Currently, a shared lock is acquired only when all other locks are also shared locks.
This commit updates the behaviour and acquires a shared lock only if all locks
of equal or higher priority are either shared locks or are already revoked.
The lock type of locks with lower priority does not matter as they can be revoked.
Eliminates two common sources of noise with Kafka supervisors that have
large numbers of tasks and partitions:
1) Log the report at DEBUG rather than INFO level at each run cycle.
It can get quite large, and can be retrieved via API when needed.
2) Use log4j2.xml to quiet down the org.apache.kafka.clients.consumer.internals
package. Avoids a log message per-partition per-minute as part of seeking
to the latest offset in the reporting thread. In the tasks, where this
sort of logging might be more useful, we have another log message with
the same information: "Seeking partition[%s] to[%s]".
* SeekableStreamSupervisor: Don't enqueue duplicate notices.
Similar goal to #12018, but more aggressive. Don't enqueue a notice at
all if it is equal to one currently in the queue.
* Adjustments from review.
* Update indexing-service/src/test/java/org/apache/druid/indexing/overlord/supervisor/NoticesQueueTest.java
Co-authored-by: Kashif Faraz <kashif.faraz@gmail.com>
Co-authored-by: Kashif Faraz <kashif.faraz@gmail.com>
Changes:
- Add a metric for partition-wise kafka/kinesis lag for streaming ingestion.
- Emit lag metrics for streaming ingestion when supervisor is not suspended and state is in {RUNNING, IDLE, UNHEALTHY_TASKS, UNHEALTHY_SUPERVISOR}
- Document metrics
* Compaction: Fetch segments one at a time on main task; skip when possible.
Compact tasks include the ability to fetch existing segments and determine
reasonable defaults for granularitySpec, dimensionsSpec, and metricsSpec.
This is a useful feature that makes compact tasks work well even when the
user running the compaction does not have a clear idea of what they want
the compacted segments to be like.
However, this comes at a cost: it takes time, and disk space, to do all
of these fetches. This patch improves the situation in two ways:
1) When segments do need to be fetched, download them one at a time and
delete them when we're done. This still takes time, but minimizes the
required disk space.
2) Don't fetch segments on the main compact task when they aren't needed.
If the user provides a full granularitySpec, dimensionsSpec, and
metricsSpec, we can skip it.
* Adjustments.
* Changes from code review.
* Fix logic for determining rollup.
* Support for middle manager less druid, tasks launch as k8s jobs
* Fixing forking task runner test
* Test cleanup, dependency cleanup, intellij inspections cleanup
* Changes per PR review
Add configuration option to disable http/https proxy for the k8s client
Update the docs to provide more detail about sidecar support
* Removing un-needed log lines
* Small changes per PR review
* Upon task completion we callback to the overlord to update the status / locaiton, for slower k8s clusters, this reduces locking time significantly
* Merge conflict fix
* Fixing tests and docs
* update tiny-cluster.yaml
changed `enableTaskLevelLogPush` to `encapsulatedTask`
* Apply suggestions from code review
Co-authored-by: Abhishek Agarwal <1477457+abhishekagarwal87@users.noreply.github.com>
* Minor changes per PR request
* Cleanup, adding test to AbstractTask
* Add comment in peon.sh
* Bumping code coverage
* More tests to make code coverage happy
* Doh a duplicate dependnecy
* Integration test setup is weird for k8s, will do this in a different PR
* Reverting back all integration test changes, will do in anotbher PR
* use StringUtils.base64 instead of Base64
* Jdk is nasty, if i compress in jdk 11 in jdk 17 the decompressed result is different
Co-authored-by: Rahul Gidwani <r_gidwani@apple.com>
Co-authored-by: Abhishek Agarwal <1477457+abhishekagarwal87@users.noreply.github.com>
In clusters with a large number of segments, the duty `MarkAsUnusedOvershadowedSegments`
can take a long very long time to finish. This is because of the costly invocation of
`timeline.isOvershadowed` which is done for every used segment in every coordinator run.
Changes
- Use `DataSourceSnapshot.getOvershadowedSegments` to get all overshadowed segments
- Iterate over this set instead of all used segments to identify segments that can be marked as unused
- Mark segments as unused in the DB in batches rather than one at a time
- Refactor: Add class `SegmentTimeline` for ease of use and readability while using a
`VersionedIntervalTimeline` of segments.
* Remove basePersistDirectory from tuning configs.
Since the removal of CliRealtime, it serves no purpose, since it is
always overridden in production using withBasePersistDirectory given
some subdirectory of the task work directory.
Removing this from the tuning config has a benefit beyond removing
no-longer-needed logic: it also avoids the side effect of empty
"druid-realtime-persist" directories getting created in the systemwide
temp directory.
* Test adjustments to appropriately set basePersistDirectory.
* Remove unused import.
* Fix RATC constructor.
Overlord leader election can sometimes fail due to task lock re-acquisition issues.
This commit solves the issue by failing such tasks and clearing all their locks.
This commit fixes issues with delayed supervisor termination during certain transient states.
Tasks can be created during supervisor termination and left behind since the cleanup may
not consider these newly added tasks.
#12178 added a lock for the entire process of task creation to prevent such dangling tasks.
But it also introduced a deadlock scenario as follows:
- An invocation of `runInternal` is in progress.
- A `stop` request comes, acquires `stateChangeLock` and submit a `ShutdownNotice`
- `runInternal` keeps waiting to acquire the `stateChangeLock`
- `ShutdownNotice` remains stuck in the notice queue because `runInternal` is still running
- After some timeout, the supervisor goes through a forced termination
Fix:
* `SeekableStreamSupervisor.runInternal` - do not try to acquire lock if supervisor is already stopping
* `SupervisorStateManager.maybeSetState` - do not allow transitions from STOPPING state
* Fixing RACE in HTTP remote task Runner
* Changes in the interface
* Updating documentation
* Adding test cases to SwitchingTaskLogStreamer
* Adding more tests
* Fix serialization in TaskReportFileWriters.
For some reason, serializing a Map<String, TaskReport> would omit the
"type" field. Explicitly sending each value through the ObjectMapper
fixes this, because the type information does not get lost.
* Fixes for static analysis.
* Fix race in TaskQueue.notifyStatus.
It was possible for manageInternal to relaunch a task while it was
being cleaned up, due to a race that happens when notifyStatus is
called to clean up a successful task:
1) In a critical section, notifyStatus removes the task from "tasks".
2) Outside a critical section, notifyStatus calls taskRunner.shutdown
to let the task runner know it can clear out its data structures.
3) In a critical section, syncFromStorage adds the task back to "tasks",
because it is still present in metadata storage.
4) In a critical section, manageInternalCritical notices that the task
is in "tasks" and is not running in the taskRunner, so it launches
it again.
5) In a (different) critical section, notifyStatus updates the metadata
store to set the task status to SUCCESS.
6) The task continues running even though it should not be.
The possibility for this race was introduced in #12099, which shrunk
the critical section in notifyStatus. Prior to that patch, a single
critical section encompassed (1), (2), and (5), so the ordering above
was not possible.
This patch does the following:
1) Fixes the race by adding a recentlyCompletedTasks set that prevents
the main management loop from doing anything with tasks that are
currently being cleaned up.
2) Switches the order of the critical sections in notifyStatus, so
metadata store updates happen first. This is useful in case of
server failures: it ensures that if the Overlord fails in the midst
of notifyStatus, then completed-task statuses are still available in
ZK or on MMs for the next Overlord. (Those are cleaned up by
taskRunner.shutdown, which formerly ran first.) This isn't related
to the race described above, but is fixed opportunistically as part
of the same patch.
3) Changes the "tasks" list to a map. Many operations require retrieval
or removal of individual tasks; those are now O(1) instead of O(N)
in the number of running tasks.
4) Changes various log messages to use task ID instead of full task
payload, to make the logs more readable.
* Fix format string.
* Update comment.
Kinesis ingestion requires all shards to have at least 1 record at the required position in druid.
Even if this is satisified initially, resharding the stream can lead to empty intermediate shards. A significant delay in writing to newly created shards was also problematic.
Kinesis shard sequence numbers are big integers. Introduce two more custom sequence tokens UNREAD_TRIM_HORIZON and UNREAD_LATEST to indicate that a shard has not been read from and that it needs to be read from the start or the end respectively.
These values can be used to avoid the need to read at least one record to obtain a sequence number for ingesting a newly discovered shard.
If a record cannot be obtained immediately, use a marker to obtain the relevant shardIterator and use this shardIterator to obtain a valid sequence number. As long as a valid sequence number is not obtained, continue storing the token as the offset.
These tokens (UNREAD_TRIM_HORIZON and UNREAD_LATEST) are logically ordered to be earlier than any valid sequence number.
However, the ordering requires a few subtle changes to the existing mechanism for record sequence validation:
The sequence availability check ensures that the current offset is before the earliest available sequence in the shard. However, current token being an UNREAD token indicates that any sequence number in the shard is valid (despite the ordering)
Kinesis sequence numbers are inclusive i.e if current sequence == end sequence, there are more records left to read.
However, the equality check is exclusive when dealing with UNREAD tokens.
* Refactor Guice initialization
Builders for various module collections
Revise the extensions loader
Injector builders for server startup
Move Hadoop init to indexer
Clean up server node role filtering
Calcite test injector builder
* Revisions from review comments
* Build fixes
* Revisions from review comments
Few indexing tasks register RealtimeMetricsMonitor or TaskRealtimeMetricsMonitor with the process’s MonitorScheduler when they start. These monitors never unregister themselves (they always return true, they'd need to return false to unregister). Each of these monitors emits a set of metrics once every druid.monitoring.emissionPeriod.
As a result, after executing several tasks for a while, Indexer emits metrics of these tasks even after they're long gone.
Proposed Solution
Since one should be able to obtain the last round of ingestion metrics after the task unregisters the monitor, introducing lastRoundMetricsToBePushed variable to keep track of the same and overriding the AbstractMonitor.monitor method in RealtimeMetricsMonitor, TaskRealtimeMetricsMonitor to implement the new logic.
* Add EIGHT_HOUR into possible list of Granularities.
* Add the missing definition.
* fix test.
* Fix another test.
* Stylecheck finally passed.
Co-authored-by: Didip Kerabat <didip@apple.com>
* Mid-level service client and updated high-level clients.
Our servers talk to each other over HTTP. We have a low-level HTTP
client (HttpClient) that is super-asynchronous and super-customizable
through its handlers. It's also proven to be quite robust: we use it
for Broker -> Historical communication over the wide variety of query
types and workloads we support.
But the low-level client has no facilities for service location or
retries, which means we have a variety of high-level clients that
implement these in their own ways. Some high-level clients do a better
job than others. This patch adds a mid-level ServiceClient that makes
it easier for high-level clients to be built correctly and harmoniously,
and migrates some of the high-level logic to use ServiceClients.
Main changes:
1) Add ServiceClient org.apache.druid.rpc package. That package also
contains supporting stuff like ServiceLocator and RetryPolicy
interfaces, and a DiscoveryServiceLocator based on
DruidNodeDiscoveryProvider.
2) Add high-level OverlordClient in org.apache.druid.rpc.indexing.
3) Indexing task client creator in TaskServiceClients. It uses
SpecificTaskServiceLocator to find the tasks. This improves on
ClientInfoTaskProvider by caching task locations for up to 30 seconds
across calls, reducing load on the Overlord.
4) Rework ParallelIndexSupervisorTaskClient to use a ServiceClient
instead of extending IndexTaskClient.
5) Rework RemoteTaskActionClient to use a ServiceClient instead of
DruidLeaderClient.
6) Rework LocalIntermediaryDataManager, TaskMonitor, and
ParallelIndexSupervisorTask. As a result, MiddleManager, Peon, and
Overlord no longer need IndexingServiceClient (which internally used
DruidLeaderClient).
There are some concrete benefits over the prior logic, namely:
- DruidLeaderClient does retries in its "go" method, but only retries
exactly 5 times, does not sleep between retries, and does not retry
retryable HTTP codes like 502, 503, 504. (It only retries IOExceptions.)
ServiceClient handles retries in a more reasonable way.
- DruidLeaderClient's methods are all synchronous, whereas ServiceClient
methods are asynchronous. This is used in one place so far: the
SpecificTaskServiceLocator, so we don't need to block a thread trying
to locate a task. It can be used in other places in the future.
- HttpIndexingServiceClient does not properly handle all server errors.
In some cases, it tries to parse a server error as a successful
response (for example: in getTaskStatus).
- IndexTaskClient currently makes an Overlord call on every task-to-task
HTTP request, as a way to find where the target task is. ServiceClient,
through SpecificTaskServiceLocator, caches these target locations
for a period of time.
* Style adjustments.
* For the coverage.
* Adjustments.
* Better behaviors.
* Fixes.
* Poison StupidPool and fix resource leaks
There are various resource leaks from test setup as well as some
corners in query processing. We poison the StupidPool to start failing
tests when the leaks come and fix any issues uncovered from that so
that we can start from a clean baseline.
Unfortunately, because of how poisoning works,
we can only fail future checkouts from the same pool,
which means that there is a natural race between a
leak happening -> GC occurs -> leak detected -> pool poisoned.
This race means that, depending on interleaving of tests,
if the very last time that an object is checked out
from the pool leaks, then it won't get caught.
At some point in the future, something will catch it,
however and from that point on it will be deterministic.
* Remove various things left over from iterations
* Clean up FilterAnalysis and add javadoc on StupidPool
* Revert changes to .idea/misc.xml that accidentally got pushed
* Style and test branches
* Stylistic woes
The expiry timeout is compared against the current time but the condition is reversed.
This means that as soon as a supervisor task finishes, its partitions are cleaned up,
irrespective of the specified `intermediaryPartitionTimeout` period.
After these changes, the `intermediaryPartitionTimeout` will start getting honored.
Changes
* Fix the condition
* Add tests to verify the new correct behaviour
* Reduce the default expiry timeout from P1D to PT5M
to retain current behaviour in case of default configs.
* Fix flaky KafkaIndexTaskTest.
The testRunTransactionModeRollback case had many race conditions. Most notably,
it would commit a transaction and then immediately check to see that the results
were *not* indexed. This is racey because it relied on the indexing thread being
slower than the test thread.
Now, the case waits for the transaction to be processed by the indexing thread
before checking the results.
* Changes from review.
* Remove null and empty fields from native queries
* Test fixes
* Attempted IT fix.
* Revisions from review comments
* Build fixes resulting from changes suggested by reviews
* IT fix for changed segment size
The web-console (indirectly) calls the Overlord’s GET tasks API to fetch the tasks' summary which in turn queries the metadata tasks table. This query tries to fetch several columns, including payload, of all the rows at once. This introduces a significant memory overhead and can cause unresponsiveness or overlord failure when the ingestion tab is opened multiple times (due to several parallel calls to this API)
Another thing to note is that the task table (the payload column in particular) can be very large. Extracting large payloads from such tables can be very slow, leading to slow UI. While we are fixing the memory pressure in the overlord, we can also fix the slowness in UI caused by fetching large payloads from the table. Fetching large payloads also puts pressure on the metadata store as reported in the community (Metadata store query performance degrades as the tasks in druid_tasks table grows · Issue #12318 · apache/druid )
The task summaries returned as a response for the API are several times smaller and can fit comfortably in memory. So, there is an opportunity here to fix the memory usage, slow ingestion, and under-pressure metadata store by removing the need to handle large payloads in every layer we can. Of course, the solution becomes complex as we try to fix more layers. With that in mind, this page captures two approaches. They vary in complexity and also in the degree to which they fix the aforementioned problems.
* ForkingTaskRunner: Set ActiveProcessorCount for tasks.
This prevents various automatically-sized thread pools from being unreasonably
large (we don't want each task to size its pools as if it is the only thing on
the entire machine).
* Fix tests.
* Add missing LifecycleStart annotation.
* ForkingTaskRunner needs ManageLifecycle.
Often users are submitting queries, and ingestion specs that work only if the relevant extension is not loaded. However, the error is too technical for the users and doesn't suggest them to check for missing extensions. This PR modifies the error message so users can at least check their settings before assuming that the error is because of a bug.
* Emit state of replace and append for native batch tasks
* Emit count of one depending on batch ingestion mode (APPEND, OVERWRITE, REPLACE)
* Add metric to compaction job
* Avoid null ptr exc when null emitter
* Coverage
* Emit tombstone & segment counts
* Tasks need a type
* Spelling
* Integrate BatchIngestionMode in batch ingestion tasks functionality
* Typos
* Remove batch ingestion type from metric since it is already in a dimension. Move IngestionMode to AbstractTask to facilitate having mode as a dimension. Add metrics to streaming. Add missing coverage.
* Avoid inner class referenced by sub-class inspection. Refactor computation of IngestionMode to make it more robust to null IOConfig and fix test.
* Spelling
* Avoid polluting the Task interface
* Rename computeCompaction methods to avoid ambiguous java compiler error if they are passed null. Other minor cleanup.
* Deal with potential cardinality estimate being negative and add logging
* Fix typo in name
* Refine and minimize logging
* Make it info based on code review
* Create a named constant for the magic number
Issue:
Even though `CompactionTuningConfig` allows a `maxColumnsToMerge` config
(to optimize memory usage, particulary for datasources with many dimensions),
the corresponding client object `ClientCompactionTaskQueryTuningConfig`
(used by the coordinator duty `CompactSegments` to trigger auto-compaction)
does not contain this field. Thus, the value of `maxColumnsToMerge` specified
in any datasource compaction config is ignored.
Changes:
- Add field `maxColumnsToMerge` in `ClientCompactionTaskQueryTuningConfig`
and `UserCompactionTaskQueryTuningConfig`
- Fix tests
* RemoteTaskRunner: Fix NPE in streamTaskReports.
It is possible for a work item to drop out of runningTasks after the
ZkWorker is retrieved. In this case, the current code would throw
an NPE.
* Additional tests and additional fixes.
* Fix import.
1) Align "Assigning task" log messages between RTR and HRTR.
2) Remove confusing reference to "Coordinator".
3) Move "Not assigning task" message from INFO to DEBUG. It's not super
important to see this message: we mainly want to see what _does_ get
assigned.
4) Reword "Task switched from pending to running" message to better
match the structure of the "Assigning task" message from the same
method.
* Add builder for TaskToolbox.
The main purpose of this change is to make it easier to create
TaskToolboxes in tests. However, the builder is used in production
too, by TaskToolboxFactory.
* Fix imports, adjust formatting.
* Fix import.
Currently all Druid processes share the same log4j2 configuration file located in _common directory. Since peon processes are spawned by middle manager process, they derivate the environment variables from the middle manager. These variables include those in the log4j2.xml controlling to which file the logger writes the log.
But current task logging mechanism requires the peon processes to output the log to console so that the middle manager can redirect the console output to a file and upload this file to task log storage.
So, this PR imposes this requirement to peon processes, whatever the configuration is in the shared log4j2.xml, peon processes always write the log to console.
* concurrency: introduce GuardedBy to TaskQueue
* perf: Introduce TaskQueueScaleTest to test performance of TaskQueue with large task counts
This introduces a test case to confirm how long it will take to launch and manage (aka shutdown)
a large number of threads in the TaskQueue.
h/t to @gianm for main implementation.
* perf: improve scalability of TaskQueue with large task counts
* linter fixes, expand test coverage
* pr feedback suggestion; swap to different linter
* swap to use SuppressWarnings
* Fix TaskQueueScaleTest.
Co-authored-by: Gian Merlino <gian@imply.io>
Following up on #12315, which pushed most of the logic of building ImmutableBitmap into BitmapIndex in order to hide the details of how column indexes are implemented from the Filter implementations, this PR totally refashions how Filter consume indexes. The end result, while a rather dramatic reshuffling of the existing code, should be extraordinarily flexible, eventually allowing us to model any type of index we can imagine, and providing the machinery to build the filters that use them, while also allowing for other column implementations to implement the built-in index types to provide adapters to make use indexing in the current set filters that Druid provides.
This PR is to measure how long a task stays in the pending queue and emits the value with the metric task/pending/time. The metric is measured in RemoteTaskRunner and HttpRemoteTaskRunner.
An example of the metric:
```
2022-04-26T21:59:09,488 INFO [rtr-pending-tasks-runner-0] org.apache.druid.java.util.emitter.core.LoggingEmitter - {"feed":"metrics","timestamp":"2022-04-26T21:59:09.487Z","service":"druid/coordinator","host":"localhost:8081","version":"2022.02.0-iap-SNAPSHOT","metric":"task/pending/time","value":8,"dataSource":"wikipedia","taskId":"index_parallel_wikipedia_gecpcglg_2022-04-26T21:59:09.432Z","taskType":"index_parallel"}
```
------------------------------------------
Key changed/added classes in this PR
Emit metric task/pending/time in classes RemoteTaskRunner and HttpRemoteTaskRunner.
Update related factory classes and tests.
* Make tombstones ingestible by having them return an empty result set.
* Spotbug
* Coverage
* Coverage
* Remove unnecessary exception (checkstyle)
* Fix integration test and add one more to test dropExisting set to false over tombstones
* Force dropExisting to true in auto-compaction when the interval contains only tombstones
* Checkstyle, fix unit test
* Changed flag by mistake, fixing it
* Remove method from interface since this method is specific to only DruidSegmentInputentity
* Fix typo
* Adapt to latest code
* Update comments when only tombstones to compact
* Move empty iterator to a new DruidTombstoneSegmentReader
* Code review feedback
* Checkstyle
* Review feedback
* Coverage
* Optionally load segment index files into page cache on bootstrap and new segment download
* Fix unit test failure
* Fix test case
* fix spelling
* fix spelling
* fix test and test coverage issues
Co-authored-by: Jian Wang <wjhypo@gmail.com>
* add impl
* add impl
* fix checkstyle
* add impl
* add unit test
* fix stuff
* fix stuff
* fix stuff
* add unit test
* add more unit tests
* add more unit tests
* add IT
* add IT
* add IT
* add IT
* add ITs
* address comments
* fix test
* fix test
* fix test
* address comments
* address comments
* address comments
* fix conflict
* fix checkstyle
* address comments
* fix test
* fix checkstyle
* fix test
* fix test
* fix IT
The `javaOpts` property is being read from task context but not `javaOptsArray`.
Changes:
- Read `javaOptsArray` from task context in `ForkingTaskRunner`.
- Add test to verify that `javaOptsArray` in task context takes precedence over `javaOpts`
* Store null columns in the segments
* fix test
* remove NullNumericColumn and unused dependency
* fix compile failure
* use guava instead of apache commons
* split new tests
* unused imports
* address comments
Parallel indexing with range partitioning can often cause OOM in the
`ParallelIndexSupervisorTask` during the dimension distribution phase.
This typically happens because of too many `StringSketch` objects
obtained from the different `partial_dimension_distribution` sub-tasks.
We need not keep any of the sketches in memory until we need to compute
the PartitionBoundaries for the respective interval.
Changes
- Extract `StringDistribution` from `DimensionDistributionReport`s when they are received
and write to disk inside the task/temp/distributions
- After all the subtasks have finished, iterate over all the intervals one by one
- For each interval, read the distributions from disk, merge them and create `PartitionBoundaries`.
- Cleanup task/temp/distributions directory when all `PartitionBoundaries` have been determined
* finds complete and active tasks from the same snapshot
* overlord resource
* unit test
* integration test
* javadoc and cleanup
* more cleanup
* fix test and add more
* Tombstone support for replace functionality
* A used segment interval is the interval of a current used segment that overlaps any of the input intervals for the spec
* Update compaction test to match replace behavior
* Adapt ITAutoCompactionTest to work with tombstones rather than dropping segments. Add support for tombstones in the broker.
* Style plus simple queriableindex test
* Add segment cache loader tombstone test
* Add more tests
* Add a method to the LogicalSegment to test whether it has any data
* Test filter with some empty logical segments
* Refactor more compaction/dropexisting tests
* Code coverage
* Support for all empty segments
* Skip tombstones when looking-up broker's timeline. Discard changes made to tool chest to avoid empty segments since they will no longer have empty segments after lookup because we are skipping over them.
* Fix null ptr when segment does not have a queriable index
* Add support for empty replace interval (all input data has been filtered out)
* Fixed coverage & style
* Find tombstone versions from lock versions
* Test failures & style
* Interner was making this fail since the two segments were consider equal due to their id's being equal
* Cleanup tombstone version code
* Force timeChunkLock whenever replace (i.e. dropExisting=true) is being used
* Reject replace spec when input intervals are empty
* Documentation
* Style and unit test
* Restore test code deleted by mistake
* Allocate forces TIME_CHUNK locking and uses lock versions. TombstoneShardSpec added.
* Unused imports. Dead code. Test coverage.
* Coverage.
* Prevent killer from throwing an exception for tombstones. This is the killer used in the peon for killing segments.
* Fix OmniKiller + more test coverage.
* Tombstones are now marked using a shard spec
* Drop a segment factory.json in the segment cache for tombstones
* Style
* Style + coverage
* style
* Add TombstoneLoadSpec.class to mapper in test
* Update core/src/main/java/org/apache/druid/segment/loading/TombstoneLoadSpec.java
Typo
Co-authored-by: Jonathan Wei <jon-wei@users.noreply.github.com>
* Update docs/configuration/index.md
Missing
Co-authored-by: Jonathan Wei <jon-wei@users.noreply.github.com>
* Typo
* Integrated replace with an existing test since the replace part was redundant and more importantly, the test file was very close or exceeding the 10 min default "no output" CI Travis threshold.
* Range does not work with multi-dim
Co-authored-by: Jonathan Wei <jon-wei@users.noreply.github.com>
* Always reopen stream in FileUtils.copyLarge, RetryingInputStream.
When an InputStream throws an exception from one of its read methods,
we should assume it's bad and reopen it.
The main changes here are:
- In FileUtils.copyLarge, replace InputStream with InputStreamSupplier.
- In RetryingInputStream, collapse retryCondition and resetCondition
into a single condition. Also, make it required, since every usage
is passing in a specific condition anyway.
* Test fixes.
* Fix read impl.
* perf: improve ZkWorker task lookup performance
This improves the performance of the ZkWorker task lookup loop by
eliminating repeat calls to getRunningTasks() in toImmutable(),
and reduces the work performed in isRunningTask() to stream-parse
the id field instead of entire JSON blob.
Row stats are reported for single phase tasks in the `/liveReports` and `/rowStats` APIs
and are also a part of the overall task report. This commit adds changes to report
row stats for multiphase tasks too.
Changes:
- Add `TaskReport` in `GeneratedPartitionsReport` generated during hash and range partitioning
- Collect the reports for `index_generate` phase in `ParallelIndexSupervisorTask`
This PR aims to make the ParseExceptions in Druid more informative, by adding additional information (metadata) to the ParseException, which can contain additional information about the exception. For example - the path of the file generating the issue, the line number (where it can be easily fetched - like CsvReader)
Following changes are addressed in this PR:
A new class CloseableIteratorWithMetadata has been created which is like CloseableIterator but also has a metadata method that returns a context Map<String, Object> about the current element returned by next().
IntermediateRowParsingReader#read() now attaches the InputEntity and the "record number" which created the exception (while parsing them), and IntermediateRowParsingReader#sample attaches the InputEntity (but not the "record number").
TextReader (and its subclasses), which is a specific implementation of the IntermediateRowParsingReader also include the line number which caused the generation of the error.
This will also help in triaging the issues when InputSourceReader generates ParseException because it can point to the specific InputEntity which caused the exception (while trying to read it).
Mockito now supports all our needs and plays much better with recent Java versions.
Migrating to Mockito also simplifies running the kind of tests that required PowerMock in the past.
* replace all uses of powermock with mockito-inline
* upgrade mockito to 4.3.1 and fix use of deprecated methods
* import mockito bom to align all our mockito dependencies
* add powermock to forbidden-apis to avoid accidentally reintroducing it in the future
* upgrade Airline to Airline 2
https://github.com/airlift/airline is no longer maintained, updating to
https://github.com/rvesse/airline (Airline 2) to use an actively
maintained version, while minimizing breaking changes.
Note, this is a backwards incompatible change, and extensions relying on
the CliCommandCreator extension point will also need to be updated.
* fix dependency checks where jakarta.inject is now resolved first instead
of javax.inject, due to Airline 2 using jakarta
Problem:
- When a kinesis stream is resharded, the original shards are closed.
Any intermediate shard created in the process is eventually closed as well.
- If a shard is closed before any record is put into it, it can be safely ignored for ingestion.
- It is expensive to determine if a closed shard is empty, since it requires a call to the Kinesis cluster.
Changes:
- Maintain a cache of closed empty and closed non-empty shards in `KinesisSupervisor`
- Add config `skipIngorableShards` to `KinesisSupervisorTuningConfig`
- The caches are used and updated only when `skipIgnorableShards = true`
In extreme cases where many parallel indexing jobs are submitted together, it is possible
that the `ParallelIndexSupervisorTasks` take up all slots leaving no slot to schedule
their own sub-tasks thus stalling progress of all the indexing jobs.
Key changes:
- Add config `druid.indexer.runner.parallelIndexTaskSlotRatio` to limit the task slots
for `ParallelIndexSupervisorTasks` per worker
- `ratio = 1` implies supervisor tasks can use all slots on a worker if needed (default behavior)
- `ratio = 0` implies supervisor tasks can not use any slot on a worker
(actually, at least 1 slot is always available to ensure progress of parallel indexing jobs)
- `ImmutableWorkerInfo.canRunTask()`
- `WorkerHolder`, `ZkWorker`, `WorkerSelectUtils`
When `ParallelIndexSupervisorTask` converts `BucketNumberedShardSpecs`
to corresponding `BuildingShardSpecs`, the bucketId order gets lost.
Particularly, for range partitioning, this results in the partitionIds not being in the same order
as increasing partition boundaries.
Changes
- Refactor `ParallelIndexSupervisorTask.groupGenericPartitionLocationsPerPartition()`
* working
* Lazily load segmentKillers, segmentMovers, and segmentArchivers
* more tests
* test-jar plugin
* more coverage
* lazy client
* clean up changes
* checkstyle
* i did not change the branch condition
* adjust failure rate to run tests faster
* javadocs
* checkstyle
Fixes#12022
### Description
The current implementations of memory estimation in `OnHeapIncrementalIndex` and `StringDimensionIndexer` tend to over-estimate which leads to more persistence cycles than necessary.
This PR replaces the max estimation mechanism with getting the incremental memory used by the aggregator or indexer at each invocation of `aggregate` or `encode` respectively.
### Changes
- Add new flag `useMaxMemoryEstimates` in the task context. This overrides the same flag in DefaultTaskConfig i.e. `druid.indexer.task.default.context` map
- Add method `AggregatorFactory.factorizeWithSize()` that returns an `AggregatorAndSize` which contains
the aggregator instance and the estimated initial size of the aggregator
- Add method `Aggregator.aggregateWithSize()` which returns the incremental memory used by this aggregation step
- Update the method `DimensionIndexer.processRowValsToKeyComponent()` to return the encoded key component as well as its effective size in bytes
- Update `OnHeapIncrementalIndex` to use the new estimations only if `useMaxMemoryEstimates = false`
Fixed an issue where the provisionerService which can be used to spawn resources as needed is left running on a non-leader coordinator/overlord, after it is removed from leadership. Provisioning should only be done by the leader. To fix the issue, a call to stop the provisionerService was added to the stop() method of HttpRemoteTaskRunner class. The provisionerService was properly closed on other TaskRunner types.
This fixes a bug that causes TaskClient in overlord to continuously retry to pause tasks. This can happen when a task is not responding to the pause command. Ideally, in such a case when the task is unresponsive, the overlord would have given up after a few retries and would have killed the task. However, due to this bug, retries go on forever.
* Allow for appending tasks to co-exist with each other.
Add a config parameter for appending tasks to allow them to
use a SHARED lock. This will allow multiple appending tasks
to add segments to the same datasource at the same time.
This config should actually be the default, but it is added
as a config to enable a smooth transition/validation in
production settings before forcing it as the default
behavior going forward.
This change leverages the TaskLockType.SHARED that existed
previously, this used to carry the semantics of a READ lock,
which was "escalated" when the task wanted to actually
persist the segment. As of many moons before this diff, the
SHARED lock had stopped being used but was still piped into
the code. It turns out that with a few tweaks, it can be
adjusted to be a shared lock for append tasks to allow them
all to write to the same datasource, so that is what this does.
* Can only reuse the shared lock if using the same groupId
* Need to serialize out the task lock type
* Adjust Unit tests to expect new field in JSON
* Enable allocating segments at ALL granularity.
The main change is that Granularity.granularitiesFinerThan will return ALL if ALL
is passed in.
Allocating segments at ALL granularity is somewhat unconventional, but there
is nothing wrong with it, and it actually makes a lot of sense for tables that
are meant to be used for lookups or dimensions rather than main fact tables.
This change enables ALL segmentGranularity to work properly in appendToExisting
mode.
Also clarifies behavior in javadocs and tests.
* Move tests to improve coverage.
* Enhancements to IndexTaskClient.
1) Ability to use handlers other than StringFullResponseHandler. This
functionality is not used in production code yet, but is useful
because it will allow tasks to communicate with each other in
non-string-based formats and in streaming fashion. In the future,
we'll be able to use this to make task-to-task communication
more efficient.
2) Truncate server errors at 1KB, so long errors do not pollute logs.
3) Change error log level for retryable errors from WARN to INFO. (The
final error is still WARN.)
4) Harmonize log and exception messages to have a more consistent format.
* Additional tests and improvements.
* Code cleanup from query profile project
* Fix spelling errors
* Fix Javadoc formatting
* Abstract out repeated test code
* Reuse constants in place of some string literals
* Fix up some parameterized types
* Reduce warnings reported by Eclipse
* Reverted change due to lack of tests
* Use intermediate-persist IndexSpec during multiphase merge.
The main change is the addition of an intermediate-persist IndexSpec
to the main "merge" method in IndexMerger. There are also a few minor
adjustments to the IndexMerger interface to encourage more harmonious
usage of its methods in the future.
* Additional changes inspired by the test coverage checker.
- Remove unused-in-production IndexMerger methods "append" and "convert".
- Add additional unit tests to UnifiedIndexerAppenderatorsManager.
* Additional adjustments.
* Even more additional adjustments.
* Test fixes.
* Use 404 instead of 400
* Use 404 instead of 400
* Add UT test cases
* Add IT testcases
* add UT for task resource filter
Signed-off-by: frank chen <frank.chen021@outlook.com>
* Using org.testing.Assert instead of org.junit.Assert
* Resolve comments and fix test
* Fix test
* Fix tests
* Resolve comments
Add the ability to pass time column in first/last aggregator (and latest/earliest SQL functions). It is to support cases where the time to query upon is stored as a part of a column different than __time. Also, some other logical time column can be specified.
* Consolidate a bunch of ad-hoc segments metadata SQL; fix some bugs.
This patch gathers together a variety of SQL from SqlSegmentsMetadataManager
and IndexerSQLMetadataStorageCoordinator into a new class SqlSegmentsMetadataQuery.
It focuses on SQL related to retrieving segment payloads and marking
segments used and unused.
In addition to cleaning up the code a bit, this patch also fixes a bug
with years before 0 or after 9999. The prior SQL did not work properly
because dates outside this range cannot be compared as strings. The new
code does work for these far-past and far-future years.
So, if you're ever interested in using Druid to analyze things from
ancient Babylon, you better apply this patch first!
* Fix test compiling.
* Fixes and improvements.
* Fix forbidden API.
* Additional fixes.
Simplifies logic for callers that only want to get a list of all the
column names, or column names and types. Updated callers SegmentAnalyzer,
HashJoinSegmentStorageAdapter, and DruidSegmentReader.
* add impl
* fix checkstyle
* add test
* add test
* add unit tests
* fix unit tests
* fix unit tests
* fix unit tests
* add IT
* add IT
* add comments
* fix spelling
This PR adds support for handling null dimension values while creating partition boundaries
in range partitioning.
This means that we can now have partition boundaries like [null, "abc"] or ["abc", null, "def"].
* add back and deprecate aggregator factory methods so i can say i told you so when i delete these later
* rename to make less ambiguous, fix fill method
* adjust
* Scan: Add "orderBy" parameter.
This patch adds an API for requesting non-time orderings, although it
does not actually add the ability to execute such queries.
The changes are done in such a way that no matter how Scan query objects
are constructed, they will have a correct "getOrderBy". This will enable
us to switch the execution to exclusively use "getOrderBy" later on when
it's implemented.
Scan queries are serialized such that they only include "order" (time
order) if the ordering is time-based, and they only include "orderBy" if
the ordering is non-time-based. This maximizes compatibility with
the existing API while also providing a clean look for formatted queries.
Because this patch does not include execution logic, if someone actually
tries to run a query with non-time ordering, then they will get an error
like "Cannot execute query with orderBy [quality ASC]".
* SQL module fixes.
* Add spotbugs-exclude.
* Remove unused method.
* Add worker category as dimension in TaskSlotCountStatsMonitor
* Change description
* Add workerConfig as field
* Modify HttpRemoteTaskRunnerTest to test worker category in taskslot metrics
* Fixing tests
* Fixing alerts
* Adding unit test in SingleTaskBackgroundRunnerTest for task slot metrics APIs
* Resolving false positive spell check
* addressing comments
* throw UnsupportedOperationException for tasklotmetrics APIs in SingleTaskBackgroundRunner
Co-authored-by: Nikhil Navadiya <nnavadiya@twitter.com>
Add method ShardSpec.getType() to get name of shard spec type
List all names of shard spec types in the interface ShardSpec itself
for easy reference and maintenance
Add dimension partitioningType to metric segment/added/bytes
This PR adds support for range partitioning on multiple dimensions. It extends on the
concept and implementation of single dimension range partitioning.
The new partition type added is range which corresponds to a set of Dimension Range Partition classes. single_dim is now treated as a range type partition with a single partition dimension.
The start and end values of a DimensionRangeShardSpec are represented
by StringTuples, where each String in the tuple is the value of a partition dimension.
Add support for hadoop 3 profiles . Most of the details are captured in #11791 .
We use a combination of maven profiles and resource filtering to achieve this. Hadoop2 is supported by default and a new maven profile with the name hadoop3 is created. This will allow the user to choose the profile which is best suited for the use case.
* Fix indefinite WAITING batch task when lock is revoked
* Use revoked property on TaskLock
* Update TimeChunkLockAcquireAction to return TaskLock for revoked locks
* Revert "Require Datasource WRITE authorization for Supervisor and Task access (#11718)"
This reverts commit f2d6100124.
* Revert "Require DATASOURCE WRITE access in SupervisorResourceFilter and TaskResourceFilter (#11680)"
This reverts commit 6779c4652d.
* Fix docs for the reverted commits
* Fix and restore deleted tests
* Fix and restore SystemSchemaTest
* Remove CloseQuietly and migrate its usages to other methods.
These other methods include:
1) New method CloseableUtils.closeAndWrapExceptions, which wraps IOExceptions
in RuntimeExceptions for callers that just want to avoid dealing with
checked exceptions. Most usages were migrated to this method, because it
looks like they were mainly attempts to avoid declaring a throws clause,
and perhaps were unintentionally suppressing IOExceptions.
2) New method CloseableUtils.closeInCatch, designed to properly close something
in a catch block without losing exceptions. Some usages from catch blocks
were migrated here, when it seemed that they were intended to avoid checked
exception handling, and did not really intend to also suppress IOExceptions.
3) New method CloseableUtils.closeAndSuppressExceptions, which sends all
exceptions to a "chomper" that consumes them. Nothing is thrown or returned.
The behavior is slightly different: with this method, _all_ exceptions are
suppressed, not just IOExceptions. Calls that seemed like they had good
reason to suppress exceptions were migrated here.
4) Some calls were migrated to try-with-resources, in cases where it appeared
that CloseQuietly was being used to avoid throwing an exception in a finally
block.
🎵 You don't have to go home, but you can't stay here... 🎵
* Remove unused import.
* Fix up various issues.
* Adjustments to tests.
* Fix null handling.
* Additional test.
* Adjustments from review.
* Fixup style stuff.
* Fix NPE caused by holder starting out null.
* Fix spelling.
* Chomp Throwables too.
* better type system
* needle in a haystack
* ColumnCapabilities is a TypeSignature instead of having one, INFORMATION_SCHEMA support
* fixup merge
* more test
* fixup
* intern
* fix
* oops
* oops again
* ...
* more test coverage
* fix error message
* adjust interning, more javadocs
* oops
* more docs more better
Follow up PR for #11680
Description
Supervisor and Task APIs are related to ingestion and must always require Datasource WRITE
authorization even if they are purely informative.
Changes
Check Datasource WRITE in SystemSchema for tables "supervisors" and "tasks"
Check Datasource WRITE for APIs /supervisor/history and /supervisor/{id}/history
Check Datasource for all Indexing Task APIs
* Add handoff wait time to ingestion stats report. Refactor some code for batch handoff
* fix checkstyle
* Add assertion to AbstractITBatchIndexTask to make sure report reflects wait for segments happened
* add docs to the task reports section of doc
* Make persists concurrent with ingestion
* Remove semaphore but keep concurrent persists (with add) and add push in the backround as well
* Go back to documented default persists (zero)
* Move to debug
* Remove unnecessary Atomics
* Comments on synchronization (or not) for sinks & sinkMetadata
* Some cleanup for unit tests but they still need further work
* Shutdown & wait for persists and push on close
* Provide support for three existing batch appenderators using batchProcessingMode flag
* Fix reference to wrong appenderator
* Fix doc typos
* Add BatchAppenderators class test coverage
* Add log message to batchProcessingMode final value, fix typo in enum name
* Another typo and minor fix to log message
* LEGACY->OPEN_SEGMENTS, Edit docs
* Minor update legacy->open segments log message
* More code comments, mostly small adjustments to naming etc
* fix spelling
* Exclude BtachAppenderators from Jacoco since it is fully tested but Jacoco still refuses to ack coverage
* Coverage for Appenderators & BatchAppenderators, name change of a method that was still using "legacy" rather than "openSegments"
Co-authored-by: Clint Wylie <cjwylie@gmail.com>
Fixes#11297.
Description
Description and design in the proposal #11297
Key changed/added classes in this PR
*DataSegmentPusher
*ShuffleClient
*PartitionStat
*PartitionLocation
*IntermediaryDataManager
Gian Merlino
AmatyaAvadhanula
Rohan Garg
Clint Wylie
Tejaswini Bandlamudi
Jonathan Wei
Dr. Sizzles
Kashif Faraz
Laksh Singla
Abhishek Agarwal
Karan Kumar
Adarsh Sanjeev
Herb Brewer
Paul Rogers
刘小辉
Maytas Monsereenusorn
Didip Kerabat
imply-cheddar
Agustin Gonzalez
superivaj
Frank Chen
Jason Koch
zachjsh
Rocky Chen
Jihoon Son
Parag Jain
AmatyaAvadhanula
Gian Merlino
Frank Chen
Samarth Jain
Laksh Singla
Xavier Léauté
Lucas Capistrant
Nikhil Navadiya
Liran Funaro
David Bar