doesn't depend on other external systems like Hadoop. `index_parallel` task is a supervisor task which basically generates
multiple worker tasks and submits them to the Overlord. Each worker task reads input data and creates segments. Once they
successfully generate segments for all input data, they report the generated segment list to the supervisor task.
The supervisor task periodically checks the status of worker tasks. If one of them fails, it retries the failed task
until the number of retries reaches the configured limit. If all worker tasks succeed, then it publishes the reported segments at once.
The parallel Index Task can run in two different modes depending on `forceGuaranteedRollup` in `tuningConfig`.
If `forceGuaranteedRollup` = false, it's executed in a single phase. In this mode,
each sub task creates segments individually and reports them to the supervisor task.
If `forceGuaranteedRollup` = true, it's executed in two phases with data shuffle which is similar to [MapReduce](https://en.wikipedia.org/wiki/MapReduce).
In the first phase, each sub task partitions input data based on `segmentGranularity` (primary partition key) in `granularitySpec`
and `partitionDimensions` (secondary partition key) in `partitionsSpec`. The partitioned data is served by
To use this task, the `firehose` in `ioConfig` should be _splittable_ and `maxNumConcurrentSubTasks` should be set something larger than 1 in `tuningConfig`.
- The number of concurrent tasks run in parallel ingestion is determined by `maxNumConcurrentSubTasks` in the `tuningConfig`.
The supervisor task checks the number of current running sub tasks and creates more if it's smaller than `maxNumConcurrentSubTasks` no matter how many task slots are currently available.
|type|The task type, this should always be `index_parallel`.|yes|
|id|The task ID. If this is not explicitly specified, Druid generates the task ID using task type, data source name, interval, and date-time stamp. |no|
|spec|The ingestion spec including the data schema, IOConfig, and TuningConfig. See below for more details. |yes|
|context|Context containing various task configuration parameters. See below for more details.|no|
|appendToExisting|Creates segments as additional shards of the latest version, effectively appending to the segment set instead of replacing it. This will only work if the existing segment set has extendable-type shardSpecs.|false|no|
|maxRowsInMemory|Used in determining when intermediate persists to disk should occur. Normally user does not need to set this, but depending on the nature of data, if rows are short in terms of bytes, user may not want to store a million rows in memory and this value should be set.|1000000|no|
|maxBytesInMemory|Used in determining when intermediate persists to disk should occur. Normally this is computed internally and user does not need to set it. This value represents number of bytes to aggregate in heap memory before persisting. This is based on a rough estimate of memory usage and not actual usage. The maximum heap memory usage for indexing is maxBytesInMemory * (2 + maxPendingPersists)|1/6 of max JVM memory|no|
|maxTotalRows|Deprecated. Use `partitionsSpec` instead. Total number of rows in segments waiting for being pushed. Used in determining when intermediate pushing should occur.|20000000|no|
|numShards|Deprecated. Use `partitionsSpec` instead. Directly specify the number of shards to create. If this is specified and `intervals` is specified in the `granularitySpec`, the index task can skip the determine intervals/partitions pass through the data. `numShards` cannot be specified if `maxRowsPerSegment` is set.|null|no|
|splitHintSpec|Used to give a hint to control the amount of data that each first phase task reads. This hint could be ignored depending on the implementation of firehose. See [SplitHintSpec](#splithintspec) for more details.|null|no|
|partitionsSpec|Defines how to partition data in each timeChunk, see [PartitionsSpec](#partitionsspec)|`dynamic` if `forceGuaranteedRollup` = false, `hashed` if `forceGuaranteedRollup` = true|no|
|indexSpec|Defines segment storage format options to be used at indexing time, see [IndexSpec](index.md#indexspec)|null|no|
|indexSpecForIntermediatePersists|Defines segment storage format options to be used at indexing time for intermediate persisted temporary segments. this can be used to disable dimension/metric compression on intermediate segments to reduce memory required for final merging. however, disabling compression on intermediate segments might increase page cache use while they are used before getting merged into final segment published, see [IndexSpec](index.md#indexspec) for possible values.|same as indexSpec|no|
|maxPendingPersists|Maximum number of persists that can be pending but not started. If this limit would be exceeded by a new intermediate persist, ingestion will block until the currently-running persist finishes. Maximum heap memory usage for indexing scales with maxRowsInMemory * (2 + maxPendingPersists).|0 (meaning one persist can be running concurrently with ingestion, and none can be queued up)|no|
|forceGuaranteedRollup|Forces guaranteeing the [perfect rollup](../ingestion/index.md#rollup). The perfect rollup optimizes the total size of generated segments and querying time while indexing time will be increased. If this is set to true, `numShards` in `tuningConfig` and `intervals` in `granularitySpec` must be set. Note that the result segments would be hash-partitioned. This flag cannot be used with `appendToExisting` of IOConfig. For more details, see the below __Segment pushing modes__ section.|false|no|
|reportParseExceptions|If true, exceptions encountered during parsing will be thrown and will halt ingestion; if false, unparseable rows and fields will be skipped.|false|no|
|pushTimeout|Milliseconds to wait for pushing segments. It must be >= 0, where 0 means to wait forever.|0|no|
|segmentWriteOutMediumFactory|Segment write-out medium to use when creating segments. See [SegmentWriteOutMediumFactory](#segmentwriteoutmediumfactory).|Not specified, the value from `druid.peon.defaultSegmentWriteOutMediumFactory.type` is used|no|
|maxNumConcurrentSubTasks|Maximum number of sub tasks which can be run in parallel at the same time. The supervisor task would spawn worker tasks up to `maxNumConcurrentSubTasks` regardless of the current available task slots. If this value is set to 1, the supervisor task processes data ingestion on its own instead of spawning worker tasks. If this value is set to too large, too many worker tasks can be created which might block other ingestion. Check [Capacity Planning](#capacity-planning) for more details.|1|no|
|maxNumSegmentsToMerge|Max limit for the number of segments that a single task can merge at the same time in the second phase. Used only `forceGuaranteedRollup` is set.|100|no|
|totalNumMergeTasks|Total number of tasks to merge segments in the second phase when `forceGuaranteedRollup` is set.|10|no|
`SplitHintSpec` is used to give a hint when the supervisor task creates input splits.
Note that each sub task processes a single input split. You can control the amount of data each sub task will read during the first phase.
Currently only one splitHintSpec, i.e., `segments`, is available.
#### `SegmentsSplitHintSpec`
`SegmentsSplitHintSpec` is used only for `IngestSegmentFirehose`.
|property|description|default|required?|
|--------|-----------|-------|---------|
|type|This should always be `segments`.|none|yes|
|maxInputSegmentBytesPerTask|Maximum number of bytes of input segments to process in a single task. If a single segment is larger than this number, it will be processed by itself in a single task (input segments are never split across tasks).|150MB|no|
|targetRowsPerSegment|Target number of rows to include in a partition, should be a number that targets segments of 500MB\~1GB.|5000000 (if `numShards` is not set)|either this or `numShards`|
|numShards|Directly specify the number of shards to create. If this is specified and `intervals` is specified in the `granularitySpec`, the index task can skip the determine intervals/partitions pass through the data. `numShards` cannot be specified if `targetRowsPerSegment` is set.|null|no|
|partitionDimensions|The dimensions to partition on. Leave blank to select all dimensions. Only used with `numShards`, will be ignored when `targetRowsPerSegment` is set.|null|no|
Returns the task attempt history of the worker task spec of the given id, or HTTP 404 Not Found error if the supervisor task is running in the sequential mode.
|id|The task ID. If this is not explicitly specified, Druid generates the task ID using task type, data source name, interval, and date-time stamp. |no|
|spec|The ingestion spec including the data schema, IOConfig, and TuningConfig. See below for more details. |yes|
|context|Context containing various task configuration parameters. See below for more details.|no|
|appendToExisting|Creates segments as additional shards of the latest version, effectively appending to the segment set instead of replacing it. This will only work if the existing segment set has extendable-type shardSpecs.|false|no|
|maxRowsInMemory|Used in determining when intermediate persists to disk should occur. Normally user does not need to set this, but depending on the nature of data, if rows are short in terms of bytes, user may not want to store a million rows in memory and this value should be set.|1000000|no|
|maxBytesInMemory|Used in determining when intermediate persists to disk should occur. Normally this is computed internally and user does not need to set it. This value represents number of bytes to aggregate in heap memory before persisting. This is based on a rough estimate of memory usage and not actual usage. The maximum heap memory usage for indexing is maxBytesInMemory * (2 + maxPendingPersists)|1/6 of max JVM memory|no|
|maxTotalRows|Deprecated. Use `partitionsSpec` instead. Total number of rows in segments waiting for being pushed. Used in determining when intermediate pushing should occur.|20000000|no|
|numShards|Deprecated. Use `partitionsSpec` instead. Directly specify the number of shards to create. If this is specified and `intervals` is specified in the `granularitySpec`, the index task can skip the determine intervals/partitions pass through the data. `numShards` cannot be specified if `maxRowsPerSegment` is set.|null|no|
|partitionDimensions|Deprecated. Use `partitionsSpec` instead. The dimensions to partition on. Leave blank to select all dimensions. Only used with `forceGuaranteedRollup` = true, will be ignored otherwise.|null|no|
|partitionsSpec|Defines how to partition data in each timeChunk, see [PartitionsSpec](#partitionsspec)|`dynamic` if `forceGuaranteedRollup` = false, `hashed` if `forceGuaranteedRollup` = true|no|
|indexSpec|Defines segment storage format options to be used at indexing time, see [IndexSpec](index.md#indexspec)|null|no|
|indexSpecForIntermediatePersists|Defines segment storage format options to be used at indexing time for intermediate persisted temporary segments. this can be used to disable dimension/metric compression on intermediate segments to reduce memory required for final merging. however, disabling compression on intermediate segments might increase page cache use while they are used before getting merged into final segment published, see [IndexSpec](index.md#indexspec) for possible values.|same as indexSpec|no|
|maxPendingPersists|Maximum number of persists that can be pending but not started. If this limit would be exceeded by a new intermediate persist, ingestion will block until the currently-running persist finishes. Maximum heap memory usage for indexing scales with maxRowsInMemory * (2 + maxPendingPersists).|0 (meaning one persist can be running concurrently with ingestion, and none can be queued up)|no|
|forceGuaranteedRollup|Forces guaranteeing the [perfect rollup](../ingestion/index.md#rollup). The perfect rollup optimizes the total size of generated segments and querying time while indexing time will be increased. If this is set to true, the index task will read the entire input data twice: one for finding the optimal number of partitions per time chunk and one for generating segments. Note that the result segments would be hash-partitioned. This flag cannot be used with `appendToExisting` of IOConfig. For more details, see the below __Segment pushing modes__ section.|false|no|
|reportParseExceptions|DEPRECATED. If true, exceptions encountered during parsing will be thrown and will halt ingestion; if false, unparseable rows and fields will be skipped. Setting `reportParseExceptions` to true will override existing configurations for `maxParseExceptions` and `maxSavedParseExceptions`, setting `maxParseExceptions` to 0 and limiting `maxSavedParseExceptions` to no more than 1.|false|no|
|segmentWriteOutMediumFactory|Segment write-out medium to use when creating segments. See [SegmentWriteOutMediumFactory](#segmentwriteoutmediumfactory).|Not specified, the value from `druid.peon.defaultSegmentWriteOutMediumFactory.type` is used|no|
|logParseExceptions|If true, log an error message when a parsing exception occurs, containing information about the row where the error occurred.|false|no|
|maxParseExceptions|The maximum number of parse exceptions that can occur before the task halts ingestion and fails. Overridden if `reportParseExceptions` is set.|unlimited|no|
|maxSavedParseExceptions|When a parse exception occurs, Druid can keep track of the most recent parse exceptions. "maxSavedParseExceptions" limits how many exception instances will be saved. These saved exceptions will be made available after the task finishes in the [task completion report](tasks.md#task-reports). Overridden if `reportParseExceptions` is set.|0|no|
|numShards|Directly specify the number of shards to create. If this is specified and `intervals` is specified in the `granularitySpec`, the index task can skip the determine intervals/partitions pass through the data. `numShards` cannot be specified if `maxRowsPerSegment` is set.|null|no|
|type|String|See [Additional Peon Configuration: SegmentWriteOutMediumFactory](../configuration/index.md#segmentwriteoutmediumfactory) for explanation and available options.|yes|
Firehoses are pluggable and thus the configuration schema can and will vary based on the `type` of the firehose.
| Field | Type | Description | Required |
|-------|------|-------------|----------|
| type | String | Specifies the type of firehose. Each value will have its own configuration schema, firehoses packaged with Druid are described below. | yes |
## Firehoses
There are several firehoses readily available in Druid, some are meant for examples, others can be used directly in a production environment.
For additional firehoses, please see our [extensions list](../development/extensions.md).
<aname="local-firehose"></a>
### LocalFirehose
This Firehose can be used to read the data from files on local disk, and is mainly intended for proof-of-concept testing, and works with `string` typed parsers.
This Firehose is _splittable_ and can be used by [native parallel index tasks](native-batch.md#parallel-task).
Since each split represents a file in this Firehose, each worker task of `index_parallel` will read a file.
A sample local Firehose spec is shown below:
```json
{
"type": "local",
"filter" : "*.csv",
"baseDir": "/data/directory"
}
```
|property|description|required?|
|--------|-----------|---------|
|type|This should be "local".|yes|
|filter|A wildcard filter for files. See [here](http://commons.apache.org/proper/commons-io/apidocs/org/apache/commons/io/filefilter/WildcardFileFilter.html) for more information.|yes|
|baseDir|directory to search recursively for files to be ingested. |yes|
<aname="http-firehose"></a>
### HttpFirehose
This Firehose can be used to read the data from remote sites via HTTP, and works with `string` typed parsers.
This Firehose is _splittable_ and can be used by [native parallel index tasks](native-batch.md#parallel-task).
Since each split represents a file in this Firehose, each worker task of `index_parallel` will read a file.
The below configurations can optionally be used for tuning the Firehose performance.
|property|description|default|
|--------|-----------|-------|
|maxCacheCapacityBytes|Maximum size of the cache space in bytes. 0 means disabling cache. Cached files are not removed until the ingestion task completes.|1073741824|
|maxFetchCapacityBytes|Maximum size of the fetch space in bytes. 0 means disabling prefetch. Prefetched files are removed immediately once they are read.|1073741824|
|prefetchTriggerBytes|Threshold to trigger prefetching HTTP objects.|maxFetchCapacityBytes / 2|
|fetchTimeout|Timeout for fetching an HTTP object.|60000|
|maxFetchRetry|Maximum retries for fetching an HTTP object.|3|
<aname="segment-firehose"></a>
### IngestSegmentFirehose
This Firehose can be used to read the data from existing druid segments, potentially using a new schema and changing the name, dimensions, metrics, rollup, etc. of the segment.
This Firehose is _splittable_ and can be used by [native parallel index tasks](native-batch.md#parallel-task).
This firehose will accept any type of parser, but will only utilize the list of dimensions and the timestamp specification.
A sample ingest Firehose spec is shown below:
```json
{
"type": "ingestSegment",
"dataSource": "wikipedia",
"interval": "2013-01-01/2013-01-02"
}
```
|property|description|required?|
|--------|-----------|---------|
|type|This should be "ingestSegment".|yes|
|dataSource|A String defining the data source to fetch rows from, very similar to a table in a relational database|yes|
|interval|A String representing the ISO-8601 interval. This defines the time range to fetch the data over.|yes|
|dimensions|The list of dimensions to select. If left empty, no dimensions are returned. If left null or not defined, all dimensions are returned. |no|
|metrics|The list of metrics to select. If left empty, no metrics are returned. If left null or not defined, all metrics are selected.|no|
|maxInputSegmentBytesPerTask|Deprecated. Use [SegmentsSplitHintSpec](#segmentssplithintspec) instead. When used with the native parallel index task, the maximum number of bytes of input segments to process in a single task. If a single segment is larger than this number, it will be processed by itself in a single task (input segments are never split across tasks). Defaults to 150MB.|no|
This Firehose can be used to ingest events residing in an RDBMS. The database connection information is provided as part of the ingestion spec.
For each query, the results are fetched locally and indexed.
If there are multiple queries from which data needs to be indexed, queries are prefetched in the background, up to `maxFetchCapacityBytes` bytes.
This firehose will accept any type of parser, but will only utilize the list of dimensions and the timestamp specification. See the extension documentation for more detailed ingestion examples.
"sqls": ["SELECT * FROM table1", "SELECT * FROM table2"]
}
```
|property|description|default|required?|
|--------|-----------|-------|---------|
|type|This should be "sql".||Yes|
|database|Specifies the database connection details.||Yes|
|maxCacheCapacityBytes|Maximum size of the cache space in bytes. 0 means disabling cache. Cached files are not removed until the ingestion task completes.|1073741824|No|
|maxFetchCapacityBytes|Maximum size of the fetch space in bytes. 0 means disabling prefetch. Prefetched files are removed immediately once they are read.|1073741824|No|
|prefetchTriggerBytes|Threshold to trigger prefetching SQL result objects.|maxFetchCapacityBytes / 2|No|
|fetchTimeout|Timeout for fetching the result set.|60000|No|
|foldCase|Toggle case folding of database column names. This may be enabled in cases where the database returns case insensitive column names in query results.|false|No|
|sqls|List of SQL queries where each SQL query would retrieve the data to be indexed.||Yes|
#### Database
|property|description|default|required?|
|--------|-----------|-------|---------|
|type|The type of database to query. Valid values are `mysql` and `postgresql`_||Yes|
|connectorConfig|Specify the database connection properties via `connectURI`, `user` and `password`||Yes|
<aname="inline-firehose"></a>
### InlineFirehose
This Firehose can be used to read the data inlined in its own spec.
It can be used for demos or for quickly testing out parsing and schema, and works with `string` typed parsers.
A sample inline Firehose spec is shown below:
```json
{
"type": "inline",
"data": "0,values,formatted\n1,as,CSV"
}
```
|property|description|required?|
|--------|-----------|---------|
|type|This should be "inline".|yes|
|data|Inlined data to ingest.|yes|
<aname="combining-firehose"></a>
### CombiningFirehose
This Firehose can be used to combine and merge data from a list of different Firehoses.
