Examples ======== The Apache ActiveMQ Artemis distribution comes with over 90 run out-of-the-box examples demonstrating many of the features. The examples are available in both the binary and source distribution under the `examples` directory. Examples are split by the following source tree: - features - Examples containing broker specific features. - ha - examples showing failover and reconnection capabilities. - clustered - examples showing load balancing and distribution capabilities. - perf - examples allowing you to run a few performance tests on the server - sub-modules - examples of integrated external modules. - protocols - Protocol specific examples - openwire - mqtt - stomp - amqp A set of Java EE examples are also provided which need WildFly installed to be able to run. Runnning the Examples ===================== To run any example, simply `cd` into the appropriate example directory and type `mvn verify` or `mvn install` (For details please read the readme.html in each example directory). You can use the profile `-Pexamples` to run multiple examples under any example tree. For each server, you will have a created server under `./target/server0` (some examples use more than one server). You have the option to prevent the example from starting the server (e.g. if you want to start the server manually) by simply specifying the `-PnoServer` profile, e.g.: ``` sh # running an example without running the server mvn verify -PnoServer ``` Also under `./target` there will be a script repeating the commands to create each server. Here is the `create-server0.sh` generated by the `Queue` example. This is useful to see exactly what command(s) are required to configure the server(s). ```sh # These are the commands used to create server0 /myInstallDirectory/apache-artemis-1.1.0/bin/artemis create --allow-anonymous --silent --force --no-web --user guest --password guest --role guest --port-offset 0 --data ./data --allow-anonymous --no-autotune --verbose /myInstallDirectory/apache-artemis-1.1.0/examples/features/standard/queue/target/server0 ``` Several examples use UDP clustering which may not work in your environment by default. On linux the command would be: ``` sh route add -net 224.0.0.0 netmask 240.0.0.0 dev lo ``` This command should be run as root. This will redirect any traffic directed to `224.0.0.0` to the loopback interface. On Mac OS X, the command is slightly different: ``` sh sudo route add 224.0.0.0 127.0.0.1 -netmask 240.0.0.0 ``` All the examples use the [Maven plugin](maven-plugin.md), which can be useful for running your test servers as well. This is the common output when running an example. On this case taken from the `Queue` example: ```sh [INFO] Scanning for projects... [INFO] [INFO] ------------------------------------------------------------------------ [INFO] Building ActiveMQ Artemis JMS Queue Example 1.1.0 [INFO] ------------------------------------------------------------------------ [INFO] [INFO] --- maven-enforcer-plugin:1.4:enforce (enforce-java) @ queue --- [INFO] [INFO] --- maven-remote-resources-plugin:1.5:process (default) @ queue --- [INFO] [INFO] --- maven-resources-plugin:2.6:resources (default-resources) @ queue --- [INFO] Using 'UTF-8' encoding to copy filtered resources. [INFO] Copying 1 resource [INFO] Copying 3 resources [INFO] [INFO] --- maven-compiler-plugin:3.1:compile (default-compile) @ queue --- [INFO] Changes detected - recompiling the module! [INFO] Compiling 1 source file to /work/apache-artemis-1.1.0/examples/features/standard/queue/target/classes [INFO] [INFO] --- maven-checkstyle-plugin:2.16:check (default) @ queue --- [INFO] [INFO] --- apache-rat-plugin:0.11:check (default) @ queue --- [INFO] RAT will not execute since it is configured to be skipped via system property 'rat.skip'. [INFO] [INFO] --- maven-resources-plugin:2.6:testResources (default-testResources) @ queue --- [INFO] Using 'UTF-8' encoding to copy filtered resources. [INFO] skip non existing resourceDirectory /work/apache-artemis-1.1.0/examples/features/standard/queue/src/test/resources [INFO] Copying 3 resources [INFO] [INFO] --- maven-compiler-plugin:3.1:testCompile (default-testCompile) @ queue --- [INFO] No sources to compile [INFO] [INFO] --- maven-surefire-plugin:2.18.1:test (default-test) @ queue --- [INFO] [INFO] --- maven-jar-plugin:2.4:jar (default-jar) @ queue --- [INFO] Building jar: /work/apache-artemis-1.1.0/examples/features/standard/queue/target/queue-1.1.0.jar [INFO] [INFO] --- maven-site-plugin:3.3:attach-descriptor (attach-descriptor) @ queue --- [INFO] [INFO] >>> maven-source-plugin:2.2.1:jar (attach-sources) > generate-sources @ queue >>> [INFO] [INFO] --- maven-enforcer-plugin:1.4:enforce (enforce-java) @ queue --- [INFO] [INFO] <<< maven-source-plugin:2.2.1:jar (attach-sources) < generate-sources @ queue <<< [INFO] [INFO] --- maven-source-plugin:2.2.1:jar (attach-sources) @ queue --- [INFO] Building jar: /work/apache-artemis-1.1.0/examples/features/standard/queue/target/queue-1.1.0-sources.jar [INFO] [INFO] >>> maven-source-plugin:2.2.1:jar (default) > generate-sources @ queue >>> [INFO] [INFO] --- maven-enforcer-plugin:1.4:enforce (enforce-java) @ queue --- [INFO] [INFO] <<< maven-source-plugin:2.2.1:jar (default) < generate-sources @ queue <<< [INFO] [INFO] --- maven-source-plugin:2.2.1:jar (default) @ queue --- [INFO] [INFO] --- artemis-maven-plugin:1.1.0:create (create) @ queue --- [INFO] Local id: local url: file:///Users/apacheuser/.m2/repository/ layout: default snapshots: [enabled => true, update => always] releases: [enabled => true, update => always] [INFO] Entries.size 2 [INFO] ... key=project = MavenProject: org.apache.activemq.examples.broker:queue:1.1.0 @ /work/apache-artemis-1.1.0/examples/features/standard/queue/pom.xml [INFO] ... key=pluginDescriptor = Component Descriptor: role: 'org.apache.maven.plugin.Mojo', implementation: 'org.apache.activemq.artemis.maven.ArtemisCLIPlugin', role hint: 'org.apache.activemq:artemis-maven-plugin:1.1.0:cli' role: 'org.apache.maven.plugin.Mojo', implementation: 'org.apache.activemq.artemis.maven.ArtemisCreatePlugin', role hint: 'org.apache.activemq:artemis-maven-plugin:1.1.0:create' role: 'org.apache.maven.plugin.Mojo', implementation: 'org.apache.activemq.artemis.maven.ArtemisClientPlugin', role hint: 'org.apache.activemq:artemis-maven-plugin:1.1.0:runClient' --- Executing org.apache.activemq.artemis.cli.commands.Create create --allow-anonymous --silent --force --no-web --user guest --password guest --role guest --port-offset 0 --data ./data --allow-anonymous --no-autotune --verbose /work/apache-artemis-1.1.0/examples/features/standard/queue/target/server0 Home::/work/apache-artemis-1.1.0/examples/features/standard/queue/../../../.., Instance::. Creating ActiveMQ Artemis instance at: /work/apache-artemis-1.1.0/examples/features/standard/queue/target/server0 You can now start the broker by executing: "/work/apache-artemis-1.1.0/examples/features/standard/queue/target/server0/bin/artemis" run Or you can run the broker in the background using: "/work/apache-artemis-1.1.0/examples/features/standard/queue/target/server0/bin/artemis-service" start [INFO] ################################################################################################### [INFO] create-server0.sh created with commands to reproduce server0 [INFO] under /work/apache-artemis-1.1.0/examples/features/standard/queue/target [INFO] ################################################################################################### [INFO] [INFO] --- artemis-maven-plugin:1.1.0:cli (start) @ queue --- [INFO] awaiting server to start [INFO] awaiting server to start server-out: _ _ _ server-out: / \ ____| |_ ___ __ __(_) _____ server-out: / _ \| _ \ __|/ _ \ \/ | |/ __/ server-out: / ___ \ | \/ |_/ __/ |\/| | |\___ \ server-out: /_/ \_\| \__\____|_| |_|_|/___ / server-out: Apache ActiveMQ Artemis 1.1.0 server-out: server-out: server-out:17:30:25,091 INFO [org.apache.activemq.artemis.integration.bootstrap] AMQ101000: Starting ActiveMQ Artemis Server server-out:17:30:25,120 INFO [org.apache.activemq.artemis.core.server] AMQ221000: live Message Broker is starting with configuration Broker Configuration (clustered=false,journalDirectory=./data/journal,bindingsDirectory=./data/bindings,largeMessagesDirectory=./data/large-messages,pagingDirectory=./data/paging) server-out:17:30:25,152 INFO [org.apache.activemq.artemis.core.server] AMQ221013: Using NIO Journal server-out:17:30:25,195 INFO [org.apache.activemq.artemis.core.server] AMQ221043: Protocol module found: [artemis-server]. Adding protocol support for: CORE server-out:17:30:25,199 INFO [org.apache.activemq.artemis.core.server] AMQ221043: Protocol module found: [artemis-amqp-protocol]. Adding protocol support for: AMQP server-out:17:30:25,209 INFO [org.apache.activemq.artemis.core.server] AMQ221043: Protocol module found: [artemis-hornetq-protocol]. Adding protocol support for: HORNETQ server-out:17:30:25,211 INFO [org.apache.activemq.artemis.core.server] AMQ221043: Protocol module found: [artemis-mqtt-protocol]. Adding protocol support for: MQTT server-out:17:30:25,214 INFO [org.apache.activemq.artemis.core.server] AMQ221043: Protocol module found: [artemis-openwire-protocol]. Adding protocol support for: OPENWIRE server-out:17:30:25,335 INFO [org.apache.activemq.artemis.core.server] AMQ221043: Protocol module found: [artemis-stomp-protocol]. Adding protocol support for: STOMP [INFO] awaiting server to start server-out:17:30:25,781 INFO [org.apache.activemq.artemis.core.server] AMQ221003: trying to deploy queue jms.queue.DLQ server-out:17:30:25,835 INFO [org.apache.activemq.artemis.core.server] AMQ221003: trying to deploy queue jms.queue.ExpiryQueue server-out:17:30:25,933 INFO [org.apache.activemq.artemis.core.server] AMQ221020: Started Acceptor at 0.0.0.0:61616 for protocols [CORE,MQTT,AMQP,HORNETQ,STOMP,OPENWIRE] server-out:17:30:25,936 INFO [org.apache.activemq.artemis.core.server] AMQ221020: Started Acceptor at 0.0.0.0:5445 for protocols [HORNETQ,STOMP] server-out:17:30:25,939 INFO [org.apache.activemq.artemis.core.server] AMQ221020: Started Acceptor at 0.0.0.0:5672 for protocols [AMQP] server-out:17:30:25,944 INFO [org.apache.activemq.artemis.core.server] AMQ221020: Started Acceptor at 0.0.0.0:1883 for protocols [MQTT] server-out:17:30:25,948 INFO [org.apache.activemq.artemis.core.server] AMQ221020: Started Acceptor at 0.0.0.0:61613 for protocols [STOMP] server-out:17:30:25,949 INFO [org.apache.activemq.artemis.core.server] AMQ221007: Server is now live server-out:17:30:25,949 INFO [org.apache.activemq.artemis.core.server] AMQ221001: Apache ActiveMQ Artemis Message Broker version 1.1.0 [nodeID=a855176b-50f0-11e5-937e-2fe9bb000966] [INFO] Server started [INFO] [INFO] --- artemis-maven-plugin:1.1.0:runClient (runClient) @ queue --- Sent message: This is a text message Received message: This is a text message [INFO] [INFO] --- artemis-maven-plugin:1.1.0:cli (stop) @ queue --- server-out:17:30:27,476 INFO [org.apache.activemq.artemis.core.server] AMQ221002: Apache ActiveMQ Artemis Message Broker version 1.0.1-SNA [INFO] ------------------------------------------------------------------------ [INFO] BUILD SUCCESS [INFO] ------------------------------------------------------------------------ [INFO] Total time: 7.840 s [INFO] Finished at: 2015-09-01T17:30:27-04:00 [INFO] Final Memory: 42M/508M [INFO] ------------------------------------------------------------------------ ``` List ==== This includes a preview list of a few examples that we distribute with Artemis. Please refer to the distribution for a more accurate list. Applet ------ This example shows you how to send and receive JMS messages from an Applet. Application-Layer Failover -------------------------- Apache ActiveMQ Artemis also supports Application-Layer failover, useful in the case that replication is not enabled on the server side. With Application-Layer failover, it's up to the application to register a JMS `ExceptionListener` with Apache ActiveMQ Artemis which will be called by Apache ActiveMQ Artemis in the event that connection failure is detected. The code in the `ExceptionListener` then recreates the JMS connection, session, etc on another node and the application can continue. Application-layer failover is an alternative approach to High Availability (HA). Application-layer failover differs from automatic failover in that some client side coding is required in order to implement this. Also, with Application-layer failover, since the old session object dies and a new one is created, any uncommitted work in the old session will be lost, and any unacknowledged messages might be redelivered. Core Bridge Example ------------------- The `bridge` example demonstrates a core bridge deployed on one server, which consumes messages from a local queue and forwards them to an address on a second server. Core bridges are used to create message flows between any two Apache ActiveMQ Artemis servers which are remotely separated. Core bridges are resilient and will cope with temporary connection failure allowing them to be an ideal choice for forwarding over unreliable connections, e.g. a WAN. Browser ------- The `browser` example shows you how to use a JMS `QueueBrowser` with Apache ActiveMQ Artemis. Queues are a standard part of JMS, please consult the JMS 2.0 specification for full details. A `QueueBrowser` is used to look at messages on the queue without removing them. It can scan the entire content of a queue or only messages matching a message selector. Client Kickoff -------------- The `client-kickoff` example shows how to terminate client connections given an IP address using the JMX management API. Client side failover listener ----------------------------- The `client-side-failoverlistener` example shows how to register a listener to monitor failover events Client-Side Load-Balancing -------------------------- The `client-side-load-balancing` example demonstrates how sessions created from a single JMS `Connection` can be created to different nodes of the cluster. In other words it demonstrates how Apache ActiveMQ Artemis does client-side load-balancing of sessions across the cluster. Clustered Durable Subscription ------------------------------ This example demonstrates a clustered JMS durable subscription Clustered Grouping ------------------ This is similar to the message grouping example except that it demonstrates it working over a cluster. Messages sent to different nodes with the same group id will be sent to the same node and the same consumer. Clustered Queue --------------- The `clustered-queue` example demonstrates a JMS queue deployed on two different nodes. The two nodes are configured to form a cluster. We then create a consumer for the queue on each node, and we create a producer on only one of the nodes. We then send some messages via the producer, and we verify that both consumers receive the sent messages in a round-robin fashion. Clustering with JGroups ----------------------- The `clustered-jgroups` example demonstrates how to form a two node cluster using JGroups as its underlying topology discovery technique, rather than the default UDP broadcasting. We then create a consumer for the queue on each node, and we create a producer on only one of the nodes. We then send some messages via the producer, and we verify that both consumers receive the sent messages in a round-robin fashion. Clustered Standalone -------------------- The `clustered-standalone` example demonstrates how to configure and starts 3 cluster nodes on the same machine to form a cluster. A subscriber for a JMS topic is created on each node, and we create a producer on only one of the nodes. We then send some messages via the producer, and we verify that the 3 subscribers receive all the sent messages. Clustered Static Discovery -------------------------- This example demonstrates how to configure a cluster using a list of connectors rather than UDP for discovery Clustered Static Cluster One Way -------------------------------- This example demonstrates how to set up a cluster where cluster connections are one way, i.e. server A -\> Server B -\> Server C Clustered Topic --------------- The `clustered-topic` example demonstrates a JMS topic deployed on two different nodes. The two nodes are configured to form a cluster. We then create a subscriber on the topic on each node, and we create a producer on only one of the nodes. We then send some messages via the producer, and we verify that both subscribers receive all the sent messages. Message Consumer Rate Limiting ------------------------------ With Apache ActiveMQ Artemis you can specify a maximum consume rate at which a JMS MessageConsumer will consume messages. This can be specified when creating or deploying the connection factory. If this value is specified then Apache ActiveMQ Artemis will ensure that messages are never consumed at a rate higher than the specified rate. This is a form of consumer throttling. Dead Letter ----------- The `dead-letter` example shows you how to define and deal with dead letter messages. Messages can be delivered unsuccessfully (e.g. if the transacted session used to consume them is rolled back). Such a message goes back to the JMS destination ready to be redelivered. However, this means it is possible for a message to be delivered again and again without any success and remain in the destination, clogging the system. To prevent this, messaging systems define dead letter messages: after a specified unsuccessful delivery attempts, the message is removed from the destination and put instead in a dead letter destination where they can be consumed for further investigation. Delayed Redelivery ------------------ The `delayed-redelivery` example demonstrates how Apache ActiveMQ Artemis can be configured to provide a delayed redelivery in the case a message needs to be redelivered. Delaying redelivery can often be useful in the case that clients regularly fail or roll-back. Without a delayed redelivery, the system can get into a "thrashing" state, with delivery being attempted, the client rolling back, and delivery being re-attempted in quick succession, using up valuable CPU and network resources. Divert ------ Apache ActiveMQ Artemis diverts allow messages to be transparently "diverted" or copied from one address to another with just some simple configuration defined on the server side. Durable Subscription -------------------- The `durable-subscription` example shows you how to use a durable subscription with Apache ActiveMQ Artemis. Durable subscriptions are a standard part of JMS, please consult the JMS 1.1 specification for full details. Unlike non-durable subscriptions, the key function of durable subscriptions is that the messages contained in them persist longer than the lifetime of the subscriber - i.e. they will accumulate messages sent to the topic even if there is no active subscriber on them. They will also survive server restarts or crashes. Note that for the messages to be persisted, the messages sent to them must be marked as durable messages. Embedded -------- The `embedded` example shows how to embed JMS within your own code using POJO instantiation and no config files. Embedded Simple --------------- The `embedded` example shows how to embed JMS within your own code using regular Apache ActiveMQ Artemis XML files. Message Expiration ------------------ The `expiry` example shows you how to define and deal with message expiration. Messages can be retained in the messaging system for a limited period of time before being removed. JMS specification states that clients should not receive messages that have been expired (but it does not guarantee this will not happen). Apache ActiveMQ Artemis can assign an expiry address to a given queue so that when messages are expired, they are removed from the queue and sent to the expiry address. These "expired" messages can later be consumed from the expiry address for further inspection. Apache ActiveMQ Artemis Resource Adapter example --------------------------------- This examples shows how to build the activemq resource adapters a rar for deployment in other Application Server's HTTP Transport -------------- The `http-transport` example shows you how to configure Apache ActiveMQ Artemis to use the HTTP protocol as its transport layer. Instantiate JMS Objects Directly -------------------------------- Usually, JMS Objects such as `ConnectionFactory`, `Queue` and `Topic` instances are looked up from JNDI before being used by the client code. This objects are called "administered objects" in JMS terminology. However, in some cases a JNDI server may not be available or desired. To come to the rescue Apache ActiveMQ Artemis also supports the direct instantiation of these administered objects on the client side so you don't have to use JNDI for JMS. Interceptor ----------- Apache ActiveMQ Artemis allows an application to use an interceptor to hook into the messaging system. Interceptors allow you to handle various message events in Apache ActiveMQ Artemis. JAAS ---- The `jaas` example shows you how to configure Apache ActiveMQ Artemis to use JAAS for security. Apache ActiveMQ Artemis can leverage JAAS to delegate user authentication and authorization to existing security infrastructure. JMS Auto Closable ----------------- The `jms-auto-closeable` example shows how JMS resources, such as connections, sessions and consumers, in JMS 2 can be automatically closed on error. JMS Completion Listener ----------------------- The `jms-completion-listener` example shows how to send a message asynchronously to Apache ActiveMQ Artemis and use a CompletionListener to be notified of the Broker receiving it. JMS Bridge ---------- The `jms-bridge` example shows how to setup a bridge between two standalone Apache ActiveMQ Artemis servers. JMS Context ----------- The `jms-context` example shows how to send and receive a message to a JMS Queue using Apache ActiveMQ Artemis by using a JMS Context. A JMSContext is part of JMS 2.0 and combines the JMS Connection and Session Objects into a simple Interface. JMS Shared Consumer ------------------- The `jms-shared-consumer` example shows you how can use shared consumers to share a subscription on a topic. In JMS 1.1 this was not allowed and so caused a scalability issue. In JMS 2 this restriction has been lifted so you can share the load across different threads and connections. JMX Management -------------- The `jmx` example shows how to manage Apache ActiveMQ Artemis using JMX. Large Message ------------- The `large-message` example shows you how to send and receive very large messages with Apache ActiveMQ Artemis. Apache ActiveMQ Artemis supports the sending and receiving of huge messages, much larger than can fit in available RAM on the client or server. Effectively the only limit to message size is the amount of disk space you have on the server. Large messages are persisted on the server so they can survive a server restart. In other words Apache ActiveMQ Artemis doesn't just do a simple socket stream from the sender to the consumer. Last-Value Queue ---------------- The `last-value-queue` example shows you how to define and deal with last-value queues. Last-value queues are special queues which discard any messages when a newer message with the same value for a well-defined last-value property is put in the queue. In other words, a last-value queue only retains the last value. A typical example for last-value queue is for stock prices, where you are only interested by the latest price for a particular stock. Management ---------- The `management` example shows how to manage Apache ActiveMQ Artemis using JMS Messages to invoke management operations on the server. Management Notification ----------------------- The `management-notification` example shows how to receive management notifications from Apache ActiveMQ Artemis using JMS messages. Apache ActiveMQ Artemis servers emit management notifications when events of interest occur (consumers are created or closed, addresses are created or deleted, security authentication fails, etc.). Message Counter --------------- The `message-counters` example shows you how to use message counters to obtain message information for a JMS queue. Message Group ------------- The `message-group` example shows you how to configure and use message groups with Apache ActiveMQ Artemis. Message groups allow you to pin messages so they are only consumed by a single consumer. Message groups are sets of messages that has the following characteristics: - Messages in a message group share the same group id, i.e. they have same JMSXGroupID string property values - The consumer that receives the first message of a group will receive all the messages that belongs to the group Message Group ------------- The `message-group2` example shows you how to configure and use message groups with Apache ActiveMQ Artemis via a connection factory. Message Priority ---------------- Message Priority can be used to influence the delivery order for messages. It can be retrieved by the message's standard header field 'JMSPriority' as defined in JMS specification version 1.1. The value is of type integer, ranging from 0 (the lowest) to 9 (the highest). When messages are being delivered, their priorities will effect their order of delivery. Messages of higher priorities will likely be delivered before those of lower priorities. Messages of equal priorities are delivered in the natural order of their arrival at their destinations. Please consult the JMS 1.1 specification for full details. Multiple Failover ----------------- This example demonstrates how to set up a live server with multiple backups Multiple Failover Failback -------------------------- This example demonstrates how to set up a live server with multiple backups but forcing failover back to the original live server No Consumer Buffering --------------------- By default, Apache ActiveMQ Artemis consumers buffer messages from the server in a client side buffer before you actually receive them on the client side. This improves performance since otherwise every time you called receive() or had processed the last message in a `MessageListener onMessage()` method, the Apache ActiveMQ Artemis client would have to go the server to request the next message, which would then get sent to the client side, if one was available. This would involve a network round trip for every message and reduce performance. Therefore, by default, Apache ActiveMQ Artemis pre-fetches messages into a buffer on each consumer. In some case buffering is not desirable, and Apache ActiveMQ Artemis allows it to be switched off. This example demonstrates that. Non-Transaction Failover With Server Data Replication ----------------------------------------------------- The `non-transaction-failover` example demonstrates two servers coupled as a live-backup pair for high availability (HA), and a client using a *non-transacted* JMS session failing over from live to backup when the live server is crashed. Apache ActiveMQ Artemis implements failover of client connections between live and backup servers. This is implemented by the replication of state between live and backup nodes. When replication is configured and a live node crashes, the client connections can carry and continue to send and consume messages. When non-transacted sessions are used, once and only once message delivery is not guaranteed and it is possible that some messages will be lost or delivered twice. OpenWire -------- The `Openwire` example shows how to configure an Apache ActiveMQ Artemis server to communicate with an Apache ActiveMQ Artemis JMS client that uses open-wire protocol. You will find the queue example for open wire, and the chat example. Paging ------ The `paging` example shows how Apache ActiveMQ Artemis can support huge queues even when the server is running in limited RAM. It does this by transparently *paging* messages to disk, and *depaging* them when they are required. Pre-Acknowledge --------------- Standard JMS supports three acknowledgement modes:` AUTO_ACKNOWLEDGE`, `CLIENT_ACKNOWLEDGE`, and `DUPS_OK_ACKNOWLEDGE`. For a full description on these modes please consult the JMS specification, or any JMS tutorial. All of these standard modes involve sending acknowledgements from the client to the server. However in some cases, you really don't mind losing messages in event of failure, so it would make sense to acknowledge the message on the server before delivering it to the client. This example demonstrates how Apache ActiveMQ Artemis allows this with an extra acknowledgement mode. Message Producer Rate Limiting ------------------------------ The `producer-rte-limit` example demonstrates how, with Apache ActiveMQ Artemis, you can specify a maximum send rate at which a JMS message producer will send messages. Queue ----- A simple example demonstrating a JMS queue. Message Redistribution ---------------------- The `queue-message-redistribution` example demonstrates message redistribution between queues with the same name deployed in different nodes of a cluster. Queue Requestor --------------- A simple example demonstrating a JMS queue requestor. Queue with Message Selector --------------------------- The `queue-selector` example shows you how to selectively consume messages using message selectors with queue consumers. Reattach Node example --------------------- The `Reattach Node` example shows how a client can try to reconnect to the same server instead of failing the connection immediately and notifying any user ExceptionListener objects. Apache ActiveMQ Artemis can be configured to automatically retry the connection, and reattach to the server when it becomes available again across the network. Replicated Failback example --------------------------- An example showing how failback works when using replication, In this example a live server will replicate all its Journal to a backup server as it updates it. When the live server crashes the backup takes over from the live server and the client reconnects and carries on from where it left off. Replicated Failback static example ---------------------------------- An example showing how failback works when using replication, but this time with static connectors Replicated multiple failover example ------------------------------------ An example showing how to configure multiple backups when using replication Replicated Failover transaction example --------------------------------------- An example showing how failover works with a transaction when using replication Request-Reply example --------------------- A simple example showing the JMS request-response pattern. Scheduled Message ----------------- The `scheduled-message` example shows you how to send a scheduled message to a JMS Queue with Apache ActiveMQ Artemis. Scheduled messages won't get delivered until a specified time in the future. Security -------- The `security` example shows you how configure and use role based queue security with Apache ActiveMQ Artemis. Send Acknowledgements --------------------- The `send-acknowledgements` example shows you how to use Apache ActiveMQ Artemis's advanced *asynchronous send acknowledgements* feature to obtain acknowledgement from the server that sends have been received and processed in a separate stream to the sent messages. Spring Integration ------------------ This example shows how to use embedded JMS using Apache ActiveMQ Artemis's Spring integration. SSL Transport ------------- The `ssl-enabled` shows you how to configure SSL with Apache ActiveMQ Artemis to send and receive message. Static Message Selector ----------------------- The `static-selector` example shows you how to configure an Apache ActiveMQ Artemis core queue with static message selectors (filters). Static Message Selector Using JMS --------------------------------- The `static-selector-jms` example shows you how to configure an Apache ActiveMQ Artemis queue with static message selectors (filters) using JMS. Stomp ----- The `stomp` example shows you how to configure an Apache ActiveMQ Artemis server to send and receive Stomp messages. Stomp1.1 -------- The `stomp` example shows you how to configure an Apache ActiveMQ Artemis server to send and receive Stomp messages via a Stomp 1.1 connection. Stomp1.2 -------- The `stomp` example shows you how to configure an Apache ActiveMQ Artemis server to send and receive Stomp messages via a Stomp 1.2 connection. Stomp Over Web Sockets ---------------------- The `stomp-websockets` example shows you how to configure an Apache ActiveMQ Artemis server to send and receive Stomp messages directly from Web browsers (provided they support Web Sockets). Symmetric Cluster ----------------- The `symmetric-cluster` example demonstrates a symmetric cluster set-up with Apache ActiveMQ Artemis. Apache ActiveMQ Artemis has extremely flexible clustering which allows you to set-up servers in many different topologies. The most common topology that you'll perhaps be familiar with if you are used to application server clustering is a symmetric cluster. With a symmetric cluster, the cluster is homogeneous, i.e. each node is configured the same as every other node, and every node is connected to every other node in the cluster. Temporary Queue --------------- A simple example demonstrating how to use a JMS temporary queue. Topic ----- A simple example demonstrating a JMS topic. Topic Hierarchy --------------- Apache ActiveMQ Artemis supports topic hierarchies. With a topic hierarchy you can register a subscriber with a wild-card and that subscriber will receive any messages sent to an address that matches the wild card. Topic Selector 1 ---------------- The `topic-selector-example1` example shows you how to send message to a JMS Topic, and subscribe them using selectors with Apache ActiveMQ Artemis. Topic Selector 2 ---------------- The `topic-selector-example2` example shows you how to selectively consume messages using message selectors with topic consumers. Transaction Failover -------------------- The `transaction-failover` example demonstrates two servers coupled as a live-backup pair for high availability (HA), and a client using a transacted JMS session failing over from live to backup when the live server is crashed. Apache ActiveMQ Artemis implements failover of client connections between live and backup servers. This is implemented by the sharing of a journal between the servers. When a live node crashes, the client connections can carry and continue to send and consume messages. When transacted sessions are used, once and only once message delivery is guaranteed. Failover Without Transactions ----------------------------- The `stop-server-failover` example demonstrates failover of the JMS connection from one node to another when the live server crashes using a JMS non-transacted session. Transactional Session --------------------- The `transactional` example shows you how to use a transactional Session with Apache ActiveMQ Artemis. XA Heuristic ------------ The `xa-heuristic` example shows you how to make an XA heuristic decision through Apache ActiveMQ Artemis Management Interface. A heuristic decision is a unilateral decision to commit or rollback an XA transaction branch after it has been prepared. XA Receive ---------- The `xa-receive` example shows you how message receiving behaves in an XA transaction in Apache ActiveMQ Artemis. XA Send ------- The `xa-send` example shows you how message sending behaves in an XA transaction in Apache ActiveMQ Artemis.