
ARTEMIS-2226 last consumer connection should close the previous consumer connection
adjust the code structure
ARTEMIS-2226 last consumer connection should close the previous consumer connection
add javadoc
Add ability to configure when creating auto created queues at the queue level
Add support for configuring message count check
Add test cases
Update docs
Support using group buckets on a queue for better local group scaling
Support disabling message groups on a queue
Support rebalancing groups when a consumer is added.
Push isDirectDeliver method from netty impl, to the Connection interface
Add support to InVMConnection for isDirectDeliver flag and ability to set via config, defaulting to false, to keep current default behavior.
Extend DirectDeliverTest to check InVM as well.
Any checkProperties();<usage of this.properties> pattern has been
replaced by an atomic checkProperties().<usage of returned properties>
to help both performance and consistency.
The cleanup is now performed into CoreTypedProperties both
for performance reasons (avoid lock/unlock many times)
and consistency, given that the operation is now atomic.
Add consumer priority support
Includes refactor of consumer iterating in QueueImpl to its own logical class, to be able to implement.
Add OpenWire JMS Test - taken from ActiveMQ5
Add Core JMS Test
Add AMQP Test
Add Docs
Emmanuel Hugonnet
Keith Wall
Justin Bertram
Robbie Gemmell
Jacob Middag
Michael Pearce
Francesco Nigro
Clebert Suconic
brusdev
Chris Rog
Andy Taylor
Atri Sharma
Andrius Dagys
Howard Gao
Christopher L. Shannon (cshannon)
Sebastian Thomschke
yang wei
Emmanuel Hugonnet
Dmitry Volodin
Jiri Danek
onlyMIT
Otavio R. Piske