* Add interface method for returning canonical lookup name
* Address review comment
* Add test in LookupReferencesManagerTest for coverage check
* Add test in LookupSerdeModuleTest for coverage check
Changes:
- Add `LookupLoadingSpec` to support 3 modes of lookup loading: ALL, NONE, ONLY_REQUIRED
- Add method `Task.getLookupLoadingSpec()`
- Do not load any lookups for `KillUnusedSegmentsTask`
Issue: #14989
The initial step in optimizing segment metadata was to centralize the construction of datasource schema in the Coordinator (#14985). Thereafter, we addressed the problem of publishing schema for realtime segments (#15475). Subsequently, our goal is to eliminate the requirement for regularly executing queries to obtain segment schema information.
This is the final change which involves publishing segment schema for finalized segments from task and periodically polling them in the Coordinator.
Follow up to #16217
Changes:
- Update `OverlordClient.getReportAsMap()` to return `TaskReport.ReportMap`
- Move the following classes to `org.apache.druid.indexer.report` in the `druid-processing` module
- `TaskReport`
- `KillTaskReport`
- `IngestionStatsAndErrorsTaskReport`
- `TaskContextReport`
- `TaskReportFileWriter`
- `SingleFileTaskReportFileWriter`
- `TaskReportSerdeTest`
- Remove `MsqOverlordResourceTestClient` as it had only one method
which is already present in `OverlordResourceTestClient` itself
Changes:
- Add `TaskContextEnricher` interface to improve task management and monitoring
- Invoke `enrichContext` in `TaskQueue.add()` whenever a new task is submitted to the Overlord
- Add `TaskContextReport` to write out task context information in reports
Changes:
Add the following indexer level task metrics:
- `worker/task/running/count`
- `worker/task/assigned/count`
- `worker/task/completed/count`
These metrics will provide more visibility into the tasks distribution across indexers
(We often see a task skew issue across indexers and with this issue it would be easier
to catch the imbalance)
During ingestion, incremental segments are created in memory for the different time chunks and persisted to disk when certain thresholds are reached (max number of rows, max memory, incremental persist period etc). In the case where there are a lot of dimension and metrics (1000+) it was observed that the creation/serialization of incremental segment file format for persistence and persisting the file took a while and it was blocking ingestion of new data. This affected the real-time ingestion. This serialization and persistence can be parallelized across the different time chunks. This update aims to do that.
The patch adds a simple configuration parameter to the ingestion tuning configuration to specify number of persistence threads. The default value is 1 if it not specified which makes it the same as it is today.
MSQ now allows empty ingest queries by default. For such queries that don't generate any output rows, the query counters in the async status result object/task report don't contain numTotalRows and totalSizeInBytes. These properties when not set/undefined can be confusing to API clients. For example, the web-console treats it as unknown values.
This patch fixes the counters by explicitly reporting them as 0 instead of null for empty ingest queries.
The initial step in optimizing segment metadata was to centralize the construction of datasource schema in the Coordinator (#14985). Subsequently, our goal is to eliminate the requirement for regularly executing queries to obtain segment schema information. This task encompasses addressing both realtime and finalized segments.
This modification specifically addresses the issue with realtime segments. Tasks will now routinely communicate the schema for realtime segments during the segment announcement process. The Coordinator will identify the schema alongside the segment announcement and subsequently update the schema for realtime segments in the metadata cache.
Changes
- Add `log` implementation for `AuditManager` alongwith `SQLAuditManager`
- `LoggingAuditManager` simply logs the audit event. Thus, it returns empty for
all `fetchAuditHistory` calls.
- Add new config `druid.audit.manager.type` which can take values `log`, `sql` (default)
- Add new config `druid.audit.manager.logLevel` which can take values `DEBUG`, `INFO`, `WARN`.
This gets activated only if `type` is `log`.
- Remove usage of `ConfigSerde` from `AuditManager` as audit is not just limited to configs
- Add `AuditSerdeHelper` for a single implementation of serialization/deserialization of
audit payload and other utility methods.
Query with lookups in FilteredAggregator fails with this exception in router,
Cannot construct instance of `org.apache.druid.query.aggregation.FilteredAggregatorFactory`, problem: Lookup [campaigns_lookup[campaignId][is_sold][autodsp]] not found at [Source: (org.eclipse.jetty.server.HttpInputOverHTTP); line: 1, column: 913] (through reference chain: org.apache.druid.query.groupby.GroupByQuery["aggregations"]->java.util.ArrayList[1])
T
he problem is that constructor of FilteredAggregatorFactory is actually validating if the lookup exists in this statement dimFilter.toFilter().
This is failing on the router, which is to be expected, because, the router isn’t assigned any lookups.
The fix is to move to a lazy initialisation of the filter object in the constructor.
In the current design, brokers query both data nodes and tasks to fetch the schema of the segments they serve. The table schema is then constructed by combining the schemas of all segments within a datasource. However, this approach leads to a high number of segment metadata queries during broker startup, resulting in slow startup times and various issues outlined in the design proposal.
To address these challenges, we propose centralizing the table schema management process within the coordinator. This change is the first step in that direction. In the new arrangement, the coordinator will take on the responsibility of querying both data nodes and tasks to fetch segment schema and subsequently building the table schema. Brokers will now simply query the Coordinator to fetch table schema. Importantly, brokers will still retain the capability to build table schemas if the need arises, ensuring both flexibility and resilience.
* Use min of scheduler threads and server threads for subquery guardrails.
This allows more memory to be used for subqueries when the query scheduler
is configured to limit queries below the number of server threads. The patch
also refactors the code so SubqueryGuardrailHelper is provided by a Guice
Provider rather than being created by ClientQuerySegmentWalker, to achieve
better separation of concerns.
* Exclude provider from coverage.
This change updates dependencies as needed and fixes tests to remove code incompatible with Java 21
As a result all unit tests now pass with Java 21.
* update maven-shade-plugin to 3.5.0 and follow-up to #15042
* explain why we need to override configuration when specifying outputFile
* remove configuration from dependency management in favor of explicit overrides in each module.
* update to mockito to 5.5.0 for Java 21 support when running with Java 11+
* continue using latest mockito 4.x (4.11.0) when running with Java 8
* remove need to mock private fields
* exclude incorrectly declared mockito dependency from pac4j-oidc
* remove mocking of ByteBuffer, since sealed classes can no longer be mocked in Java 21
* add JVM options workaround for system-rules junit plugin not supporting Java 18+
* exclude older versions of byte-buddy from assertj-core
* fix for Java 19 changes in floating point string representation
* fix missing InitializedNullHandlingTest
* update easymock to 5.2.0 for Java 21 compatibility
* update animal-sniffer-plugin to 1.23
* update nl.jqno.equalsverifier to 3.15.1
* update exec-maven-plugin to 3.1.0
This change is meant to fix a issue where passing too large of a task payload to the mm-less task runner will cause the peon to fail to startup because the payload is passed (compressed) as a environment variable (TASK_JSON). In linux systems the limit for a environment variable is commonly 128KB, for windows systems less than this. Setting a env variable longer than this results in a bunch of "Argument list too long" errors.
Changes:
- Add task context parameter `taskLockType`. This determines the type of lock used by a batch task.
- Add new task actions for transactional replace and append of segments
- Add methods StorageCoordinator.commitAppendSegments and commitReplaceSegments
- Upgrade segments to appropriate versions when performing replace and append
- Add new metadata table `upgradeSegments` to track segments that need to be upgraded
- Add tests
Changes:
- Move following configs from `CliCoordinator` to `DruidCoordinatorConfig`:
- `druid.coordinator.kill.on`
- `druid.coordinator.kill.pendingSegments.on`
- `druid.coordinator.kill.supervisors.on`
- `druid.coordinator.kill.rules.on`
- `druid.coordinator.kill.audit.on`
- `druid.coordinator.kill.datasource.on`
- `druid.coordinator.kill.compaction.on`
- In the Coordinator style used by historical management duties, always instantiate all
the metadata cleanup duties but execute only if enabled. In the existing code, they are
instantiated only when enabled by using optional binding with Guice.
- Add a wrapper `MetadataManager` which contains handles to all the different
metadata managers for rules, supervisors, segments, etc.
- Add a `CoordinatorConfigManager` to simplify read and update of coordinator configs
- Remove persistence related methods from `CoordinatorCompactionConfig` and
`CoordinatorDynamicConfig` as these are config classes.
- Remove annotations `@CoordinatorIndexingServiceDuty`,
`@CoordinatorMetadataStoreManagementDuty`
changes:
* add back nested column v4 serializers
* 'json' schema by default still uses the newer 'nested common format' used by 'auto', but now has an optional 'formatVersion' property which can be specified to override format versions on native ingest jobs
* add system config to specify default column format stuff, 'druid.indexing.formats', and property 'druid.indexing.formats.nestedColumnFormatVersion' to specify system level preferred nested column format for friendly rolling upgrades from versions which do not support the newer 'nested common format' used by 'auto'
* save work
* Working
* Fix runner constructor
* Working runner
* extra log lines
* try using lifecycle for everything
* clean up configs
* cleanup /workers call
* Use a single config
* Allow selecting runner
* debug changes
* Work on composite task runner
* Unit tests running
* Add documentation
* Add some javadocs
* Fix spelling
* Use standard libraries
* code review
* fix
* fix
* use taskRunner as string
* checkstyl
---------
Co-authored-by: Suneet Saldanha <suneet@apache.org>
Changes:
- Add new metric `kill/pendingSegments/count` with dimension `dataSource`
- Add tests for `KillStalePendingSegments`
- Reduce no-op logs that spit out for each datasource even when no pending
segments have been deleted. This can get particularly noisy at low values of `indexingPeriod`.
- Refactor the code in `KillStalePendingSegments` for readability and add javadocs
A new monitor SubqueryCountStatsMonitor which emits the metrics corresponding to the subqueries and their execution is now introduced. Moreover, the user can now also use the auto mode to automatically set the number of bytes available per query for the inlining of its subquery's results.
Changes:
- Move logic of `NewestSegmentFirstIterator.needsCompaction` to `CompactionStatus`
to improve testability and readability
- Capture the list of checks performed to determine if compaction is needed in a readable
manner in `CompactionStatus.CHECKS`
- Make `CompactionSegmentIterator` iterate over instances of `SegmentsToCompact`
instead of `List<DataSegment>`. This allows use of the `umbrellaInterval` later.
- Replace usages of `QueueEntry` with `SegmentsToCompact`
- Move `SegmentsToCompact` out of `NewestSegmentFirstIterator`
- Simplify `CompactionStatistics`
- Reduce level of less important logs to debug
- No change made to tests to ensure correctness
Follow up changes to #12599
Changes:
- Rename column `used_flag_last_updated` to `used_status_last_updated`
- Remove new CLI tool `UpdateTables`.
- We already have a `CreateTables` with similar functionality, which should be able to
handle update cases too.
- Any user running the cluster for the first time should either just have `connector.createTables`
enabled or run `CreateTables` which should create tables at the latest version.
- For instance, the `UpdateTables` tool would be inadequate when a new metadata table has
been added to Druid, and users would have to run `CreateTables` anyway.
- Remove `upgrade-prep.md` and include that info in `metadata-init.md`.
- Fix log messages to adhere to Druid style
- Use lambdas
* Add new configurable buffer period to create gap between mark unused and kill of segment
* Changes after testing
* fixes and improvements
* changes after initial self review
* self review changes
* update sql statement that was lacking last_used
* shore up some code in SqlMetadataConnector after self review
* fix derby compatibility and improve testing/docs
* fix checkstyle violations
* Fixes post merge with master
* add some unit tests to improve coverage
* ignore test coverage on new UpdateTools cli tool
* another attempt to ignore UpdateTables in coverage check
* change column name to used_flag_last_updated
* fix a method signature after column name switch
* update docs spelling
* Update spelling dictionary
* Fixing up docs/spelling and integrating altering tasks table with my alteration code
* Update NULL values for used_flag_last_updated in the background
* Remove logic to allow segs with null used_flag_last_updated to be killed regardless of bufferPeriod
* remove unneeded things now that the new column is automatically updated
* Test new background row updater method
* fix broken tests
* fix create table statement
* cleanup DDL formatting
* Revert adding columns to entry table by default
* fix compilation issues after merge with master
* discovered and fixed metastore inserts that were breaking integration tests
* fixup forgotten insert by using pattern of sharing now timestamp across columns
* fix issue introduced by merge
* fixup after merge with master
* add some directions to docs in the case of segment table validation issues
* Merge core CoordinatorClient with MSQ CoordinatorServiceClient.
Continuing the work from #12696, this patch merges the MSQ
CoordinatorServiceClient into the core CoordinatorClient, yielding a single
interface that serves both needs and is based on the ServiceClient RPC
system rather than DruidLeaderClient.
Also removes the backwards-compatibility code for the handoff API in
CoordinatorBasedSegmentHandoffNotifier, because the new API was added
in 0.14.0. That's long enough ago that we don't need backwards
compatibility for rolling updates.
* Fixups.
* Trigger GHA.
* Remove unnecessary retrying in DruidInputSource. Add "about an hour"
retry policy and h
* EasyMock
* Use OverlordClient for all Overlord RPCs.
Continuing the work from #12696, this patch removes HttpIndexingServiceClient
and the IndexingService flavor of DruidLeaderClient completely. All remaining
usages are migrated to OverlordClient.
Supporting changes include:
1) Add a variety of methods to OverlordClient.
2) Update MetadataTaskStorage to skip the complete-task lookup when
the caller requests zero completed tasks. This helps performance of
the "get active tasks" APIs, which don't want to see complete ones.
* Use less forbidden APIs.
* Fixes from CI.
* Add test coverage.
* Two more tests.
* Fix test.
* Updates from CR.
* Remove unthrown exceptions.
* Refactor to improve testability and test coverage.
* Add isNil tests.
* Remove unnecessary "deserialize" methods.
This PR uses the QoSFilter available in Jetty to park the query requests that exceed a configured limit. This is done so that other HTTP requests such as health check calls do not get blocked if the query server is busy serving long-running queries. The same mechanism can also be used in the future to isolate interactive queries from long-running select queries from interactive queries within the same broker.
Right now, you can still get that isolation by setting druid.query.scheduler.numThreads to a value lowe than druid.server.http.numThreads. That enables total laning but the side effect is that excess requests are not queued and rejected outright that leads to a bad user experience.
Parked requests are timed out after 30 seconds by default. I overrode that to the maxQueryTimeout in this PR.
changes:
* new filters that preserve match value typing to better handle filtering different column types
* sql planner uses new filters by default in sql compatible null handling mode
* remove isFilterable from column capabilities
* proper handling of array filtering, add array processor to column processors
* javadoc for sql test filter functions
* range filter support for arrays, tons more tests, fixes
* add dimension selector tests for mixed type roots
* support json equality
* rename semantic index maker thingys to mostly have plural names since they typically make many indexes, e.g. StringValueSetIndex -> StringValueSetIndexes
* add cooler equality index maker, ValueIndexes
* fix missing string utf8 index supplier
* expression array comparator stuff
* Add aggregatorMergeStrategy property to SegmentMetadaQuery.
- Adds a new property aggregatorMergeStrategy to segmentMetadata query.
aggregatorMergeStrategy currently supports three types of merge strategies -
the legacy strict and lenient strategies, and the new latest strategy.
- The latest strategy considers the latest aggregator from the latest segment
by time order when there's a conflict when merging aggregators from different
segments.
- Deprecate lenientAggregatorMerge property; The API validates that both the new
and old properties are not set, and returns an exception.
- When merging segments as part of segmentMetadata query, the segments have a more
elaborate id -- <datasource>_<interval>_merged_<partition_number> format, similar to
the name format that segments usually contain. Previously it was simply "merged".
- Adjust unit tests to test the latest strategy, to assert the returned complete
SegmentAnalysis object instead of just the aggregators for completeness.
* Don't explicitly set strict strategy in tests
* Apply suggestions from code review
Co-authored-by: Katya Macedo <38017980+ektravel@users.noreply.github.com>
* Update docs/querying/segmentmetadataquery.md
* Apply suggestions from code review
Co-authored-by: Katya Macedo <38017980+ektravel@users.noreply.github.com>
---------
Co-authored-by: Katya Macedo <38017980+ektravel@users.noreply.github.com>
* combine string column implementations
changes:
* generic indexed, front-coded, and auto string columns now all share the same column and index supplier implementations
* remove CachingIndexed implementation, which I think is largely no longer needed by the switch of many things to directly using ByteBuffer, avoiding the cost of creating Strings
* remove ColumnConfig.columnCacheSizeBytes since CachingIndexed was the only user
* Add OverlordStatusMonitor and CoordinatorStatusMonitor to monitor service leader status
* make the monitor more general
* resolve conflict
* use Supplier pattern to provide metrics
* reformat code and doc
* move service specific tag to dimension
* minor refine
* update doc
* reformat code
* address comments
* remove declared exception
* bind HeartbeatSupplier conditionally in Coordinator
Changes:
- Add property `useDefaultTierForNull` for all load rules. This property determines the default
value of `tieredReplicants` if it is not specified. When true, the default is `_default_tier => 2 replicas`.
When false, the default is empty, i.e. no replicas on any tier.
- Fix validation to allow empty replicants map, so that the segment is used but not loaded anywhere.
This commit does a complete revamp of the coordinator to address problem areas:
- Stability: Fix several bugs, add capabilities to prioritize and cancel load queue items
- Visibility: Add new metrics, improve logs, revamp `CoordinatorRunStats`
- Configuration: Add dynamic config `smartSegmentLoading` to automatically set
optimal values for all segment loading configs such as `maxSegmentsToMove`,
`replicationThrottleLimit` and `maxSegmentsInNodeLoadingQueue`.
Changed classes:
- Add `StrategicSegmentAssigner` to make assignment decisions for load, replicate and move
- Add `SegmentAction` to distinguish between load, replicate, drop and move operations
- Add `SegmentReplicationStatus` to capture current state of replication of all used segments
- Add `SegmentLoadingConfig` to contain recomputed dynamic config values
- Simplify classes `LoadRule`, `BroadcastRule`
- Simplify the `BalancerStrategy` and `CostBalancerStrategy`
- Add several new methods to `ServerHolder` to track loaded and queued segments
- Refactor `DruidCoordinator`
Impact:
- Enable `smartSegmentLoading` by default. With this enabled, none of the following
dynamic configs need to be set: `maxSegmentsToMove`, `replicationThrottleLimit`,
`maxSegmentsInNodeLoadingQueue`, `useRoundRobinSegmentAssignment`,
`emitBalancingStats` and `replicantLifetime`.
- Coordinator reports richer metrics and produces cleaner and more informative logs
- Coordinator uses an unlimited load queue for all serves, and makes better assignment decisions
Akshat Jain
Kashif Faraz
Adarsh Sanjeev
Rishabh Singh
Laksh Singla
YongGang
Rushikesh Bankar
gzhao9
Pramod Immaneni
Karan Kumar
Abhishek Radhakrishnan
Gian Merlino
Atul Mohan
Clint Wylie
Xavier Léauté
George Shiqi Wu
AmatyaAvadhanula
George Shiqi Wu
Lucas Capistrant
Tejaswini Bandlamudi
Suneet Saldanha
Abhishek Agarwal