Timothy Bish
5702ec8d7c
https://issues.apache.org/jira/browse/AMQ-6438
...
Add additional test for larger more complex AMQP message
2016-09-26 17:19:42 -04:00
Timothy Bish
d4c7cce7d7
https://issues.apache.org/jira/browse/AMQ-6438
...
Makes some improvements to the profiling test for the transformers.
2016-09-21 18:18:41 -04:00
Clebert Suconic
35e8a52888
NO-JIRA: Adding an extra test on AmqpTransactionTest
...
The test I'm adding was back ported from Artemis.
It will validate if the ACKs are nacked in case of a connection.close();
To avoid a situation where the TX would sit on a Transaction Resource Manager somewhere like an XID.
2016-09-21 16:13:57 -04:00
gtully
6c01b641b1
https://issues.apache.org/jira/browse/AMQ-6422 - move delivery tracking to pumpoutbound and additional test that shows how the presettle case breaks. Thanks to Robbie Gemmell for the feedback
2016-09-21 13:59:45 +01:00
gtully
ffee8b442f
https://issues.apache.org/jira/browse/AMQ-6422 - match proton sender view credit to prefetchExtension - tracking credit to dispatch delta to track additional flow requests. Proton sender layer is distinct from the transport layer - they mirror each other
2016-09-21 10:33:20 +01:00
Timothy Bish
5d53aa2d11
NO-JIRA: Add some more variants of the .NET transaction tests
...
Adds ability to not settle accepted messages on the client to enable
creation of tests that are equivalent to the AmqpNetLite client's
transaction tests which hold settlement and expect the resource to
handle it on successful discharge.
2016-09-19 17:36:58 -04:00
Timothy Bish
a35d23dff7
NO-JIRA: Small test client fix to close threads out faster.
2016-09-15 16:28:16 -04:00
Timothy Bish
4516c8df3f
NO-JIRA: Add some additional tests ported from the .NET AMQP client
...
Adds some transaction tests ported from AMQP .NET client with some
variances based on the way the test client works and limitations in the
brokers handling of Transacted sends.
2016-09-15 13:26:06 -04:00
Timothy Bish
b4ab0e1af9
NO-JIRA AMQP Test updates
...
Adds support for doing sends and receives that are enrolled in a
transaction created in a session other than the session that created the
sender or receiver. Adds some tests that show this in action.
2016-09-14 18:23:52 -04:00
Timothy Bish
da9fedead4
https://issues.apache.org/jira/browse/AMQ-6422
...
Adds a split consumer test that uses presettled receivers.
2016-09-09 18:34:03 -04:00
Timothy Bish
2fdc2600ac
https://issues.apache.org/jira/browse/AMQ-6422
...
Small fix to test and check for zero inflight on successive send to
destination that should have no credit on the registered receiver.
2016-09-09 13:02:04 -04:00
Timothy Bish
640289868e
https://issues.apache.org/jira/browse/AMQ-6422
...
Add test for credit grants but no settles for a single receiver.
2016-09-09 12:52:48 -04:00
Timothy Bish
84cd815500
Allow the AMQP test client to also be configure to trace frames
...
The test client can allow for quick tracing of the frame traffic via a
call to setTraceFrames on the client or connection instance before
connection to the remote. This allows for tests to easily switch on /
off tracing. The log4j.properties is also updated to output frame
tracing with the URI option is put on the AMQP transport or the client
value is enabled.
2016-09-08 16:19:37 -04:00
Timothy Bish
0050f22b97
Add a test case for anonymous sender links using simple test client.
2016-09-07 17:27:31 -04:00
Timothy Bish
ee271afe90
https://issues.apache.org/jira/browse/AMQ-6422
...
I've made a few minor test changes and added a couple more cases. Under
heavy CPU load I'm able to get test,
testReceiveMessageAndRefillCreditBeforeAcceptOnQueue to fail on the
second receive call where it should get the second message since it
granted credit.
2016-09-07 14:05:21 -04:00
gtully
88daeec28f
AMQ-6422 - include the inflight count in the prefetch for positive remote credit flows. Fix and test
2016-09-07 17:28:35 +01:00
Christopher L. Shannon (cshannon)
98c5866c75
https://issues.apache.org/jira/browse/AMQ-6418
...
Properly setting the transport properties on the
AutoNIOSSLTransportServer and fixing the Stomp protocol to set the peer
certs when using auto+ssl
2016-09-06 10:17:05 -04:00
Christopher L. Shannon (cshannon)
ed0e786b60
https://issues.apache.org/jira/browse/AMQ-6414
...
Changing the nio+ssl transports to trigger a serviceRead after start up
to prevent blocking. The prevents the channels from not reading in
certain cases, most notably with the auto+nio+ssl transport when used
for a network bridge. Also added a couple tests and changed a network
bridge test to test out auto+nio+ssl.
2016-09-01 11:39:46 -04:00
Timothy Bish
4a1f2f7ca7
https://issues.apache.org/jira/browse/AMQ-6410
...
Advertise that the connection supported delayed message delivery.
2016-08-30 15:00:23 -04:00
Timothy Bish
1030fb1842
https://issues.apache.org/jira/browse/AMQ-6404
...
Add check for unmarshalled text body and handle that case.
2016-08-23 09:58:05 -04:00
Timothy Bish
5e5b673afa
https://issues.apache.org/jira/browse/AMQ-6386
...
Add test to help diagnose the issue with cross protocol AMQP -> STOMP
message acking.
2016-08-05 12:04:51 -04:00
Christopher L. Shannon (cshannon)
06a21dbbb3
[maven-release-plugin] prepare for next development iteration
2016-08-02 09:03:37 -04:00
Christopher L. Shannon (cshannon)
71cbc65283
[maven-release-plugin] prepare release activemq-5.14.0
2016-08-02 09:02:54 -04:00
Timothy Bish
d54e21b2ff
https://issues.apache.org/jira/browse/AMQ-6374
...
Refactor transformer to better map AMQP messages to JMS message types
and better preserve the original encoding of stored messages so that
they can be sent back to an AMQP client with expected content types.
Adds additional interoperability tests.
2016-07-25 18:15:53 -04:00
Timothy Bish
4b018b4206
https://issues.apache.org/jira/browse/AMQ-6339
...
Clean up the transport implementation and reduce duplication.
2016-07-18 16:54:37 -04:00
Timothy Bish
a35e8dc8a2
https://issues.apache.org/jira/browse/AMQ-6359
...
Allow a receiver link to enable consumer options on the subscription
such as exclusive and retroactive using options encoded on the address
2016-07-14 16:08:34 -04:00
Timothy Bish
16c487a7b9
https://issues.apache.org/jira/browse/AMQ-6353
...
Fix and test for encoding the correlation Id value to the ActiveMQ
message object's string value
2016-07-12 14:19:01 -04:00
Timothy Bish
c9c05eb866
NO-JIRA Update this test to test across all transformers.
2016-07-12 10:57:07 -04:00
Timothy Bish
31c55f7510
https://issues.apache.org/jira/browse/AMQ-6339
...
Add support for AMQP client to connect using WebSockets.
2016-06-30 14:52:40 -04:00
Timothy Bish
83827f2770
https://issues.apache.org/jira/browse/AMQ-6341
...
Wait on broker response for async broker commands.
2016-06-29 20:13:34 -04:00
Timothy Bish
4e23adfcc9
https://issues.apache.org/jira/browse/AMQ-6340
...
combine the lists in the correct order for later redispatch.
2016-06-29 12:57:30 -04:00
Timothy Bish
e02c1a17f8
https://issues.apache.org/jira/browse/AMQ-6286
...
Create a follow on test showing AMQP respects order.
2016-06-24 09:39:48 -04:00
Timothy Bish
d563e9019d
Test for message property handling cross protocols.
...
Add a test that validates that message properties are propagated between
OpenWire and AMQP.
2016-06-22 18:05:39 -04:00
Timothy Bish
94ca7039b1
Add a rollback test that rolls back repeatedly using new connections.
2016-06-22 13:02:14 -04:00
Timothy Bish
a95d6fd4eb
Adds a start of message interoperability test for OpenWire <-> Qpid JMS
2016-06-21 13:01:19 -04:00
Timothy Bish
27d955501f
Add some additional tests for dynamic sender / receiver links
2016-06-16 15:59:56 -04:00
Timothy Bish
f595f3c20d
Handle the case where the remote doesn't set any properties resulting in
...
a null instance being returned from the properties getter.
2016-06-15 18:55:13 -04:00
Timothy Bish
dbed28e625
https://issues.apache.org/jira/browse/AMQ-6320
...
Turn off support for non SASL connections by default, can be enabled on
the TransportConnector URI if needed.
2016-06-10 17:55:28 -04:00
Timothy Bish
c5998444cf
https://issues.apache.org/jira/browse/AMQ-6319
...
Additional fixes and tests for disable of non-SASL client connects.
2016-06-10 17:11:44 -04:00
Timothy Bish
534dbee447
NO-JIRA: Add test to show behavior of non-prefixed addresses that
...
default to Queue.
2016-06-10 09:50:59 -04:00
Timothy Bish
c49db029ab
https://issues.apache.org/jira/browse/AMQ-6319
...
Improve configuration for disabling non-SASL connections.
2016-06-09 17:32:41 -04:00
Timothy Bish
28e7cb0b21
https://issues.apache.org/jira/browse/AMQ-6309
...
Fix some minor issues shown by static code analysis
2016-06-03 18:05:40 -04:00
Timothy Bish
db71b43b19
https://issues.apache.org/jira/browse/AMQ-6305
...
Lower prefetch on settlement of allow for dispatch of the full amount of
granted credit. Adds additional tests.
2016-06-03 17:05:00 -04:00
Timothy Bish
76b70545f2
https://issues.apache.org/jira/browse/AMQ-6304
...
Ensure that the broker send a container ID using its assigned Broker
name value.
2016-06-01 18:38:41 -04:00
Timothy Bish
8448cf1cb8
https://issues.apache.org/jira/browse/AMQ-6305
...
Refactor credit handling and drain state tracking to ensure we stay in
sync with the remote state and always answer drain requests. Start
adding some more tests around drain to the interop suite.
2016-06-01 18:30:31 -04:00
Timothy Bish
6ae169e275
https://issues.apache.org/jira/browse/AMQ-6305
...
Add test and supporting enhancements to the JUnit module to allow for
easy repetition of tests that don't always fail reliably
2016-05-26 18:02:59 -04:00
Timothy Bish
08f266d762
Remove unused import.
2016-05-26 16:52:18 -04:00
Timothy Bish
4d6f4d7475
https://issues.apache.org/jira/browse/AMQ-6263
...
Encode the incoming messageId value into a string using type prefixes
and decode them on the way out to ensure that we preserve the original
AMQP MessageId type and value.
2016-04-26 18:08:11 -04:00
Timothy Bish
98165c4b69
https://issues.apache.org/jira/browse/AMQ-6228
...
Create a better error message that for the invalid frame size error.
2016-03-31 16:52:34 -04:00
Timothy Bish
f6d25842cc
NO-JIRA Adds some small fixes to the AMQP test client around SSL
...
handling that were found in Qpid JMS where some of this came from.
2016-02-29 16:13:28 -05:00
Timothy Bish
bbb17da52f
https://issues.apache.org/jira/browse/AMQ-6147
...
Add a test that can reproduce an issue seen when emitFlowOnSend is
disabled on the proton transport to allow for further investigation.
2016-02-18 16:07:59 -05:00
Timothy Bish
33e27a4f5a
NO-JIRA: Add some additional assertions so tests fail more cleanly in
...
the case of a receive not getting a message before it's assigned
timeout.
2016-02-17 11:34:25 -05:00
Robert Gemmell
3f7b2d6bb0
AMQ-6147: update to proton-j 0.12.0 release
2016-02-16 17:21:12 +00:00
Timothy Bish
4ecff14030
NO-JIRA Update master version to 5.14.0-SNAPSHOT to match the eventual
...
release version.
2016-01-20 12:40:20 -05:00
Timothy Bish
19ea5515c8
https://issues.apache.org/jira/browse/AMQ-6107
...
Remove the deprecated setPrefetch option
2015-12-22 16:16:23 -05:00
Christopher L. Shannon (cshannon)
cfb4ca9f54
[maven-release-plugin] prepare for next development iteration
2015-11-30 13:48:58 +00:00
Christopher L. Shannon (cshannon)
abfe038ddf
[maven-release-plugin] prepare release activemq-5.13.0
2015-11-30 13:48:11 +00:00
Timothy Bish
d9e22a9368
https://issues.apache.org/jira/browse/AMQ-6044
...
Clean up some test client code.
2015-11-23 16:55:11 -05:00
Timothy Bish
272fb2b973
https://issues.apache.org/jira/browse/AMQ-6044
...
Add support for transactions to the test client.
2015-11-20 17:48:14 -05:00
Timothy Bish
b5dd0a16f4
https://issues.apache.org/jira/browse/AMQ-6055
...
Account for Authzid in SASL PLAIN mechanism and provide a means to fail
the authorization if the challenge response is invalid. Update the
client to properly exclude sasl mechanism that don't apply to it's
configured credentials such as using only ANONYMOUS when no user or
password is set.
2015-11-20 14:39:03 -05:00
Robert Gemmell
d7e4c6d96f
AMQ-6055: fix for earlier change to plain response encoding
2015-11-20 18:19:27 +00:00
Robert Gemmell
ce5628a389
AMQ-6055: uptest test client and add [currently-ignored] test to demonstrate the issue
2015-11-20 17:55:41 +00:00
Timothy Bish
5d353e241b
https://issues.apache.org/jira/browse/AMQ-6037
...
Add support for amqp style variants of the ActiveMQ job scheduler
options set in message annotations.
2015-11-10 18:12:40 -05:00
Timothy Bish
480b3e7c36
https://issues.apache.org/jira/browse/AMQ-6037
...
Add support for the delivery time header to allow for scheduled messages
at a desired time.
2015-11-09 12:00:38 -05:00
Timothy Bish
a42be999cb
NO-JIRA Fix test with commented out assertion.
2015-11-06 16:15:37 -05:00
Timothy Bish
82a5839fc7
NO-JIRA Update test client to have no real linkage to the activemq
...
internals to make it easier to share the tests with Artemis.
2015-11-04 12:47:57 -05:00
Robert Gemmell
037f91d61e
AMQ-6031: use System.nanoTime() when deriving time to tick the transport with for idle-timeout handling
2015-10-30 16:28:53 +00:00
Timothy Bish
7c06d8d683
NO-JIRA Allow validation points to use asserts, adds a new test in idle
...
test.
2015-10-22 10:55:33 -04:00
Timothy Bish
490436c136
https://issues.apache.org/jira/browse/AMQ-6015
...
Add support for returning some more meaningful error codes.
2015-10-19 15:49:47 -04:00
Timothy Bish
5c5ced8e87
NO-JIRA enable test that was ingored for the old amqp-1.0 JMS client,
...
now works with QPid JMS.
2015-10-16 12:23:28 -04:00
Timothy Bish
e8a0d042d8
NO-JIRA - Fix some warnings from unused imports and use of deprecated
...
methods.
2015-10-14 12:51:02 -04:00
Timothy Bish
80b526be7d
https://issues.apache.org/jira/browse/AMQ-6010
...
Fix for failed SSL connections not releasing the connection count in the
transport which leads to connections being rejected as having eceeded
the maximum configured connections.
2015-10-14 11:39:24 -04:00
Timothy Bish
bbcd938032
https://issues.apache.org/jira/browse/AMQ-6001
...
Refill credit at a slightly faster rate.
2015-10-06 11:33:35 -04:00
Timothy Bish
81b4b9ae3d
https://issues.apache.org/jira/browse/AMQ-5996
...
When possible check for noLocl changes on durable subscription
reactivation and recreate the durable sub if it changes. For both
selector change and noLocal change also update the AbstractSubscription
selectorExpression so it matches with what was requested.
2015-10-01 19:23:58 -04:00
Robert Gemmell
049f8da236
AMQ-5891: update to the proton 0.10 release
2015-08-14 15:17:19 +01:00
Christopher L. Shannon (cshannon)
e14aca871c
https://issues.apache.org/jira/browse/AMQ-5889
...
-Cleaned up missing license headers and refactored packages.
-Added configuration options for a protocol detection timeout and
for the max number of connections accepted at the same time.
-Fixed a regression with connection counts
-Also added some more tests
2015-08-13 14:41:29 +00:00
Christopher L. Shannon (cshannon)
04ee70a161
https://issues.apache.org/jira/browse/AMQ-5889
...
Adding support for auto detection of wire protocols over a transport.
OpenWire, AMQP, STOMP, and MQTT can all be detected and the broker
will properly handle each one over a given Transport. Currently
auto TCP, NIO, SSL, and NIO+SSL transports can handle auto-detection
of the wire format and client but support could be added in the
future for other transports like websockets.
2015-08-11 19:39:29 +00:00
Timothy Bish
6cdd750ddc
[maven-release-plugin] prepare for next development iteration
2015-08-10 11:04:26 -04:00
Timothy Bish
a9eeb03520
[maven-release-plugin] prepare release activemq-5.12.0
2015-08-10 11:04:17 -04:00
Robert Gemmell
0cfd225912
AMQ-5890: prevent NPE if Modified disposition is applied without the delivery-failed flag set, add some general tests of Modified handling
...
https://issues.apache.org/jira/browse/AMQ-5890
2015-07-16 12:46:24 +01:00
gtully
a05a9a2129
https://issues.apache.org/jira/browse/AMQ-5552 - added profile for activemq.tests=smoke to run a fast subset of tests that gives a fast verification of a full build
2015-07-09 14:10:38 +01:00
Timothy Bish
13044decce
https://issues.apache.org/jira/browse/AMQ-5848
...
Use the latest openwire version marshallers in the KahaDB store when
starting from a clean install, drop back to the version used in the
existing store if one is found.
2015-07-08 17:29:32 -04:00
Timothy Bish
cd32c60f39
https://issues.apache.org/jira/browse/AMQ-5850
...
Use JMS Transformer by default for inter-protocol interoperability.
2015-06-18 15:00:12 -04:00
Timothy Bish
833d30837b
https://issues.apache.org/jira/browse/AMQ-5848
...
Introduce OpenWire v11 which adds noLocal to the SubscriptionInfo, if
configured KahaDB can store that version and the noLocal value is
recovered from the store.
2015-06-18 14:25:07 -04:00
Timothy Bish
ed266835b5
https://issues.apache.org/jira/browse/AMQ-5847
...
Add workarounds to allow for TX work to take place in multiple sessions
on the same connection. Future work needed to properly support TXN
Capabilities defined in the spec and support checking of violations of
expected behavior.
2015-06-16 16:41:18 -04:00
Timothy Bish
c2310391b9
https://issues.apache.org/jira/browse/AMQ-5845
...
provide server information in connection properties.
2015-06-15 18:38:12 -04:00
Timothy Bish
732fd56840
https://issues.apache.org/jira/browse/AMQ-5839
...
Disable failing test, broker doesn't currently recover the noLocal state
for a durable subscription.
2015-06-12 16:43:34 -04:00
Timothy Bish
4945c83d70
https://issues.apache.org/jira/browse/AMQ-5839
...
Use correct name for the no-local filter
2015-06-12 16:11:55 -04:00
Timothy Bish
d74c087134
Add a negative validation test.
2015-06-12 15:39:17 -04:00
Timothy Bish
d723d14acb
Add some additional control over what is configured on the running
...
broker.
2015-06-12 14:26:55 -04:00
Timothy Bish
11da37b991
https://issues.apache.org/jira/browse/AMQ-5828
...
Fixed bad default for message persistence that breaks AMQP specification
defined behavior when the durable value is not present in the Header.
2015-06-05 11:21:27 -04:00
Timothy Bish
f37b005acf
https://issues.apache.org/jira/browse/AMQ-5776
...
Add better support for maxFrameSize configuration that fits with the
defaults configuration for the broker by allowing the maxFrameSize to be
configured via ?wireFormat.maxFrameSize on STOMP, AMQP, and MQTT.
Previously we only supported transport.wireFormat.maxFrameSize.
2015-06-02 15:25:11 -04:00
Robert Gemmell
138e52b08c
AMQ-5801: add error condition hint via the info map to signal the container-id was the invalid field
2015-05-27 18:09:45 +01:00
Timothy Bish
5e7b70f11f
https://issues.apache.org/jira/browse/AMQ-5413
...
ensure drain completion clear currently tracked credit value, next flow
should update to the correct value.
2015-05-27 11:30:29 -04:00
Timothy Bish
17bcf43048
https://issues.apache.org/jira/browse/AMQ-5799
...
Resolve a compilation error.
2015-05-27 06:10:08 -04:00
Timothy Bish
ffcd99ac85
https://issues.apache.org/jira/browse/AMQ-5799
...
Add unit test for case of JMS AMQP client changing properties on a
durable sub when resubscribing, not working with current version.
fix: Use existing filters map to avoind creating a new instance.
2015-05-26 18:28:28 -04:00
Timothy Bish
b5c6264789
https://issues.apache.org/jira/browse/AMQ-5799
...
Return the noLocal filter and set selector if one exists for the
existing durable subscription when a lookup is requested.
2015-05-26 17:30:54 -04:00
Timothy Bish
3125caee5b
https://issues.apache.org/jira/browse/AMQ-5794
...
implement transport.connectAttemptTimeout option across the transports
fro OpenWire, STOMP, AMQP and MQTT and add tests to cover.
2015-05-26 12:29:23 -04:00
Timothy Bish
13b915ad19
https://issues.apache.org/jira/browse/AMQ-5795
...
Allow fallback of message transformers when configured one can't handle
the incoming message.
2015-05-22 18:57:42 -04:00
Timothy Bish
f05ff94e5c
https://issues.apache.org/jira/browse/AMQ-4900
...
Strip delivery annotations from the incoming messages when using JMS
transformer, the other transformers don't currently have a way to do
this.
2015-05-20 14:54:13 -04:00