commons-math/doc/release/release.howto.txt

#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

This document is meant as a step-by-step recipe to achieve the release of
the Commons Math component. Note that more general instructions valid
for all components, including [math], are available on the Apache Commons
main site: at "http://commons.apache.org/releases/prepare.html" and
"http://commons.apache.org/releases/release.html".

The files "settings-security.xml" and "settings.xml" are minimal examples
of files used by maven to pick up authentication credentials needed to
connect to remote servers and to cryptographically sign the artifacts.

Since [math] has switched to git as its version control system, release preparation
can be done easily on the release manager local host in a branch. We will use a
temporary branch for all release candidates, and delete it afterwards, so the branch
will be simply named release-candidates. The branch will only be used to store the
release specific parts (i.e. the pom changes with the version number, the release date
in the site and so on). Everything else and in particular code change that will remain
in the component after the release must be committed to the master branch. The release
candidate branch will be synchronized with master at the start of each new candidate for
this particular release. Once the release is done, the branch will be merged back to
master and deleted. Of course, this will not delete the history, only the name
release-candidates pointing to the head of this branch will disappear and can be reused
for next version.

The example below show a typical workflow. Just after commit A in the master branch, the
release-candidate branch is created starting from master. This is shown by the 'b' in the
second line. Then release candidate specific commits are made on the pom and a few other
files, leading to a commit which will be tagged as RC1. This release candidate fails, and
a few corrections need to be made on master, corresponding to commits B and C. Then the
release candidate branch is synchronized by running a 'git merge' command on the branch.
This is shown by the 'm' in the second line. A new commit is tagged as RC2. This second
release candidate also fails, and a new correction is made on master branch, a new merge
is done on the release branch, a new commit is tagged and a third release candidate is
create, which succeeds. Then a final tag will be added on the final commit of this branch
showing the status as released. Then the files are cleaned to prepare for next version
(pom getting again a SNAPSHOT suffix, changes.xml getting a new placeholder for changes)
and the cleaned branch is merged back to master. Once the branch has been merged, it is not
useful anymore so it is deleted, hence the name release-candidate can be used again for
the release branch of the next version.


 ----A-------> B --> C----------> D--------------------------------------m---->    <- master branch
      \               \            \                                    /
       b---> RC1 ------m---> RC2 ---m---> RC3/final release --> cleaning --X       <- release-candidates branch

This process allows:

 - to never commit release candidate specific changes to the master
   branch (so the pom on master always holds a SNAPSHOT version),
 - to preserve future reference to the release
 - to allow parallel work on master during the release
 - if necessary to have multiple release managers or help on the
   release as the release-candidates branch is shared
 - to abort a release by deleting the branch early if some
   larger change is needed on master


(0)
Preliminary checks:
 * All Java files must contain a license header. The "RAT" maven plugin will
   generate a report indicating for which files the license is missing.
 * For a "minor" release, the library must be backward-compatible. Check all
   the errors reported by the "Clirr" plugin.
 * Clear all "CheckStyle" warnings.
 * Make sure that the construct reported by "FindBugs" are intentional.
 * Mark all fixed issues as such in the bug-tracking system, and add a
   corresponding entry in "src/changes/changes.xml".


(1)
As a first optional step, you can test that everything works locally, i.e.
that the build process can create all the necessary artifacts. The command

  $ mvn clean deploy -Prelease -Ptest-deploy

should create the artifacts in the "target/deploy".


(2)
At this point, you will work mainly on the release-candidates branch.

If the release-candidates branch does not exist because it is the first release
candidate, create it locally starting from the master branch and push it to
Apache repository (assuming it is called origin), remembering the binding
between the local and remote origin branches:

  $ git branch release-candidates
  $ git push -u origin release-candidates

(3)
Switch to the release candidate branch:

  $ git checkout release-candidates


(4)
If there have been changes committed in the master branch since the creation of
the release candidate branch, there are two cases:

  (4a)
  if all these changes must be included in the release-candidate,
  merge master branch into release-candidates branch:

  $ git merge master

  (4b)
  if only part of these changes must be included in the release-candidate,
  cherry-pick the required commits into release-candidates branch:

  $ git cherry-pick commit-SHA

(5)
Update the release specific files, checking you are really working on the
release-candidate branch and *not* on the master branch.

In particular:
 * Update and commit the "src/site/site.xml" file to contain the information
   about the API docs of the new release.
 * Estimate a release date (taking into account the release vote delay) and
   insert it in the "src/changes/changes.xml" file.
 * Update the "pom.xml" to contain the final version number and not a SNAPSHOT:
   Assuming that the release version will be "3.4", modify the "<version>" tag to
   read:

    <version>3.4</version>

   Modify the section of "<properties>" that also refers to version numbers.
   You should uncomment the "<commons.rc.version>" line and indicate the
   appropriate numbering of the release candidate: This refers to how many
   times you will need to repeat this whole release process until it is
   accepted (by a vote):

  <properties>
    <!-- ... -->
    <commons.release.version>3.4</commons.release.version>
    <commons.rc.version>RC1</commons.rc.version>
    <!-- ... -->
  </properties>


(6)
The "download" page template is located at "src/site/xdoc/download_math.xml".
This file is updated automatically by running the command:

  $ mvn commons:download-page


(7)
The "release notes" file will be created by gathering all the changes
collected during development in the file "src/changes/changes.xml".
Create it by running:

  $ mvn -Prelease-notes changes:announcement-generate

Check the file for weird line breaks, and commit the updated file to git:

  $ git add src/site/site.xml \
            src/changes/changes.xml \
            pom.xml \
            src/site/xdoc/download_math.xml \
            RELEASE-NOTES.txt

Check you did not forget any file:

  $ git status

Commit the changes:
  $ git commit -m "creating release candidate"


(8)
Create a GPG signed tag that will contain the whole source of this release candidate.
First, make sure once again that the workspace is up-to-date:

  $ git status

Then, assuming the first candidate, the suffix will be "RC1" (this should
be the  same as in the "<properties>" in the "pom.xml"), and the command
will be:

  $ git tag -s -m "Creating Apache Commons Math v3.4 RC1 tag." MATH_3_4_RC1

If you have several GPG keys, you may prefer to use "-u keyId" to select a specific
key for signing the tag instead of "-s" which select automatically one key
from the configured e-mail address.

Check the tag GPG signature:

  $ git tag -v MATH_3_4_RC1

You will get something like:

  object cf4a9d70c9ac24dd7196995390171150e4e56451
  type commit
  tag MATH_3_4_RC1
  tagger Luc Maisonobe <luc@apache.org> 1418934614 +0100

  Creating Apache Commons Math v3.4 RC1 tag.
  gpg: Signature made Thu Dec 18 21:30:14 2014 CET using RSA key ID 02E9F65B
  gpg: Good signature from "Luc Maisonobe (CODE SIGNING KEY) <luc@apache.org>"
  gpg:                 aka "Luc Maisonobe <Luc.Maisonobe@c-s.fr>"
  gpg:                 aka "Luc Maisonobe <Luc.Maisonobe@free.fr>"
  gpg:                 aka "Luc Maisonobe <luc@orekit.org>"

Remember the commit ID listed in the object line (here cf4a9d70c9ac24dd7196995390171150e4e56451),
as it is the most stable reference for traceability.

Push everything (including the tag!) on the Apache repository:

  $ git push --tags

(9)
Switch to a new directory out of your regular workspace, and retrieve
the official tag from the Apache repository:

  $ cd /tmp
  $ git clone https://git-wip-us.apache.org/repos/asf/commons-math.git --branch MATH_3_4_RC1

In the command above, the --branch option accepts both branch names and tags names,
so we specify directly the tag here. Git will warn that the resulting workspace
is in 'detached HEAD' state and 'git status' commands will warn that you are not
currently on any branch. This is expected is this situation.

Check that the last commit has the id you noted in the previous step:

  $ git log -1

(10)
If this is your first release, you might need to add your GPG encryption
key to the KEYS file. [If you have already done so, skip this section.]

Retrieve the files from the SVN repository:

  $ svn co --depth=immediates \
    https://__Your_apache_login__@svn.apache.org/repos/asf/commons/trunks-proper

and follow the instructions at the top of the "KEYS" file.


(11)
Create and transfer the artifacts to the Nexus server (a.k.a. "deploy").

Because the artifacts must be cryptographically signed, this step requires that
a profile named "release" exists in the maven "settings.xml" configuration file
which will contain the identifier of your GPG key (cf. sample "settings.xml" 
file).

You can then run

  $ mvn clean deploy -Prelease

which will transfer the artifacts to the Nexus repository located at
  https://repository.apache.org/index.html#stagingRepositories

This process transfers more files than really needed in the the "staging" (i.e.
non official) maven repository. The files expected in the repository are
commons-math3-3.4.pom, commons-math3-3.4.jar, commons-math3-3.4.javadoc,
commons-math3-3.4.sources, commons-math3-3.4.test-sources commons-math3-3.4.tests,
the associated fingerprints (<file-name>.md5 and <file-name>.sha1) and the signatures
<file-name>.asc. Note that Nexus automatically adds "md5" and "sha1" checksums files
to the "asc" files (cryptographic signature). These fingerprints on signatures are
spurious and have to be manually removed from Nexus staging area. The process also
transfers the complete source and binaries distributions files
commons-math3-3.4.-bin.tar.gz, commons-math3-3.4.-bin.zip, commons-math3-3.4.-src.tar.gz,
commons-math3-3.4.-src.zip as well as the associated .md5 and .sha1 fingerprints and the
.asc signatures. These are not really maven artifacts but rather distribution archives,
and they belong elsewhere, so they must also been removed from the Nexus staging
repository.

As a measure of sanity check,  repository must be manually "closed" before other
people review the deliverables just created.
How to "close" the staging repository is explained at this page:
  http://books.sonatype.com/nexus-book/reference/staging-repositories.html#staging-sect-closing

(12)
Upload the other distribution files to the Apache servers.

The archive files have been created during the previous step. They have been put
in the .m2 local repository. The RELEASE_NOTES.txt file hase been created earlier
and is still in the checkout directory of the release candidate. All these files
can be uploaded to the development area of the Apache dist server using the
following commands:

 $ cd /tmp
 $ svn checkout https://dist.apache.org/repos/dist/dev/commons/math
 $ cd math
 $ cp ~/.m2/repository/org/apache/commons/commons-math3/3.4*-bin.* binaries
 $ cp ~/.m2/repository/org/apache/commons/commons-math3/3.4*-src.* source
 $ cp <path-to-the-RC-workspace>/RELEASE-NOTES.txt .
 $ svn add RELEASE-NOTES.txt binaries/* source/*
 $ svn commit -m "Creating distribution files for 3.4 RC1"


(13)
As the web site staging area is shared among all commons components and therefore
can be published before vote ends, it is not recommended to use the standard staging
area for the release candidate. So you will just archive the site and transfer it on
your apache personal area for review:

  $ mvn site
  $ cd target
  $ tar cvf site.tar.gz site
  $ scp site.tar.gz __Your_apache_login__@people.apache.org:~/
  $ ssh __Your_apache_login__@people.apache.org
     you@minotaur:~$ tar xzf site.tar.gz
     you@minotaur:~$ mv site public-html/commons-math-3.4-RC1-site
     you@minotaur:~$ rm site.tar.gz
     you@minotaur:~$ logout

(14)
Call to vote by sending a message to the "dev" ML with subject
"[VOTE][RC1] Release Commons Math 3.4". You can use the following example as
a starting point, replacing the URLs with the appropriate ones:
----------
This is a [VOTE] for releasing Apache Commons Math 3.4 from release candidate 1.

Tag (and how to check its GPG signature):
  git clone https://git-wip-us.apache.org/repos/asf/commons-math.git --branch MATH_3_4_RC1
  cd commons-math
  git tag -v MATH_3_4_RC1

Commit ID the tag points at:
  cf4a9d70c9ac24dd7196995390171150e4e56451

Site:
  http://people.apache.org/~__Your_apache_login__/commons-math-3.4-RC1-site

Distribution files:
  https://dist.apache.org/repos/dist/dev/commons/math/

Maven artifacts:
  https://repository.apache.org/content/repositories/orgapachecommons-051/org/apache/commons/commons-math3/3.4/

[ ] +1 Release it.
[ ] +0 Go ahead; I don't care.
[ ] -0 There are a few minor glitches: ...
[ ] -1 No, do not release it because ...

This vote will close in 72 hours, at YYYY-MM-DDThh:mm:ssZ (this is UTC
time).
----------


(15)
If some blocking problems have been found in the release deliverables, cancel
the vote by sending a "[CANCEL][VOTE]" message to the "dev" ML.
After correcting the problems, you'll likely have to start again from step 3,
4 or 5.


(16)
After at least 72 hours have elapsed, send a "[VOTE][RESULT]" mail to
summarize the outcome of the vote. This should tally the votes cast,
and state which are binding (PMC members).


(17)
The distribution files must be moved from the development area to the release
area of the Apache dist server:

$ svnmucc -U https://dist.apache.org/repos/dist \
          mv dev/commons/math/RELEASE-NOTES.txt release/commons/math/RELEASE-NOTES.txt \
          mv dev/commons/math/binaries/commons-math-3.4-bin.tar.gz release/commons/math/binaries/commons-math-3.4-bin.tar.gz \
          mv dev/commons/math/binaries/commons-math-3.4-bin.tar.gz.asc release/commons/math/binaries/commons-math-3.4-bin.tar.gz.asc \
          mv dev/commons/math/binaries/commons-math-3.4-bin.tar.gz.md5 release/commons/math/binaries/commons-math-3.4-bin.tar.gz.md5 \
          mv dev/commons/math/binaries/commons-math-3.4-bin.tar.gz.sha1 release/commons/math/binaries/commons-math-3.4-bin.tar.gz.sha1 \
          mv dev/commons/math/binaries/commons-math-3.4-bin.zip release/commons/math/binaries/commons-math-3.4-bin.zip \
          mv dev/commons/math/binaries/commons-math-3.4-bin.zip.asc release/commons/math/binaries/commons-math-3.4-bin.zip.asc \
          mv dev/commons/math/binaries/commons-math-3.4-bin.zip.md5 release/commons/math/binaries/commons-math-3.4-bin.zip.md5 \
          mv dev/commons/math/binaries/commons-math-3.4-bin.zip.sha1 release/commons/math/binaries/commons-math-3.4-bin.zip.sha1 \
          mv dev/commons/math/source/commons-math-3.4-src.tar.gz release/commons/math/source/commons-math-3.4-src.tar.gz \
          mv dev/commons/math/source/commons-math-3.4-src.tar.gz.asc release/commons/math/source/commons-math-3.4-src.tar.gz.asc \
          mv dev/commons/math/source/commons-math-3.4-src.tar.gz.md5 release/commons/math/source/commons-math-3.4-src.tar.gz.md5 \
          mv dev/commons/math/source/commons-math-3.4-src.tar.gz.sha1 release/commons/math/source/commons-math-3.4-src.tar.gz.sha1 \
          mv dev/commons/math/source/commons-math-3.4-src.zip release/commons/math/source/commons-math-3.4-src.zip \
          mv dev/commons/math/source/commons-math-3.4-src.zip.asc release/commons/math/source/commons-math-3.4-src.zip.asc \
          mv dev/commons/math/source/commons-math-3.4-src.zip.md5 release/commons/math/source/commons-math-3.4-src.zip.md5 \
          mv dev/commons/math/source/commons-math-3.4-src.zip.sha1 release/commons/math/source/commons-math-3.4-src.zip.sha1 \
          -m "Publish commons-math 3.4 Release"


(18)
Release (a.k.a. "promote") the artifacts on the Nexus server, as shown here:
  http://books.sonatype.com/nexus-book/reference/staging-repositories.html#staging-sect-releasing


(19)
Publish the web site. This is done by first committing the web site to the staging area, and then
by publishing the staging area (which is shared among all commons compoents.

In order to commit the web site to the staging area, look at the subversion workspace that was
automatically checked out during the 'mvn site' command in folder site-content. You can also check
it out directly by yourself elsewhere:

  svn checkout https://svn.apache.org/repos/infra/websites/production/commons/content/proper/commons-math site-content

Remove all files there (except .svn folder) and move all the files from the site.
You may want to adjust manually some parts like fixing broken relative links or
copying the content of the current apidocs to javadocs/api-3.4.

 $ cd site-content
 $ rm -fr *
 $ cp -pR ../target/site/* .
 $ svn commit -m "updating site after official release of version 3.4"

Beware the commit command may be very long (several hours ...). The web site will be available
for review at:
  http://commons.staging.apache.org/proper/commons-math/
 
Publishing the staging web site is done directly from a browser at URL:
  https://cms.apache.org/commons/publish

(20)
Put the official final tag to point at the same commit as the last release candidate tag:

  $ git tag -s -m "RC1 becomes the 3.4 official version." MATH_3_4 MATH_3_4_RC1
  $ git push --tags


(21)
Clean up files and prepare for next version (here we assume it will be 3.5):

 edit "pom.xml" so it contains
 
       <version>3.5-SNAPSHOT</version>

edit "src/changes/changes.xml" to add a new section for the next release, setting
the release date to "TBD" and the description to the empty string.

Double-check "pom.xml" *really* has a -SNAPSHOT version and commit everything:

  $ git add pom.xml src/changes/changes.xml
  $ git commit -m "preparing next version 3.3"
  $ git push


(22)
Switch back to master and merge the release-candidate branch

  $ git checkout master
  $ get merge release-candidates
  $ git push


(23)
Delete the now useless release-candidates branch locally (i.e. on your machine):

 $ git branch -d release-candidates

Take care at this step to *never* use the "-D" switch, but to use the "-d" switch
as shown above. The difference is that if you forgot to merge branch release-candidates
to another still existing branch (here master) as written in the preceding step, git
will refuse to delete the branch if you use "-d" and will warn you that you are deleting
a branch that is not merged, but it will delete the branch regardless of its merged
status if you use "-D".

If you deleted the branch by error without merging it, don't push the deletion to
Apache repository!

Once you are really sure everything is OK and the tags belong to the ancestors of the
Apache repository head, you can delete the release-candidates branch also on the
Apache repository. Beware that deleting a remote branch as a weird syntax, as it
uses "git push" to push "nothing" (because there is nothing before the colon) into
the "release-candidates" branch of the "origin" repository):

 $ git push origin :release-candidates


(24)
Allow for the web site mirrors to be updated (possibly several hours); then
send (from your apache account) a release announcement to the following ML:
  announce@apache.org
  dev@commons.apache.org
  user@commons.apache.org