* introduces `UnionQuery`
* some changes to enable a `UnionQuery` to have multiple input datasources
* `UnionQuery` execution is driven by the `QueryLogic` - which could later enable to reduce some complexity in `ClientQuerySegmentWalker`
* to run the subqueries of `UnionQuery` there was a need to access the `conglomerate` from the `Runner`; to enable that some refactors were done
* renamed `UnionQueryRunner` to `UnionDataSourceQueryRunner`
* `QueryRunnerFactoryConglomerate` have taken the place of `QueryToolChestWarehouse` which shaves of some unnecessary things here and there
* small cleanup/refactors
index_realtime tasks were removed from the documentation in #13107. Even
at that time, they weren't really documented per se— just mentioned. They
existed solely to support Tranquility, which is an obsolete ingestion
method that predates migration of Druid to ASF and is no longer being
maintained. Tranquility docs were also de-linked from the sidebars and
the other doc pages in #11134. Only a stub remains, so people with
links to the page can see that it's no longer recommended.
index_realtime_appenderator tasks existed in the code base, but were
never documented, nor as far as I am aware were they used for any purpose.
This patch removes both task types completely, as well as removes all
supporting code that was otherwise unused. It also updates the stub
doc for Tranquility to be firmer that it is not compatible. (Previously,
the stub doc said it wasn't recommended, and pointed out that it is
built against an ancient 0.9.2 version of Druid.)
ITUnionQueryTest has been migrated to the new integration tests framework and updated to use Kafka ingestion.
Co-authored-by: Gian Merlino <gianmerlino@gmail.com>
Issue: #14989
The initial step in optimizing segment metadata was to centralize the construction of datasource schema in the Coordinator (#14985). Thereafter, we addressed the problem of publishing schema for realtime segments (#15475). Subsequently, our goal is to eliminate the requirement for regularly executing queries to obtain segment schema information.
This is the final change which involves publishing segment schema for finalized segments from task and periodically polling them in the Coordinator.
The initial step in optimizing segment metadata was to centralize the construction of datasource schema in the Coordinator (#14985). Subsequently, our goal is to eliminate the requirement for regularly executing queries to obtain segment schema information. This task encompasses addressing both realtime and finalized segments.
This modification specifically addresses the issue with realtime segments. Tasks will now routinely communicate the schema for realtime segments during the segment announcement process. The Coordinator will identify the schema alongside the segment announcement and subsequently update the schema for realtime segments in the metadata cache.
In the current design, brokers query both data nodes and tasks to fetch the schema of the segments they serve. The table schema is then constructed by combining the schemas of all segments within a datasource. However, this approach leads to a high number of segment metadata queries during broker startup, resulting in slow startup times and various issues outlined in the design proposal.
To address these challenges, we propose centralizing the table schema management process within the coordinator. This change is the first step in that direction. In the new arrangement, the coordinator will take on the responsibility of querying both data nodes and tasks to fetch segment schema and subsequently building the table schema. Brokers will now simply query the Coordinator to fetch table schema. Importantly, brokers will still retain the capability to build table schemas if the need arises, ensuring both flexibility and resilience.
This change updates dependencies as needed and fixes tests to remove code incompatible with Java 21
As a result all unit tests now pass with Java 21.
* update maven-shade-plugin to 3.5.0 and follow-up to #15042
* explain why we need to override configuration when specifying outputFile
* remove configuration from dependency management in favor of explicit overrides in each module.
* update to mockito to 5.5.0 for Java 21 support when running with Java 11+
* continue using latest mockito 4.x (4.11.0) when running with Java 8
* remove need to mock private fields
* exclude incorrectly declared mockito dependency from pac4j-oidc
* remove mocking of ByteBuffer, since sealed classes can no longer be mocked in Java 21
* add JVM options workaround for system-rules junit plugin not supporting Java 18+
* exclude older versions of byte-buddy from assertj-core
* fix for Java 19 changes in floating point string representation
* fix missing InitializedNullHandlingTest
* update easymock to 5.2.0 for Java 21 compatibility
* update animal-sniffer-plugin to 1.23
* update nl.jqno.equalsverifier to 3.15.1
* update exec-maven-plugin to 3.1.0
* disable parallel builds; enable batch mode to get rid of transfer progress
* restore .m2 from setup-java if not found
* some change to sql
* add ws
* fix quote
* fix quote
* undo querytest change
* nullhandling in mvtest
* init more
* skip commitid plugin
* add-back 1.0C to build ; remove redundant skip-s from copy-resources; add comment
This commit pulls out some changes from #14407 to simplify that PR.
Changes:
- Rename `IndexerMetadataStorageCoordinator.announceHistoricalSegments` to `commitSegments`
- Rename the overloaded method to `commitSegmentsAndMetadata`
- Fix some typos
Changes:
- Make ServiceMetricEvent.Builder extend ServiceEventBuilder<ServiceMetricEvent>
and thus convert it to a plain builder rather than a builder of builder.
- Add methods setCreatedTime , setMetricAndValue to the builder
* merge druid-core, extendedset, and druid-hll into druid-processing to simplify everything
* fix poms and license stuff
* mockito is evil
* allow reset of JvmUtils RuntimeInfo if tests used static injection to override
Refactor DataSource to have a getAnalysis method()
This removes various parts of the code where while loops and instanceof
checks were being used to walk through the structure of DataSource objects
in order to build a DataSourceAnalysis. Instead we just ask the DataSource
for its analysis and allow the stack to rebuild whatever structure existed.
We introduce two new configuration keys that refine the query context security model controlled by druid.auth.authorizeQueryContextParams. When that value is set to true then two other configuration options become available:
druid.auth.unsecuredContextKeys: The set of query context keys that do not require a security check. Use this for the "white-list" of key to allow. All other keys go through the existing context key security checks.
druid.auth.securedContextKeys: The set of query context keys that do require a security check. Use this when you want to allow all but a specific set of keys: only these keys go through the existing context key security checks.
Both are set using JSON list format:
druid.auth.securedContextKeys=["secretKey1", "secretKey2"]
You generally set one or the other values. If both are set, unsecuredContextKeys acts as exceptions to securedContextKeys.
In addition, Druid defines two query context keys which always bypass checks because Druid uses them internally:
sqlQueryId
sqlStringifyArrays
* Introduce defaultOnDiskStorage config for groupBy
* add debug log to groupby query config
* Apply config change suggestion from review
* Remove accidental new lines
* update default value of new default disk storage config
* update debug log to have more descriptive text
* Make maxOnDiskStorage and defaultOnDiskStorage HumanRedadableBytes
* improve test coverage
* Provide default implementation to new default method on advice of reviewer
Often users are submitting queries, and ingestion specs that work only if the relevant extension is not loaded. However, the error is too technical for the users and doesn't suggest them to check for missing extensions. This PR modifies the error message so users can at least check their settings before assuming that the error is because of a bug.
The query context is a way that the user gives a hint to the Druid query engine, so that they enforce a certain behavior or at least let the query engine prefer a certain plan during query planning. Today, there are 3 types of query context params as below.
Default context params. They are set via druid.query.default.context in runtime properties. Any user context params can be default params.
User context params. They are set in the user query request. See https://druid.apache.org/docs/latest/querying/query-context.html for parameters.
System context params. They are set by the Druid query engine during query processing. These params override other context params.
Today, any context params are allowed to users. This can cause
1) a bad UX if the context param is not matured yet or
2) even query failure or system fault in the worst case if a sensitive param is abused, ex) maxSubqueryRows.
This PR adds an ability to limit context params per user role. That means, a query will fail if you have a context param set in the query that is not allowed to you. To do that, this PR adds a new built-in resource type, QUERY_CONTEXT. The resource to authorize has a name of the context param (such as maxSubqueryRows) and the type of QUERY_CONTEXT. To allow a certain context param for a user, the user should be granted WRITE permission on the context param resource. Here is an example of the permission.
{
"resourceAction" : {
"resource" : {
"name" : "maxSubqueryRows",
"type" : "QUERY_CONTEXT"
},
"action" : "WRITE"
},
"resourceNamePattern" : "maxSubqueryRows"
}
Each role can have multiple permissions for context params. Each permission should be set for different context params.
When a query is issued with a query context X, the query will fail if the user who issued the query does not have WRITE permission on the query context X. In this case,
HTTP endpoints will return 403 response code.
JDBC will throw ForbiddenException.
Note: there is a context param called brokerService that is used only by the router. This param is used to pin your query to run it in a specific broker. Because the authorization is done not in the router, but in the broker, if you have brokerService set in your query without a proper permission, your query will fail in the broker after routing is done. Technically, this is not right because the authorization is checked after the context param takes effect. However, this should not cause any user-facing issue and thus should be OK. The query will still fail if the user doesn’t have permission for brokerService.
The context param authorization can be enabled using druid.auth.authorizeQueryContextParams. This is disabled by default to avoid any hassle when someone upgrades his cluster blindly without reading release notes.
Druid currently has 2 serverViews, regular serverView and filtered serverView. The regular serverView is used to monitor all segment announcements from all data nodes (historicals, tasks, indexers). The filtered serverView is used when you want to watch segment announcements from particular tiers. Since these server views keep track of different sets of druidServers and segments in memory, they should be maintained separately. However, they currently share the same name for their executorService, which can cause confusion and make debugging harder especially in the broker since it is using both serverViews, the filtered view for normal query processing and the regular view to serve the servers table (I'm unsure whether this is intended or whether this is a good behavior). This PR changes it to a more obvious name.
This PR also removes SingleServerInventoryView. This view was deprecated a long time ago and has not been documented at least since 0.13 (#6127). I also don't think this can be better in any case than BatchServerInventoryView. Finally, I merged AbstractCuratorServerInventoryView and BatchServerInventoryView as we no longer need AbstractCuratorServerInventoryView after SingleServerInventoryView is removed.
* Make nodeRole available during binding; add support for dynamic registration of DruidService
* fix checkstyle and test
* fix customRole test
* address comments
* add more javadoc
* fix bug:MaterializedView gropuby query return map result by default
* add unit test
* add unit test
* add unit test
* fix bug:MaterializedView gropuby query return map result by default
* add unit test
* add unit test
* add unit test
* update pr
* update pr
Co-authored-by: xiangqiao <xiangqiao@kuaishou.com>
* Broker: Add ability to inline subqueries.
The main changes:
- ClientQuerySegmentWalker: Add ability to inline queries.
- Query: Add "getSubQueryId" and "withSubQueryId" methods.
- QueryMetrics: Add "subQueryId" dimension.
- ServerConfig: Add new "maxSubqueryRows" parameter, which is used by
ClientQuerySegmentWalker to limit how many rows can be inlined per
query.
- IndexedTableJoinMatcher: Allow creating keys on top of unknown types,
by assuming they are strings. This is useful because not all types are
known for fields in query results.
- InlineDataSource: Store RowSignature rather than component parts. Add
more zealous "equals" and "hashCode" methods to ease testing.
- Moved QuerySegmentWalker test code from CalciteTests and
SpecificSegmentsQueryWalker in druid-sql to QueryStackTests in
druid-server. Use this to spin up a new ClientQuerySegmentWalkerTest.
* Adjustments from CI.
* Fix integration test.
* intelliJ inspections cleanup
- remove redundant escapes
- performance warnings
- access static member via instance reference
- static method declared final
- inner class may be static
Most of these changes are aesthetic, however, they will allow inspections to
be enabled as part of CI checks going forward
The valuable changes in this delta are:
- using StringBuilder instead of string addition in a loop
indexing-hadoop/.../Utils.java
processing/.../ByteBufferMinMaxOffsetHeap.java
- Use class variables instead of static variables for parameterized test
processing/src/.../ScanQueryLimitRowIteratorTest.java
* Add intelliJ inspection warnings as errors to druid profile
* one more static inner class
* Reconcile terminology and method naming to 'used/unused segments'; Don't use terms 'enable/disable data source'; Rename MetadataSegmentManager to MetadataSegments; Make REST API methods which mark segments as used/unused to return server error instead of an empty response in case of error
* Fix brace
* Import order
* Rename withKillDataSourceWhitelist to withSpecificDataSourcesToKill
* Fix tests
* Fix tests by adding proper methods without interval parameters to IndexerMetadataStorageCoordinator instead of hacking with Intervals.ETERNITY
* More aligned names of DruidCoordinatorHelpers, rename several CoordinatorDynamicConfig parameters
* Rename ClientCompactTaskQuery to ClientCompactionTaskQuery for consistency with CompactionTask; ClientCompactQueryTuningConfig to ClientCompactionTaskQueryTuningConfig
* More variable and method renames
* Rename MetadataSegments to SegmentsMetadata
* Javadoc update
* Simplify SegmentsMetadata.getUnusedSegmentIntervals(), more javadocs
* Update Javadoc of VersionedIntervalTimeline.iterateAllObjects()
* Reorder imports
* Rename SegmentsMetadata.tryMark... methods to mark... and make them to return boolean and the numbers of segments changed and relay exceptions to callers
* Complete merge
* Add CollectionUtils.newTreeSet(); Refactor DruidCoordinatorRuntimeParams creation in tests
* Remove MetadataSegmentManager
* Rename millisLagSinceCoordinatorBecomesLeaderBeforeCanMarkAsUnusedOvershadowedSegments to leadingTimeMillisBeforeCanMarkAsUnusedOvershadowedSegments
* Fix tests, refactor DruidCluster creation in tests into DruidClusterBuilder
* Fix inspections
* Fix SQLMetadataSegmentManagerEmptyTest and rename it to SqlSegmentsMetadataEmptyTest
* Rename SegmentsAndMetadata to SegmentsAndCommitMetadata to reduce the similarity with SegmentsMetadata; Rename some methods
* Rename DruidCoordinatorHelper to CoordinatorDuty, refactor DruidCoordinator
* Unused import
* Optimize imports
* Rename IndexerSQLMetadataStorageCoordinator.getDataSourceMetadata() to retrieveDataSourceMetadata()
* Unused import
* Update terminology in datasource-view.tsx
* Fix label in datasource-view.spec.tsx.snap
* Fix lint errors in datasource-view.tsx
* Doc improvements
* Another attempt to please TSLint
* Another attempt to please TSLint
* Style fixes
* Fix IndexerSQLMetadataStorageCoordinator.createUsedSegmentsSqlQueryForIntervals() (wrong merge)
* Try to fix docs build issue
* Javadoc and spelling fixes
* Rename SegmentsMetadata to SegmentsMetadataManager, address other comments
* Address more comments
Builds on #9235, using the datasource analysis functionality to replace various ad-hoc
approaches. The most interesting changes are in ClientQuerySegmentWalker (brokers),
ServerManager (historicals), and SinkQuerySegmentWalker (indexing tasks).
Other changes related to improving how we analyze queries:
1) Changes TimelineServerView to return an Optional timeline, which I thought made
the analysis changes cleaner to implement.
2) Added QueryToolChest#canPerformSubquery, which is now used by query entry points to
determine whether it is safe to pass a subquery dataSource to the query toolchest.
Fixes an issue introduced in #5471 where subqueries under non-groupBy-typed queries
were silently ignored, since neither the query entry point nor the toolchest did
anything special with them.
3) Removes the QueryPlus.withQuerySegmentSpec method, which was mostly being used in
error-prone ways (ignoring any potential subqueries, and not verifying that the
underlying data source is actually a table). Replaces with a new function,
Queries.withSpecificSegments, that includes sanity checks.
Zoltan Haindrich
Abhishek Agarwal
Clint Wylie
Adarsh Sanjeev
Rishabh Singh
Laksh Singla
Karan Kumar
Xavier Léauté
Soumyava
Zoltan Haindrich
Tejaswini Bandlamudi
Kashif Faraz
AmatyaAvadhanula
Paul Rogers
Frank Chen
Lucas Capistrant
Jihoon Son
JoyKing
Jonathan Wei
xiangqiao123
Gian Merlino
Suneet Saldanha
Roman Leventov
Fangyuan Deng
jon-wei