* Fixing failing compaction/parallel index jobs during upgrade due to new actions not available on the overlord.
* Fixing build
* Removing extra space.
* Fixing json getter.
* Review comments.
* Fix NPE caused by realtime segment closing race, fix possible missing-segment retry bug.
Fixes#12168, by returning empty from FireHydrant when the segment is
swapped to null. This causes the SinkQuerySegmentWalker to use
ReportTimelineMissingSegmentQueryRunner, which causes the Broker to look
for the segment somewhere else.
In addition, this patch changes SinkQuerySegmentWalker to acquire references
to all hydrants (subsegments of a sink) at once, and return a
ReportTimelineMissingSegmentQueryRunner if *any* of them could not be acquired.
I suspect, although have not confirmed, that the prior behavior could lead to
segments being reported as missing even though results from some hydrants were
still included.
* Some more test coverage.
* Make numCorePartitions as 0 in the TombstoneShardSpec.
* fix up test
* Add tombstone core partition tests
* review comment
* Need to register the test shard type to make jackson happy
In pull request #14985, a bug was introduced where periodic refresh would skip rebuilding a datasource's schema after encountering a non-existent datasource. This resulted in remaining datasources having stale schema information.
This change addresses the bug and adds a unit test to validate the refresh mechanism's behaviour when a datasource is removed, and other datasources have schema changes.
* Add a unit test that fails when used segments with too many intervals are retrieved.
- This is a failing test case that needs to be ignored.
* Batch the intervals (use 100 as it's consistent with batching in other places).
* move the filtering inside the batch
* Account for limit cross the batch splits.
* Adjustments
* Fixup and add tests
* small refactor
* add more tests.
* remove wrapper.
* Minor edits
* assert out of range
In the current design, brokers query both data nodes and tasks to fetch the schema of the segments they serve. The table schema is then constructed by combining the schemas of all segments within a datasource. However, this approach leads to a high number of segment metadata queries during broker startup, resulting in slow startup times and various issues outlined in the design proposal.
To address these challenges, we propose centralizing the table schema management process within the coordinator. This change is the first step in that direction. In the new arrangement, the coordinator will take on the responsibility of querying both data nodes and tasks to fetch segment schema and subsequently building the table schema. Brokers will now simply query the Coordinator to fetch table schema. Importantly, brokers will still retain the capability to build table schemas if the need arises, ensuring both flexibility and resilience.
* Use filters for pruning properly for hash-joins.
Native used them too aggressively: it might use filters for the RHS
to prune the LHS. MSQ used them not at all. Now, both use them properly,
pruning based on base (LHS) columns only.
* Fix tests.
* Fix style.
* Clear filterFields too.
* Update.
* Add system fields to input sources.
Main changes:
1) The SystemField enum defines system fields "__file_uri", "__file_path",
and "__file_bucket". They are associated with each input entity.
2) The SystemFieldInputSource interface can be added to any InputSource
to make it system-field-capable. It sets up serialization of a list
of configured "systemFields" in the JSON form of the input source, and
provides a method getSystemFieldValue for computing the value of each
system field. Cloud object, HDFS, HTTP, and Local now have this.
* Fix various LocalInputSource calls.
* Fix style stuff.
* Fixups.
* Fix tests and coverage.
ServiceClientImpl logs the cause of every retry, even though we are retrying the connection attempt. This leads to slight pollution in the logs because a lot of the time, the reason for retrying is the same. This is seen primarily in MSQ, when the worker task hasn't launched yet however controller attempts to connect to the worker task, which can lead to scary-looking messages (with INFO log level), even though they are normal.
This PR changes the logging logic to log every 10 (arbitrary number) retries instead of every retry, to reduce the pollution of the logs.
Note: If there are no retries left, the client returns an exception, which would get thrown up by the caller, and therefore this change doesn't hide any important information.
* Use min of scheduler threads and server threads for subquery guardrails.
This allows more memory to be used for subqueries when the query scheduler
is configured to limit queries below the number of server threads. The patch
also refactors the code so SubqueryGuardrailHelper is provided by a Guice
Provider rather than being created by ClientQuerySegmentWalker, to achieve
better separation of concerns.
* Exclude provider from coverage.
* Frames: consider writing singly-valued column when input column hasMultipleValues is UNKNOWN.
Prior to this patch, columnar frames would always write multi-valued columns if
the input column had hasMultipleValues = UNKNOWN. This had the effect of flipping
UNKNOWN to TRUE when copying data into frames, which is problematic because TRUE
causes expressions to assume that string inputs must be treated as arrays.
We now avoid this by flipping UNKNOWN to FALSE if no multi-valuedness
is encountered, and flipping it to TRUE if multi-valuedness is encountered.
* Add regression test case.
Currently the inter Druid communication via rest endpoints is based on json formatted payload. Upon parsing error, there is only a generic exception stating expected json token type and current json token type. There is no detailed error log about the content of the payload causing the violation.
In the micro-service world, the trend is to deploy the Druid servers in k8 with the mesh network. Often the istio proxy or other proxies is used to intercept the network connection between Druid servers. The proxy may give error messages for various reasons. These error messages are not expected by the json parser. The generic error message from Druid can be very misleading as the user may think the message is based on the response from the other Druid server.
For example, this is an example of mysterious error message
QueryInterruptedException{msg=Next token wasn't a START_ARRAY, was[VALUE_STRING] from url[http://xxxxx:8088/druid/v2/], code=Unknown exception, class=org.apache.druid.java.util.common.IAE, host=xxxxx:8088}"
While the context of the message is the following from the proxy when it can't tunnel the network connection.
pstream connect error or disconnect/reset before header
So this very simple PR is just to enhance the logging and get the real underlying message printed out. This would save a lot of head scratching time if Druid is deployed with mesh network.
Co-authored-by: Kai Sun <kai.sun@salesforce.com>
This PR aims to add the capabilities to:
1. Fetch the realtime segment metadata from the coordinator server view,
2. Adds the ability for workers to query indexers, similar to how brokers do the same for native queries.
This PR updates the library used for Memcached client to AWS Elasticache Client : https://github.com/awslabs/aws-elasticache-cluster-client-memcached-for-java
This enables us to use the option of encrypting data in transit:
Amazon ElastiCache for Memcached now supports encryption of data in transit
For clusters running the Memcached engine, ElastiCache supports Auto Discovery—the ability for client programs to automatically identify all of the nodes in a cache cluster, and to initiate and maintain connections to all of these nodes.
Benefits of Auto Discovery - Amazon ElastiCache
AWS has forked spymemcached 2.12.1, and has since added all the patches included in 2.12.2 and 2.12.3 as part of the 1.2.0 release. So, this can now be considered as an equivalent drop-in replacement.
GitHub - awslabs/aws-elasticache-cluster-client-memcached-for-java: Amazon ElastiCache Cluster Client for Java - enhanced library to connect to ElastiCache clusters.
https://docs.aws.amazon.com/AWSJavaSDK/latest/javadoc/com/amazonaws/services/elasticache/AmazonElastiCacheClient.html#AmazonElastiCacheClient--
How to enable TLS with Elasticache
On server side:
https://docs.aws.amazon.com/AmazonElastiCache/latest/mem-ug/in-transit-encryption-mc.html#in-transit-encryption-enable-existing-mc
On client side:
GitHub - awslabs/aws-elasticache-cluster-client-memcached-for-java: Amazon ElastiCache Cluster Client for Java - enhanced library to connect to ElastiCache clusters.
The aggregators had incorrect types for getResultType when shouldFinalze
is false. They had the finalized type, but they should have had the
intermediate type.
Also includes a refactor of how ExprMacroTable is handled in tests, to make
it easier to add tests for this to the MSQ module. The bug was originally
noticed because the incorrect result types caused MSQ queries with DS_HLL
to behave erratically.
Changes:
- Add task context parameter `taskLockType`. This determines the type of lock used by a batch task.
- Add new task actions for transactional replace and append of segments
- Add methods StorageCoordinator.commitAppendSegments and commitReplaceSegments
- Upgrade segments to appropriate versions when performing replace and append
- Add new metadata table `upgradeSegments` to track segments that need to be upgraded
- Add tests
- Add `KillTaskReport` that contains stats for `numSegmentsKilled`,
`numBatchesProcessed`, `numSegmentsMarkedAsUnused`
- Fix bug where exception message had no formatter but was was still being passed some args.
- Add some comments regarding deprecation of `markAsUnused` flag.
This commit pulls out some changes from #14407 to simplify that PR.
Changes:
- Rename `IndexerMetadataStorageCoordinator.announceHistoricalSegments` to `commitSegments`
- Rename the overloaded method to `commitSegmentsAndMetadata`
- Fix some typos
When materializing the results as frames, we defer the creation of the frames in ScanQueryQueryToolChest, which passes through the catch-all block reserved for catching cases when we don't have the complete row signature in the query (and falls back to the old code).
This PR aims to resolve it by adding the frame generation code to the try-catch block we have at the outer level.
Changes:
- Move following configs from `CliCoordinator` to `DruidCoordinatorConfig`:
- `druid.coordinator.kill.on`
- `druid.coordinator.kill.pendingSegments.on`
- `druid.coordinator.kill.supervisors.on`
- `druid.coordinator.kill.rules.on`
- `druid.coordinator.kill.audit.on`
- `druid.coordinator.kill.datasource.on`
- `druid.coordinator.kill.compaction.on`
- In the Coordinator style used by historical management duties, always instantiate all
the metadata cleanup duties but execute only if enabled. In the existing code, they are
instantiated only when enabled by using optional binding with Guice.
- Add a wrapper `MetadataManager` which contains handles to all the different
metadata managers for rules, supervisors, segments, etc.
- Add a `CoordinatorConfigManager` to simplify read and update of coordinator configs
- Remove persistence related methods from `CoordinatorCompactionConfig` and
`CoordinatorDynamicConfig` as these are config classes.
- Remove annotations `@CoordinatorIndexingServiceDuty`,
`@CoordinatorMetadataStoreManagementDuty`
changes:
* add back nested column v4 serializers
* 'json' schema by default still uses the newer 'nested common format' used by 'auto', but now has an optional 'formatVersion' property which can be specified to override format versions on native ingest jobs
* add system config to specify default column format stuff, 'druid.indexing.formats', and property 'druid.indexing.formats.nestedColumnFormatVersion' to specify system level preferred nested column format for friendly rolling upgrades from versions which do not support the newer 'nested common format' used by 'auto'
Changes:
- Add new metric `kill/pendingSegments/count` with dimension `dataSource`
- Add tests for `KillStalePendingSegments`
- Reduce no-op logs that spit out for each datasource even when no pending
segments have been deleted. This can get particularly noisy at low values of `indexingPeriod`.
- Refactor the code in `KillStalePendingSegments` for readability and add javadocs
A new monitor SubqueryCountStatsMonitor which emits the metrics corresponding to the subqueries and their execution is now introduced. Moreover, the user can now also use the auto mode to automatically set the number of bytes available per query for the inlining of its subquery's results.
Currently, after an MSQ query, the web console is responsible for waiting for the segments to load. It does so by checking if there are any segments loading into the datasource ingested into, which can cause some issues, like in cases where the segments would never be loaded, or would end up waiting for other ingests as well.
This PR shifts this responsibility to the controller, which would have the list of segments created.
Changes:
[A] Remove config `decommissioningMaxPercentOfMaxSegmentsToMove`
- It is a complicated config 😅 ,
- It is always desirable to prioritize move from decommissioning servers so that
they can be terminated quickly, so this should always be 100%
- It is already handled by `smartSegmentLoading` (enabled by default)
[B] Remove config `maxNonPrimaryReplicantsToLoad`
This was added in #11135 to address two requirements:
- Prevent coordinator runs from getting stuck assigning too many segments to historicals
- Prevent load of replicas from competing with load of unavailable segments
Both of these requirements are now already met thanks to:
- Round-robin segment assignment
- Prioritization in the new coordinator
- Modifications to `replicationThrottleLimit`
- `smartSegmentLoading` (enabled by default)
Changes:
- Make ServiceMetricEvent.Builder extend ServiceEventBuilder<ServiceMetricEvent>
and thus convert it to a plain builder rather than a builder of builder.
- Add methods setCreatedTime , setMetricAndValue to the builder
Changes:
- Reduce log level of some coordinator stats, which only denote normal coordinator operation.
These stats are still emitted and can be logged by setting debugDimensions in the coordinator
dynamic config.
- Initialize SegmentLoadingConfig only for historical management duties. This config is not
needed in other duties and initializing it creates logs which are misleading.
Changes
- Increase value of `replicationThrottleLimit` computed by `smartSegmentLoading` from
2% to 5% of total number of used segments.
- Assign replicas to a tier even when some replicas are already being loaded in that tier
- Limit the total number of replicas in load queue at start of run + replica assignments in
the run to the `replicationThrottleLimit`.
i.e. for every tier,
num loading replicas at start of run + num replicas assigned in run <= replicationThrottleLimit
Changes:
- Determine the default value of balancerComputeThreads based on number of
coordinator cpus rather than number of segments. Even if the number of segments
is low and we create more balancer threads, it doesn't hurt the system as threads
would mostly be idle.
- Remove unused field from SegmentLoadQueueManager
Expected values:
- Clusters with ~1M segments typically work with Coordinators having 16 cores or more.
This would give us 8 balancer threads, which is the same as the current maximum.
- On small clusters, even a single thread is enough to do the required balancing work.
### Description
This change enables the `KillUnusedSegments` coordinator duty to be scheduled continuously. Things that prevented this, or made this difficult before were the following:
1. If scheduled at fast enough rate, the duty would find the same intervals to kill for the same datasources, while kill tasks submitted for those same datasources and intervals were already underway, thus wasting task slots on duplicated work.
2. The task resources used by auto kill were previously unbounded. Each duty run period, if unused
segments were found for any datasource, a kill task would be submitted to kill them.
This pr solves for both of these issues:
1. The duty keeps track of the end time of the last interval found when killing unused segments for each datasource, in a in memory map. The end time for each datasource, if found, is used as the start time lower bound, when searching for unused intervals for that same datasource. Each duty run, we remove any datasource keys from this map that are no longer found to match datasources in the system, or in whitelist, and also remove a datasource entry, if there is found to be no unused segments for the datasource, which happens when we fail to find an interval which includes unused segments. Removing the datasource entry from the map, allows for searching for unusedSegments in the datasource from the beginning of time once again
2. The unbounded task resource usage can be mitigated with coordinator dynamic config added as part of ba957a9b97
Operators can configure continous auto kill by providing coordinator runtime properties similar to the following:
```
druid.coordinator.period.indexingPeriod=PT60S
druid.coordinator.kill.period=PT60S
```
And providing sensible limits to the killTask usage via coordinator dynamic properties.
There is a current issue due to inconsistent metadata between worker and controller in MSQ. A controller can receive one set of segments, which are then marked as unused by, say, a compaction job. The worker would be unable to get the segment information as MetadataResource.
Motivation:
- Clean up `DruidCoordinator` and move methods to classes where they are most relevant
Changes:
- No functional change
- Add duty `PrepareBalancerAndLoadQueues` to replace `UpdateCoordinatorState`
- Move map of `LoadQueuePeon` from `DruidCoordinator` to `LoadQueueTaskMaster`
- Make `BalancerStrategyFactory` an abstract class and keep the balancer executor here
- Move reporting of used segment stats and historical capacity stats from
`CollectSegmentAndServerStats` to `PrepareBalancerAndLoadQueues`
- Move reporting of unavailable and under-replicated segment stats from
`CollectSegmentAndServerStats` to `UpdateReplicationStatus` duty
Currently, Druid is using Guava 16.0.1 version. This upgrade to 31.1-jre fixes the following issues.
CVE-2018-10237 (Unbounded memory allocation in Google Guava 11.0 through 24.x before 24.1.1 allows remote attackers to conduct denial of service attacks against servers that depend on this library and deserialize attacker-provided data because the AtomicDoubleArray class (when serialized with Java serialization) and the CompoundOrdering class (when serialized with GWT serialization) perform eager allocation without appropriate checks on what a client has sent and whether the data size is reasonable). We don't use Java or GWT serializations. Despite being false positive they're causing red security scans on Druid distribution.
Latest version of google-client-api is incompatible with the existing Guava version. This PR unblocks Update google client apis to latest version #14414
Motivation:
- There is no usage of the `SegmentTransactionInsertAction` which passes a
non-null non-empty value of `segmentsToBeDropped`.
- This is not really needed either as overshadowed segments are marked as unused
by the Coordinator and need not be done in the same transaction as committing segments.
- It will also help simplify the changes being made in #14407
Changes:
- Remove `segmentsToBeDropped` from the task action and all intermediate methods
- Remove related tests which are not needed anymore
Changes:
- Move logic of `NewestSegmentFirstIterator.needsCompaction` to `CompactionStatus`
to improve testability and readability
- Capture the list of checks performed to determine if compaction is needed in a readable
manner in `CompactionStatus.CHECKS`
- Make `CompactionSegmentIterator` iterate over instances of `SegmentsToCompact`
instead of `List<DataSegment>`. This allows use of the `umbrellaInterval` later.
- Replace usages of `QueueEntry` with `SegmentsToCompact`
- Move `SegmentsToCompact` out of `NewestSegmentFirstIterator`
- Simplify `CompactionStatistics`
- Reduce level of less important logs to debug
- No change made to tests to ensure correctness
Changes:
- Use separate executor for every duty group
- This change is thread-safe as every duty group uses its own copy of
`DruidCoordinatorRuntimeParams` and does not share any other mutable instances
with other duty groups.
- With the exception of `HistoricalManagementDuties`, duty groups are typically not
very compute intensive and mostly perform database or HTTP I/O. So, coordinator
resources would still mostly be available for `HistoricalManagementDuties`.
Follow up changes to #12599
Changes:
- Rename column `used_flag_last_updated` to `used_status_last_updated`
- Remove new CLI tool `UpdateTables`.
- We already have a `CreateTables` with similar functionality, which should be able to
handle update cases too.
- Any user running the cluster for the first time should either just have `connector.createTables`
enabled or run `CreateTables` which should create tables at the latest version.
- For instance, the `UpdateTables` tool would be inadequate when a new metadata table has
been added to Druid, and users would have to run `CreateTables` anyway.
- Remove `upgrade-prep.md` and include that info in `metadata-init.md`.
- Fix log messages to adhere to Druid style
- Use lambdas
* Add new configurable buffer period to create gap between mark unused and kill of segment
* Changes after testing
* fixes and improvements
* changes after initial self review
* self review changes
* update sql statement that was lacking last_used
* shore up some code in SqlMetadataConnector after self review
* fix derby compatibility and improve testing/docs
* fix checkstyle violations
* Fixes post merge with master
* add some unit tests to improve coverage
* ignore test coverage on new UpdateTools cli tool
* another attempt to ignore UpdateTables in coverage check
* change column name to used_flag_last_updated
* fix a method signature after column name switch
* update docs spelling
* Update spelling dictionary
* Fixing up docs/spelling and integrating altering tasks table with my alteration code
* Update NULL values for used_flag_last_updated in the background
* Remove logic to allow segs with null used_flag_last_updated to be killed regardless of bufferPeriod
* remove unneeded things now that the new column is automatically updated
* Test new background row updater method
* fix broken tests
* fix create table statement
* cleanup DDL formatting
* Revert adding columns to entry table by default
* fix compilation issues after merge with master
* discovered and fixed metastore inserts that were breaking integration tests
* fixup forgotten insert by using pattern of sharing now timestamp across columns
* fix issue introduced by merge
* fixup after merge with master
* add some directions to docs in the case of segment table validation issues
* Add supervisor /resetOffsets API.
- Add a new endpoint /druid/indexer/v1/supervisor/<supervisorId>/resetOffsets
which accepts DataSourceMetadata as a body parameter.
- Update logs, unit tests and docs.
* Add a new interface method for backwards compatibility.
* Rename
* Adjust tests and javadocs.
* Use CoreInjectorBuilder instead of deprecated makeInjectorWithModules
* UT fix
* Doc updates.
* remove extraneous debugging logs.
* Remove the boolean setting; only ResetHandle() and resetInternal()
* Relax constraints and add a new ResetOffsetsNotice; cleanup old logic.
* A separate ResetOffsetsNotice and some cleanup.
* Minor cleanup
* Add a check & test to verify that sequence numbers are only of type SeekableStreamEndSequenceNumbers
* Add unit tests for the no op implementations for test coverage
* CodeQL fix
* checkstyle from merge conflict
* Doc changes
* DOCUSAURUS code tabs fix. Thanks, Brian!
Changes:
- No change in behaviour if `smartSegmentLoading` is disabled
- If `smartSegmentLoading` is enabled
- Compute `balancerComputeThreads` based on `numUsedSegments`
- Compute `maxSegmentsToMove` based on `balancerComputeThreads`
- Compute `segmentsToMoveToFixSkew` based on usage skew
- Compute `segmentsToMove = Math.min(maxSegmentsToMove, segmentsToMoveToFixSkew)`
Limits:
- 1 <= `balancerComputeThreads` <= 8
- `maxSegmentsToMove` <= 20% of total segments
- `minSegmentsToMove` = 0.15% of total segments
`cachingCost` has been deprecated in #14484 and is not advised to be used in
production clusters as it may cause usage skew across historicals which the
coordinator is unable to rectify. This PR completely disables `cachingCost` strategy
as it has now been rendered redundant due to recent performance improvements
made to `cost` strategy.
Changes
- Disable `cachingCost` strategy
- Add `DisabledCachingCostBalancerStrategyFactory` for the time being so that we
can give a proper error message before falling back to `CostBalancerStrategy`. This
will be removed in subsequent releases.
- Retain `CachingCostBalancerStrategy` for testing/benchmarking purposes.
- Add javadocs to `DiskNormalizedCostBalancerStrategy`
### Description
Added the following metrics, which are calculated from the `KillUnusedSegments` coordinatorDuty
`"killTask/availableSlot/count"`: calculates the number remaining task slots available for auto kill
`"killTask/maxSlot/count"`: calculates the maximum number of tasks available for auto kill
`"killTask/task/count"`: calculates the number of tasks submitted by auto kill.
#### Release note
NEW: metrics added for auto kill
`"killTask/availableSlot/count"`: calculates the number remaining task slots available for auto kill
`"killTask/maxSlot/count"`: calculates the maximum number of tasks available for auto kill
`"killTask/task/count"`: calculates the number of tasks submitted by auto kill.
The current version of jackson-databind is flagged for vulnerabilities CVE-2020-28491 (Although cbor format is not used in druid), CVE-2020-36518 (Seems genuine as deeply nested json in can cause resource exhaustion). Updating the dependency to the latest version 2.12.7 to fix these vulnerabilities.
### Description
Previously, the `KillUnusedSegments` coordinator duty, in charge of periodically deleting unused segments, could spawn an unlimited number of kill tasks for unused segments. This change adds 2 new coordinator dynamic configs that can be used to control the limit of tasks spawned by this coordinator duty
`killTaskSlotRatio`: Ratio of total available task slots, including autoscaling if applicable that will be allowed for kill tasks. This limit only applies for kill tasks that are spawned automatically by the coordinator's auto kill duty. Default is 1, which allows all available tasks to be used, which is the existing behavior
`maxKillTaskSlots`: Maximum number of tasks that will be allowed for kill tasks. This limit only applies for kill tasks that are spawned automatically by the coordinator's auto kill duty. Default is INT.MAX, which essentially allows for unbounded number of tasks, which is the existing behavior.
Realize that we can effectively get away with just the one `killTaskSlotRatio`, but following similarly to the compaction config, which has similar properties; I thought it was good to have some control of the upper limit regardless of ratio provided.
#### Release note
NEW: `killTaskSlotRatio` and `maxKillTaskSlots` coordinator dynamic config properties added that allow control of task resource usage spawned by `KillUnusedSegments` coordinator task (auto kill)
### Description
Previously, the `maxSegments` configured for auto kill could be ignored if an interval of data for a given datasource had more than this number of unused segments, causing the kill task spawned with the task of deleting unused segments in that given interval of data to delete more than the `maxSegments` configured. Now each kill task spawned by the auto kill coordinator duty, will kill at most `limit` segments. This is done by adding a new config property to the `KillUnusedSegmentTask` which allows users to specify this limit.
* Minimize PostAggregator computations
Since a change back in 2014, the topN query has been computing
all PostAggregators on all intermediate responses from leaf nodes
to brokers. This generates significant slow downs for queries
with relatively expensive PostAggregators. This change rewrites
the query that is pushed down to only have the minimal set of
PostAggregators such that it is impossible for downstream
processing to do too much work. The final PostAggregators are
applied at the very end.
Changes:
- Add interface `SegmentDeleteHandler` for marking segments as unused
- In `StrategicSegmentAssigner`, collect all segments on which a drop rule applies in a list
- Process the list above as a batch delete rather than individual deletes
- Improve alert messages when an invalid tier is specified in a load rule
- Improve alert message when no rule applies on a segment
split KillUnusedSegmentsTask to smaller batches
Processing in smaller chunks allows the task execution to yield the TaskLockbox lock,
which allows the overlord to continue being responsive to other tasks and users while
this particular kill task is executing.
* introduce KillUnusedSegmentsTask batchSize parameter to control size of batching
* provide an explanation for kill task batchSize parameter
* add logging details for kill batch progress
Changes
- Rename `LoadQueuePeonTester` to `TestLoadQueuePeon`
- Simplify `TestLoadQueuePeon` by removing dependency on `CuratorLoadQueuePeon`
- Remove usages of mock peons in `LoadRuleTest` and use `TestLoadQueuePeon` instead
* allow for batched delete of segments instead of deleting segment data one by one
create new batchdelete method in datasegment killer that has default functionality
of iterating through all segments and calling delete on them. This will enable
a slow rollout of other deepstorage implementations to move to a batched delete
on their own time
* cleanup batchdelete segments
* batch delete with the omni data deleter
cleaned up code
just need to add tests and docs for this functionality
* update java doc to explain how it will try to use batch if function is overwritten
* rename killBatch to kill
add unit tests
* add omniDataSegmentKillerTest for deleting multiple segments at a time. fix checkstyle
* explain test peculiarity better
* clean up batch kill in s3.
* remove unused return value. cleanup comments and fix checkstyle
* default to batch delete. more specific java docs. list segments that couldn't be deleted
if there was a client error or server error
* simplify error handling
* add tests where an exception is thrown when killing multiple s3 segments
* add test for failing to delete two calls with the s3 client
* fix javadoc for kill(List<DataSegment> segments) clean up tests remove feature flag
* fix typo in javadocs
* fix test failure
* fix checkstyle and improve tests
* fix intellij inspections issues
* address comments, make delete multiple segments not assume same bucket
* fix test errors
* better grammar and punctuation. fix test. and better logging for exception
* remove unused code
* avoid extra arraylist instantiation
* fix broken test
* fix broken test
* fix tests to use assert.throws
* Merge core CoordinatorClient with MSQ CoordinatorServiceClient.
Continuing the work from #12696, this patch merges the MSQ
CoordinatorServiceClient into the core CoordinatorClient, yielding a single
interface that serves both needs and is based on the ServiceClient RPC
system rather than DruidLeaderClient.
Also removes the backwards-compatibility code for the handoff API in
CoordinatorBasedSegmentHandoffNotifier, because the new API was added
in 0.14.0. That's long enough ago that we don't need backwards
compatibility for rolling updates.
* Fixups.
* Trigger GHA.
* Remove unnecessary retrying in DruidInputSource. Add "about an hour"
retry policy and h
* EasyMock
* Use OverlordClient for all Overlord RPCs.
Continuing the work from #12696, this patch removes HttpIndexingServiceClient
and the IndexingService flavor of DruidLeaderClient completely. All remaining
usages are migrated to OverlordClient.
Supporting changes include:
1) Add a variety of methods to OverlordClient.
2) Update MetadataTaskStorage to skip the complete-task lookup when
the caller requests zero completed tasks. This helps performance of
the "get active tasks" APIs, which don't want to see complete ones.
* Use less forbidden APIs.
* Fixes from CI.
* Add test coverage.
* Two more tests.
* Fix test.
* Updates from CR.
* Remove unthrown exceptions.
* Refactor to improve testability and test coverage.
* Add isNil tests.
* Remove unnecessary "deserialize" methods.
Related to #14634
Changes:
- Update `IndexerSQLMetadataStorageCoordinator.deleteSegments` to use
JDBI PreparedBatch instead of issuing single DELETE statements
This PR uses the QoSFilter available in Jetty to park the query requests that exceed a configured limit. This is done so that other HTTP requests such as health check calls do not get blocked if the query server is busy serving long-running queries. The same mechanism can also be used in the future to isolate interactive queries from long-running select queries from interactive queries within the same broker.
Right now, you can still get that isolation by setting druid.query.scheduler.numThreads to a value lowe than druid.server.http.numThreads. That enables total laning but the side effect is that excess requests are not queued and rejected outright that leads to a bad user experience.
Parked requests are timed out after 30 seconds by default. I overrode that to the maxQueryTimeout in this PR.
changes:
* new filters that preserve match value typing to better handle filtering different column types
* sql planner uses new filters by default in sql compatible null handling mode
* remove isFilterable from column capabilities
* proper handling of array filtering, add array processor to column processors
* javadoc for sql test filter functions
* range filter support for arrays, tons more tests, fixes
* add dimension selector tests for mixed type roots
* support json equality
* rename semantic index maker thingys to mostly have plural names since they typically make many indexes, e.g. StringValueSetIndex -> StringValueSetIndexes
* add cooler equality index maker, ValueIndexes
* fix missing string utf8 index supplier
* expression array comparator stuff
Tests to verify the following behaviour have been added:
- Segments from more populous servers are more likely to be picked irrespective of
sample size.
- Segments from all servers are equally likely to be picked if all servers have equivalent
number of segments.
* Change default handoffConditionTimeout to 15 minutes.
Most of the time, when handoff is taking this long, it's because something
is preventing Historicals from loading new data. In this case, we have
two choices:
1) Stop making progress on ingestion, wait for Historicals to load stuff,
and keep the waiting-for-handoff segments available on realtime tasks.
(handoffConditionTimeout = 0, the current default)
2) Continue making progress on ingestion, by exiting the realtime tasks
that were waiting for handoff. Once the Historicals get their act
together, the segments will be loaded, as they are still there on
deep storage. They will just not be continuously available.
(handoffConditionTimeout > 0)
I believe most users would prefer [2], because [1] risks ingestion falling
behind the stream, which causes many other problems. It can cause data loss
if the stream ages-out data before we have a chance to ingest it.
Due to the way tuningConfigs are serialized -- defaults are baked into the
serialized form that is written to the database -- this default change will
not change anyone's existing supervisors. It will take effect for newly
created supervisors.
* Fix tests.
* Update docs/development/extensions-core/kafka-supervisor-reference.md
Co-authored-by: Katya Macedo <38017980+ektravel@users.noreply.github.com>
* Update docs/development/extensions-core/kinesis-ingestion.md
Co-authored-by: Katya Macedo <38017980+ektravel@users.noreply.github.com>
---------
Co-authored-by: Katya Macedo <38017980+ektravel@users.noreply.github.com>
* Add aggregatorMergeStrategy property to SegmentMetadaQuery.
- Adds a new property aggregatorMergeStrategy to segmentMetadata query.
aggregatorMergeStrategy currently supports three types of merge strategies -
the legacy strict and lenient strategies, and the new latest strategy.
- The latest strategy considers the latest aggregator from the latest segment
by time order when there's a conflict when merging aggregators from different
segments.
- Deprecate lenientAggregatorMerge property; The API validates that both the new
and old properties are not set, and returns an exception.
- When merging segments as part of segmentMetadata query, the segments have a more
elaborate id -- <datasource>_<interval>_merged_<partition_number> format, similar to
the name format that segments usually contain. Previously it was simply "merged".
- Adjust unit tests to test the latest strategy, to assert the returned complete
SegmentAnalysis object instead of just the aggregators for completeness.
* Don't explicitly set strict strategy in tests
* Apply suggestions from code review
Co-authored-by: Katya Macedo <38017980+ektravel@users.noreply.github.com>
* Update docs/querying/segmentmetadataquery.md
* Apply suggestions from code review
Co-authored-by: Katya Macedo <38017980+ektravel@users.noreply.github.com>
---------
Co-authored-by: Katya Macedo <38017980+ektravel@users.noreply.github.com>
* Add ZooKeeper connection state alerts and metrics.
- New metric "zk/connected" is an indicator showing 1 when connected,
0 when disconnected.
- New metric "zk/disconnected/time" measures time spent disconnected.
- New alert when Curator connection state enters LOST or SUSPENDED.
* Use right GuardedBy.
* Test fixes, coverage.
* Adjustment.
* Fix tests.
* Fix ITs.
* Improved injection.
* Adjust metric name, add tests.
Cache is disabled for GroupByStrategyV2 on broker since the pr #3820 [groupBy v2: Results not fully merged when caching is enabled on the broker]. But we can enable the result-level cache on broker for GroupByStrategyV2 and keep the segment-level cache disabled.
Description:
`TaskQueue.notifyStatus` is often a heavy call as it performs the following operations:
- Update task status in metadata DB
- Update task locks in metadata DB
- Request (synchronously) the task runner to shutdown the completed task
- Clean up in-memory data structures
This method can often be slow and can cause worker sync / task runners to slow down.
Main changes:
- Run task completion callbacks in a separate executor to handle task completion updates
- Add new config `druid.indexer.queue.taskCompleteHandlerNumThreads`
- Add metrics to monitor number of processed and queued items
- There are still other paths that can invoke `notifyStatus`, but those need not be moved to
the new executor as they are synchronous on purpose.
Other changes:
- Add new metrics `task/status/queue/count`, `task/status/handled/count`
- Add `TaskCountStatsProvider.getStats()` which deprecates the other `getXXXTaskCount` methods.
- Use `CoordinatorRunStats` to collect and report metrics. This class has been used as is
for now but will later be renamed and repurposed to use across all Druid services.
The wait doesn't seem to serve a purpose, other than causing delays
when checking isInitialized() for a large number of things that have
not yet been initialized.
UniformGranularityTest's test to test a large number of intervals
runs through 10 years of 1 second intervals. This pushes a lot of
stuff through IntervalIterator and shows up in terms of test
runtime as one of the hottest tests. Most of the time is going to
constructing jodatime objects because it is doing things with
DateTime objects instead of millis. Change the calls to use
millis instead and things go faster.
If a server is removed during `HttpServerInventoryView.serverInventoryInitialized`,
the initialization gets stuck as this server is never synced. The method eventually times
out (default 250s).
Fix: Mark a server as stopped if it is removed. `serverInventoryInitialized` only waits for
non-stopped servers to sync.
Other changes:
- Add new metrics for better debugging of slow broker/coordinator startup
- `segment/serverview/sync/healthy`: whether the server view is syncing properly with a server
- `segment/serverview/sync/unstableTime`: time for which sync with a server has been unstable
- Clean up logging in `HttpServerInventoryView` and `ChangeRequestHttpSyncer`
- Minor refactor for readability
- Add utility class `Stopwatch`
- Add tests and stubs
After #13197 , several coordinator configs are now redundant as they are not being
used anymore, neither with `smartSegmentLoading` nor otherwise.
Changes:
- Remove dynamic configs `emitBalancingStats`: balancer error stats are always
emitted, debug stats can be logged by using `debugDimensions`
- `useBatchedSegmentSampler`, `percentOfSegmentsToConsiderPerMove`:
batched segment sampling is always used
- Add test to verify deserialization with unknown properties
- Update `CoordinatorRunStats` to always track stats, this can be optimized later.
* combine string column implementations
changes:
* generic indexed, front-coded, and auto string columns now all share the same column and index supplier implementations
* remove CachingIndexed implementation, which I think is largely no longer needed by the switch of many things to directly using ByteBuffer, avoiding the cost of creating Strings
* remove ColumnConfig.columnCacheSizeBytes since CachingIndexed was the only user
In these other cases, stick to plain "filter". This simplifies lots of
logic downstream, and doesn't hurt since we don't have intervals-specific
optimizations outside of tables.
Fixes an issue where we couldn't properly filter on a column from an
external datasource if it was named __time.
This PR aims to expose a new API called
"@path("/druid/v2/sql/statements/")" which takes the same payload as the current "/druid/v2/sql" endpoint and allows users to fetch results in an async manner.
Changes to `cost` strategy:
- In every `ServerHolder`, track the number of segments per datasource per interval
- Perform cost computations for a given interval just once, and then multiply by a constant
factor to account for the total segment count in that interval
- Do not perform joint cost computations with segments that are outside the compute interval
(± 45 days) for the segment being considered for move
- Remove metrics `segment/cost/*` as they were coordinator killers! Turning on these metrics
(by setting `emitBalancingStats` to true) has often caused the coordinator to be stuck for hours.
Moreover, they are too complicated to decipher and do not provide any meaningful insight into
a Druid cluster.
- Add new simpler metrics `segment/balancer/compute/*` to track cost computation time,
count and errors.
Other changes:
- Remove flaky test from `CostBalancerStrategyTest`.
- Add tests to verify that computed cost has remained unchanged
- Remove usages of mock `BalancerStrategy` from `LoadRuleTest`, `BalanceSegmentsTest`
- Clean up `BalancerStrategy` interface
* Add OverlordStatusMonitor and CoordinatorStatusMonitor to monitor service leader status
* make the monitor more general
* resolve conflict
* use Supplier pattern to provide metrics
* reformat code and doc
* move service specific tag to dimension
* minor refine
* update doc
* reformat code
* address comments
* remove declared exception
* bind HeartbeatSupplier conditionally in Coordinator
Users can now add a guardrail to prevent subquery’s results from exceeding the set number of bytes by setting druid.server.http.maxSubqueryRows in Broker's config or maxSubqueryRows in the query context. This feature is experimental for now and would default back to row-based limiting in case it fails to get the accurate size of the results consumed by the query.
Changes:
- Add property `useDefaultTierForNull` for all load rules. This property determines the default
value of `tieredReplicants` if it is not specified. When true, the default is `_default_tier => 2 replicas`.
When false, the default is empty, i.e. no replicas on any tier.
- Fix validation to allow empty replicants map, so that the segment is used but not loaded anywhere.
Added a new monitor SysMonitorOshi to replace SysMonitor. The new monitor has a wider support for different machine architectures including ARM instances. Please switch to SysMonitorOshi as SysMonitor is now deprecated and will be removed in future releases.
This commit does a complete revamp of the coordinator to address problem areas:
- Stability: Fix several bugs, add capabilities to prioritize and cancel load queue items
- Visibility: Add new metrics, improve logs, revamp `CoordinatorRunStats`
- Configuration: Add dynamic config `smartSegmentLoading` to automatically set
optimal values for all segment loading configs such as `maxSegmentsToMove`,
`replicationThrottleLimit` and `maxSegmentsInNodeLoadingQueue`.
Changed classes:
- Add `StrategicSegmentAssigner` to make assignment decisions for load, replicate and move
- Add `SegmentAction` to distinguish between load, replicate, drop and move operations
- Add `SegmentReplicationStatus` to capture current state of replication of all used segments
- Add `SegmentLoadingConfig` to contain recomputed dynamic config values
- Simplify classes `LoadRule`, `BroadcastRule`
- Simplify the `BalancerStrategy` and `CostBalancerStrategy`
- Add several new methods to `ServerHolder` to track loaded and queued segments
- Refactor `DruidCoordinator`
Impact:
- Enable `smartSegmentLoading` by default. With this enabled, none of the following
dynamic configs need to be set: `maxSegmentsToMove`, `replicationThrottleLimit`,
`maxSegmentsInNodeLoadingQueue`, `useRoundRobinSegmentAssignment`,
`emitBalancingStats` and `replicantLifetime`.
- Coordinator reports richer metrics and produces cleaner and more informative logs
- Coordinator uses an unlimited load queue for all serves, and makes better assignment decisions
Introduce DruidException, an exception whose goal in life is to be delivered to a user.
DruidException itself has javadoc on it to describe how it should be used. This commit both introduces the Exception and adjusts some of the places that are generating exceptions to generate DruidException objects instead, as a way to show how the Exception should be used.
This work was a 3rd iteration on top of work that was started by Paul Rogers. I don't know if his name will survive the squash-and-merge, so I'm calling it out here and thanking him for starting on this.
Description:
Druid allows a configuration of load rules that may cause a used segment to not be loaded
on any historical. This status is not tracked in the sys.segments table on the broker, which
makes it difficult to determine if the unavailability of a segment is expected and if we should
not wait for it to be loaded on a server after ingestion has finished.
Changes:
- Track replication factor in `SegmentReplicantLookup` during evaluation of load rules
- Update API `/druid/coordinator/v1metadata/segments` to return replication factor
- Add column `replication_factor` to the sys.segments virtual table and populate it in
`MetadataSegmentView`
- If this column is 0, the segment is not assigned to any historical and will not be loaded.
Changes
- Add a `DruidException` which contains a user-facing error message, HTTP response code
- Make `EntryExistsException` extend `DruidException`
- If metadata store max_allowed_packet limit is violated while inserting a new task, throw
`DruidException` with response code 400 (bad request) to prevent retries
- Add `SQLMetadataConnector.isRootCausePacketTooBigException` with impl for MySQL
Changes:
- Add a timeout of 1 minute to resultFuture.get() in `CostBalancerStrategy.chooseBestServer`.
1 minute is the typical time for a full coordinator run and is more than enough time for cost
computations of a single segment.
- Raise an alert if an exception is encountered while computing costs and if the executor has
not been shutdown. This is because a shutdown is intentional and does not require an alert.
It was found that several supported tasks / input sources did not have implementations for the methods used by the input source security feature, causing these tasks and input sources to fail when used with this feature. This pr adds the needed missing implementations. Also securing the sampling endpoint with input source security, when enabled.
Changes:
- `CostBalancerStrategyTest`
- Focus on verification of cost computations rather than choosing servers in this test
- Add new tests `testComputeCost` and `testJointSegmentsCost`
- Add tests to demonstrate that with a long enough interval gap, all costs become negligible
- Retain `testIntervalCost` and `testIntervalCostAdditivity`
- Remove redundant tests such as `testStrategyMultiThreaded`, `testStrategySingleThreaded`as
verification of this behaviour is better suited to `BalancingStrategiesTest`.
- `CostBalancerStrategyBenchmark`
- Remove usage of static method from `CostBalancerStrategyTest`
- Explicitly setup cluster and segments to use for benchmarking
The defaults of the following config values in the `CoordinatorDynamicConfig` are being updated.
1. `maxSegmentsInNodeLoadingQueue = 500` (previous = 100)
2. `replicationThrottleLimit = 500` (previous = 10)
Rationale: With round-robin segment assignment now being the default assignment technique,
the Coordinator can assign a large number of under-replicated/unavailable segments very quickly,
without getting stuck in `RunRules` duty due to very slow strategy-based cost computations.
3. `maxSegmentsToMove = 100` (previous = 5)
Rationale: A very low value (say 5) is ineffective in balancing especially if there are many segments
to balance. A very large value can cause excessive moves, which has these disadvantages:
- Load of moving segments competing with load of unavailable/under-replicated segments
- Unnecessary network costs due to constant download and delete of segments
These defaults will be revisited after #13197 is merged.
* Expr getCacheKey now delegates to children
* Removed the LOOKUP_EXPR_CACHE_KEY as we do not need it
* Adding an unit test
* Update processing/src/main/java/org/apache/druid/math/expr/Expr.java
Co-authored-by: Clint Wylie <cjwylie@gmail.com>
---------
Co-authored-by: Clint Wylie <cjwylie@gmail.com>
The "new" IT framework provides a convenient way to package and run integration tests (ITs), but only for core modules. We have a use case to run an IT for a contrib extension: the proposed gRPC query extension. This PR provides the IT framework functionality to allow non-core ITs.
* Be able to load segments on Peons
This change introduces a new config on WorkerConfig
that indicates how many bytes of each storage
location to use for storage of a task. Said config
is divided up amongst the locations and slots
and then used to set TaskConfig.tmpStorageBytesPerTask
The Peons use their local task dir and
tmpStorageBytesPerTask as their StorageLocations for
the SegmentManager such that they can accept broadcast
segments.
Changes:
- Replace `OverlordHelper` with `OverlordDuty` to align with `CoordinatorDuty`
- Each duty has a `run()` method and defines a `Schedule` with an initial delay and period.
- Update existing duties `TaskLogAutoCleaner` and `DurableStorageCleaner`
- Add utility class `Configs`
- Update log, error messages and javadocs
- Other minor style improvements
Changes:
- Do not allow retention rules for any datasource or cluster to be null
- Allow empty rules at the datasource level but not at the cluster level
- Add validation to ensure that `druid.manager.rules.defaultRule` is always set correctly
- Minor style refactors
This PR fixes an issue that could occur if druid.query.scheduler.numThreads is configured and any exception occurs after QueryScheduler.run has been called to create a Sequence. This would result in total and/or lane specific locks being acquired, but because the sequence was not actually being evaluated, the "baggage" which typically releases these locks was not being executed. An example of how this can happen is if a group-by having filter, which wraps and transforms this sequence happens to explode while wrapping the sequence. The end result is that the locks are acquired, but never released, eventually halting the ability to execute any queries.
This PR fixes an issue when using 'auto' encoded LONG typed columns and the 'vectorized' query engine. These columns use a delta based bit-packing mechanism, and errors in the vectorized reader would cause it to incorrectly read column values for some bit sizes (1 through 32 bits). This is a regression caused by #11004, which added the optimized readers to improve performance, so impacts Druid versions 0.22.0+.
While writing the test I finally got sad enough about IndexSpec not having a "builder", so I made one, and switched all the things to use it. Apologies for the noise in this bug fix PR, the only real changes are in VSizeLongSerde, and the tests that have been modified to cover the buggy behavior, VSizeLongSerdeTest and ExpressionVectorSelectorsTest. Everything else is just cleanup of IndexSpec usage.
* Make LoggingEmitter more useful
* Skip code coverage for facade classes
* fix spellcheck
* code review
* fix dependency
* logging.md
* fix checkstyle
* Add back jacoco version to main pom
* Fix two concurrency issues with segment fetching.
1) SegmentLocalCacheManager: Fix a concurrency issue where certain directory
cleanup happened outside of directoryWriteRemoveLock. This created the
possibility that segments would be deleted by one thread, while being
actively downloaded by another thread.
2) TaskDataSegmentProcessor (MSQ): Fix a concurrency issue when two stages
in the same process both use the same segment. For example: a self-join
using distributed sort-merge. Prior to this change, the two stages could
delete each others' segments.
3) ReferenceCountingResourceHolder: increment() returns a new ResourceHolder,
rather than a Releaser. This allows it to be passed to callers without them
having to hold on to both the original ResourceHolder *and* a Releaser.
4) Simplify various interfaces and implementations by using ResourceHolder
instead of Pair and instead of split-up fields.
* Add test.
* Fix style.
* Remove Releaser.
* Updates from master.
* Add some GuardedBys.
* Use the correct GuardedBy.
* Adjustments.
* Refresh DruidLeaderClient cache for non-200 responses
* Change local variable name to avoid confusion
* Implicit retries for 503 and 504
* Remove unused imports
* Use argumentmatcher instead of Mockito for #any in test
* Remove flag to disable retry for 503/504
* Remove unused import from test
* Add log line for internal retry
---------
Co-authored-by: Abhishek Singh Chouhan <abhishek.chouhan@salesforce.com>
### Description
This pr fixes a few bugs found with the inputSource security feature.
1. `KillUnusedSegmentsTask` previously had no definition for the `getInputSourceResources`, which caused an unsupportedOperationException to be thrown when this task type was submitted with the inputSource security feature enabled. This task type should not require any input source specific resources, so returning an empty set for this task type now.
2. Fixed a bug where when the input source type security feature is enabled, all of the input source type specific resources used where authenticated against:
`{"resource": {"name": "EXTERNAL", "type": "{INPUT_SOURCE_TYPE}"}, "action": "READ"}`
When they should be instead authenticated against:
`{"resource": {"name": "{INPUT_SOURCE_TYPE}", "type": "EXTERNAL"}, "action": "READ"}`
3. fixed bug where supervisor tasks were not authenticated against the specific input source types used, if input source security feature was enabled.
* Make the tasks run with only a single directory
There was a change that tried to get indexing to run on multiple disks
It made a bunch of changes to how tasks run, effectively hiding the
"safe" directory for tasks to write files into from the task code itself
making it extremely difficult to do anything correctly inside of a task.
This change reverts those changes inside of the tasks and makes it so that
only the task runners are the ones that make decisions about which
mount points should be used for storing task-related files.
It adds the config druid.worker.baseTaskDirs which can be used by the
task runners to know which directories they should schedule tasks inside of.
The TaskConfig remains the authoritative source of configuration for where
and how an individual task should be operating.
### Description
This change allows for input sources used during MSQ ingestion to be authorized for multiple input source types, instead of just 1. Such an input source that allows for multiple types is the CombiningInputSource.
Also fixed bug that caused some input source specific functions to be authorized against the permissions
`
[
new ResourceAction(new Resource(ResourceType.EXTERNAL, ResourceType.EXTERNAL), Action.READ),
new ResourceAction(new Resource(ResourceType.EXTERNAL, {input_source_type}), Action.READ)
]
`
when the inputSource based authorization feature is enabled, when it should instead be authorized against
`
[
new ResourceAction(new Resource(ResourceType.EXTERNAL, {input_source_type}), Action.READ)
]
`
Fixes#13837.
### Description
This change allows for input source type security in the native task layer.
To enable this feature, the user must set the following property to true:
`druid.auth.enableInputSourceSecurity=true`
The default value for this property is false, which will continue the existing functionality of needing authorization to write to the respective datasource.
When this config is enabled, the users will be required to be authorized for the following resource action, in addition to write permission on the respective datasource.
`new ResourceAction(new Resource(ResourceType.EXTERNAL, {INPUT_SOURCE_TYPE}, Action.READ`
where `{INPUT_SOURCE_TYPE}` is the type of the input source being used;, http, inline, s3, etc..
Only tasks that provide a non-default implementation of the `getInputSourceResources` method can be submitted when config `druid.auth.enableInputSourceSecurity=true` is set. Otherwise, a 400 error will be thrown.
changes:
* introduce ColumnFormat to separate physical storage format from logical type. ColumnFormat is now used instead of ColumnCapabilities to get column handlers for segment creation
* introduce new 'auto' type indexer and merger which produces a new common nested format of columns, which is the next logical iteration of the nested column stuff. Essentially this is an automatic type column indexer that produces the most appropriate column for the given inputs, making either STRING, ARRAY<STRING>, LONG, ARRAY<LONG>, DOUBLE, ARRAY<DOUBLE>, or COMPLEX<json>.
* revert NestedDataColumnIndexer, NestedDataColumnMerger, NestedDataColumnSerializer to their version pre #13803 behavior (v4) for backwards compatibility
* fix a bug in RoaringBitmapSerdeFactory if anything actually ever wrote out an empty bitmap using toBytes and then later tried to read it (the nerve!)
Due to race conditions, the BrokerServerView may sometimes try to add a segment to a server which has already been removed from the inventory. This results in an NPE and keeps the BrokerServerView from processing all change requests.
This change introduces the concept of input source type security model, proposed in #13837.. With this change, this feature is only available at the SQL layer, but we will expand to native layer in a follow up PR.
To enable this feature, the user must set the following property to true:
druid.auth.enableInputSourceSecurity=true
The default value for this property is false, which will continue the existing functionality of having the usage all external sources being authorized against the hardcoded resource action
new ResourceAction(new Resource(ResourceType.EXTERNAL, ResourceType.EXTERNAL), Action.READ
When this config is enabled, the users will be required to be authorized for the following resource action
new ResourceAction(new Resource(ResourceType.EXTERNAL, {INPUT_SOURCE_TYPE}, Action.READ
where {INPUT_SOURCE_TYPE} is the type of the input source being used;, http, inline, s3, etc..
Documentation has not been added for the feature as it is not complete at the moment, as we still need to enable this for the native layer in a follow up pr.
* Add segment generator counters to reports
* Remove unneeded annotation
* Fix checkstyle and coverage
* Add persist and merged as new metrics
* Address review comments
* Fix checkstyle
* Create metrics class to handle updating counters
* Address review comments
* Add rowsPushed as a new metrics
changes:
* fixes inconsistent handling of byte[] values between ExprEval.bestEffortOf and ExprEval.ofType, which could cause byte[] values to end up as java toString values instead of base64 encoded strings in ingest time transforms
* improved ExpressionTransform binding to re-use ExprEval.bestEffortOf when evaluating a binding instead of throwing it away
* improved ExpressionTransform array handling, added RowFunction.evalDimension that returns List<String> to back Row.getDimension and remove the automatic coercing of array types that would typically happen to expression transforms unless using Row.getDimension
* added some tests for ExpressionTransform with array inputs
* improved ExpressionPostAggregator to use partial type information from decoration
* migrate some test uses of InputBindings.forMap to use other methods
Changes:
- Set `useRoundRobinSegmentAssignment` in coordinator dynamic config to `true` by default.
- Set `batchSegmentAllocation` in `TaskLockConfig` (used in Overlord runtime properties) to `true` by default.
* Lower default maxRowsInMemory for realtime ingestion.
The thinking here is that for best ingestion throughput, we want
intermediate persists to be as big as possible without using up all
available memory. So, we rely mainly on maxBytesInMemory. The default
maxRowsInMemory (1 million) is really just a safety: in case we have
a large number of very small rows, we don't want to get overwhelmed
by per-row overheads.
However, maximum ingestion throughput isn't necessarily the primary
goal for realtime ingestion. Query performance is also important. And
because query performance is not as good on the in-memory dataset, it's
helpful to keep it from growing too large. 150k seems like a reasonable
balance here. It means that for a typical 5 million row segment, we
won't trigger more than 33 persists due to this limit, which is a
reasonable number of persists.
* Update tests.
* Update server/src/main/java/org/apache/druid/segment/indexing/RealtimeTuningConfig.java
Co-authored-by: Kashif Faraz <kashif.faraz@gmail.com>
* Fix test.
* Fix link.
---------
Co-authored-by: Kashif Faraz <kashif.faraz@gmail.com>
* This makes the zookeeper connection retry count configurable. This is presently hardcoded to 29 tries which ends up taking a long time for the druid node to shutdown in case of ZK connectivity loss.
Having a shorter retry count helps k8s deployments to fail fast. In situations where the underlying k8s node loses network connectivity or is no longer able to talk to zookeeper, failing fast can trigger pod restarts which can then reassign the pod to a healthy k8s node.
Existing behavior is preserved, but users can override this property if needed.
* Improve memory efficiency of WrappedRoaringBitmap.
Two changes:
1) Use an int[] for sizes 4 or below.
2) Remove the boolean compressRunOnSerialization. Doesn't save much
space, but it does save a little, and it isn't adding a ton of value
to have it be configurable. It was originally configurable in case
anything broke when enabling it, but it's been a while and nothing
has broken.
* Slight adjustment.
* Adjust for inspection.
* Updates.
* Update snaps.
* Update test.
* Adjust test.
* Fix snaps.
The FiniteFirehoseFactory and InputRowParser classes were deprecated in 0.17.0 (#8823) in favor of InputSource & InputFormat. This PR removes the FiniteFirehoseFactory and all its implementations along with classes solely used by them like Fetcher (Used by PrefetchableTextFilesFirehoseFactory). Refactors classes including tests using FiniteFirehoseFactory to use InputSource instead.
Removing InputRowParser may not be as trivial as many classes that aren't deprecated depends on it (with no alternatives), like EventReceiverFirehoseFactory. Hence FirehoseFactory, EventReceiverFirehoseFactory, and Firehose are marked deprecated.
* Make CompactionSearchPolicy injectable
A small refactoring that makes the search policy for compaction injectable.
Future changes can introduce new search policies that can be configured and
injected so that operators can choose which search policy is best suited for
their cluster.
This will also allow us to de-couple the scheduling of compaction jobs from
the CompactSegments duty, allowing the co-ordinator to schedule compaction
jobs faster than the duty lifecycle.
This PR is made so that it easy to review the future changes.
* fix tests
When both plainText and TLS ports are set in druid, the redirection to a different leader node can fail. This is caused by how we compare a redirect path and the leader locations registered with a druid node. While the registered location has both plainText and TLS port set, the redirect path only has one port since it's a URI.
* merge druid-core, extendedset, and druid-hll into druid-processing to simplify everything
* fix poms and license stuff
* mockito is evil
* allow reset of JvmUtils RuntimeInfo if tests used static injection to override
* Use an HllSketchHolder object to enable optimized merge
HllSketchAggregatorFactory.combine had been implemented using a
pure pair-wise, "make a union -> add 2 things to union -> get sketch"
algorithm. This algorithm does 2 things that was CPU
1) The Union object always builds an HLL_8 sketch regardless of the
target type. This means that when the target type is not HLL_8, we
spent CPU cycles converting to HLL_8 and back over and over again
2) By throwing away the Union object and converting back to the
HllSketch only to build another Union object, we do lots and lots
of copy+conversions of the HllSketch
This change introduces an HllSketchHolder object which can hold onto
a Union object and delay conversion back into an HllSketch until
it is actually needed. This follows the same pattern as the
SketchHolder object for theta sketches.
* Fallback virtual column
This virtual columns enables falling back to another column if
the original column doesn't exist. This is useful when doing
column migrations and you have some old data with column X,
new data with column Y and you want to use Y if it exists, X
otherwise so that you can run a consistent query against all of
the data.
Add a new API to return the history of changes to automatic compaction config history to make it easy for users to see what changes have been made to their auto-compaction config.
The API is scoped per dataSource to allow users to triage issues with an individual dataSource. The API responds with a list of configs when there is a change to either the settings that impact all auto-compaction configs on a cluster or the dataSource in question.
* discover nested columns when using nested column indexer for schemaless
* move useNestedColumnIndexerForSchemaDiscovery from AppendableIndexSpec to DimensionsSpec
Much improved table functions
* Revises properties, definitions in the catalog
* Adds a "table function" abstraction to model such functions
* Specific functions for HTTP, inline, local and S3.
* Extended SQL types in the catalog
* Restructure external table definitions to use table functions
* EXTEND syntax for Druid's extern table function
* Support for array-valued table function parameters
* Support for array-valued SQL query parameters
* Much new documentation
* Kinesis: More robust default fetch settings.
1) Default recordsPerFetch and recordBufferSize based on available memory
rather than using hardcoded numbers. For this, we need an estimate
of record size. Use 10 KB for regular records and 1 MB for aggregated
records. With 1 GB heaps, 2 processors per task, and nonaggregated
records, recordBufferSize comes out to the same as the old
default (10000), and recordsPerFetch comes out slightly lower (1250
instead of 4000).
2) Default maxRecordsPerPoll based on whether records are aggregated
or not (100 if not aggregated, 1 if aggregated). Prior default was 100.
3) Default fetchThreads based on processors divided by task count on
Indexers, rather than overall processor count.
4) Additionally clean up the serialized JSON a bit by adding various
JsonInclude annotations.
* Updates for tests.
* Additional important verify.
* single typed "root" only nested columns now mimic "regular" columns of those types
* incremental index can now use nested column indexer instead of string indexer for discovered columns
* Validate response headers and fix exception logging
A class of QueryException were throwing away their
causes making it really hard to determine what's
going wrong when something goes wrong in the SQL
planner specifically. Fix that and adjust tests
to do more validation of response headers as well.
We allow 404s and 307s to be returned even without
authorization validated, but others get converted to 403
* Unify the handling of HTTP between SQL and Native
The SqlResource and QueryResource have been
using independent logic for things like error
handling and response context stuff. This
became abundantly clear and painful during a
change I was making for Window Functions, so
I unified them into using the same code for
walking the response and serializing it.
Things are still not perfectly unified (it would
be the absolute best if the SqlResource just
took SQL, planned it and then delegated the
query run entirely to the QueryResource), but
this refactor doesn't take that fully on.
The new code leverages async query processing
from our jetty container, the different
interaction model with the Resource means that
a lot of tests had to be adjusted to align with
the async query model. The semantics of the
tests remain the same with one exception: the
SqlResource used to not log requests that failed
authorization checks, now it does.
This commit adds a new class `InputStats` to track the total bytes processed by a task.
The field `processedBytes` is published in task reports along with other row stats.
Major changes:
- Add class `InputStats` to track processed bytes
- Add method `InputSourceReader.read(InputStats)` to read input rows while counting bytes.
> Since we need to count the bytes, we could not just have a wrapper around `InputSourceReader` or `InputEntityReader` (the way `CountableInputSourceReader` does) because the `InputSourceReader` only deals with `InputRow`s and the byte information is already lost.
- Classic batch: Use the new `InputSourceReader.read(inputStats)` in `AbstractBatchIndexTask`
- Streaming: Increment `processedBytes` in `StreamChunkParser`. This does not use the new `InputSourceReader.read(inputStats)` method.
- Extend `InputStats` with `RowIngestionMeters` so that bytes can be exposed in task reports
Other changes:
- Update tests to verify the value of `processedBytes`
- Rename `MutableRowIngestionMeters` to `SimpleRowIngestionMeters` and remove duplicate class
- Replace `CacheTestSegmentCacheManager` with `NoopSegmentCacheManager`
- Refactor `KafkaIndexTaskTest` and `KinesisIndexTaskTest`
Refactor DataSource to have a getAnalysis method()
This removes various parts of the code where while loops and instanceof
checks were being used to walk through the structure of DataSource objects
in order to build a DataSourceAnalysis. Instead we just ask the DataSource
for its analysis and allow the stack to rebuild whatever structure existed.
* Zero-copy local deep storage.
This is useful for local deep storage, since it reduces disk usage and
makes Historicals able to load segments instantaneously.
Two changes:
1) Introduce "druid.storage.zip" parameter for local storage, which defaults
to false. This changes default behavior from writing an index.zip to writing
a regular directory. This is safe to do even during a rolling update, because
the older code actually already handled unzipped directories being present
on local deep storage.
2) In LocalDataSegmentPuller and LocalDataSegmentPusher, use hard links
instead of copies when possible. (Generally this is possible when the
source and destination directory are on the same filesystem.)
* Druid automated quickstart
* remove conf/druid/single-server/quickstart/_common/historical/jvm.config
* Minor changes in python script
* Add lower bound memory for some services
* Additional runtime properties for services
* Update supervise script to accept command arguments, corresponding changes in druid-quickstart.py
* File end newline
* Limit the ability to start multiple instances of a service, documentation changes
* simplify script arguments
* restore changes in medium profile
* run-druid refactor
* compute and pass middle manager runtime properties to run-druid
supervise script changes to process java opts array
use argparse, leave free memory, logging
* Remove extra quotes from mm task javaopts array
* Update logic to compute minimum memory
* simplify run-druid
* remove debug options from run-druid
* resolve the config_path provided
* comment out service specific runtime properties which are computed in the code
* simplify run-druid
* clean up docs, naming changes
* Throw ValueError exception on illegal state
* update docs
* rename args, compute_only -> compute, run_zk -> zk
* update help documentation
* update help documentation
* move task memory computation into separate method
* Add validation checks
* remove print
* Add validations
* remove start-druid bash script, rename start-druid-main
* Include tasks in lower bound memory calculation
* Fix test
* 256m instead of 256g
* caffeine cache uses 5% of heap
* ensure min task count is 2, task count is monotonic
* update configs and documentation for runtime props in conf/druid/single-server/quickstart
* Update docs
* Specify memory argument for each profile in single-server.md
* Update middleManager runtime.properties
* Move quickstart configs to conf/druid/base, add bash launch script, support python2
* Update supervise script
* rename base config directory to auto
* rename python script, changes to pass repeated args to supervise
* remove exmaples/conf/druid/base dir
* add docs
* restore changes in conf dir
* update start-druid-auto
* remove hashref for commands in supervise script
* start-druid-main java_opts array is comma separated
* update entry point script name in python script
* Update help docs
* documentation changes
* docs changes
* update docs
* add support for running indexer
* update supported services list
* update help
* Update python.md
* remove dir
* update .spelling
* Remove dependency on psutil and pathlib
* update docs
* Update get_physical_memory method
* Update help docs
* update docs
* update method to get physical memory on python
* udpate spelling
* update .spelling
* minor change
* Minor change
* memory comptuation for indexer
* update start-druid
* Update python.md
* Update single-server.md
* Update python.md
* run python3 --version to check if python is installed
* Update supervise script
* start-druid: echo message if python not found
* update anchor text
* minor change
* Update condition in supervise script
* JVM not jvm in docs
* Processors for Window Processing
This is an initial take on how to use Processors
for Window Processing. A Processor is an interface
that transforms RowsAndColumns objects.
RowsAndColumns objects are essentially combinations
of rows and columns.
The intention is that these Processors are the start
of a set of operators that more closely resemble what
DB engineers would be accustomed to seeing.
* Wire up windowed processors with a query type that
can run them end-to-end. This code can be used to
actually run a query, so yay!
* Wire up windowed processors with a query type that
can run them end-to-end. This code can be used to
actually run a query, so yay!
* Some SQL tests for window functions. Added wikipedia
data to the indexes available to the
SQL queries and tests validating the windowing
functionality as it exists now.
Co-authored-by: Gian Merlino <gianmerlino@gmail.com>
* Switching emitter. This will allow for a per feed emitter designation.
This will work by looking at an event's feed and direct it to a specific emitter. If no specific feed is specified for a feed.
The emitter can direct the event to a default emitter.
* fix checkstyle issues and make docs for switching emitter use basic event feeds
* fix broken docs, add test, and guard against misconfigurations
* add module test
add switching emitter module test
* fix broken SwitchingEmitterModuleTest
* add apache license to top of test
* fix checkstyle issues
* address comments by adding javadocs, removing a todo, and making druid docs more clear
In a cluster with a large number of streaming tasks (~1000), SegmentAllocateActions
on the overlord can often take very long intervals of time to finish thus causing spikes
in the `task/action/run/time`. This may result in lag building up while a task waits for a
segment to get allocated.
The root causes are:
- large number of metadata calls made to the segments and pending segments tables
- `giant` lock held in `TaskLockbox.tryLock()` to acquire task locks and allocate segments
Since the contention typically arises when several tasks of the same datasource try
to allocate segments for the same interval/granularity, the allocation run times can be
improved by batching the requests together.
Changes
- Add flags
- `druid.indexer.tasklock.batchSegmentAllocation` (default `false`)
- `druid.indexer.tasklock.batchAllocationMaxWaitTime` (in millis) (default `1000`)
- Add methods `canPerformAsync` and `performAsync` to `TaskAction`
- Submit each allocate action to a `SegmentAllocationQueue`, and add to correct batch
- Process batch after `batchAllocationMaxWaitTime`
- Acquire `giant` lock just once per batch in `TaskLockbox`
- Reduce metadata calls by batching statements together and updating query filters
- Except for batching, retain the whole behaviour (order of steps, retries, etc.)
- Respond to leadership changes and fail items in queue when not leader
- Emit batch and request level metrics
SQL test framework extensions
* Capture planner artifacts: logical plan, etc.
* Planner test builder validates the logical plan
* Validation for the SQL resut schema (we already have
validation for the Druid row signature)
* Better Guice integration: properties, reuse Guice modules
* Avoid need for hand-coded expr, macro tables
* Retire some of the test-specific query component creation
* Fix query log hook race condition
Detects self-redirects, redirect loops, long redirect chains, and redirects to unknown servers.
Treat all of these cases as an unavailable service, retrying if the retry policy allows it.
Previously, some of these cases would lead to a prompt, unretryable error. This caused
clients contacting an Overlord during a leader change to fail with error messages like:
org.apache.druid.rpc.RpcException: Service [overlord] redirected too many times
Additionally, a slight refactor of callbacks in ServiceClientImpl improves readability of
the flow through onSuccess.
The batch segment sampling performs significantly better than the older method
of sampling if there are a large number of used segments. It also avoids duplicates.
Changes:
- Make batch segment sampling the default
- Deprecate the property `useBatchedSegmentSampler`
- Remove unused coordinator config `druid.coordinator.loadqueuepeon.repeatDelay`
- Cleanup `KillUnusedSegments`
- Simplify `KillUnusedSegmentsTest`, add better tests, remove redundant tests
Main changes:
1) Convert SeekableStreamIndexTaskClient to an interface, move old code
to SeekableStreamIndexTaskClientSyncImpl, and add new implementation
SeekableStreamIndexTaskClientAsyncImpl that uses ServiceClient.
2) Add "chatAsync" parameter to seekable stream supervisors that causes
the supervisor to use an async task client.
3) In SeekableStreamSupervisor.discoverTasks, adjust logic to avoid making
blocking RPC calls in workerExec threads.
4) In SeekableStreamSupervisor generally, switch from Futures.successfulAsList
to FutureUtils.coalesce, so we can better capture the errors that occurred
with contacting individual tasks.
Other, related changes:
1) Add ServiceRetryPolicy.retryNotAvailable, which controls whether
ServiceClient retries unavailable services. Useful since we do not
want to retry calls unavailable tasks within the service client. (The
supervisor does its own higher-level retries.)
2) Add FutureUtils.transformAsync, a more lambda friendly version of
Futures.transform(f, AsyncFunction).
3) Add FutureUtils.coalesce. Similar to Futures.successfulAsList, but
returns Either instead of using null on error.
4) Add JacksonUtils.readValue overloads for JavaType and TypeReference.
Segment assignments can take very long due to the strategy cost computation
for a large number of segments. This commit allows segment assignments to be
done in a round-robin fashion within a tier. Only segment balancing takes cost-based
decisions to move segments around.
Changes
- Add dynamic config `useRoundRobinSegmentAssignment` with default value false
- Add `RoundRobinServerSelector`. This does not implement the `BalancerStrategy`
as it does not conform to that contract and may also be used in conjunction with a
strategy (round-robin for `RunRules` and a cost strategy for `BalanceSegments`)
- Drops are still cost-based even when round-robin assignment is enabled.
Druid catalog basics
Catalog object model for tables, columns
Druid metadata DB storage (as an extension)
REST API to update the catalog (as an extension)
Integration tests
Model only: no planner integration yet
`cachingCost` strategy has some discrepancies when compared to cost strategy.
This commit addresses two of these by retaining the same behaviour as the `cost` strategy
when computing the cost of moving a segment to a server:
- subtract the self cost of a segment if it is being served by the target server
- subtract the cost of segments that are marked to be dropped
Other changes:
- Add tests to verify fixed strategy. These tests would fail without the fixes made to `CachingCostStrategy.computeCost()`
- Fix the definition of the segment related metrics in the docs.
- Fix some docs issues introduced in #13181
* Support for middle manager less druid, tasks launch as k8s jobs
* Fixing forking task runner test
* Test cleanup, dependency cleanup, intellij inspections cleanup
* Changes per PR review
Add configuration option to disable http/https proxy for the k8s client
Update the docs to provide more detail about sidecar support
* Removing un-needed log lines
* Small changes per PR review
* Upon task completion we callback to the overlord to update the status / locaiton, for slower k8s clusters, this reduces locking time significantly
* Merge conflict fix
* Fixing tests and docs
* update tiny-cluster.yaml
changed `enableTaskLevelLogPush` to `encapsulatedTask`
* Apply suggestions from code review
Co-authored-by: Abhishek Agarwal <1477457+abhishekagarwal87@users.noreply.github.com>
* Minor changes per PR request
* Cleanup, adding test to AbstractTask
* Add comment in peon.sh
* Bumping code coverage
* More tests to make code coverage happy
* Doh a duplicate dependnecy
* Integration test setup is weird for k8s, will do this in a different PR
* Reverting back all integration test changes, will do in anotbher PR
* use StringUtils.base64 instead of Base64
* Jdk is nasty, if i compress in jdk 11 in jdk 17 the decompressed result is different
Co-authored-by: Rahul Gidwani <r_gidwani@apple.com>
Co-authored-by: Abhishek Agarwal <1477457+abhishekagarwal87@users.noreply.github.com>
In clusters with a large number of segments, the duty `MarkAsUnusedOvershadowedSegments`
can take a long very long time to finish. This is because of the costly invocation of
`timeline.isOvershadowed` which is done for every used segment in every coordinator run.
Changes
- Use `DataSourceSnapshot.getOvershadowedSegments` to get all overshadowed segments
- Iterate over this set instead of all used segments to identify segments that can be marked as unused
- Mark segments as unused in the DB in batches rather than one at a time
- Refactor: Add class `SegmentTimeline` for ease of use and readability while using a
`VersionedIntervalTimeline` of segments.
* First set of changes for framework
* Second set of changes to move segment map function to data source
* Minot change to server manager
* Removing the createSegmentMapFunction from JoinableFactoryWrapper and moving to JoinDataSource
* Checkstyle fixes
* Patching Eric's fix for injection
* Checkstyle and fixing some CI issues
* Fixing code inspections and some failed tests and one injector for test in avatica
* Another set of changes for CI...almost there
* Equals and hashcode part update
* Fixing injector from Eric + refactoring for broadcastJoinHelper
* Updating second injector. Might revert later if better way found
* Fixing guice issue in JoinableFactory
* Addressing review comments part 1
* Temp changes refactoring
* Revert "Temp changes refactoring"
This reverts commit 9da42a9ef0.
* temp
* Temp discussions
* Refactoring temp
* Refatoring the query rewrite to refer to a datasource
* Refactoring getCacheKey by moving it inside data source
* Nullable annotation check in injector
* Addressing some comments, removing 2 analysis.isJoin() checks and correcting the benchmark files
* Minor changes for refactoring
* Addressing reviews part 1
* Refactoring part 2 with new test cases for broadcast join
* Set for nullables
* removing instance of checks
* Storing nullables in guice to avoid checking on reruns
* Fixing a test case and removing an irrelevant line
* Addressing the atomic reference review comments
* Remove basePersistDirectory from tuning configs.
Since the removal of CliRealtime, it serves no purpose, since it is
always overridden in production using withBasePersistDirectory given
some subdirectory of the task work directory.
Removing this from the tuning config has a benefit beyond removing
no-longer-needed logic: it also avoids the side effect of empty
"druid-realtime-persist" directories getting created in the systemwide
temp directory.
* Test adjustments to appropriately set basePersistDirectory.
* Remove unused import.
* Fix RATC constructor.
* Refactor Calcite test "framework" for planner tests
Refactors the current Calcite tests to make it a bit easier
to adjust the set of runtime objects used within a test.
* Move data creation out of CalciteTests into TestDataBuilder
* Move "framework" creation out of CalciteTests into
a QueryFramework
* Move injector-dependent functions from CalciteTests
into QueryFrameworkUtils
* Wrapper around the planner factory, etc. to allow
customization.
* Bulk of the "framework" created once per class rather
than once per test.
* Refactor tests to use a test builder
* Change all testQuery() methods to use the test builder.
Move test execution & verification into a test runner.
We introduce two new configuration keys that refine the query context security model controlled by druid.auth.authorizeQueryContextParams. When that value is set to true then two other configuration options become available:
druid.auth.unsecuredContextKeys: The set of query context keys that do not require a security check. Use this for the "white-list" of key to allow. All other keys go through the existing context key security checks.
druid.auth.securedContextKeys: The set of query context keys that do require a security check. Use this when you want to allow all but a specific set of keys: only these keys go through the existing context key security checks.
Both are set using JSON list format:
druid.auth.securedContextKeys=["secretKey1", "secretKey2"]
You generally set one or the other values. If both are set, unsecuredContextKeys acts as exceptions to securedContextKeys.
In addition, Druid defines two query context keys which always bypass checks because Druid uses them internally:
sqlQueryId
sqlStringifyArrays
1) Better support for Java 9+ in RuntimeInfo. This means that in many cases,
an actual validation can be done.
2) Clearer log message in cases where an actual validation cannot be done.
Druid currently uses Zookeeper dependent options as the default.
This commit updates the following to use HTTP as the default instead.
- task runner. `druid.indexer.runner.type=remote -> httpRemote`
- load queue peon. `druid.coordinator.loadqueuepeon.type=curator -> http`
- server inventory view. `druid.serverview.type=curator -> http`
Fixes#12822
The framework added here make it easy to write tests that verify the behaviour and interactions
of the following entities under various conditions:
- `DruidCoordinator`
- `HttpLoadQueuePeon`, `LoadQueueTaskMaster`
- coordinator duties: `BalanceSegments`, `RunRules`, `UnloadUnusedSegments`, etc.
- datasource retention rules: `LoadRule`, `DropRule`
Changes:
Add the following main classes:
- `CoordinatorSimulation` and related interfaces to dictate behaviour of simulation
- `CoordinatorSimulationBuilder` to build a simulation.
- `BlockingExecutorService` to keep submitted tasks in queue and execute them
only when explicitly invoked.
Add tests:
- `CoordinatorSimulationBaseTest`, `SegmentLoadingTest`, `SegmentBalancingTest`
- `SegmentLoadingNegativeTest` to contain tests which assert the existing erroneous behaviour
of segment loading. Once the behaviour is fixed, these tests will be moved to the regular
`SegmentLoadingTest`.
Please refer to the README.md in `org.apache.druid.server.coordinator.simulate` for more details
* Converted Druid planner to use statement handlers
Converts the large collection of if-statements for statement
types into a set of classes: one per supported statement type.
Cleans up a few error messages.
* Revisions from review comments
* Build fix
* Build fix
* Resolve merge confict.
* More merges with QueryResponse PR
* More parameterized type cleanup
Forces a rebuild due to a flaky test
* Allocate numCorePartitions using only used segments
* Add corePartition checks in existing test
* Separate committedMaxId and overallMaxId
* Fix bug: replace overall with committed
This commit fixes issues with delayed supervisor termination during certain transient states.
Tasks can be created during supervisor termination and left behind since the cleanup may
not consider these newly added tasks.
#12178 added a lock for the entire process of task creation to prevent such dangling tasks.
But it also introduced a deadlock scenario as follows:
- An invocation of `runInternal` is in progress.
- A `stop` request comes, acquires `stateChangeLock` and submit a `ShutdownNotice`
- `runInternal` keeps waiting to acquire the `stateChangeLock`
- `ShutdownNotice` remains stuck in the notice queue because `runInternal` is still running
- After some timeout, the supervisor goes through a forced termination
Fix:
* `SeekableStreamSupervisor.runInternal` - do not try to acquire lock if supervisor is already stopping
* `SupervisorStateManager.maybeSetState` - do not allow transitions from STOPPING state
* Move web-console dependency from druid-server to distribution
* Add a test to check if the web-console is correctly integrated
* exclude web-console from 'other integration tests'
* Revert "exclude web-console from 'other integration tests'"
This reverts commit 8d72225544.
* Revert "Add a test to check if the web-console is correctly integrated"
This reverts commit d6ac8f3087.
* Expose HTTP Response headers from SqlResource
This change makes the SqlResource expose HTTP response
headers in the same way that the QueryResource exposes them.
Fundamentally, the change is to pipe the QueryResponse
object all the way through to the Resource so that it can
populate response headers. There is also some code
cleanup around DI, as there was a superfluous FactoryFactory
class muddying things up.
* fix bug in /status/properties filtering
* Refactor tests to use jackson for parsing druid.server.hiddenProperties instead of hacky string modifications
* make javadoc more descriptive using example
* add in a sanity assertion that raw properties keyset size is greater than filtered properties keyset size
* Add interpolation to JsonConfigurator
* Fix checkstyle
* Fix tests by removing common-text override
* Add back commons-text without version
* Remove unused hadoopDir configs
* Move some stuff to hopefully pass coverage
* more consistent expression error messages
* review stuff
* add NamedFunction for Function, ApplyFunction, and ExprMacro to share common stuff
* fixes
* add expression transform name to transformer failure, better parse_json error messaging
* apache#12063 Ease of hidding sensitive properties from /status/properties endpoint
* apache#12063 Ease of hidding sensitive properties from /status/properties endpoint
* apache#12063 Ease of hidding sensitive properties from /status/properties endpoint
using one property for hiding properties, updated the index.md to document hiddenProperties
* apache#12063 Ease of hidding sensitive properties from /status/properties endpoint
Added java docs
* apache#12063 Ease of hidding sensitive properties from /status/properties endpoint
Add "password", "key", "token", "pwd" as default druid.server.hiddenProperties
fixed typo and removed redundant space
Co-authored-by: zemin <zemin.piao@adyen.com>
* json_value adjustments
changes:
* native json_value expression now has optional 3rd argument to specify type, which will cast all values to the specified type
* rework how JSON_VALUE is wired up in SQL. Now we are using a custom convertlet to translate JSON_VALUE(... RETURNING type) into dedicated JSON_VALUE_BIGINT, JSON_VALUE_DOUBLE, JSON_VALUE_VARCHAR, JSON_VALUE_ANY instead of using the calcite StandardConvertletTable that wraps JSON_VALUE_ANY in a CAST, so that we preserve the typing of JSON_VALUE to pass down to the native expression as the 3rd argument
* fix json_value_any to be usable by humans too, coverage
* fix bug
* checkstyle
* checkstyle
* review stuff
* validate that options to json_value are the supported options rather than ignore them
* remove more legacy undocumented functions
Kashif Faraz
Karan Kumar
Gian Merlino
Abhishek Radhakrishnan
Rishabh Singh
AmatyaAvadhanula
Pranav
Laksh Singla
Suneet Saldanha
George Shiqi Wu
kaisun2000
Adarsh Sanjeev
Parth Agrawal
Zoltan Haindrich
Clint Wylie
zachjsh
Tejaswini Bandlamudi
Abhishek Agarwal
Lucas Capistrant
imply-cheddar
Jason Koch
TSFenwick
aho135
hqx871
YongGang
Hardik Bajaj
Maytas Monsereenusorn
Soumyava
Paul Rogers
Abhishek Singh Chouhan
Atul Mohan
soullkk
Rohan Garg
Dr. Sizzles
Frank Chen
Adam Peck
zemin
Adam Peck
Santosh Pingale