This commit does the following:
- Deprecates existing overloaded createQueue, createSharedQueue,
createTemporaryQueue, & updateQueue methods for ClientSession,
ServerSession, ActiveMQServer, & ActiveMQServerControl where
applicable.
- Deprecates QueueAttributes, QueueConfig, & CoreQueueConfiguration.
- Deprecates existing overloaded constructors for QueueImpl.
- Implements QueueConfiguration with JavaDoc to be the single,
centralized configuration object for both client-side and broker-side
queue creation including methods to convert to & from JSON for use in
the management API.
- Implements new createQueue, createSharedQueue & updateQueue methods
with JavaDoc for ClientSession, ServerSession, ActiveMQServer, &
ActiveMQServerControl as well as a new constructor for QueueImpl all
using the new QueueConfiguration object.
- Changes all internal broker code to use the new methods.
Add a Netty socks proxy handler during channel initialisation to allow
Artemis to communicate via a SOCKS proxy. Supports SOCKS version 4a & 5.
Even if enabled in configuration, the proxy will not be used when the
target host is a loopback address.
This is a Large commit where I am refactoring largeMessage Body out of CoreMessage
which is now reused with AMQP.
I had also to fix Reference Counting to fix how Large Messages are Acked
And I also had to make sure Large Messages are transversing correctly when in cluster.
This is a surprisingly large change just to fix some log messages, but
the changes were necessary in order to get the relevant data to where it
was being logged. The fact that the data wasn't readily available is
probably why it wasn't logged in the first place.
This commit introduces the ability to configure a downstream connection
for federation. This works by sending information to the remote broker
and that broker will parse the message and create a new upstream back
to the original broker.
A new feature to preserve messages sent to an address for queues that will be
created on the address in the future. This is essentially equivalent to the
"retroactive consumer" feature from 5.x. However, it's implemented in a way
that fits with the address model of Artemis.
When CoreMessage is doing copyHeadersAndProperties() it doesn't
make a full copy of its properties (a TypedProperties object).
It will cause problem when multiple threads/parties are modifying the
properties of the copied messages from the same message.
This will be particular bad if the message is a large message
where moveHeadersAndProperties is being used.
After a node is scaled down to a target node, the sf queue in the
target node is not deleted.
Normally this is fine because may be reused when the scaled down
node is back up.
However in cloud environment many drainer pods can be created and
then shutdown in order to drain the messages to a live node (pod).
Each drainer pod will have a different node-id. Over time the sf
queues in the target broker node grows and those sf queues are
no longer reused.
Although use can use management API/console to manually delete
them, it would be nice to have an option to automatically delete
those sf queue/address resources after scale down.
In this PR it added a boolean configuration parameter called
cleanup-sf-queue to scale down policy so that if the parameter
is "true" the broker will send a message to the
target broker signalling that the SF queue is no longer
needed and should be deleted.
If the parameter is not defined (default) or is "false"
the scale down won't remove the sf queue.
Most connection related properties, like the SSL ones, currently
have to be encoded in the brokerURL. When configuring connections
purely through JNDI bindings, this is not always desireable.
This commit allows one to configure all properties included
in TransportConstants.ALLOWABLE_CONNECTOR_KEYS to be listed separately
in the JNDI bindings. These properties are then zipped into any
provided brokerURL. For properties that appear in both places,
the one specified separately in the JNDI bindings takes priority.
This commit should not affect any configuration other than those
configure through JNDIReferenceFactory.
If a jms client (be it openwire, amqp, or core jms) receives a message that
is from a different protocol, the JMSMessageID maybe null when the
jms client expects it.
* Upgrading versions
* Adding wildfly-common dependency as jboss-logmanager now depends on it
for simple common operations such as getting hostname or process id
* Updating bootclasspath with wildfly-common
Historically the broker has read the XML configuration file as a String,
substituted system properties, and then parsed that String into an XML
document. However, this method won't substitute system properties in the
files which are imported via xinclude. In order to substitue system
properties in xincluded files the substitution needs to be performed
after the file is parsed into an XML document. This commit implements
that change and refactors the XMLUtil class a bit to eliminate redundant
code, obsolete comments, etc.
This test fails occasionally because the queue's delivering thread
may interference with the consumer's iterator during consumers adding.
The result is that the first of the 2 consumers may get iterated
twice and therefore the messages received by the 2 consumers are
not even.
Tha change puts the message add after the consumer add so that
the delivering thread only kicks off after consumers are all added
and messages should be evenly distributed to both consumers.
Add ability to configure when creating auto created queues at the queue level
Add support for configuring message count check
Add test cases
Update docs
Support using group buckets on a queue for better local group scaling
Support disabling message groups on a queue
Support rebalancing groups when a consumer is added.
* Using SpawnedVMSupport (used to be on testsuite, moving it to Utils)
* Building the classpath for ./lib, similar to what happens on Bootstrap
* Using Path as much as possible to avoid issues encoding files
Add consumer priority support
Includes refactor of consumer iterating in QueueImpl to its own logical class, to be able to implement.
Add OpenWire JMS Test - taken from ActiveMQ5
Add Core JMS Test
Add AMQP Test
Add Docs
There's a *slight* semantic change with the behavior of the queue query
and binding query to make them consistent with the address query, namely
that they will return the name of the queue and the name of the address
in every case and the returned names will be not use the FQQN syntax but
will be parsed to reflect their actual names in the broker.
These improvements were also part of this task:
- Routing is now cached as much as possible.
- A new Runnable is avoided for each individual message,
since we use the Netty executor to perform delivery
https://issues.apache.org/jira/browse/ARTEMIS-2205
FakeQueue is not correctly setting the queue on its PageSubscription,
leading to fail the test due to NPEs when PageSubscription::getQueue
is being used.
Compaction is now reusing direct ByteBuffers on both
reading and writing with explicit and deterministic
release to avoid high peak of native memory utilisation
after compaction.
Implement custom LVQ Key and Non-Destructive in broker - protocol agnostic
Make feature configurable via broker.xml, core apis and activemqservercontrol
Add last-value-key test cases
Add non-destructive with lvq test cases
Add non-destructive with expiry-delay test cases
Update documents
Add new methods to support create, update with new attributes
Refactor to pass through queue-attributes in client side methods to reduce further method changes for adding new attributes in future and avoid methods with endless parameters. (note: in future this should prob be done server side too)
Update existing test cases and fake impls for new methods/attributes
Given that NettyConnector::createConnection isn't happening on the
channel's event loop, it could race with a channel close event, that
would clean the whole channel pipeline, leading to a NPE while
trying to use a configured channel handler of the pipeline.
Extend test case to reproduce problem of client created queues being incorrectly removed on simple reload of config.
Add a flag/field to the queues created by configuration/broker.xml so we can correctly filter only queues created/managed by config.
Update listConfiguredQueues to use the new queue flag
Add Tests
Add implementation inline with other queue updatable settings.
Enhance tests to ensure queue is not destroyed during config change and messages in queue already are preserved
Update the Qpid JMS and Proton dependencies to lastest and sync Netty
with the 4.1.28.Final version used by Qpid JMS to avoid clash that
breaks a test. Adds override of new Proton-J WritableBuffer API that
allows it to use the Netty String encoder when needed instead of the
slower default version.
Update Qpid JMS to v0.36.0
Proton-J to v0.29.0
Netty to 4.1.28.Final
In some cases users who migrate from 1.x to 2.x may still want to keep
the legacy prefixes for their JMS destinations (i.e. "jms.queue.",
"jms.topic.", etc.). This commit adds a boolean on our ConnectionFactory
implementation so that it will use the old prefixes when invoking the
queue/topic creation methods on the Session implementation.
The deliver loop won't give up trying to deliver messages when
back-pressure kicks in (credits and/or TCP) if msg grouping is used and
there are many consumers registered: this change will allow the loop
to exit by instructing the logic that the group consumer is the only
consumer to check.
This test was initializing a libaio of 21K, that would fail on limited servers.
This is decreasing maxIO so it would requires less resources to run it.
Anonymous senders (those created without a target address) are not
blocked when max-disk-usage is reached. The cause is that when such
a sender is created on the broker, the broker doesn't check the
disk/memory usage and gives out the credit immediately.
Expose method to return current mappings of groups to consumers
Expose methods to reset (remove) specific group mapping from groupID to Consumer
Expose methods to reset (remove) all group mappings
messageAcknowledged plugin callback methods
Knowing the consumer that expired or acked a message (if available) is
useful and right now a message reference only contains a consumer id
which by itself is not unique so the actual consumer needs to be passed
When finding out if a connector belong to a target node it compares
the whole parameter map which is not necessary. Also in understanding
the connector the best place is to delegate it to the corresponding
remoting connection who understands it. (e.g. INVMConnection knows
whether the connector belongs to a target node by checking it's
serverID only. The netty ones only need to match host and port, and
understanding that localhost and 127.0.0.1 are same thing).
Travis CI has been reporting test failures.
Looking on logs I could see a critical failure happening but not much information on why.
This will help identify further issues.
Logging for the "fast-tests" profile used for PR builds could be reduced
significantly. This would save time as well as prevent log truncation
(Travis CI only supports logs up to 4MB).
Adding new metrics for tracking message counts and sizes on a Queue.
This includes tracking metrics for pending, delivering and scheduled
messages. The paging store also tracks message size now.
Support exlusive consumer
Allow default address level settings for exclusive consumer
Allow queue level setting in broker.xml
Add the ability to set queue settings via Core JMS using address. Similar to ActiveMQ 5.X
Allow for Core JMS client to define exclusive consumer using address parameters
Add tests
Change all use from Set<RoutingType> to EnumSet<RoutingType>
Deprecating any old exposed interfaces but keeping for back compatibility.
Address info to avoid iterator on getRoutingType hotpath, like wise can be avoided where single RoutingType is passed in.
When an address is removed from the address manager its linked addresses
also need to be removed if there are no more bindings for the address.
Also adding a null check on bindings of linked addresses when a new
binding is added
These tests used to have a wrong name, so they weren't executed by
Surefire during a `mvn test` run.
After enablement, the following tests are now failing:
* org.apache.activemq.artemis.tests.integration.cluster.ha.HAAutomaticBackupSharedStoreTest
* org.apache.activemq.artemis.tests.integration.ra.OutgoingConnectionNoJTATest
* org.apache.activemq.artemis.tests.unit.core.server.group.impl.SystemPropertyOverrideTest.testSystemPropertyOverride
Apply fix so that when using JNDI via tomcat resource it works.
Replace original extract of JNDIStorable taken from Qpid, and use ActiveMQ5's as fits better to address this issue. (which primary use case is users migrating from 5.x)
Refactored ActiveMQConnectionFactory to externalise and turn into reference by StringRefAddr's instead of custom RefAddr which isnt standard.
Refactored ActiveMQDestinations similar
Refactored ActiveMQDestination to remove redundent and duplicated name field and ensured getters still behave the same
https://issues.apache.org/jira/browse/ARTEMIS-1546
- the dependency scan is changed to allow adding an extra repository
- adding groovy so we won't require compilation dependencies (just runtime)
without needing reflection (thanks Groovy :) )
- Adding hornetq to the mesh of version tests
Added a new trustAll flag which will support trusting any client
keystore when doing testing against a broker. This setting should not
be used in production and is strictly for testing.
Instead of wait to flush an executor,
I have added a method isFlushed() which will just translate to the
state on the OrderedExecutor.
In the case another executor is provided (for tests) there's a delegate
into normal executors.
When calling a consumer to receive message with a timeout
(receive(long timeout), if the consumer's buffer is empty, it sends
a 'forced delivery' the waiting forever, expecting the server to
send back a 'forced delivery" message if the queue is empty.
If the connection is disconnected as the arrived 'forced
delivery' message is corrupted, this 'forced delivery' message
never gets to consumer. After the session is reconnected,
the consumer never knows that and stays waiting.
To fix that we can send a 'forced delivery' to server right
after the session is reconnected.
This is replacing an executor on ServerSessionPacketHandler
by a this actor.
This is to avoid creating a new runnable per packet received.
Instead of creating new Runnable, this will use a single static runnable
and the packet will be send by a message, which will be treated by a listener.
Look at ServerSessionPacketHandler on this commit for more information on how it works.
gtully
Justin Bertram
Domenico Francesco Bruscino
Michael Pearce
Robbie Gemmell
Clebert Suconic
Francesco Nigro
brusdev
Scott Werner
Jan Šmucr
Emmanuel Hugonnet
Andrius Dagys
Christopher L. Shannon (cshannon)
Howard Gao
Wei Yang
Maarten Boekhold
Tomas Hofman
Emmanuel Hugonnet
yb
Martyn Taylor
Romain Pelisse
Timothy Bish
Johan Stenberg
Christian Sailer
raul.valdoleiros
Stanislav Knot
Jiri Danek
Erich Duda