gtully
d7b5a62bb0
https://issues.apache.org/jira/browse/AMQ-6286 - variant on test with n consumers sharing a session
2016-05-13 15:50:13 +01:00
gtully
3c0a4d960e
unit test to verify matching durable sub can statically forward topic
2016-05-12 22:11:25 +01:00
Timothy Bish
71893f1434
Allow the HTTP test to have extra time to wait for all messages to
...
arrive as the transmission rate is much slower.
2016-05-10 10:59:12 -04:00
Timothy Bish
3da9b0720e
https://issues.apache.org/jira/browse/AMQ-5621
...
Remove hard coded port as the bridge brokers method doesn't need the
port to be fixed. Turn off JMX since the test doesn't use it.
2016-05-10 10:05:05 -04:00
Timothy Bish
809d5b9bc8
https://issues.apache.org/jira/browse/AMQ-5621
...
Clean up, remove sleep and some unused code.
2016-05-10 09:56:19 -04:00
gtully
604f707d4d
https://issues.apache.org/jira/browse/AMQ-6286 - refactor insertAtHead from pendinglist to ordered variant
2016-05-10 11:45:27 +01:00
gtully
f47b370573
https://issues.apache.org/jira/browse/AMQ-6286 extend strictOrderDispatch to retain order of redispatched messages for a single consumer
2016-05-09 23:06:19 +01:00
gtully
1a8e17fbc3
tidy up test
2016-05-09 12:51:28 +01:00
gtully
9fc2661049
validate selector aware vt can give topic semantics by dropping messages when there is no consumer. Do selector cache plugin once to avoid adaptor check on each dispatch
2016-05-06 17:12:15 +01:00
gtully
1de7e7e8a3
tackle ci intermittent failure - think with prefetch extension it is not guarenteed that second consumer will get a dispatch
2016-05-06 13:54:12 +01:00
gtully
fc9ad9f023
tackle intermittent ci failure, think possibe all messages are dispatched before pause
2016-05-06 12:17:07 +01:00
gtully
9a35c3731b
fix ci failure when less than 4% disk space
2016-05-06 12:10:26 +01:00
Quinn Stevenson
1ccd17791b
AMQ-6274 - set originalDestination for composite destinations
...
This closes #184
2016-05-05 11:38:48 -04:00
gtully
65cef69130
https://issues.apache.org/jira/browse/AMQ-5603 - reverting default preallocatonScope to entire_journal b/c async only really works for ssd
2016-05-05 13:06:42 +01:00
Timothy Bish
a28a091c55
https://issues.apache.org/jira/browse/AMQ-6264
...
Fire advisory for slow consumer outside the pending lock.
2016-05-04 16:32:01 -04:00
Timothy Bish
d1e2b76809
https://issues.apache.org/jira/browse/AMQ-5621
...
Update tests to not use hard coded broker port.
2016-05-04 14:39:38 -04:00
gtully
231679d936
https://issues.apache.org/jira/browse/AMQ-5603 - don't async preallocate to keep match data file count
2016-05-04 16:15:55 +01:00
gtully
ba77b9f55a
https://issues.apache.org/jira/browse/AMQ-6277 - tidy up logic that determines recovery location so that we don't recovery from the end of the journal in error on normal restart. This avoids suprious recovery logging
2016-05-03 12:47:49 +01:00
gtully
4f43a21212
https://issues.apache.org/jira/browse/AMQ-5603 - one more journal in the mix for this test with async preallocation
2016-05-03 11:36:47 +01:00
gtully
62bdbb0db5
https://issues.apache.org/jira/browse/AMQ-5603 - add preallocationScope=full_journal_async that will preallocate a journal in advance or use to avoid latency jitter on journal rotation. Added none option to disable preallocation
2016-04-29 16:57:28 +01:00
Timothy Bish
3c342ffce4
Add some additional checks for valid state.
2016-04-27 14:50:43 -04:00
Christopher L. Shannon (cshannon)
297eadf746
https://issues.apache.org/jira/browse/AMQ-6267
...
Added two new properties for configuration to a network bridge,
advisoryPrefetchSize and advisoryAckPercentage. By default
advisoryPrefetchSize is set to 0, which is disabled, and will use the
prefetchSize value unless otherwise set. Also added validation to
prefetchSize to make sure it is greater than 0 as 0 is not allowed.
2016-04-27 14:11:05 +00:00
Timothy Bish
765a010d04
https://issues.apache.org/jira/browse/AMQ-5621
...
Add sleep back which allows the producers to wait for the bridge
formation.
2016-04-25 18:41:00 -04:00
Timothy Bish
10478c313e
https://issues.apache.org/jira/browse/AMQ-5621
...
Update tests to not use hardcoded port for the transport connector and
remove the unneeded sleep calls with proper test setup
2016-04-20 15:16:36 -04:00
Timothy Bish
8a30026e82
Drop back to original iterations now and give some extra time on test
...
timeouts.
2016-04-19 12:54:18 -04:00
Timothy Bish
b027e65553
https://issues.apache.org/jira/browse/AMQ-5153
...
https://issues.apache.org/jira/browse/AMQ-6254
Store the original subscribed destination along with the target
destination in the subscription info object to ensure that wildcard
subscriptions remain linked.
2016-04-19 09:53:58 -04:00
gtully
6541bef52d
fix logger name
2016-04-18 15:05:31 +01:00
Christopher L. Shannon (cshannon)
b9f9f03829
https://issues.apache.org/jira/browse/AMQ-6256
...
Calling beforeMarshall on messages when they async stored before the
store task is run and before consumer dispatch to prevent two threads
from trying to mutate the message state at the same time.
2016-04-15 13:01:21 +00:00
Timothy Bish
19fd084a83
https://issues.apache.org/jira/browse/AMQ-6252
...
Update for some added thread safety. Adds method healthStatus that will
regenrate the status from the healthList data which is more intuitive
than the getCurrentStatus which doesn't update state and requires
periodic calls to healthList to capture current metrics.
2016-04-14 16:53:17 -04:00
gtully
530c1a8193
https://issues.apache.org/jira/browse/AMQ-6240 - tidy up test and reduce duration. reuse closeTimeout on rollback during close which is the case here
2016-04-14 12:25:11 +01:00
Timothy Bish
82330793e9
https://issues.apache.org/jira/browse/AMQ-5621
...
Clean up the test, use timeouts and add a few more iterations to try and
reproduce recent CI failures from this test.
2016-04-13 15:17:14 -04:00
Brian D. Johnson
7a61718e02
https://issues.apache.org/jira/browse/AMQ-6244 - reset ActiveMQBytesMessage 'compressed' flag after restoring compressed content
2016-04-13 14:19:06 +00:00
Christopher L. Shannon (cshannon)
7f86825337
NO-JIRA - Adding activemq-junit dependency to activemq-unit-tests
2016-04-13 13:21:48 +00:00
gtully
77d46dc139
https://issues.apache.org/jira/browse/AMQ-6240 use sendTimout on sync rollback on close such that a blocked connection won't block a close
2016-04-13 11:55:59 +01:00
Christopher L. Shannon (cshannon)
5ec4513ffb
https://issues.apache.org/jira/browse/AMQ-5923
...
Adding missing assertion statements
2016-04-12 15:52:26 +00:00
Timothy Bish
c1b58d3373
https://issues.apache.org/jira/browse/AMQ-6239
...
Refactor the iterator implementation in the PrioritizedPendingList to
not copy elements and instead use the level iterators. Add some
additional tests.
2016-04-12 11:35:03 -04:00
Christopher L. Shannon (cshannon)
485fcafcdf
https://issues.apache.org/jira/browse/AMQ-5923
...
Updating tests to check prioritized messages as well
2016-04-12 14:13:52 +00:00
gtully
2a8218a9a8
https://issues.apache.org/jira/browse/AMQ-6151 - retain list for redeliveries and combine for dispatch/iteration such that redeliveries retain per priority order after prefetch
2016-04-06 15:09:36 +01:00
gtully
a3a8c1c525
https://issues.apache.org/jira/browse/AMQ-6215 - support 0 maxBrowsePageSize and maxExpirePageSize such that lazyDispatch ensures highest priority messages is available to a pull consumer
2016-04-05 13:23:06 +01:00
Timothy Bish
0fb24cc4c1
Allow some extra time on the consumer wait to account for slow CI boxes
2016-03-30 14:23:33 -04:00
Christopher L. Shannon (cshannon)
75990ef14a
https://issues.apache.org/jira/browse/AMQ-6222
...
Moving clearedMarshalledState execution to the async listener on an
async add to the message store. This is necessary to make sure this
logic doens't execute until after the message is marshalled for the
store.
2016-03-22 17:54:13 +00:00
Timothy Bish
a9521dcebf
https://issues.apache.org/jira/browse/AMQ-6203
...
Expose configuration on the persistence adapter level.
Double the test timeout and increase the compaction frequency to account
for very slow CI boxes.
2016-03-15 12:02:40 -04:00
Timothy Bish
946e62d702
https://issues.apache.org/jira/browse/AMQ-6203
...
Rewrite older acks that can be preventing GC of log files.
2016-03-14 11:04:57 -04:00
gtully
ae441cbc7d
https://issues.apache.org/jira/browse/AMQ-6208 - fix and test
2016-03-11 12:01:18 +00:00
gtully
521c4fd8c3
extend timeout - running too close to the limit for comfort
2016-03-09 22:13:46 +00:00
Christopher L. Shannon (cshannon)
a2781e3966
https://issues.apache.org/jira/browse/AMQ-6204
...
Fixing the removal logic on virtual destination remove inside of
Advisory Broker to clean up virtual destination maps properly. Added a
test to verify. Also added new debug logging to help track down any
future issues.
2016-03-09 19:54:08 +00:00
gtully
078f39f589
https://issues.apache.org/jira/browse/AMQ-6199 - apply CursorMemoryHighWaterMark to topic subscriptions
2016-03-08 16:45:06 +00:00
gtully
e313f40989
https://issues.apache.org/jira/browse/AMQ-6175 - fix unit test regression SelectiveMBeanRegistrationTest
2016-03-08 11:55:46 +00:00
gtully
13ec994939
Revert " https://issues.apache.org/jira/browse/AMQ-4495 - revisit. Reinstate check for space on pagein, so that highWaterMark is respected and full state is not reached, hense pfc is not triggered in error"
...
This reverts commit d8cf54b0a9
.
2016-03-07 16:26:25 +00:00
Christopher L. Shannon (cshannon)
903dec615c
https://issues.apache.org/jira/browse/AMQ-6194
...
Fixing an issue that caused statistics for a transactional temporary
queue to be updated twice by mistake. Moved the statistics update into
tryOrderedCursorAdd so that the update is called immediately only if
not inside a transaction.
2016-03-07 14:15:35 +00:00