7f86825337
NO-JIRA - Adding activemq-junit dependency to activemq-unit-tests
2016-04-13 13:21:48 +00:00
4ecff14030
NO-JIRA Update master version to 5.14.0-SNAPSHOT to match the eventual
...
release version.
2016-01-20 12:40:20 -05:00
cfb4ca9f54
[maven-release-plugin] prepare for next development iteration
2015-11-30 13:48:58 +00:00
abfe038ddf
[maven-release-plugin] prepare release activemq-5.13.0
2015-11-30 13:48:11 +00:00
64aac4ce73
org.apache.activemq.network.VirtualConsumerDemandTest can take more than 10mins - increasing the fork limit
2015-11-18 16:08:29 +00:00
cc81680e10
https://issues.apache.org/jira/browse/AMQ-6027
...
Adding support for consumers on virtual destinations to create network
demand. This behavior is turned off by default but can be enabled.
For example, if a consumer comes online for a queue that is part of a
VirtualTopic, this will cause a network of brokers to forward messages
because a demand subscription will be created. Same for if a consumer
comes online for a forwarded destination from a composite
destination.
There is also an option to enable flow based on the existence of a
virtual destination if the virtual destination is forwarding to a
Queue.
Full configuration instructions for this feature will be on the wiki page.
2015-11-09 20:07:43 +00:00
04ee70a161
https://issues.apache.org/jira/browse/AMQ-5889
...
Adding support for auto detection of wire protocols over a transport.
OpenWire, AMQP, STOMP, and MQTT can all be detected and the broker
will properly handle each one over a given Transport. Currently
auto TCP, NIO, SSL, and NIO+SSL transports can handle auto-detection
of the wire format and client but support could be added in the
future for other transports like websockets.
2015-08-11 19:39:29 +00:00
6cdd750ddc
[maven-release-plugin] prepare for next development iteration
2015-08-10 11:04:26 -04:00
a9eeb03520
[maven-release-plugin] prepare release activemq-5.12.0
2015-08-10 11:04:17 -04:00
a05a9a2129
https://issues.apache.org/jira/browse/AMQ-5552 - added profile for activemq.tests=smoke to run a fast subset of tests that gives a fast verification of a full build
2015-07-09 14:10:38 +01:00
428fc82c8c
AMQ5266Test can take 8mins locally - exclude from quick tests
2015-06-17 15:04:29 +01:00
c89bb7a316
fix intermittent failure of FailoverStaticNetworkTest. Bridge fails to start triggerStartAsyncNetworkBridgeCreation thread waiting on localBrokerInfo. The command was dropped due to contention between dispatch and peer start. Fix and test. Relates to https://issues.apache.org/jira/browse/AMQ-3684
2015-05-12 22:10:57 +01:00
b8698953f3
https://issues.apache.org/jira/browse/AMQ-5744 - jasypt-spring31
2015-04-24 11:56:26 +02:00
3051882f92
https://issues.apache.org/jira/browse/AMQ-5606
...
Switch to the new QPid JMS client v0.1.0
2015-03-23 12:15:49 -04:00
58ed95d7c8
AMQ-5636 - Update DBCP to a much more recent version
2015-03-05 08:36:26 -07:00
84c1419c3d
https://issues.apache.org/jira/browse/AMQ-5621
...
Add the ability to toggle the default value of the ManagementContext
createConnector variable and set it to false for the surefire runs of
the unit tests, this should resolve failures of tests for no other
reason than a previous test failed to shutdown its broker. Also speeds
up tests as they don't need to create this resource in order to use the
MBeans.
2015-02-27 14:59:31 -05:00
3155c625c6
https://issues.apache.org/jira/browse/AMQ-5567 - fix and test - issue was eager dispatch with concurrent sends, recovery and outcome delivery now assign a new sequence id to message additions which sorts sequence order in the xa case
2015-02-06 12:56:29 +00:00
ae595c95b1
[maven-release-plugin] prepare for next development iteration
2015-01-30 12:46:19 +00:00
4ba1a1689f
[maven-release-plugin] prepare release activemq-5.11.0
2015-01-30 12:46:08 +00:00
bf5a2997c7
[maven-release-plugin] prepare for next development iteration
2015-01-26 16:48:46 +00:00
eec2955bde
[maven-release-plugin] prepare release activemq-5.11.0
2015-01-26 16:48:37 +00:00
64fa706d54
Revert "[maven-release-plugin] prepare release activemq-5.11.0"
...
This reverts commit f47fbe4b89
2015-01-26 16:39:35 +00:00
f47fbe4b89
[maven-release-plugin] prepare release activemq-5.11.0
2015-01-26 16:17:43 +00:00
f38cb588d3
allow multicast to work via perfer ip4 and more sensible delays
2015-01-23 13:08:03 +00:00
cf62d58ae7
https://issues.apache.org/jira/browse/AMQ-5515 - tidy up jetty deps - fix jetty maven coords
2015-01-12 22:58:07 +00:00
aedcae139b
Revert "[maven-release-plugin] prepare release activemq-5.11.0"
...
This reverts commit 48b0cf396c
2015-01-05 12:25:58 -05:00
89995f4723
Revert "[maven-release-plugin] prepare for next development iteration"
...
This reverts commit 7b285c6f52
2015-01-05 12:25:47 -05:00
7b285c6f52
[maven-release-plugin] prepare for next development iteration
2014-12-29 12:44:32 +01:00
48b0cf396c
[maven-release-plugin] prepare release activemq-5.11.0
2014-12-29 12:44:20 +01:00
9c2b1d2572
https://issues.apache.org/jira/browse/AMQ-5266 https://issues.apache.org/jira/browse/AMQ-4485 - store has messages must be aware of pending also kahadb setBatch for async sends. additional tests and tidy up of cusror sync with store to reflect async/sync additions
2014-10-16 23:35:18 +01:00
140ce1bc8f
https://issues.apache.org/jira/browse/AMQ-4485 - reenable test. concurrentStoreandDispatch case cannot be reconciled via setBatch, best we can do is trap duplicates from inflight messages as they occur. tagged async stores to support this. the revert of serialization with tx and non aysnc send brings perf back to where it was. https://issues.apache.org/jira/browse/AMQ-5266
2014-10-07 14:50:41 +01:00
023b0f1987
https://issues.apache.org/jira/browse/AMQ-4485 - test case hangs on 1.7, subsequent tests fail with port in use - disabling pending some investigation
2014-09-23 16:17:31 +01:00
60bc089531
use plugin version to avoid mvn warn
2014-07-25 11:48:20 +01:00
0ebbd5d974
https://issues.apache.org/jira/browse/AMQ-4000 - fix is good enable test so we can close the issue
2014-07-21 13:43:08 +01:00
13581c9aac
Exclude leveldb tests on AIX, Solaris, HP-UX, and Windows as they cause problems with CI
2014-07-10 11:10:11 +02:00
785faa06be
disable autofail system.exit - it kills a surefire forked test run
2014-06-09 12:32:32 +01:00
fa086396a7
[maven-release-plugin] prepare for next development iteration
2014-06-05 11:59:29 +02:00
58dd93e42e
[maven-release-plugin] prepare release activemq-5.10.0
2014-06-05 11:59:17 +02:00
c2cf78542f
[maven-release-plugin] prepare for next development iteration
2014-06-04 11:33:17 +02:00
5bc741f227
[maven-release-plugin] prepare release activemq-5.10.0
2014-06-04 11:33:03 +02:00
a20c3a07a2
https://issues.apache.org/jira/browse/AMQ-5175
...
Substitute a working bouncy castle lib for needed by some of the ldap
tests. This one works on newer JDK 1.7 releases
2014-05-06 16:58:31 -04:00
810ce35f55
https://issues.apache.org/jira/browse/AMQ-5175
...
Exclude the BouncyCastle jar from the tests.
2014-05-06 13:38:53 -04:00
c34f8426ab
Exclude failing activemq-unit-tests to re-enable CI
2014-03-05 11:21:51 -05:00
c027552035
Upgraded surefire plugin to 2.16. AMQ-5006
2014-01-30 14:22:44 +01:00
092bc61708
avoid jvm fork console popup on osx
2013-10-22 15:23:32 +01:00
864aa6798f
[maven-release-plugin] prepare for next development iteration
2013-10-14 23:38:35 +01:00
87c9bbebac
[maven-release-plugin] prepare release activemq-5.9.0
2013-10-14 23:38:22 +01:00
ee0933c71e
[maven-release-plugin] prepare for next development iteration
2013-10-11 14:51:36 +01:00
b276006911
[maven-release-plugin] prepare release activemq-5.9.0
2013-10-11 14:51:24 +01:00
21edf2b5bb
Implementing AMQ-4788 - make sure you can configure the partition broker plugin via activemq.xml
2013-10-07 13:19:42 -04:00
Christopher L. Shannon (cshannon)
Timothy Bish
gtully
Dejan Bosanac
Jeff Genender
Hadrian Zbarcea
Kevin Earls
Timothy Bish
Hiram Chirino