activemq-artemis/examples/jms/xa-heuristic
Clebert Suconic b3af4bb777 ARTEMIS-178 Refactor examples to use CLI
This is changing the examples to run the real servers.
The maven plugin should be an automation of the CLI
Where we run real servers instead of any embedded framework

Going forward we will need to remove the common examples.
Failover examples will be able to use Process Builders
2015-07-29 16:00:41 -05:00
..
src/main ARTEMIS-178 Refactor examples to use CLI 2015-07-29 16:00:41 -05:00
pom.xml ARTEMIS-178 Refactor examples to use CLI 2015-07-29 16:00:41 -05:00
readme.html Ensure all references to the project use ActiveMQ Artemis 2015-05-13 11:51:26 +01:00

readme.html

<!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements.  See the NOTICE file
distributed with this work for additional information
regarding copyright ownership.  The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License.  You may obtain a copy of the License at

  http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied.  See the License for the
specific language governing permissions and limitations
under the License.
-->

<html>
  <head>
    <title>ActiveMQ Artemis JMS XA Heuristic Example</title>
    <link rel="stylesheet" type="text/css" href="../common/common.css" />
    <link rel="stylesheet" type="text/css" href="../common/prettify.css" />
    <script type="text/javascript" src="../common/prettify.js"></script>
  </head>
  <body onload="prettyPrint()">
     <h1>JMS XA Heuristic Example</h1>
     <p>This example shows you how to make an XA heuristic decision through the ActiveMQ Artemis Management Interface.</p>
     
     <p>A heuristic decision is a unilateral decision to commit or rollback an XA transaction branch after it has 
     been prepared. </p>
     
     <p>In this example we simulate a transaction manager to control the transactions. First we create an XASession
     and enlist it in a transaction through its XAResource. We then send a text message, 'hello' and end/prepare the transaction
     on the XAResource, but neither commit nor roll back the transaction. Another transaction is created and
     associated with the same XAResource, and a second message, 'world' is sent on behalf of the second transaction. Again we leave
     the second transaction in prepare state. 
     Then we get the MBeanServerConnection object to manipulate the prepared transactions. To illustrate, we roll back the first 
     transaction but commit the second. This will result in that only the message 'world' is received. </p>

     <p>This example uses JMX to manipulate transactions in a ActiveMQ Artemis Server. For details on JMX facilities with ActiveMQ Artemis,
     please look at the JMX Example.</p>
     
     <h2>Example step-by-step</h2>
     <p><i>To run the example, simply type <code>mvn verify -Pexample</code> from this directory</i></p>
     <ol>
        <li>First we need to get an initial context so we can look-up the JMS connection factory and destination objects from JNDI. This initial context will get it's properties from the <code>client-jndi.properties</code> file in the directory <code>../common/config</code></li>
        <pre class="prettyprint">
           <code>InitialContext initialContext = getContext(0);</code>
        </pre>

        <li>We look-up the JMS queue object from JNDI</li>
        <pre class="prettyprint">
           <code>Queue queue = (Queue) initialContext.lookup("/queue/exampleQueue");</code>
        </pre>

        <li>We perform a lookup on the XA Connection Factory</li>
        <pre class="prettyprint">
           <code>XAConnectionFactory cf = (XAConnectionFactory) initialContext.lookup("/XAConnectionFactory");</code>
        </pre>

        <li>We create a JMS XAConnection</li>
        <pre class="prettyprint">
           <code>connection = cf.createXAConnection();</code>
        </pre>

        <li>We Start the connection</li>
        <pre class="prettyprint">
           <code>connection.start();</code>
        </pre>

        <li>We create a JMS XASession</li>
        <pre class="prettyprint">
          <code>XASession xaSession = connection.createXASession();</code>
       </pre>

        <li>We create a normal session</li>
        <pre class="prettyprint">
          <code>Session normalSession = connection.createSession(false, Session.AUTO_ACKNOWLEDGE);</code>
       </pre>

        <li>We create a normal Message Consumer</li>
        <pre class="prettyprint">
           <code>
           MessageConsumer normalConsumer = normalSession.createConsumer(queue);
           normalConsumer.setMessageListener(new SimpleMessageListener());
           </code>
       </pre>

        <li>We get the JMS Session</li>
        <pre class="prettyprint">
          <code>Session session = xaSession.getSession();</code>
       </pre>

        <li>We create a message producer</li>
        <pre class="prettyprint">
          <code>MessageProducer producer = session.createProducer(queue); </code>
       </pre>

        <li>We create two Text Messages</li>
        <pre class="prettyprint">
          <code>
          TextMessage helloMessage = session.createTextMessage("hello");
          TextMessage worldMessage = session.createTextMessage("world");
          </code>
       </pre>

        <li>We create a transaction</li>
        <pre class="prettyprint">
          <code>Xid xid1 = new XidImpl("xa-example1".getBytes(), 1, UUIDGenerator.getInstance().generateStringUUID().getBytes());</code>
       </pre>

        <li>We get the JMS XAResource</li>
        <pre class="prettyprint">
          <code>XAResource xaRes = xaSession.getXAResource();</code>
       </pre>

        <li>We begin the Transaction work</li>
        <pre class="prettyprint">
          <code>xaRes.start(xid1, XAResource.TMNOFLAGS);</code>
       </pre>

        <li>We do work, sending hello message.</li>
        <pre class="prettyprint">
          <code>
          normalProducer.send(helloMessage);
          </code>
       </pre>

        <li>We stop the work for xid1</li>
        <pre class="prettyprint">
          <code>xaRes.end(xid1, XAResource.TMSUCCESS);</code>
       </pre>

        <li>We prepare xid1</li>
        <pre class="prettyprint">
          <code>xaRes.prepare(xid1);</code>
       </pre>

        <li>We check the none should be received.</li>
        <pre class="prettyprint">
          <code>checkNoMessageReceived();</code>
       </pre>

        <li>We create another transaction </li>
        <pre class="prettyprint">
          <code>Xid xid2 = new XidImpl("xa-example2".getBytes(), 1, UUIDGenerator.getInstance().generateStringUUID().getBytes());</code>
       </pre>

        <li>We begin the transaction work</li>
        <pre class="prettyprint">
          <code>xaRes.start(xid2, XAResource.TMNOFLAGS);</code>
       </pre>

        <li>We send the second message</li>
        <pre class="prettyprint">
           <code>producer.send(worldMessage);</code>
       </pre>

        <li>We stop the work for xid2</li>
        <pre class="prettyprint">
          <code>xaRes.end(xid2, XAResource.TMSUCCESS);</code>
       </pre>

        <li>We prepare xid2</li>
        <pre class="prettyprint">
          <code>xaRes.prepare(xid2);</code>
       </pre>

       <li>Again, no messages should be received!</li>
       <pre class="prettyprint">
          <code>checkNoMessageReceived();</code>
       </pre>

        <li>We create JMX Connector to connect to the server's MBeanServer.</li>
        <pre class="prettyprint">
          <code>
          JMXConnector connector = JMXConnectorFactory.connect(new JMXServiceURL(JMX_URL), new HashMap<String, String>());
          </code>
       </pre>

        <li>We retrieve the MBeanServerConnection</li>
        <pre class="prettyprint">
          <code>MBeanServerConnection mbsc = connector.getMBeanServerConnection();</code>
       </pre>

        <li>We list the prepared transactions</li>
        <pre class="prettyprint">
          <code>
          ObjectName serverObject = ObjectNameBuilder.DEFAULT.getMessagingServerObjectName();
          String[] infos = (String[])mbsc.invoke(serverObject, "listPreparedTransactions", null, null);
         
          System.out.println("Prepared transactions: ");
          for (String i : infos)
          {
             System.out.println(i);
          }
          </code>
       </pre>

        <li>We roll back the first transaction</li>
        <pre class="prettyprint">
          <code>mbsc.invoke(serverObject, "rollbackPreparedTransaction", new String[] {XidImpl.toBase64String(xid1)}, new String[]{"java.lang.String"});</code>
       </pre>

        <li>We commit the second one</li>
        <pre class="prettyprint">
          <code>mbsc.invoke(serverObject, "commitPreparedTransaction", new String[] {XidImpl.toBase64String(xid2)}, new String[]{"java.lang.String"});</code>
       </pre>

        <li>We check the result, only the 'world' message received</li>
        <pre class="prettyprint">
          <code>checkMessageReceived("world");</code>
       </pre>

        <li>We check the prepared transaction again, should have none.</li>
        <pre class="prettyprint">
          <code>
          infos = (String[])mbsc.invoke(serverObject, "listPreparedTransactions", null, null);
          System.out.println("No. of prepared transactions now: " + infos.length);
          </code>
       </pre>

        <li>We close the JMX connector.</li>
        <pre class="prettyprint">
          <code>connector.close();</code>
       </pre>
       
        <li>And finally, <b>always</b> remember to close your JMS connections and resources after use, in a <code>finally</code> block. Closing a JMS connection will automatically close all of its sessions, consumers, producer and browser objects</li>

        <pre class="prettyprint">
           <code>finally
           {
              if (initialContext != null)
              {
                initialContext.close();
              }
              if (connection != null)
              {
                 connection.close();
              }
           }</code>
        </pre>
     </ol>
  </body>
</html>