* fix issue with auto column grouping
changes:
* fixes bug where AutoTypeColumnIndexer reports incorrect cardinality, allowing it to incorrectly use array grouper algorithm for realtime queries producing incorrect results for strings
* fixes bug where auto LONG and DOUBLE type columns incorrectly report not having null values, resulting in incorrect null handling when grouping
* fix test
This PR updates CompactionTask to not load any lookups by default, unless transformSpec is present.
If transformSpec is present, we will make the decision based on context values, loading all lookups by default. This is done to ensure backward compatibility since transformSpec can reference lookups.
If transform spec is not present and no context value is passed, we donot load any lookup.
This behavior can be overridden by supplying lookupLoadingMode and lookupsToLoad in the task context.
Changes:
- Remove deprecated `markAsUnused` parameter from `KillUnusedSegmentsTask`
- Allow `kill` task to use `REPLACE` lock when `useConcurrentLocks` is true
- Use `EXCLUSIVE` lock by default
This parameter has been removed for awhile now as of Druid 0.23.0
https://github.com/apache/druid/pull/12187.
The code was only used in tests to verify that serialization works.
Now remove all references to avoid any confusion.
* * add another catalog clustering columns unit test
* * dissallow clusterKeys with descending order
* * make more clear that clustering is re-written into ingest node
whether a catalog table or not
* * when partitionedBy is stored in catalog, user shouldnt need to specify
it in order to specify clustering
* * fix intellij inspection failure
Changes:
- Rename `DataSegmentChangeRequestAndStatus` to `DataSegmentChangeResponse`
- Rename `SegmentLoadDropHandler.Status` to `SegmentChangeStatus`
- Remove method `CoordinatorRunStats.getSnapshotAndReset()` as it was used only in
load queue peon implementations. Using an atomic reference is much simpler.
- Remove `ServerTestHelper.MAPPER`. Use existing `TestHelper.makeJsonMapper()` instead.
* MSQ controller: Support in-memory shuffles; towards JVM reuse.
This patch contains two controller changes that make progress towards a
lower-latency MSQ.
First, support for in-memory shuffles. The main feature of in-memory shuffles,
as far as the controller is concerned, is that they are not fully buffered. That
means that whenever a producer stage uses in-memory output, its consumer must run
concurrently. The controller determines which stages run concurrently, and when
they start and stop.
"Leapfrogging" allows any chain of sort-based stages to use in-memory shuffles
even if we can only run two stages at once. For example, in a linear chain of
stages 0 -> 1 -> 2 where all do sort-based shuffles, we can use in-memory shuffling
for each one while only running two at once. (When stage 1 is done reading input
and about to start writing its output, we can stop 0 and start 2.)
1) New OutputChannelMode enum attached to WorkOrders that tells workers
whether stage output should be in memory (MEMORY), or use local or durable
storage.
2) New logic in the ControllerQueryKernel to determine which stages can use
in-memory shuffling (ControllerUtils#computeStageGroups) and to launch them
at the appropriate time (ControllerQueryKernel#createNewKernels).
3) New "doneReadingInput" method on Controller (passed down to the stage kernels)
which allows stages to transition to POST_READING even if they are not
gathering statistics. This is important because it enables "leapfrogging"
for HASH_LOCAL_SORT shuffles, and for GLOBAL_SORT shuffles with 1 partition.
4) Moved result-reading from ControllerContext#writeReports to new QueryListener
interface, which ControllerImpl feeds results to row-by-row while the query
is still running. Important so we can read query results from the final
stage using an in-memory channel.
5) New class ControllerQueryKernelConfig holds configs that control kernel
behavior (such as whether to pipeline, maximum number of concurrent stages,
etc). Generated by the ControllerContext.
Second, a refactor towards running workers in persistent JVMs that are able to
cache data across queries. This is helpful because I believe we'll want to reuse
JVMs and cached data for latency reasons.
1) Move creation of WorkerManager and TableInputSpecSlicer to the
ControllerContext, rather than ControllerImpl. This allows managing workers and
work assignment differently when JVMs are reusable.
2) Lift the Controller Jersey resource out from ControllerChatHandler to a
reusable resource.
3) Move memory introspection to a MemoryIntrospector interface, and introduce
ControllerMemoryParameters that uses it. This makes it easier to run MSQ in
process types other than Indexer and Peon.
Both of these areas will have follow-ups that make similar changes on the
worker side.
* Address static checks.
* Address static checks.
* Fixes.
* Report writer tests.
* Adjustments.
* Fix reports.
* Review updates.
* Adjust name.
* Small changes.
This PR fixes the first and last vector aggregators and improves their readability. Following changes are introduced
The folding is broken in the vectorized versions. We consider time before checking the folded object.
If the numerical aggregator gets passed any other object type for some other reason (like String), then the aggregator considers it to be folded, even though it shouldn’t be. We should convert these objects to the desired type, and aggregate them properly.
The aggregators must properly use generics. This would minimize the ClassCastException issues that can happen with mixed segment types. We are unifying the string first/last aggregators with numeric versions as well.
The aggregators must aggregate null values (https://github.com/apache/druid/blob/master/processing/src/main/java/org/apache/druid/query/aggregation/first/StringFirstLastUtils.java#L55-L56 ). The aggregator should only ignore pairs with time == null, and not value == null
Time nullity is ignored when trying to vectorize the data.
String versions initialized with DateTimes.MIN that is equal to Long.MIN / 2. This can cause incorrect results in case the user enters a custom time column. NOTE: This is still present because it would require a larger refactor in all of the versions.
There is a difference in what users might expect from the results because the code flow is changed (for example, the direction of the for loops, etc), however, this will only change the results, and not the contract set by first/last aggregators, which is that if multiple values have the same timestamp, then any of them can get picked.
If the column is non-existent, the users might expect a change in the timestamp from DateTime.MAX to Long.MAX, because the code incorrectly used DateTime.MAX to initialize the aggregator, however, in case of a custom timestamp column, this might not be the case. The SQL query might be prohibited from using any Long since it requires a cast to the timestamp function that can fail, but AFAICT native queries don't have such limitations.
Changes:
- Add new config `lagAggregate` to `LagBasedAutoScalerConfig`
- Add field `aggregateForScaling` to `LagStats`
- Use the new field/config to determine which aggregate to use to compute lag
- Remove method `Supervisor.computeLagForAutoScaler()`
Changes:
- Add `LookupLoadingSpec` to support 3 modes of lookup loading: ALL, NONE, ONLY_REQUIRED
- Add method `Task.getLookupLoadingSpec()`
- Do not load any lookups for `KillUnusedSegmentsTask`
Changes:
1) Check for handoff of upgraded realtime segments.
2) Drop sink only when all associated realtime segments have been abandoned.
3) Delete pending segments upon commit to prevent unnecessary upgrades and
partition space exhaustion when a concurrent replace happens. This also prevents
potential data duplication.
4) Register pending segment upgrade only on those tasks to which the segment is associated.
Issue: #14989
The initial step in optimizing segment metadata was to centralize the construction of datasource schema in the Coordinator (#14985). Thereafter, we addressed the problem of publishing schema for realtime segments (#15475). Subsequently, our goal is to eliminate the requirement for regularly executing queries to obtain segment schema information.
This is the final change which involves publishing segment schema for finalized segments from task and periodically polling them in the Coordinator.
Tries to address the comments made on #16284 after merged.
Changes:
- Remove method `Supervisor.getLagMetric()`
- Add method `Supervisor.computeLagForAutoScaler()`
- Remove classes `LagMetric` and `LagMetricTest`
Changes:
- Add column `task_allocator_id` to `pendingSegments` metadata table.
- Add column `upgraded_from_segment_id` to `pendingSegments` metadata table.
- Add interface `PendingSegmentAllocatingTask` and implement it by all tasks which
can allocate pending segments.
- Use `taskAllocatorId` to identify the task (and its sub-tasks or replicas) to which
a pending segment has been allocated.
- Perform active cleanup of pending segments in `TaskLockbox` once there are no
active tasks for the corresponding task allocator id.
- When committing APPEND segments, also commit all upgraded pending segments
corresponding to that task allocator id.
- When committing REPLACE segments, upgrade all overlapping pending segments in
the same transaction.
Bug:
#15724 introduced a bug where a rolling upgrade would cause all task locations
returned by the Overlord on an older version to be unknown.
Fix:
If the new API fails, fall back to single task status API which always returns a valid task location.
Follow up to #16217
Changes:
- Update `OverlordClient.getReportAsMap()` to return `TaskReport.ReportMap`
- Move the following classes to `org.apache.druid.indexer.report` in the `druid-processing` module
- `TaskReport`
- `KillTaskReport`
- `IngestionStatsAndErrorsTaskReport`
- `TaskContextReport`
- `TaskReportFileWriter`
- `SingleFileTaskReportFileWriter`
- `TaskReportSerdeTest`
- Remove `MsqOverlordResourceTestClient` as it had only one method
which is already present in `OverlordResourceTestClient` itself
The default value for druid.coordinator.kill.period (if unspecified) has changed from P1D to the value of druid.coordinator.period.indexingPeriod. Operators can choose to override druid.coordinator.kill.period and that will take precedence over the default behavior.
The default value for the coordinator dynamic config killTaskSlotRatio is updated from 1.0 to 0.1. This ensures that that kill tasks take up only 1 task slot right out-of-the-box instead of taking up all the task slots.
* Remove stale comment and inline canDutyRun()
* druid.coordinator.kill.period defaults to druid.coordinator.period.indexingPeriod if not set.
- Remove the default P1D value for druid.coordinator.kill.period. Instead default
druid.coordinator.kill.period to whatever value druid.coordinator.period.indexingPeriod is set
to if the former config isn't specified.
- If druid.coordinator.kill.period is set, the value will take precedence over
druid.coordinator.period.indexingPeriod
* Update server/src/test/java/org/apache/druid/server/coordinator/DruidCoordinatorConfigTest.java
* Fix checkstyle error
* Clarify comment
* Update server/src/main/java/org/apache/druid/server/coordinator/DruidCoordinatorConfig.java
* Put back canDutyRun()
* Default killTaskSlotsRatio to 0.1 instead of 1.0 (all slots)
* Fix typo DEFAULT_MAX_COMPACTION_TASK_SLOTS
* Remove unused test method.
* Update default value of killTaskSlotsRatio in docs and web-console default mock
* Move initDuty() after params and config setup.
* Update error message when topic messages.
Suggest resetting the supervisor when the topic changes instead of changing
the supervisor name which is actually making a new supervisor.
* Update server/src/main/java/org/apache/druid/metadata/IndexerSQLMetadataStorageCoordinator.java
Co-authored-by: Kashif Faraz <kashif.faraz@gmail.com>
* Cleanup
* Remove log and include oldCommitMetadataFromDb
* Fix test
---------
Co-authored-by: Kashif Faraz <kashif.faraz@gmail.com>
Changes:
- Handle exceptions in the API and map them to a `Response` object with the appropriate error code.
- Replace `AuthorizationUtils.filterAuthorizedResources()` with `DatasourceResourceFilter`.
The endpoint is annotated consistent with other usages.
- Update `DatasourceResourceFilter` to remove the lambda and update javadocs.
The usages information is self-evident with an IDE.
- Adjust the invalid interval exception message.
- Break up the large unit test `testGetUnusedSegmentsInDataSource()` into smaller unit tests
for each test case. Also, validate the error codes.
* Differentiate null and empty lists of segment IDs and versions.
Treat them differently so the. Segment IDs and versions can be An empty list,
in which case, the queries should just not return anything. Versions are optional, so
they can be null, which just indicates nothing, so the queries should return segments with
all possible versions. Segment IDs cannot be null as indicated by the absence of @Nullable
annotation.
* Update javadocs and add empty versions test to kill task.
* Add test for RetrieveSegmentsActions as well.
* Add parameterized segment IDs.
* Refactor into one common method.
* Refactor getConditionForIntervalsAndMatchMode - pass in only what's needed.
* Minor cleanup.
Bug:
In the `MarkOvershadowedSegmentsAsUnused` duty, the coordinator marks a segment
as unused if it is overshadowed by a segment currently being served by a historical or broker.
But it is possible to have segments that are eligible for a load rule but require zero replicas
to be loaded. (Such segments can be queried only using the MSQ engine).
If such a zero-replica segment overshadows any other segment, the overshadowed segment will
never be marked as unused and will continue to exist in the metadata store as a dangling segment.
Fix:
- In a coordinator run, keep track of segments that are eligible for a load rule but require zero replicas
- Allow the zero-replicas segments to overshadow old segments and hence mark the latter as unused
Other changes:
- Add simulation test to verify new behaviour. This test fails with the current code.
- Clean up javadocs
Changes:
Add the following indexer level task metrics:
- `worker/task/running/count`
- `worker/task/assigned/count`
- `worker/task/completed/count`
These metrics will provide more visibility into the tasks distribution across indexers
(We often see a task skew issue across indexers and with this issue it would be easier
to catch the imbalance)
* Mark used and unused APIs by versions.
* remove the conditional invocations.
* isValid() and test updates.
* isValid() and tests.
* Remove warning logs for invalid user requests. Also, downgrade visibility.
* Update resp message, etc.
* tests and some cleanup.
* Docs draft
* Clarify docs
* Update server/src/main/java/org/apache/druid/server/http/DataSourcesResource.java
Co-authored-by: Kashif Faraz <kashif.faraz@gmail.com>
* Review comments
* Remove default interface methods only used in tests and update docs.
* Clarify javadocs and @Nullable.
* Add more tests.
* Parameterized versions.
---------
Co-authored-by: Kashif Faraz <kashif.faraz@gmail.com>
* Update Calcite*Test to use junit5
* change the way temp dirs are handled
* add openrewrite workflow to safeguard upgrade
* replace junitparamrunner with standard junit5 parametered tests
* update a few rules to junit5 api
* lots of boring changes
* cleanup QueryLogHook
* cleanup
* fix compile error: ARRAYS_DATASOURCE
* fix test
* remove enclosed
* empty
+TEST:TDigestSketchSqlAggregatorTest,HllSketchSqlAggregatorTest,DoublesSketchSqlAggregatorTest,ThetaSketchSqlAggregatorTest,ArrayOfDoublesSketchSqlAggregatorTest,BloomFilterSqlAggregatorTest,BloomDimFilterSqlTest,CatalogIngestionTest,CatalogQueryTest,FixedBucketsHistogramQuantileSqlAggregatorTest,QuantileSqlAggregatorTest,MSQArraysTest,MSQDataSketchesTest,MSQExportTest,MSQFaultsTest,MSQInsertTest,MSQLoadedSegmentTests,MSQParseExceptionsTest,MSQReplaceTest,MSQSelectTest,InsertLockPreemptedFaultTest,MSQWarningsTest,SqlMSQStatementResourcePostTest,SqlStatementResourceTest,CalciteSelectJoinQueryMSQTest,CalciteSelectQueryMSQTest,CalciteUnionQueryMSQTest,MSQTestBase,VarianceSqlAggregatorTest,SleepSqlTest,SqlRowTransformerTest,DruidAvaticaHandlerTest,DruidStatementTest,BaseCalciteQueryTest,CalciteArraysQueryTest,CalciteCorrelatedQueryTest,CalciteExplainQueryTest,CalciteExportTest,CalciteIngestionDmlTest,CalciteInsertDmlTest,CalciteJoinQueryTest,CalciteLookupFunctionQueryTest,CalciteMultiValueStringQueryTest,CalciteNestedDataQueryTest,CalciteParameterQueryTest,CalciteQueryTest,CalciteReplaceDmlTest,CalciteScanSignatureTest,CalciteSelectQueryTest,CalciteSimpleQueryTest,CalciteSubqueryTest,CalciteSysQueryTest,CalciteTableAppendTest,CalciteTimeBoundaryQueryTest,CalciteUnionQueryTest,CalciteWindowQueryTest,DecoupledPlanningCalciteJoinQueryTest,DecoupledPlanningCalciteQueryTest,DecoupledPlanningCalciteUnionQueryTest,DrillWindowQueryTest,DruidPlannerResourceAnalyzeTest,IngestTableFunctionTest,QueryTestRunner,SqlTestFrameworkConfig,SqlAggregationModuleTest,ExpressionsTest,GreatestExpressionTest,IPv4AddressMatchExpressionTest,IPv4AddressParseExpressionTest,IPv4AddressStringifyExpressionTest,LeastExpressionTest,TimeFormatOperatorConversionTest,CombineAndSimplifyBoundsTest,FiltrationTest,SqlQueryTest,CalcitePlannerModuleTest,CalcitesTest,DruidCalciteSchemaModuleTest,DruidSchemaNoDataInitTest,InformationSchemaTest,NamedDruidSchemaTest,NamedLookupSchemaTest,NamedSystemSchemaTest,RootSchemaProviderTest,SystemSchemaTest,CalciteTestBase,SqlResourceTest
* use @Nested
* add rule to remove enclosed; upgrade surefire
* remove enclosed
* cleanup
* add comment about surefire exclude
* Add update() in TestDerbyConnectorRule
* use common function.
* fixup build.
* fixup indentations.
* Revert "fixup indentations."
This reverts commit a9d6b73e79.
* fixup indentataions.
* Remove Thread.sleep() by directly calling updateUsedStatusLastUpdated.
* another indentation slip.
* Move common segment initialization to setup().
* Fix for checkstyle.
* review comments: indentation fixes, type.
* Wrapper class for Segments table
* Add KillUnusedSegmentsTaskBuilder in test class
* Remove javadocs for self-explanatory methods.
Changes:
- Remove deprecated `DruidException` (old one) and `EntryExistsException`
- Use newly added comprehensive `DruidException` instead
- Update error message in `SqlMetadataStorageActionHandler` when max packet limit is violated.
- Factor out common code from several faults into `BaseFault`.
- Slightly update javadoc in `DruidException` to render it correctly
- Remove unused classes `SegmentToMove`, `SegmentToDrop`
- Move `ServletResourceUtils` from module `druid-processing` to `druid-server`
- Add utility method to build error Response from `DruidException`.
Changes
- Replace usages of `UnknownSegmentIdsException` with `DruidException`
- Add method `SqlMetadataQuery.retrieveSegments`
- Add new field `used` to `DataSegmentPlus`
* Kill task version support.
Kill tasks by default kill all versions of unused segments in the specified
interval. Users wanting to delete specific versions (for example, data compliance
reasons) and keep rest of the versions can specify the optional version in the
kill task payload.
* Formatting changes.
* Multi version tests in RetrieveSegmentsActionsTest
Sort of like method-level parameterized tests.
* Address review feedback
* Accept a list of versions instead of a single version.
Support multiple versions.
* Tests for multiple versions.
* Update docs
* Cleanup
* Address review comments.
Retain the old interface method and make it default and route it to
the method with nullable versions variant. Update usages to use the
default method where versions doesn't matter.
* Remove versions from retreive used segments action.
* Some updates.
* Apply suggestions from code review
Co-authored-by: Kashif Faraz <kashif.faraz@gmail.com>
* /s/actual/observed/g
* minor test cleanup
* WIP: Test fixes and updates. Also add test for kill by version with used load spec.
Checkpoint.
---------
Co-authored-by: Kashif Faraz <kashif.faraz@gmail.com>
Changes:
- Use an actual SqlSegmentsMetadataManager instead of TestSqlSegmentsMetadataManager
- Simplify TestSegmentsMetadataManager
- Add a test for large interval segments.
Changes:
Improve `SqlSegmentsMetadataManager`
- Break the loop in `populateUsedStatusLastUpdated` before going to sleep if there are no more segments to update
- Add comments and clean up logs
Refactor `SqlSegmentsMetadataManagerTest`
- Merge `SqlSegmentsMetadataManagerEmptyTest` into this test
- Add method `testPollEmpty`
- Shave a few seconds off of the tests by reducing poll duration
- Simplify creation of test segments
- Some renames here and there
- Remove unused methods
- Move `TestDerbyConnector.allowLastUsedFlagToBeNull` to this class
Other minor changes
- Add javadoc to `NoneShardSpec`
- Use lambda in `SqlSegmentMetadataPublisher`
While converting Sequence<ScanResultValue> to Sequence<Frames>, when maxSubqueryBytes is enabled, we batch the results to prevent creating a single frame per ScanResultValue. Batching requires peeking into the actual value, and checking if the row signature of the scan result’s value matches that of the previous value.
Since we can do this indefinitely (in the worst case all of them have the same signature), we keep fetching them and accumulating them in a list (on the heap). We don’t really know how much to batch before we actually write the value as frames.
The PR modifies the batching logic to not accumulate the results in an intermediary list
BaseNodeRoleWatcher counts down cacheInitialized after a timeout, but also sets some flag that it was a timed-out initialization. and call nodeViewInitializationTimedOut (new method on listeners) instead of nodeViewInitialized. Then listeners can do what is most appropriate with this information.
* Move retries into DataSegmentPusher implementations.
The individual implementations know better when they should and should
not retry. They can also generate better error messages.
The inspiration for this patch was a situation where EntityTooLarge was
generated by the S3DataSegmentPusher, and retried uselessly by the
retry harness in PartialSegmentMergeTask.
* Fix missing var.
* Adjust imports.
* Tests, comments, style.
* Remove unused import.
Updated the Direct Druid Client so as to make Connection Count Server Selector Strategy work more efficiently.
If creating connection to a node is slow, then that slowness wouldn't be accounted for if we count the open connections after sending the request. So we increment the counter and then send the request.
Currently, while reading results from realtime tasks, requests are sent on a segment level. This is slightly wasteful, as when contacting a data servers, it is possible to transfer results for all segments which it is hosting, instead of only one segment at a time.
One change this PR makes is to group the segments on the basis of servers. This reduces the number of queries to data servers made. Since we don't have access to the number of rows for realtime segments, the grouping is done with a fixed estimated number of rows for each realtime segment.
* All segments stored in the same batch have the same created_date entry.
In the absence of a group_id column, this metadata would allow us to easily
reason about and troubleshoot ingestion-related issues.
* Rename metric name and code references to eligibleUnusedSegments.
Address review comment from https://github.com/apache/druid/pull/15941#discussion_r1503631992
* Kill duty and test improvements.
Initial commit with:
- Bug fixes - auto-kill can throw NPE when there are no datasources present and defaults mismatch.
- Add new stat for candidate segment intervals killed.
- Move a couple of debug logs to info logs for improved visibility (should only log once per kill period).
- Remove redundant checks for code readability.
- Updated tests from using mocks (also the mocks weren't using last updated timestamp) and
add more test coverage for different config parameters.
- Add a couple of unit tests that are ignored for the eternity case to prove that
the kill duty doesn't clean up segments with ALL grain or that end in DateTimes.MAX.
- Migrate Druid exception from user to operator persona.
* Address review comments.
* Remove unused methods.
* fix up format specifier and validate bad config tests.
* Consolidate the helpers a bit more and add another test.
* Update test names. Add javadoc placeholders for slightly involved tests.
* Add docs for metric kill/candidateUnusedSegments/count.
Also, rename to disambiguate.
* Comments.
* Apply logging suggestions from code review
Co-authored-by: Kashif Faraz <kashif.faraz@gmail.com>
* Review comments
- Clarify docs on eligibility.
- Add test for multiple segments in the same interval. Clarify comment.
- Remove log line from test.
- Remove lastUpdatedDate = now.plus(10) from test.
* minor cleanup.
* Clarify javadocs for getUnusedSegmentIntervals().
---------
Co-authored-by: Kashif Faraz <kashif.faraz@gmail.com>
The code in the groupBy engine and the topN engine assume that the dimensions are comparable and can call dimA.compareTo(dimB) to sort the dimensions and group them together.
This works well for the primitive dimensions, because they are Comparable, however falls apart when the dimensions can be arrays (or in future scenarios complex columns). In cases when the dimensions are not comparable, Druid resorts to having a wrapper type ComparableStringArray and ComparableList, which is a Comparable, based on the list comparator.
During ingestion, incremental segments are created in memory for the different time chunks and persisted to disk when certain thresholds are reached (max number of rows, max memory, incremental persist period etc). In the case where there are a lot of dimension and metrics (1000+) it was observed that the creation/serialization of incremental segment file format for persistence and persisting the file took a while and it was blocking ingestion of new data. This affected the real-time ingestion. This serialization and persistence can be parallelized across the different time chunks. This update aims to do that.
The patch adds a simple configuration parameter to the ingestion tuning configuration to specify number of persistence threads. The default value is 1 if it not specified which makes it the same as it is today.
Proposal #13469
Original PR #14024
A new method is being added in QueryLifecycle class to authorise a query based on authentication result.
This method is required since we authenticate the query by intercepting it in the grpc extension and pass down the authentication result.
### Description
The unusedSegment api response was extended to include the original DataSegment object with the creation time and last used update time added to it. A new object `DataSegmentPlus` was created for this purpose, and the metadata queries used were updated as needed.
example response:
```
[
{
"dataSegment": {
"dataSource": "inline_data",
"interval": "2023-01-02T00:00:00.000Z/2023-01-03T00:00:00.000Z",
"version": "2024-01-25T16:06:42.835Z",
"loadSpec": {
"type": "local",
"path": "/Users/zachsherman/projects/opensrc-druid/distribution/target/apache-druid-30.0.0-SNAPSHOT/var/druid/segments/inline_data/2023-01-02T00:00:00.000Z_2023-01-03T00:00:00.000Z/2024-01-25T16:06:42.835Z/0/index/"
},
"dimensions": "str_dim,double_measure1,double_measure2",
"metrics": "",
"shardSpec": {
"type": "numbered",
"partitionNum": 0,
"partitions": 1
},
"binaryVersion": 9,
"size": 1402,
"identifier": "inline_data_2023-01-02T00:00:00.000Z_2023-01-03T00:00:00.000Z_2024-01-25T16:06:42.835Z"
},
"createdDate": "2024-01-25T16:06:44.196Z",
"usedStatusLastUpdatedDate": "2024-01-25T16:07:34.909Z"
}
]
```
* Merge hydrant runners flatly for realtime queries.
Prior to this patch, we have two layers of mergeRunners for realtime
queries: one for each Sink (a logical segment) and one across all
Sinks. This is done because to keep metrics and results grouped by Sink,
given that each FireHydrant within a Sink has its own separate storage
adapter.
However, it costs extra memory usage due to the extra layer of
materialization. This is especially pronounced for groupBy queries,
which only use their merge buffers at the top layer of merging. The
lower layer of merging materializes ResultRows directly into the heap,
which can cause heap exhaustion if there are enough ResultRows.
This patch changes to a single layer of merging when bySegment: false,
just like Historicals. To accommodate that, segment metrics like
query/segment/time are now per-FireHydrant instead of per-Sink.
Two layers of merging are retained when bySegment: true. This isn't
common, because it's typically only used when segment level caching
is enabled on the Broker, which is off by default.
* Use SinkQueryRunners.
* Remove unused method.
* Kill tasks should honor the buffer period of unused segments.
- The coordinator duty KillUnusedSegments determines an umbrella interval
for each datasource to determine the kill interval. There can be multiple unused
segments in an umbrella interval with different used_status_last_updated timestamps.
For example, consider an unused segment that is 30 days old and one that is 1 hour old. Currently
the kill task after the 30-day mark would kill both the unused segments and not retain the 1-hour
old one.
- However, when a kill task is instantiated with this umbrella interval, it’d kill
all the unused segments regardless of the last updated timestamp. We need kill
tasks and RetrieveUnusedSegmentsAction to honor the bufferPeriod to avoid killing
unused segments in the kill interval prematurely.
* Clarify default behavior in docs.
* test comments
* fix canDutyRun()
* small updates.
* checkstyle
* forbidden api fix
* doc fix, unused import, codeql scan error, and cleanup logs.
* Address review comments
* Rename maxUsedFlagLastUpdatedTime to maxUsedStatusLastUpdatedTime
This is consistent with the column name `used_status_last_updated`.
* Apply suggestions from code review
Co-authored-by: Kashif Faraz <kashif.faraz@gmail.com>
* Make period Duration type
* Remove older variants of runKilLTask() in OverlordClient interface
* Test can now run without waiting for canDutyRun().
* Remove previous variants of retrieveUnusedSegments from internal metadata storage coordinator interface.
Removes the following interface methods in favor of a new method added:
- retrieveUnusedSegmentsForInterval(String, Interval)
- retrieveUnusedSegmentsForInterval(String, Interval, Integer)
* Chain stream operations
* cleanup
* Pass in the lastUpdatedTime to markUnused test function and remove sleep.
---------
Co-authored-by: Kashif Faraz <kashif.faraz@gmail.com>
* Reverse, pull up lookups in the SQL planner.
Adds two new rules:
1) ReverseLookupRule, which eliminates calls to LOOKUP by doing
reverse lookups.
2) AggregatePullUpLookupRule, which pulls up calls to LOOKUP above
GROUP BY, when the lookup is injective.
Adds configs `sqlReverseLookup` and `sqlPullUpLookup` to control whether
these rules fire. Both are enabled by default.
To minimize the chance of performance problems due to many keys mapping to
the same value, ReverseLookupRule refrains from reversing a lookup if there
are more keys than `inSubQueryThreshold`. The rationale for using this setting
is that reversal works by generating an IN, and the `inSubQueryThreshold`
describes the largest IN the user wants the planner to create.
* Add additional line.
* Style.
* Remove commented-out lines.
* Fix tests.
* Add test.
* Fix doc link.
* Fix docs.
* Add one more test.
* Fix tests.
* Logic, test updates.
* - Make FilterDecomposeConcatRule more flexible.
- Make CalciteRulesManager apply reduction rules til fixpoint.
* Additional tests, simplify code.
Currently, If 2 tasks are consuming from the same partitions, try to publish the segment and update the metadata, the second task can fail because the end offset stored in the metadata store doesn't match with the start offset of the second task. We can fix this by retrying instead of failing.
AFAIK apart from the above issue, the metadata mismatch can happen in 2 scenarios:
- when we update the input topic name for the data source
- when we run 2 replicas of ingestion tasks(1 replica will publish and 1 will fail as the first replica has already updated the metadata).
Implemented the comparable function to compare the last committed end offset and new Sequence start offset. And return a specific error msg for this.
Add retry logic on indexers to retry for this specific error msg.
Updated the existing test case.
The initial step in optimizing segment metadata was to centralize the construction of datasource schema in the Coordinator (#14985). Subsequently, our goal is to eliminate the requirement for regularly executing queries to obtain segment schema information. This task encompasses addressing both realtime and finalized segments.
This modification specifically addresses the issue with realtime segments. Tasks will now routinely communicate the schema for realtime segments during the segment announcement process. The Coordinator will identify the schema alongside the segment announcement and subsequently update the schema for realtime segments in the metadata cache.
This PR enables the flag by default to queue excess query requests in the jetty queue. Still keeping the flag so that it can be turned off if necessary. But the flag will be removed in the future.
* Allow overwriting ServerConnector accept queue size
* Use a single config
* Fix spacing
* fix spacing
* fixed value
* read value from environment
* fix spacing
* Unpack value before reading
* check somaxconn on linux only
* Reverse lookup fixes and enhancements.
1) Add a "mayIncludeUnknown" parameter to DimFilter#optimize. This is important
because otherwise the reverse-lookup optimization is done improperly when
the "in" filter appears under a "not", and the lookup extractionFn may return
null for some possible values of the filtered column. The "includeUnknown" test
cases in InDimFilterTest illustrate the difference in behavior.
2) Enhance InDimFilter#optimizeLookup to handle "mayIncludeUnknown", and to be able
to do a reverse lookup in a wider variety of cases.
3) Make "unapply" protected in LookupExtractor, and move callers to "unapplyAll".
The main reason is that MapLookupExtractor, a common implementation, lacks a
reverse mapping and therefore does a scan of the map for each call to "unapply".
For performance sake these calls need to be batched.
* Remove optimize call from BloomDimFilter.
* Follow the law.
* Fix tests.
* Fix imports.
* Switch function.
* Fix tests.
* More tests.
* Minor fixes
* Update docs/development/extensions-contrib/prometheus.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
---------
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
Currently in the realtime ingestion (Kafka/Kinesis) case, after publishing the segments, upon acknowledgement from the coordinator that the segments are already placed in some historicals, the peon would unannounce the segments (basically saying the segments are not in this peon anymore to the whole cluster) and drop the segments from cache and sink timeline in one shot.
The in transit queries from the brokers that still thinks the segments are in the peon can get a NullPointer exception when the peon is unsetting the hydrants in the sinks.
The fix would let the peon to wait for a configurable delay period before dropping segments, remove segments from cache etc after the peon unannounce the segments.
This delayed approach is similar to how the historicals handle segments moving out.
Changes
- Add `log` implementation for `AuditManager` alongwith `SQLAuditManager`
- `LoggingAuditManager` simply logs the audit event. Thus, it returns empty for
all `fetchAuditHistory` calls.
- Add new config `druid.audit.manager.type` which can take values `log`, `sql` (default)
- Add new config `druid.audit.manager.logLevel` which can take values `DEBUG`, `INFO`, `WARN`.
This gets activated only if `type` is `log`.
- Remove usage of `ConfigSerde` from `AuditManager` as audit is not just limited to configs
- Add `AuditSerdeHelper` for a single implementation of serialization/deserialization of
audit payload and other utility methods.
The segment allocation algorithm reuses an already allocated pending segment if the new allocation request is made for the same parameters:
datasource
sequence name
same interval
same value of skipSegmentLineageCheck (false for batch append, true for streaming append)
same previous segment id (used only when skipSegmentLineageCheck = false)
The above parameters can thus uniquely identify a pending segment (enforced by the UNIQUE constraint on the sequence_name_prev_id_sha1 column in druid_pendingSegments metadata table).
This reuse is done in order to
allow replica tasks (in case of streaming ingestion) to use the same set of segment IDs.
allow re-run of a failed batch task to use the same segment ID and prevent unnecessary allocations
This PR builds on #13304 to skip compaction for datasources with segments that have their interval start or end coinciding with Eternity interval end-points.
This is needed in order to prevent an issue similar to #13208 as the Coordinator tries to iterate over a large number of intervals when trying to compact an interval with infinite start or end.
Kashif Faraz
Clint Wylie
Zoltan Haindrich
George Shiqi Wu
Akshat Jain
kaisun2000
Igor Berman
Rishabh Singh
Alberic Liu
Abhishek Radhakrishnan
zachjsh
AmatyaAvadhanula
Gian Merlino
Laksh Singla
Adithya Chakilam
Andreas Maechler
Adarsh Sanjeev
aho135
Arun Ramani
Rushikesh Bankar
Parth Agrawal
Sree Charan Manamala
Sensor
Bartosz Mikulski
Pramod Immaneni
Abhishek Agarwal
Karan Kumar
Sam Rash
PANKAJ KUMAR
Pranav
Jonathan Wei