* SQL tests: avoid mixing skip and cannot vectorize.
skipVectorize switches off vectorization tests completely, and
cannotVectorize turns vectorization tests into negative tests. It doesn't
make sense to use them together, so this patch makes it an error to do so,
and cleans up cases where both are mentioned.
This patch also has the effect of changing various tests from skipVectorize
to cannotVectorize, because in the past when both were mentioned,
skipVectorize would take priority.
* Fix bug with StringAnyAggregatorFactory attempting to vectorize when it cannt.
* Fix tests.
Compaction in the native engine by default records the state of compaction for each segment in the lastCompactionState segment field. This PR adds support for doing the same in the MSQ engine, targeted for future cases such as REPLACE and compaction done via MSQ.
Note that this PR doesn't implicitly store the compaction state for MSQ replace tasks; it is stored with flag "storeCompactionState": true in the query context.
Current Runtime Exceptions generated while writing frames only include the exception itself without including the name of the column they were encountered in. This patch introduces the further information in the error and makes it non-retryable.
* Allow typedIn to run in replace-with-default mode.
Useful when data servers, like Historicals, are running in replace-with-default
mode and the Broker is running in SQL-compatible mode, which can happen during
a rolling update that is applying a mode change.
The name of the combining filtered aggregator factory should be the same
as the name of the original factory. However, it wasn't the same in the
case where the original factory's name and the original delegate aggregator
were inconsistently named. In this scenario, we should use the name of
the original filtered aggregator, not the name of the original delegate
aggregator.
This PR creates an interface for ImmutableRTree and moved the existing implementation to new class which represent 32 bit implementation (stores coordinate as floats). This PR makes the ImmutableRTree extendable to create higher precision implementation as well (64 bit).
In all spatial bound filters, we accept float as input which might not be accurate in the case of high precision implementation of ImmutableRTree. This PR changed the bound filters to accepts the query bounds as double instead of float and it is backward compatible change as it compares double to existing float values in RTree. Previously it was comparing input float to RTree floats which can cause precision loss, now it is little better as it compares double to float which is still not 100% accurate.
There are no changes in the way that we query spatial dimension today except input bound parsing. There is little improvement in string filter predicate which now parse double strings instead of float and compares double to double which is 100% accurate but string predicate is only called when we dont have spatial index.
With allowing the interface to extend ImmutableRTree, we allow to create high precision (HP) implementation and defines new search strategies to perform HP search Iterable<ImmutableBitmap> search(ImmutableDoubleNode node, Bound bound);
With possible HP implementations, Radius bound filter can not really focus on accuracy, it is calculating Euclidean distance in comparing. As EARTH 🌍 is round and not flat, Euclidean distances are not accurate in geo system. This PR adds new param called 'radiusUnit' which allows you to specify units like meters, km, miles etc. It uses https://en.wikipedia.org/wiki/Haversine_formula to check if given geo point falls inside circle or not. Added a test that generates set of points inside and outside in RadiusBoundTest.
This PR aims to introduce Window functions on MSQ by doing the following:
Introduce a Window querykit for handling window queries along with its factory and a processor for window queries
If a window operator is present with a partition by clause, pushes the partition as a shuffle spec of the previous stage
In presence of empty OVER() clause lets all operators loose on a single rac
In presence of no empty OVER() clause, breaks down each window into individual stages
Associated machinery to handle window functions in MSQ
Introduced a separate hidden engine feature WINDOW_LEAF_OPERATOR which is set only for MSQ engine. In presence of this feature, the planner plans without the leaf operators by creating a window query over an inner scan query. In case of native this is set to false and the planner generates the leafOperators
Guardrails around materialization
Comprehensive UTs
Changes:
- Handle exceptions in the API and map them to a `Response` object with the appropriate error code.
- Replace `AuthorizationUtils.filterAuthorizedResources()` with `DatasourceResourceFilter`.
The endpoint is annotated consistent with other usages.
- Update `DatasourceResourceFilter` to remove the lambda and update javadocs.
The usages information is self-evident with an IDE.
- Adjust the invalid interval exception message.
- Break up the large unit test `testGetUnusedSegmentsInDataSource()` into smaller unit tests
for each test case. Also, validate the error codes.
* Avoid conversion to String in JsonReader, JsonNodeReader.
These readers were running UTF-8 decode on the provided entity to
convert it to a String, then parsing the String as JSON. The patch
changes them to parse the provided entity's input stream directly.
In order to preserve the nice error messages that include parse errors,
the readers now need to open the entity again on the error path, to
re-read the data. To make this possible, the InputEntity#open contract
is tightened to require the ability to re-open entities, and existing
InputEntity implementations are updated to allow re-opening.
This patch also renames JsonLineReaderBenchmark to JsonInputFormatBenchmark,
updates it to benchmark all three JSON readers, and adds a case that reads
fields out of the parsed row (not just creates it).
* Fixes for static analysis.
* Implement intermediateRowAsString in JsonReader.
* Enhanced JsonInputFormatBenchmark.
Renames JsonLineReaderBenchmark to JsonInputFormatBenchmark, and enhances it to
test various readers (JsonReader, JsonLineReader, JsonNodeReader) as well as
to test with/without field discovery.
This commit allows to use the MV_FILTER_ONLY & MV_FILTER_NONE functions
with a non literal argument.
Currently `select mv_filter_only('mvd_dim', 'array_dim') from 'table'`
returns a `Unhandled Query Planning Failure`
This is being tackled and also considered for the cases where the `array_dim`
having null & empty values.
Changed classes:
* `MultiValueStringOperatorConversions`
* `ApplyFunction`
* `CalciteMultiValueStringQueryTest`
Changes:
- Use error code `internalServerError` for failures of this type
- Remove the error code argument from `InternalServerError.exception()` methods
thus fixing a bug in the callers.
changes:
* adds TypedInFilter which preserves matching sets in the native match value type
* SQL planner uses new TypedInFilter when druid.generic.useDefaultValueForNull=false (the default)
* SortMerge join support for IS NOT DISTINCT FROM.
The patch adds a "requiredNonNullKeyParts" field to the sortMerge
processor, which has the list of key parts that must be nonnull for
an equijoin condition to match. Conditions with SQL "=" are present in
the list; conditions with SQL "IS NOT DISTINCT FROM" are absent from
the list.
* Fix test.
* Update javadoc.
* Update Calcite*Test to use junit5
* change the way temp dirs are handled
* add openrewrite workflow to safeguard upgrade
* replace junitparamrunner with standard junit5 parametered tests
* update a few rules to junit5 api
* lots of boring changes
* cleanup QueryLogHook
* cleanup
* fix compile error: ARRAYS_DATASOURCE
* fix test
* remove enclosed
* empty
+TEST:TDigestSketchSqlAggregatorTest,HllSketchSqlAggregatorTest,DoublesSketchSqlAggregatorTest,ThetaSketchSqlAggregatorTest,ArrayOfDoublesSketchSqlAggregatorTest,BloomFilterSqlAggregatorTest,BloomDimFilterSqlTest,CatalogIngestionTest,CatalogQueryTest,FixedBucketsHistogramQuantileSqlAggregatorTest,QuantileSqlAggregatorTest,MSQArraysTest,MSQDataSketchesTest,MSQExportTest,MSQFaultsTest,MSQInsertTest,MSQLoadedSegmentTests,MSQParseExceptionsTest,MSQReplaceTest,MSQSelectTest,InsertLockPreemptedFaultTest,MSQWarningsTest,SqlMSQStatementResourcePostTest,SqlStatementResourceTest,CalciteSelectJoinQueryMSQTest,CalciteSelectQueryMSQTest,CalciteUnionQueryMSQTest,MSQTestBase,VarianceSqlAggregatorTest,SleepSqlTest,SqlRowTransformerTest,DruidAvaticaHandlerTest,DruidStatementTest,BaseCalciteQueryTest,CalciteArraysQueryTest,CalciteCorrelatedQueryTest,CalciteExplainQueryTest,CalciteExportTest,CalciteIngestionDmlTest,CalciteInsertDmlTest,CalciteJoinQueryTest,CalciteLookupFunctionQueryTest,CalciteMultiValueStringQueryTest,CalciteNestedDataQueryTest,CalciteParameterQueryTest,CalciteQueryTest,CalciteReplaceDmlTest,CalciteScanSignatureTest,CalciteSelectQueryTest,CalciteSimpleQueryTest,CalciteSubqueryTest,CalciteSysQueryTest,CalciteTableAppendTest,CalciteTimeBoundaryQueryTest,CalciteUnionQueryTest,CalciteWindowQueryTest,DecoupledPlanningCalciteJoinQueryTest,DecoupledPlanningCalciteQueryTest,DecoupledPlanningCalciteUnionQueryTest,DrillWindowQueryTest,DruidPlannerResourceAnalyzeTest,IngestTableFunctionTest,QueryTestRunner,SqlTestFrameworkConfig,SqlAggregationModuleTest,ExpressionsTest,GreatestExpressionTest,IPv4AddressMatchExpressionTest,IPv4AddressParseExpressionTest,IPv4AddressStringifyExpressionTest,LeastExpressionTest,TimeFormatOperatorConversionTest,CombineAndSimplifyBoundsTest,FiltrationTest,SqlQueryTest,CalcitePlannerModuleTest,CalcitesTest,DruidCalciteSchemaModuleTest,DruidSchemaNoDataInitTest,InformationSchemaTest,NamedDruidSchemaTest,NamedLookupSchemaTest,NamedSystemSchemaTest,RootSchemaProviderTest,SystemSchemaTest,CalciteTestBase,SqlResourceTest
* use @Nested
* add rule to remove enclosed; upgrade surefire
* remove enclosed
* cleanup
* add comment about surefire exclude
Changes:
- Remove deprecated `DruidException` (old one) and `EntryExistsException`
- Use newly added comprehensive `DruidException` instead
- Update error message in `SqlMetadataStorageActionHandler` when max packet limit is violated.
- Factor out common code from several faults into `BaseFault`.
- Slightly update javadoc in `DruidException` to render it correctly
- Remove unused classes `SegmentToMove`, `SegmentToDrop`
- Move `ServletResourceUtils` from module `druid-processing` to `druid-server`
- Add utility method to build error Response from `DruidException`.
changes:
* fix issues with array_contains and array_overlap with null left side arguments
* modify singleThreaded stuff to allow optimizing Function similar to how we do for ExprMacro - removed SingleThreadSpecializable in favor of default impl of asSingleThreaded on Expr with clear javadocs that most callers shouldn't be calling it directly and should be using Expr.singleThreaded static method which uses a shuttle and delegates to asSingleThreaded instead
* add optimized 'singleThreaded' versions of array_contains and array_overlap
* add mv_harmonize_nulls native expression to use with MV_CONTAINS and MV_OVERLAP to allow them to behave consistently with filter rewrites, coercing null and [] into [null]
* fix bug with casting rhs argument for native array_contains and array_overlap expressions
ConcurrentGrouper kind of misuses ThreadLocal to hold a SpillingGrouper, and never calls remove() on it, which can result in large amounts of heap being retained as weak references even after grouping is finished. This PR calls keySerde.reset() on all of the Grouper.close() implementations that have a KeySerde and should free up a bunch of space that is no longer needed.
The previously used GCS API client library returned last update time for objects directly in milliseconds. The new library returns it in OffsetDateTime format which was being converted to seconds and stored against the object. This fix converts the time back to ms before storing it.
Changes:
Improve `SqlSegmentsMetadataManager`
- Break the loop in `populateUsedStatusLastUpdated` before going to sleep if there are no more segments to update
- Add comments and clean up logs
Refactor `SqlSegmentsMetadataManagerTest`
- Merge `SqlSegmentsMetadataManagerEmptyTest` into this test
- Add method `testPollEmpty`
- Shave a few seconds off of the tests by reducing poll duration
- Simplify creation of test segments
- Some renames here and there
- Remove unused methods
- Move `TestDerbyConnector.allowLastUsedFlagToBeNull` to this class
Other minor changes
- Add javadoc to `NoneShardSpec`
- Use lambda in `SqlSegmentMetadataPublisher`
While converting Sequence<ScanResultValue> to Sequence<Frames>, when maxSubqueryBytes is enabled, we batch the results to prevent creating a single frame per ScanResultValue. Batching requires peeking into the actual value, and checking if the row signature of the scan result’s value matches that of the previous value.
Since we can do this indefinitely (in the worst case all of them have the same signature), we keep fetching them and accumulating them in a list (on the heap). We don’t really know how much to batch before we actually write the value as frames.
The PR modifies the batching logic to not accumulate the results in an intermediary list
* `Expr#singleThreaded` which creates a singleThreaded version of the actual expression (caching ExprEval is allowed)
* `Expr#makeSingleThreaded` to make a whole subtree of expressions 'singleThreaded' - uses `Shuttle` to create the new expression tree
* `ConstantExpr#singleThreaded` creates a specialized `ConstantExpr` which does cache the `ExprEval`
* some `@Immutable` annotations were added to make it more likely to notice that there might be something off if a similar change will be made around here for some reason
Since #15175, the javadoc for ReadableFieldPointer is somewhat out of date. It says that
the pointer only points to the beginning of the field, but this is no longer true. This
patch updates the javadoc to be more accurate.
allow a hashjoin result to be converted to RowsAndColumns
added StorageAdapterRowsAndColumns
fix incorrect isConcrete() return values during early phase of planning
* Move retries into DataSegmentPusher implementations.
The individual implementations know better when they should and should
not retry. They can also generate better error messages.
The inspiration for this patch was a situation where EntityTooLarge was
generated by the S3DataSegmentPusher, and retried uselessly by the
retry harness in PartialSegmentMergeTask.
* Fix missing var.
* Adjust imports.
* Tests, comments, style.
* Remove unused import.
* Rows.objectToNumber: Accept decimals with output type LONG.
PR #15615 added an optimization to avoid parsing numbers twice in cases
where we know that they should definitely be longs or
definitely be doubles. Rather than try parsing as long first, and then
try parsing as double, it would use only the parsing routine specific to
the requested outputType.
This caused a bug: previously, we would accept decimals like "1.0" or
"1.23" as longs, by truncating them to "1". After that patch, we would
treat such decimals as nulls when the outputType is set to LONG.
This patch retains the short-circuit for doubles: if outputType is
DOUBLE, we only parse the string as a double. But for outputType LONG,
this patch restores the old behavior: try to parse as long first,
then double.
* cooler cursor filter processing allowing much smart utilization of indexes by feeding selectivity forward, with implementations for range and predicate based filters
* added new method Filter.makeFilterBundle which cursors use to get indexes and matchers for building offsets
* AND filter partitioning is now pushed all the way down, even to nested AND filters
* vector engine now uses same indexed base value matcher strategy for OR filters which partially support indexes
The code in the groupBy engine and the topN engine assume that the dimensions are comparable and can call dimA.compareTo(dimB) to sort the dimensions and group them together.
This works well for the primitive dimensions, because they are Comparable, however falls apart when the dimensions can be arrays (or in future scenarios complex columns). In cases when the dimensions are not comparable, Druid resorts to having a wrapper type ComparableStringArray and ComparableList, which is a Comparable, based on the list comparator.
Fixes a bug when the undocumented castToType parameter is set on 'auto' column schema, which should have been using the 'nullable' comparator to allow null values to be present when merging columns, but wasn't which would lead to null pointer exceptions. Also fixes an issue I noticed while adding tests that if 'FLOAT' type was specified for the castToType parameter it would be an exception because that type is not expected to be present, since 'auto' uses the native expressions to determine the input types and expressions don't have direct support for floats, only doubles.
In the future I should probably split this functionality out of the 'auto' schema (maybe even have a simpler version of the auto indexer dedicated to handling non-nested data) but still have the same results of writing out the newer 'nested common format' columns used by 'auto', but I haven't taken that on in this PR.
* Globally disable AUTO_CLOSE_JSON_CONTENT.
This JsonGenerator feature is on by default. It causes problems with code
like this:
try (JsonGenerator jg = ...) {
jg.writeStartArray();
for (x : xs) {
jg.writeObject(x);
}
jg.writeEndArray();
}
If a jg.writeObject call fails due to some problem with the data it's
reading, the JsonGenerator will write the end array marker automatically
when closed as part of the try-with-resources. If the generator is writing
to a stream where the reader does not have some other mechanism to realize
that an exception was thrown, this leads the reader to believe that the
array is complete when it actually isn't.
Prior to this patch, we disabled AUTO_CLOSE_JSON_CONTENT for JSON-wrapped
SQL result formats in #11685, which fixed an issue where such results
could be erroneously interpreted as complete. This patch fixes a similar
issue with task reports, and all similar issues that may exist elsewhere,
by disabling the feature globally.
* Update test.
* Rework ExprMacro base classes to simplify implementations.
This patch removes BaseScalarUnivariateMacroFunctionExpr, adds
BaseMacroFunctionExpr at the top of the hierarchy (a suitable base class
for ExprMacros that take either arrays or scalars), and adds an
implementation for "visit" to BaseMacroFunctionExpr.
The effect on implementations is generally cleaner code:
- Exprs no longer need to implement "visit".
- Exprs no longer need to implement "stringify", even if they don't
use all of their args at runtime, because BaseMacroFunctionExpr has
access to even unused args.
- Exprs that accept arrays can extend BaseMacroFunctionExpr and
inherit a bunch of useful methods. The only one they need to
implement themselves that scalar exprs don't is "supplyAnalyzeInputs".
* Make StringDecodeBase64UTFExpression a static class.
* Remove unused import.
* Formatting, annotation changes.
Executing single value correlated queries will throw an exception today since single_value function is not available in druid.
With these added classes, this provides druid, the capability to plan and run such queries.
During ingestion, incremental segments are created in memory for the different time chunks and persisted to disk when certain thresholds are reached (max number of rows, max memory, incremental persist period etc). In the case where there are a lot of dimension and metrics (1000+) it was observed that the creation/serialization of incremental segment file format for persistence and persisting the file took a while and it was blocking ingestion of new data. This affected the real-time ingestion. This serialization and persistence can be parallelized across the different time chunks. This update aims to do that.
The patch adds a simple configuration parameter to the ingestion tuning configuration to specify number of persistence threads. The default value is 1 if it not specified which makes it the same as it is today.
This PR wires up ValueIndexes and ArrayElementIndexes for nested arrays, ValueIndexes for nested long and double columns, and fixes a handful of bugs I found after adding nested columns to the filter test gauntlet.
introduce checks to ensure that window frame is supported
added check to ensure that no expressions are set as bounds
added logic to detect following/following like cases - described in Window function fails to demarcate if 2 following are used #15739
currently RANGE frames are only supported correctly if both endpoints are unbounded or current row Offset based window range support #15767
added windowingStrictValidation context key to provide a way to override the check
Adds a set of benchmark queries for measuring the planning time with the IN operator. Current results indicate that with the recent optimizations, the IN planning time with 100K expressions in the IN clause is just 3s and with 1M is 46s. For IN clause paired with OR <col>=<val> expr, the numbers are 10s and 155s for 100K and 1M, resp.
Nested columns maintain a null value bitmap for which rows are nulls, however I forgot to wire up a ColumnIndexSupplier to nested columns when filtering the 'raw' data itself, so these were not able to be used. This PR fixes that by adding a supplier that can return NullValueIndex to be used by the NullFilter, which should speed up is null and is not null filters on json columns.
I haven't spent the time to measure the difference yet, but I imagine it should be a significant speed increase.
Note that I only wired this up if druid.generic.useDefaultValueForNull=false (sql compatible mode), the reason being that the SQL planner still uses selector filter, which is unable to properly handle any arrays or complex types (including json, even checking for nulls). The reason for this is so that the behavior is consistent between using the index and using the value matcher, otherwise we get into a situation where using the index has correct behavior but using the value matcher does not, which I was trying to avoid.
* Possibly stabilize intellij-inspections
* remove `integration-tests-ex/cases` from excluded projects from initial build
* enable ErrorProne's `CheckedExceptionNotThrown` to get earlier errors than intellij-inspections
* fix ddsketch pom.xml
* fix spellcheck
* New: Add DDSketch-Druid extension
- Based off of http://www.vldb.org/pvldb/vol12/p2195-masson.pdf and uses
the corresponding https://github.com/DataDog/sketches-java library
- contains tests for post building and using aggregation/post
aggregation.
- New aggregator: `ddSketch`
- New post aggregators: `quantileFromDDSketch` and
`quantilesFromDDSketch`
* Fixing easy CodeQL warnings/errors
* Fixing docs, and dependencies
Also moved aggregator ids to AggregatorUtil and PostAggregatorIds
* Adding more Docs and better null/empty handling for aggregators
* Fixing docs, and pom version
* DDSketch documentation format and wording
A low value of inSubQueryThreshold can cause queries with IN filter to plan as joins more commonly. However, some of these join queries may not get planned as IN filter on data nodes and causes significant perf regression.
### Description
Our Kinesis consumer works by using the [GetRecords API](https://docs.aws.amazon.com/kinesis/latest/APIReference/API_GetRecords.html) in some number of `fetchThreads`, each fetching some number of records (`recordsPerFetch`) and each inserting into a shared buffer that can hold a `recordBufferSize` number of records. The logic is described in our documentation at: https://druid.apache.org/docs/27.0.0/development/extensions-core/kinesis-ingestion/#determine-fetch-settings
There is a problem with the logic that this pr fixes: the memory limits rely on a hard-coded “estimated record size” that is `10 KB` if `deaggregate: false` and `1 MB` if `deaggregate: true`. There have been cases where a supervisor had `deaggregate: true` set even though it wasn’t needed, leading to under-utilization of memory and poor ingestion performance.
Users don’t always know if their records are aggregated or not. Also, even if they could figure it out, it’s better to not have to. So we’d like to eliminate the `deaggregate` parameter, which means we need to do memory management more adaptively based on the actual record sizes.
We take advantage of the fact that GetRecords doesn’t return more than 10MB (https://docs.aws.amazon.com/streams/latest/dev/service-sizes-and-limits.html ):
This pr:
eliminates `recordsPerFetch`, always use the max limit of 10000 records (the default limit if not set)
eliminate `deaggregate`, always have it true
cap `fetchThreads` to ensure that if each fetch returns the max (`10MB`) then we don't exceed our budget (`100MB` or `5% of heap`). In practice this means `fetchThreads` will never be more than `10`. Tasks usually don't have that many processors available to them anyway, so in practice I don't think this will change the number of threads for too many deployments
add `recordBufferSizeBytes` as a bytes-based limit rather than records-based limit for the shared queue. We do know the byte size of kinesis records by at this point. Default should be `100MB` or `10% of heap`, whichever is smaller.
add `maxBytesPerPoll` as a bytes-based limit for how much data we poll from shared buffer at a time. Default is `1000000` bytes.
deprecate `recordBufferSize`, use `recordBufferSizeBytes` instead. Warning is logged if `recordBufferSize` is specified
deprecate `maxRecordsPerPoll`, use `maxBytesPerPoll` instead. Warning is logged if maxRecordsPerPoll` is specified
Fixed issue that when the record buffer is full, the fetchRecords logic throws away the rest of the GetRecords result after `recordBufferOfferTimeout` and starts a new shard iterator. This seems excessively churny. Instead, wait an unbounded amount of time for queue to stop being full. If the queue remains full, we’ll end up right back waiting for it after the restarted fetch.
There was also a call to `newQ::offer` without check in `filterBufferAndResetBackgroundFetch`, which seemed like it could cause data loss. Now checking return value here, and failing if false.
### Release Note
Kinesis ingestion memory tuning config has been greatly simplified, and a more adaptive approach is now taken for the configuration. Here is a summary of the changes made:
eliminates `recordsPerFetch`, always use the max limit of 10000 records (the default limit if not set)
eliminate `deaggregate`, always have it true
cap `fetchThreads` to ensure that if each fetch returns the max (`10MB`) then we don't exceed our budget (`100MB` or `5% of heap`). In practice this means `fetchThreads` will never be more than `10`. Tasks usually don't have that many processors available to them anyway, so in practice I don't think this will change the number of threads for too many deployments
add `recordBufferSizeBytes` as a bytes-based limit rather than records-based limit for the shared queue. We do know the byte size of kinesis records by at this point. Default should be `100MB` or `10% of heap`, whichever is smaller.
add `maxBytesPerPoll` as a bytes-based limit for how much data we poll from shared buffer at a time. Default is `1000000` bytes.
deprecate `recordBufferSize`, use `recordBufferSizeBytes` instead. Warning is logged if `recordBufferSize` is specified
deprecate `maxRecordsPerPoll`, use `maxBytesPerPoll` instead. Warning is logged if maxRecordsPerPoll` is specified
* IncrementalIndex#add is no longer thread-safe.
Following #14866, there is no longer a reason for IncrementalIndex#add
to be thread-safe.
It turns out it already was not using its selectors in a thread-safe way,
as exposed by #15615 making `testMultithreadAddFactsUsingExpressionAndJavaScript`
in `IncrementalIndexIngestionTest` flaky. Note that this problem isn't
new: Strings have been stored in the dimension selectors for some time,
but we didn't have a test that checked for that case; we only have
this test that checks for concurrent adds involving numeric selectors.
At any rate, this patch changes OnheapIncrementalIndex to no longer try
to offer a thread-safe "add" method. It also improves performance a bit
by adding a row ID supplier to the selectors it uses to read InputRows,
meaning that it can get the benefit of caching values inside the selectors.
This patch also:
1) Adds synchronization to HyperUniquesAggregator and CardinalityAggregator,
which the similar datasketches versions already have. This is done to
help them adhere to the contract of Aggregator: concurrent calls to
"aggregate" and "get" must be thread-safe.
2) Updates OnHeapIncrementalIndexBenchmark to use JMH and moves it to the
druid-benchmarks module.
* Spelling.
* Changes from static analysis.
* Fix javadoc.
* Clear "lineSplittable" for JSON when using KafkaInputFormat.
JsonInputFormat has a "withLineSplittable" method that can be used to
control whether JSON is read line-by-line, or as a whole. The intent
is that in streaming ingestion, "lineSplittable" is false (although it
can be overridden by "assumeNewlineDelimited"), and in batch ingestion,
lineSplittable is true.
When a "json" format is wrapped by a "kafka" format, this isn't set
properly. This patch updates KafkaInputFormat to set this on an
underlying "json" format.
The tests for KafkaInputFormat were overriding the "lineSplittable"
parameter explicitly, which wasn't really fair, because that made them
unrealistic to what happens in production. Now they omit the parameter
and get the production behavior.
* Add test.
* Fix test coverage.
* Faster parsing: reduce String usage, list-based input rows.
Three changes:
1) Reworked FastLineIterator to optionally avoid generating Strings
entirely, and reduce copying somewhat. Benefits the line-oriented
JSON, CSV, delimited (TSV), and regex formats.
2) In the delimited (TSV) format, when the delimiter is a single byte,
split on UTF-8 bytes directly.
3) In CSV and delimited (TSV) formats, use list-based input rows when
the column list is provided upfront by the user.
* Fix style.
* Fix inspections.
* Restore validation.
* Remove fastutil-extra.
* Exception type.
* Fixes for error messages.
* Fixes for null handling.
This PR fixes the summary iterator to add aggregators in the correct position. The summary iterator is used when dims are not present, therefore the new change is identical to the old one, but seems more correct while reading.
* support groups windowing mode; which is a close relative of ranges (but not in the standard)
* all windows with range expressions will be executed wit it groups
* it will be 100% correct in case for both bounds its true that: isCurrentRow() || isUnBounded()
* this covers OVER ( ORDER BY COL )
* for other cases it will have some chances of getting correct results...
* Cache value selectors in RowBasedColumnSelectorFactory.
There was already caching for dimension selectors. This patch adds caching
for value (object and number) selectors. It's helpful when the same field is
read multiple times during processing of a single row (for example, by being
an input to both MIN and MAX aggregations).
* Fix typing.
* Fix logic.
* Add SpectatorHistogram extension
* Clarify documentation
Cleanup comments
* Use ColumnValueSelector directly
so that we support being queried as a Number using longSum or doubleSum aggregators as well as a histogram.
When queried as a Number, we're returning the count of entries in the histogram.
* Apply suggestions from code review
Co-authored-by: Victoria Lim <vtlim@users.noreply.github.com>
* Fix references
* Fix spelling
* Update docs/development/extensions-contrib/spectator-histogram.md
Co-authored-by: Victoria Lim <vtlim@users.noreply.github.com>
---------
Co-authored-by: Victoria Lim <vtlim@users.noreply.github.com>
* Add ImmutableLookupMap for static lookups.
This patch adds a new ImmutableLookupMap, which comes with an
ImmutableLookupExtractor. It uses a fastutil open hashmap plus two
lists to store its data in such a way that forward and reverse
lookups can both be done quickly. I also observed footprint to be
somewhat smaller than Java HashMap + MapLookupExtractor for a 1 million
row lookup.
The main advantage, though, is that reverse lookups can be done much
more quickly than MapLookupExtractor (which iterates the entire map
for each call to unapplyAll). This speeds up the recently added
ReverseLookupRule (#15626) during SQL planning with very large lookups.
* Use in one more test.
* Fix benchmark.
* Object2ObjectOpenHashMap
* Fixes, and LookupExtractor interface update to have asMap.
* Remove commented-out code.
* Fix style.
* Fix import order.
* Add fastutil.
* Avoid storing Map entries.
* Reverse, pull up lookups in the SQL planner.
Adds two new rules:
1) ReverseLookupRule, which eliminates calls to LOOKUP by doing
reverse lookups.
2) AggregatePullUpLookupRule, which pulls up calls to LOOKUP above
GROUP BY, when the lookup is injective.
Adds configs `sqlReverseLookup` and `sqlPullUpLookup` to control whether
these rules fire. Both are enabled by default.
To minimize the chance of performance problems due to many keys mapping to
the same value, ReverseLookupRule refrains from reversing a lookup if there
are more keys than `inSubQueryThreshold`. The rationale for using this setting
is that reversal works by generating an IN, and the `inSubQueryThreshold`
describes the largest IN the user wants the planner to create.
* Add additional line.
* Style.
* Remove commented-out lines.
* Fix tests.
* Add test.
* Fix doc link.
* Fix docs.
* Add one more test.
* Fix tests.
* Logic, test updates.
* - Make FilterDecomposeConcatRule more flexible.
- Make CalciteRulesManager apply reduction rules til fixpoint.
* Additional tests, simplify code.
* Faster k-way merging using tournament trees, 8-byte key strides.
Two speedups for FrameChannelMerger (which does k-way merging in MSQ):
1) Replace the priority queue with a tournament tree, which does fewer
comparisons.
2) Compare keys using 8-byte strides, rather than 1 byte at a time.
* Adjust comments.
* Fix style.
* Adjust benchmark and test.
* Add eight-list test (power of two).
This PR fixes a bug with the long string pair serde where null and empty strings are treated equivalently, and the return value is always null. When 'useDefaultValueForNull' was set to true by default, this wasn't a commonly seen issue, because nulls were equivalent to empty strings. However, since the default has changed to false, this can create incorrect results when the long string pairs are serded, where the empty strings are incorrectly converted to nulls.
changes:
* ColumnIndexSelector now extends ColumnSelector. The only real implementation of ColumnIndexSelector, ColumnSelectorColumnIndexSelector, already has a ColumnSelector, so this isn't very disruptive
* removed getColumnNames from ColumnSelector since it was not used
* VirtualColumns and VirtualColumn getIndexSupplier method now needs argument of ColumnIndexSelector instead of ColumnSelector, which allows expression virtual columns to correctly recognize other virtual columns, fixing an issue which would incorrectly handle other virtual columns as non-existent columns instead
* fixed a bug with sql planner incorrectly not using expression filter for equality filters on columns with extractionFn and no virtual column registry
* overhaul DruidPredicateFactory to better handle 3VL
fixes some bugs caused by some limitations of the original design of how DruidPredicateFactory interacts with 3-value logic. The primary impacted area was with how filters on values transformed with expressions or extractionFn which turn non-null values into nulls, which were not possible to be modelled with the 'isNullInputUnknown' method
changes:
* adds DruidObjectPredicate to specialize string, array, and object based predicates instead of using guava Predicate
* DruidPredicateFactory now uses DruidObjectPredicate
* introduces DruidPredicateMatch enum, which all predicates returned from DruidPredicateFactory now use instead of booleans to indicate match. This means DruidLongPredicate, DruidFloatPredicate, DruidDoublePredicate, and the newly added DruidObjectPredicate apply methods all now return DruidPredicateMatch. This allows matchers and indexes
* isNullInputUnknown has been removed from DruidPredicateFactory
* rename, fix test
* adjust
* style
* npe
* more test
* fix default value mode to not match new test
* Reverse lookup fixes and enhancements.
1) Add a "mayIncludeUnknown" parameter to DimFilter#optimize. This is important
because otherwise the reverse-lookup optimization is done improperly when
the "in" filter appears under a "not", and the lookup extractionFn may return
null for some possible values of the filtered column. The "includeUnknown" test
cases in InDimFilterTest illustrate the difference in behavior.
2) Enhance InDimFilter#optimizeLookup to handle "mayIncludeUnknown", and to be able
to do a reverse lookup in a wider variety of cases.
3) Make "unapply" protected in LookupExtractor, and move callers to "unapplyAll".
The main reason is that MapLookupExtractor, a common implementation, lacks a
reverse mapping and therefore does a scan of the map for each call to "unapply".
For performance sake these calls need to be batched.
* Remove optimize call from BloomDimFilter.
* Follow the law.
* Fix tests.
* Fix imports.
* Switch function.
* Fix tests.
* More tests.
* New handling for COALESCE, SEARCH, and filter optimization.
COALESCE is converted by Calcite's parser to CASE, which is largely
counterproductive for us, because it ends up duplicating expressions.
In the current code we end up un-doing it in our CaseOperatorConversion.
This patch has a different approach:
1) Add CaseToCoalesceRule to convert CASE back to COALESCE earlier, before
the Volcano planner runs, using CaseToCoalesceRule.
2) Add FilterDecomposeCoalesceRule to decompose calls like
"f(COALESCE(x, y))" into "(x IS NOT NULL AND f(x)) OR (x IS NULL AND f(y))".
This helps use indexes when available on x and y.
3) Add CoalesceLookupRule to push COALESCE into the third arg of LOOKUP.
4) Add a native "coalesce" function so we can convert 3+ arg COALESCE.
The advantage of this approach is that by un-doing the CASE to COALESCE
conversion earlier, we have flexibility to do more stuff with
COALESCE (like decomposition and pushing into LOOKUP).
SEARCH is an operator used internally by Calcite to represent matching
an argument against some set of ranges. This patch improves our handling
of SEARCH in two ways:
1) Expand NOT points (point "holes" in the range set) from SEARCH as
`!(a || b)` rather than `!a && !b`, which makes it possible to convert
them to a "not" of "in" filter later.
2) Generate those nice conversions for NOT points even if the SEARCH
is not composed of 100% NOT points. Without this change, a SEARCH
for "x NOT IN ('a', 'b') AND x < 'm'" would get converted like
"x < 'a' OR (x > 'a' AND x < 'b') OR (x > 'b' AND x < 'm')".
One of the steps we take when generating Druid queries from Calcite
plans is to optimize native filters. This patch improves this step:
1) Extract common ANDed predicates in ConvertSelectorsToIns, so we can
convert "(a && x = 'b') || (a && x = 'c')" into "a && x IN ('b', 'c')".
2) Speed up CombineAndSimplifyBounds and ConvertSelectorsToIns on
ORs with lots of children by adjusting the logic to avoid calling
"indexOf" and "remove" on an ArrayList.
3) Refactor ConvertSelectorsToIns to reduce duplicated code between the
handling for "selector" and "equals" filters.
* Not so final.
* Fixes.
* Fix test.
* Fix test.
* Fix ColumnSelectorColumnIndexSelector#getColumnCapabilities.
It was using virtualColumns.getColumnCapabilities, which only returns
capabilities for virtual columns, not regular columns. The effect of this
is that expression filters (and in some cases, arrayContainsElement filters)
would build value matchers rather than use indexes.
I think this has been like this since #12315, which added the
getColumnCapabilities method to BitmapIndexSelector, and included the same
implementation as exists in the code today.
This error is easy to make due to the design of virtualColumns.getColumnCapabilities,
so to help avoid it in the future, this patch renames the method to
getColumnCapabilitiesWithoutFallback to emphasize that it does not return
capabilities for regular columns.
* Make getColumnCapabilitiesWithoutFallback package-private.
* Fix expression filter bitmap usage.
The PR: #13947 introduced a function evalDimension() in the interface RowFunction.
There was no default implementation added for this interface which causes all the implementations and custom transforms to fail and require to implement their own version of evalDimension method. This PR adds a default implementation in the interface which allows the evalDimension to return value as a Singleton array of eval result.
Fixes#15072
Before this modification , the third parameter (timezone) require to be a Literal, it will throw a error when this parameter is column Identifier.
Changes
- Add `log` implementation for `AuditManager` alongwith `SQLAuditManager`
- `LoggingAuditManager` simply logs the audit event. Thus, it returns empty for
all `fetchAuditHistory` calls.
- Add new config `druid.audit.manager.type` which can take values `log`, `sql` (default)
- Add new config `druid.audit.manager.logLevel` which can take values `DEBUG`, `INFO`, `WARN`.
This gets activated only if `type` is `log`.
- Remove usage of `ConfigSerde` from `AuditManager` as audit is not just limited to configs
- Add `AuditSerdeHelper` for a single implementation of serialization/deserialization of
audit payload and other utility methods.
* Allow for kafka emitter producer secrets to be masked in logs instead of being visible
This change will allow for kafka producer config values that should be secrets to not show up in the logs.
This will enhance the security of the people who use the kafka emitter to use this if they want to.
This is opt in and will not affect prior configs for this emitter
* fix checkstyle issue
* change property name
I was looking into a query which was performing a bit poorly because the case_searched was touching more than 1 columns (if there is only 1 column there is a cache based evaluator).
While I was doing that I've noticed that there are a few simple things which could help a bit:
use a static TRUE/FALSE instead of creating a new object every time
create the ExprEval early for ConstantExpr -s (except the one for BigInteger which seem to have some odd contract)
return early from type autodetection
these changes mostly reduce the amount of garbage the query creates during case_searched evaluation; although ExpressionSelectorBenchmark shows some improvements ~15% - but my manual trials on the taxi dataset with 60M rows showed more improvements - probably due to the fact that these changes mostly only reduce gc pressure.
* Add initial draft of MarkDanglingTombstonesAsUnused duty.
* Use overshadowed segments instead of all used segments.
* Add unit test for MarkDanglingSegmentsAsUnused duty.
* Add mock call
* Simplify code.
* Docs
* shorter lines formatting
* metric doc
* More tests, refactor and fix up some logic.
* update javadocs; other review comments.
* Make numCorePartitions as 0 in the TombstoneShardSpec.
* fix up test
* Add tombstone core partition tests
* Update docs/design/coordinator.md
Co-authored-by: 317brian <53799971+317brian@users.noreply.github.com>
* review comment
* Minor cleanup
* Only consider tombstones with 0 core partitions
* Need to register the test shard type to make jackson happy
* test comments
* checkstyle
* fixup misc typos in comments
* Update logic to use overshadowed segments
* minor cleanup
* Rename duty to eternity tombstone instead of dangling. Add test for full eternity tombstone.
* Address review feedback.
---------
Co-authored-by: 317brian <53799971+317brian@users.noreply.github.com>
Query with lookups in FilteredAggregator fails with this exception in router,
Cannot construct instance of `org.apache.druid.query.aggregation.FilteredAggregatorFactory`, problem: Lookup [campaigns_lookup[campaignId][is_sold][autodsp]] not found at [Source: (org.eclipse.jetty.server.HttpInputOverHTTP); line: 1, column: 913] (through reference chain: org.apache.druid.query.groupby.GroupByQuery["aggregations"]->java.util.ArrayList[1])
T
he problem is that constructor of FilteredAggregatorFactory is actually validating if the lookup exists in this statement dimFilter.toFilter().
This is failing on the router, which is to be expected, because, the router isn’t assigned any lookups.
The fix is to move to a lazy initialisation of the filter object in the constructor.
It wasn't checking the column name, so it would return a domain regardless
of the input column. This means that null filters on data sources with range
partitioning would lead to excessive pruning of segments, and therefore
missing results.
I think this is a problem as it discards the false return value when the putToKeyBuffer can't store the value because of the limit
Not forwarding the return value at that point may lead to the normal continuation here regardless something was not added to the dictionary like here
* Make numCorePartitions as 0 in the TombstoneShardSpec.
* fix up test
* Add tombstone core partition tests
* review comment
* Need to register the test shard type to make jackson happy
Fixed the following flaky tests:
org.apache.druid.math.expr.ParserTest#testApplyFunctions
org.apache.druid.math.expr.ParserTest#testSimpleMultiplicativeOp1
org.apache.druid.math.expr.ParserTest#testFunctions
org.apache.druid.math.expr.ParserTest#testSimpleLogicalOps1
org.apache.druid.math.expr.ParserTest#testSimpleAdditivityOp1
org.apache.druid.math.expr.ParserTest#testSimpleAdditivityOp2
The above mentioned tests have been reported as flaky (tests assuming deterministic implementation of a non-deterministic specification ) when ran against the NonDex tool.
The tests contain assertions (Assertion 1 & Assertion 2) that compare an ArrayList created from a HashSet using the ArrayList() constructor with another List. However, HashSet does not guarantee the ordering of elements and thus resulting in these flaky tests that assume deterministic implementation of HashSet. Thus, when the NonDex tool shuffles the HashSet elements, it results in the test failures:
Co-authored-by: ythorat2 <ythorat2@illinois.edu>
* MSQ generates tombstones honoring the query's granularity.
This change tweaks to only account for the infinite-interval tombstones.
For finite-interval tombstones, the MSQ query granualrity will be used
which is consistent with how MSQ works.
* more tests and some cleanup.
* checkstyle
* comment edits
* Throw TooManyBuckets fault based on review; add more tests.
* Add javadocs for both methods on reconciling the methods.
* review: Move testReplaceTombstonesWithTooManyBucketsThrowsException to MsqFaultsTest
* remove unused imports.
* Move TooManyBucketsException to indexing package for shared exception handling.
* lower max bucket for tests and fixup count
* Advance and count the iterator.
* checkstyle
In the current design, brokers query both data nodes and tasks to fetch the schema of the segments they serve. The table schema is then constructed by combining the schemas of all segments within a datasource. However, this approach leads to a high number of segment metadata queries during broker startup, resulting in slow startup times and various issues outlined in the design proposal.
To address these challenges, we propose centralizing the table schema management process within the coordinator. This change is the first step in that direction. In the new arrangement, the coordinator will take on the responsibility of querying both data nodes and tasks to fetch segment schema and subsequently building the table schema. Brokers will now simply query the Coordinator to fetch table schema. Importantly, brokers will still retain the capability to build table schemas if the need arises, ensuring both flexibility and resilience.
* Use filters for pruning properly for hash-joins.
Native used them too aggressively: it might use filters for the RHS
to prune the LHS. MSQ used them not at all. Now, both use them properly,
pruning based on base (LHS) columns only.
* Fix tests.
* Fix style.
* Clear filterFields too.
* Update.
* Add system fields to input sources.
Main changes:
1) The SystemField enum defines system fields "__file_uri", "__file_path",
and "__file_bucket". They are associated with each input entity.
2) The SystemFieldInputSource interface can be added to any InputSource
to make it system-field-capable. It sets up serialization of a list
of configured "systemFields" in the JSON form of the input source, and
provides a method getSystemFieldValue for computing the value of each
system field. Cloud object, HDFS, HTTP, and Local now have this.
* Fix various LocalInputSource calls.
* Fix style stuff.
* Fixups.
* Fix tests and coverage.
* better documentation for the differences between arrays and mvds
* add outputType to ExpressionPostAggregator to make docs true
* add output coercion if outputType is defined on ExpressionPostAgg
* updated post-aggregations.md to be consistent with aggregations.md and filters.md and use tables
* Frames: consider writing singly-valued column when input column hasMultipleValues is UNKNOWN.
Prior to this patch, columnar frames would always write multi-valued columns if
the input column had hasMultipleValues = UNKNOWN. This had the effect of flipping
UNKNOWN to TRUE when copying data into frames, which is problematic because TRUE
causes expressions to assume that string inputs must be treated as arrays.
We now avoid this by flipping UNKNOWN to FALSE if no multi-valuedness
is encountered, and flipping it to TRUE if multi-valuedness is encountered.
* Add regression test case.
Currently advance function in postJoinCursor calls advanceUninterruptibly which in turn keeps calling baseCursor.advanceUninterruptibly until the post join condition matches, without checking for interrupts. This causes the CPU to hit 100% without getting a chance for query to be cancelled.
With this change, the call flow of advance and advanceUninterruptibly is separated out so that they call baseCursor.advance and baseCursor.advanceUninterruptibly in them, respectively, giving a chance for interrupts in the former case between successive calls to baseCursor.advance.
* Fix error assuming a Complex Type that is a Number is a double
In the case where a complex type is a number, it may not be castable to double. It can safely be case as Number first to get to the doubleValue.
- adds a new query build path: DruidQuery#toScanAndSortQuery which:
- builds a ScanQuery without considering the current ordering
- builds an operator to execute the sort
- fixes a null string to "null" literal string conversion in the frame serializer code
- fixes some DrillWindowQueryTest cases
- fix NPE in NaiveSortOperator in case there was no input
- enables back CoreRules.AGGREGATE_REMOVE
- adds a processing level OffsetLimit class and uses that instead of just the limit in the rac parts
- earlier window expressions on top of a subquery with an offset may have ignored the offset
* provide function name when unknown exceptions are encountered
* fix keywords/etc
* fix keywrod order - regex excercise
* add test
* add check&fix keywords
* decoupledIgnore
* Revert "decoupledIgnore"
This reverts commit e922c820a7.
* unpatch Function
* move to a different location
* checkstyle
for some exotic queries like:
SELECT
'_'||dim1,
MIN(cast(0 as double)) OVER (),
MIN(cast((cnt||cnt) as bigint)) OVER ()
FROM foo
the compilation have resulted in NPE -s mostly because VirtualColumn -s were not handled properly
* add native filters for "(filter) is true" and "(filter) is false"
changes:
* add IsTrueDimFilter, IsFalseDimFilter, and abstract IsBooleanDimFilter for native json filter implementations of `(filter) IS TRUE` and `(filter) IS FALSE`
* add IsBooleanFilter for actual filtering logic for these filters, which ignore includeUnknown to always use matches with false for true and !matches with true for false
* fix test incorrectly adjusted to wrong answer in #15058
* add tests for default value mode
* sql compatible tri-state native logical filters when druid.expressions.useStrictBooleans=true and druid.generic.useDefaultValueForNull=false, and new druid.generic.useThreeValueLogicForNativeFilters=true
* log.warn if non-default configurations are used to guide operators towards SQL complaint behavior
* fixes
* check for latest rewrite place
* Revert "check for latest rewrite place"
This reverts commit 5cf1e2c1ca.
* some stuff
(cherry picked from commit ab346d4373ea888eb8ef6115e018e7fb0d27407f)
* update test output
* updates to test ouptuts
* some stuff
* move validator
* cleanup
* fix
* change test slightly
* add apidoc cleanup warnings
* cleanup/etc
* instead of telling the story; add a fail with some reason whats the issue
* lead-lag fix
* add test
* remove unnecessary throw
* druidexception-trial
* Revert "druidexception-trial"
This reverts commit 8fa06644bc.
* undo changes to no_grouping; add no_grouping2
* add missing assert on resultcount
* rename method; update
* introduce enum/etc
* make resultmatchmode accessible from TestBuilder#expectedResults
* fix dump results to use log
* fix
* handle null correctly
* disable feature type based things for MSQ
* fix varianssqlaggtest
* use eps in other test
* fix intellij error
* add final
* addrss review
* update test/string/etc
* write concat in 3 lines :D
This patch changes the thread name of the processing pool of the indexers/peons/historicals from query.getType() + "_" + query.getDataSource() + "_" + query.getIntervals() to query.getId()
* add a bunch of tests with array typed columns to CalciteArraysQueryTest
* fix a bug with unnest filter pushdown when filtering on unnested array columns
This PR aims to add the capabilities to:
1. Fetch the realtime segment metadata from the coordinator server view,
2. Adds the ability for workers to query indexers, similar to how brokers do the same for native queries.
* Fix IndexerWorkerClient#fetchChannelData when response has data and error.
When a channel data response from a worker includes some data and then
some I/O error, then when the call is retried, we will re-read the set
of data that was read by the previous connection and add it to the
local channel again. This causes the local channel to become corrupted.
The patch fixes this case by skipping data that has already been read.
* Updating plans when using joins with unnest on the left
* Correcting segment map function for hashJoin
* The changes done here are not reflected into MSQ yet so these tests might not run in MSQ
* native tests
* Self joins with unnest data source
* Making this pass
* Addressing comments by adding explanation and new test
Code relying on monomorphic processing on JDK8 doesn't work correctly, since it tries to reference getArrayLength using method handles, which might have been accidentally removed here since it seems unused. This PR adds the method back as is.
Fixes a bug caused by #14919, which was just using the column name as part of a temp file name, which.. isn't very cool, my bad. Switched to use StringUtils.urlEncode so that ugly chars don't explode stuff. The modified test fails without the changes in this PR.
Row-based frames, and by extension, MSQ now supports numeric array types. This means that all queries consuming or producing arrays would also work with MSQ. Numeric arrays can also be ingested via MSQ. Post this patch, queries like, SELECT [1, 2] would work with MSQ since they consume a numeric array, instead of failing with an unsupported column type exception.
When merging analyses, lenient merging sets unmergeable aggregators
to null. Merging such a null aggregator record into a nonnull record
would potentially lead to NPE in getMergingFactory.
The new code only calls getMergingFactory if both the old and new
aggregators are nonnull; else, if either is null, then the merged
aggregator is also set to null.
This patch introduces "processor managers" to processor factories, as a replacement for the sequence of processors. Processor managers can use the results of earlier processors to influence the creation of later processors, which provides us with the building block we need to ensure that broadcast join data is only read once.
In particular, when broadcast join is happening, the BaseFrameProcessorFactory now uses a ChainedProcessorManager to first run BroadcastJoinSegmentMapFnProcessor (in a single thread), and then run all of the regular processors (possibly multithreaded).
When moving timestamps by an offset using org.joda.time.chrono.ISOChronology library, if the new timestamp falls in Daylight Savings Time (DST) transition period, the library rounds it off to the nearest valid time. This can lead to incorrect final timestamp when calculated using intermediate offsets landing in DST transition, for e.g. +21D arrived at using +14D and +7D offset, where +14D lands in DST transition period. Since bucketStart values are calculated using this library, this behaviour can lead to incorrect bucketStart times.
This change updates dependencies as needed and fixes tests to remove code incompatible with Java 21
As a result all unit tests now pass with Java 21.
* update maven-shade-plugin to 3.5.0 and follow-up to #15042
* explain why we need to override configuration when specifying outputFile
* remove configuration from dependency management in favor of explicit overrides in each module.
* update to mockito to 5.5.0 for Java 21 support when running with Java 11+
* continue using latest mockito 4.x (4.11.0) when running with Java 8
* remove need to mock private fields
* exclude incorrectly declared mockito dependency from pac4j-oidc
* remove mocking of ByteBuffer, since sealed classes can no longer be mocked in Java 21
* add JVM options workaround for system-rules junit plugin not supporting Java 18+
* exclude older versions of byte-buddy from assertj-core
* fix for Java 19 changes in floating point string representation
* fix missing InitializedNullHandlingTest
* update easymock to 5.2.0 for Java 21 compatibility
* update animal-sniffer-plugin to 1.23
* update nl.jqno.equalsverifier to 3.15.1
* update exec-maven-plugin to 3.1.0
This change is meant to fix a issue where passing too large of a task payload to the mm-less task runner will cause the peon to fail to startup because the payload is passed (compressed) as a environment variable (TASK_JSON). In linux systems the limit for a environment variable is commonly 128KB, for windows systems less than this. Setting a env variable longer than this results in a bunch of "Argument list too long" errors.
The aggregators had incorrect types for getResultType when shouldFinalze
is false. They had the finalized type, but they should have had the
intermediate type.
Also includes a refactor of how ExprMacroTable is handled in tests, to make
it easier to add tests for this to the MSQ module. The bug was originally
noticed because the incorrect result types caused MSQ queries with DS_HLL
to behave erratically.
These were added in #14977, but the implementations are incorrect, because they return null when the input arg is null. They should return false when the input is null. Remove them for now, rather than fixing them, since they're so new that they might as well never have existed.
Changes:
- Add task context parameter `taskLockType`. This determines the type of lock used by a batch task.
- Add new task actions for transactional replace and append of segments
- Add methods StorageCoordinator.commitAppendSegments and commitReplaceSegments
- Upgrade segments to appropriate versions when performing replace and append
- Add new metadata table `upgradeSegments` to track segments that need to be upgraded
- Add tests
* Adding new function decode_base64_utf8 and expr macro
* using BaseScalarUnivariateMacroFunctionExpr
* Print stack trace in case of debug in ChainedExecutionQueryRunner
* fix static check
* update RoaringBitmap to 0.9.49
update RoaringBitmap from 0.9.0 to 0.9.49
Many optimizations and improvements have gone into recent releases of
RoaringBitmap. It seems worthwhile to incorporate those.
* implement workaround for BatchIterator interface change
* add test case for BatchIteratorAdapter.advanceIfNeeded
* Add IS [NOT] DISTINCT FROM to SQL and join matchers.
Changes:
1) Add "isdistinctfrom" and "notdistinctfrom" native expressions.
2) Add "IS [NOT] DISTINCT FROM" to SQL. It uses the new native expressions
when generating expressions, and is treated the same as equals and
not-equals when generating native filters on literals.
3) Update join matchers to have an "includeNull" parameter that determines
whether we are operating in "equals" mode or "is not distinct from"
mode.
* Main changes:
- Add ARRAY handling to "notdistinctfrom" and "isdistinctfrom".
- Include null in pushed-down filters when using "notdistinctfrom" in a join.
Other changes:
- Adjust join filter analyzer to more explicitly use InDimFilter's ValuesSets,
relying less on remembering to get it right to avoid copies.
* Remove unused "wrap" method.
* Fixes.
* Remove methods we do not need.
* Fix bug with INPUT_REF.
This is due to the recursive filter creation in unnest storage adapter not performing correctly in case of an empty children. This PR addresses the issue
* Fix for latest agg to handle nulls in time column. Also adding optimization for dictionary encoded string columns
* One minor fix
* Adding more tests for the new class
* Changing the init to a putInt
* Fix for schema mismatch to go down using the non vectorize path till we update the vectorized aggs properly
* Fixing a failed test
* Updating numericNilAgg
* Moving to use default values in case of nil agg
* Adding the same for first agg
* Fixing a test
* fixing vectorized string agg for last/first with cast if numeric
* Updating tests to remove mockito and cover the case of string first/last on non string columns
* Updating a test to vectorize
* Addressing review comments: Name change to NilVectorAggregator and using static variables now
* fixing intellij inspections
Changes:
- Move following configs from `CliCoordinator` to `DruidCoordinatorConfig`:
- `druid.coordinator.kill.on`
- `druid.coordinator.kill.pendingSegments.on`
- `druid.coordinator.kill.supervisors.on`
- `druid.coordinator.kill.rules.on`
- `druid.coordinator.kill.audit.on`
- `druid.coordinator.kill.datasource.on`
- `druid.coordinator.kill.compaction.on`
- In the Coordinator style used by historical management duties, always instantiate all
the metadata cleanup duties but execute only if enabled. In the existing code, they are
instantiated only when enabled by using optional binding with Guice.
- Add a wrapper `MetadataManager` which contains handles to all the different
metadata managers for rules, supervisors, segments, etc.
- Add a `CoordinatorConfigManager` to simplify read and update of coordinator configs
- Remove persistence related methods from `CoordinatorCompactionConfig` and
`CoordinatorDynamicConfig` as these are config classes.
- Remove annotations `@CoordinatorIndexingServiceDuty`,
`@CoordinatorMetadataStoreManagementDuty`
changes:
* add back nested column v4 serializers
* 'json' schema by default still uses the newer 'nested common format' used by 'auto', but now has an optional 'formatVersion' property which can be specified to override format versions on native ingest jobs
* add system config to specify default column format stuff, 'druid.indexing.formats', and property 'druid.indexing.formats.nestedColumnFormatVersion' to specify system level preferred nested column format for friendly rolling upgrades from versions which do not support the newer 'nested common format' used by 'auto'
* update test
* update test
* format
* test
* fix0
* Revert "fix0"
This reverts commit 44992cb393.
* ok resultset
* add plan
* update test
* before rewind
* test
* fix toString/compare/test
* move test
* add timeColumn to hashCode
Changes:
- Add new metric `kill/pendingSegments/count` with dimension `dataSource`
- Add tests for `KillStalePendingSegments`
- Reduce no-op logs that spit out for each datasource even when no pending
segments have been deleted. This can get particularly noisy at low values of `indexingPeriod`.
- Refactor the code in `KillStalePendingSegments` for readability and add javadocs
A new monitor SubqueryCountStatsMonitor which emits the metrics corresponding to the subqueries and their execution is now introduced. Moreover, the user can now also use the auto mode to automatically set the number of bytes available per query for the inlining of its subquery's results.
* Vectorizing earliest for numeric
* Vectorizing earliest string aggregator
* checkstyle fix
* Removing unnecessary exceptions
* Ignoring tests in MSQ as earliest is not supported for numeric there
* Fixing benchmarks
* Updating tests as MSQ does not support earliest for some cases
* Addressing review comments by adding the following:
1. Checking capabilities first before creating selectors
2. Removing mockito in tests for numeric first aggs
3. Removing unnecessary tests
* Addressing issues for dictionary encoded single string columns where we can use the dictionary ids instead of the entire string
* Adding a flag for multi value dimension selector
* Addressing comments
* 1 more change
* Handling review comments part 1
* Handling review comments and correctness fix for latest_by when the time expression need not be in sorted order
* Updating numeric first vector agg
* Revert "Updating numeric first vector agg"
This reverts commit 4291709901.
* Updating code for correctness issues
* fixing an issue with latest agg
* Adding more comments and removing an unnecessary check
* Addressing null checks for tie selector and only vectorize false for quantile sketches
Changes:
- Make ServiceMetricEvent.Builder extend ServiceEventBuilder<ServiceMetricEvent>
and thus convert it to a plain builder rather than a builder of builder.
- Add methods setCreatedTime , setMetricAndValue to the builder
Currently we have an error handler for https connection attempts, but
not for plaintext connection attempts. This leads to warnings like the
following for plaintext connection errors:
EXCEPTION, please implement org.jboss.netty.handler.codec.http.HttpContentDecompressor.exceptionCaught() for proper handling.
This happens because if we don't add our own error handler, the last
handler in the chain during a connection attempt is HttpContentDecompressor,
which doesn't handle errors.
The new error handler for plaintext doesn't do much: it just closes
the channel.
This patch fixes a few issues toward #14858
1. some phony classes were added to enable maven to track the compilation of those classes
2. cyclonedx 2.7.9 seem to handle incremental compilation better; it had a PR relating to that
3. needed to update root pom to 25
4. update antlr to 4.5.3 older one didn't really worked incrementally; 4.5.3 works much better
Currently, Druid is using Guava 16.0.1 version. This upgrade to 31.1-jre fixes the following issues.
CVE-2018-10237 (Unbounded memory allocation in Google Guava 11.0 through 24.x before 24.1.1 allows remote attackers to conduct denial of service attacks against servers that depend on this library and deserialize attacker-provided data because the AtomicDoubleArray class (when serialized with Java serialization) and the CompoundOrdering class (when serialized with GWT serialization) perform eager allocation without appropriate checks on what a client has sent and whether the data size is reasonable). We don't use Java or GWT serializations. Despite being false positive they're causing red security scans on Druid distribution.
Latest version of google-client-api is incompatible with the existing Guava version. This PR unblocks Update google client apis to latest version #14414
Follow up changes to #12599
Changes:
- Rename column `used_flag_last_updated` to `used_status_last_updated`
- Remove new CLI tool `UpdateTables`.
- We already have a `CreateTables` with similar functionality, which should be able to
handle update cases too.
- Any user running the cluster for the first time should either just have `connector.createTables`
enabled or run `CreateTables` which should create tables at the latest version.
- For instance, the `UpdateTables` tool would be inadequate when a new metadata table has
been added to Druid, and users would have to run `CreateTables` anyway.
- Remove `upgrade-prep.md` and include that info in `metadata-init.md`.
- Fix log messages to adhere to Druid style
- Use lambdas
* Add new configurable buffer period to create gap between mark unused and kill of segment
* Changes after testing
* fixes and improvements
* changes after initial self review
* self review changes
* update sql statement that was lacking last_used
* shore up some code in SqlMetadataConnector after self review
* fix derby compatibility and improve testing/docs
* fix checkstyle violations
* Fixes post merge with master
* add some unit tests to improve coverage
* ignore test coverage on new UpdateTools cli tool
* another attempt to ignore UpdateTables in coverage check
* change column name to used_flag_last_updated
* fix a method signature after column name switch
* update docs spelling
* Update spelling dictionary
* Fixing up docs/spelling and integrating altering tasks table with my alteration code
* Update NULL values for used_flag_last_updated in the background
* Remove logic to allow segs with null used_flag_last_updated to be killed regardless of bufferPeriod
* remove unneeded things now that the new column is automatically updated
* Test new background row updater method
* fix broken tests
* fix create table statement
* cleanup DDL formatting
* Revert adding columns to entry table by default
* fix compilation issues after merge with master
* discovered and fixed metastore inserts that were breaking integration tests
* fixup forgotten insert by using pattern of sharing now timestamp across columns
* fix issue introduced by merge
* fixup after merge with master
* add some directions to docs in the case of segment table validation issues
* Update to Calcite 1.35.0
* Update from.ftl for Calcite 1.35.0.
* Fixed tests in Calcite upgrade by doing the following:
1. Added a new rule, CoreRules.PROJECT_FILTER_TRANSPOSE_WHOLE_PROJECT_EXPRESSIONS, to Base rules
2. Refactored the CorrelateUnnestRule
3. Updated CorrelateUnnestRel accordingly
4. Fixed a case with selector filters on the left where Calcite was eliding the virtual column
5. Additional test cases for fixes in 2,3,4
6. Update to StringListAggregator to fail a query if separators are not propagated appropriately
* Refactored for testcases to pass after the upgrade, introduced 2 new data sources for handling filters and select projects
* Added a literalSqlAggregator as the upgraded Calcite involved changes to subquery remove rule. This corrected plans for 2 queries with joins and subqueries by replacing an useless literal dimension with a post agg. Additionally a test with COUNT DISTINCT and FILTER which was failing with Calcite 1.21 is added here which passes with 1.35
* Updated to latest avatica and updated code as SqlUnknownTimeStamp is now used in Calcite which needs to be resolved to a timestamp literal
* Added a wrapper segment ref to use for unnest and filter segment reference
The Azure connector is introduced and MSQ's fault tolerance and durable storage can now be used with Microsoft Azure's blob storage. Also, the results of newly introduced queries from deep storage can now store and fetch the results from Azure's blob storage.
The current version of jackson-databind is flagged for vulnerabilities CVE-2020-28491 (Although cbor format is not used in druid), CVE-2020-36518 (Seems genuine as deeply nested json in can cause resource exhaustion). Updating the dependency to the latest version 2.12.7 to fix these vulnerabilities.
* Minimize PostAggregator computations
Since a change back in 2014, the topN query has been computing
all PostAggregators on all intermediate responses from leaf nodes
to brokers. This generates significant slow downs for queries
with relatively expensive PostAggregators. This change rewrites
the query that is pushed down to only have the minimal set of
PostAggregators such that it is impossible for downstream
processing to do too much work. The final PostAggregators are
applied at the very end.
Fixes a case I missed in #14688 when the return type is STRING but its coming from a top level array typed column instead of a nested array column while making a vector object selector.
Also while here I noticed that the internal JSON_VALUE functions for array types were named inconsistently with the non-array functions, so I renamed them. These are not documented so it should not be disruptive in any way, since they are only used internally for rewrites while planning to make the correctly virtual column.
JSON_VALUE_RETURNING_ARRAY_VARCHAR -> JSON_VALUE_ARRAY_VARCHAR
JSON_VALUE_RETURNING_ARRAY_BIGINT -> JSON_VALUE_ARRAY_BIGINT
JSON_VALUE_RETURNING_ARRAY_DOUBLE -> JSON_VALUE_ARRAY_DOUBLE
The internal non-array functions are JSON_VALUE_VARCHAR, JSON_VALUE_BIGINT, and JSON_VALUE_DOUBLE.
This PR has fixes a bug in the SqlStatementAPI where if the task is not found on the overlord, the response status is 500.
This changes the response to invalid input since the queryID passed is not valid.
* fix issue with nested virtual column array element vector selectors when input is numeric array but output is non-numeric
* add vector value selector for mixed numeric type variant and nested variant fields, tests
* Save a metadata call when reading files from CloudObjectInputSource.
The call to createSplits(inputFormat, null) in formattableReader would
use the default split hint spec, MaxSizeSplitHintSpec, which makes
getObjectMetadata calls in order to compute its splits. This isn't
necessary; we're just trying to unpack the files inside the input
source.
To fix this, use FilePerSplitHintSpec to extract files without any
funny business.
* Adjust call.
* Fix constant.
* Test coverage.
* Frames support for string arrays that are null.
The row format represents null arrays as 0x0001, which older readers
would interpret as an empty array. This provides compatibility with
older readers, which is useful during updates.
The column format represents null arrays by writing -(actual length) - 1
instead of the length, and using FrameColumnWriters.TYPE_STRING_ARRAY for
the type code for string arrays generally. Older readers will report this
as an unrecognized type code. Column format is only used by the operator
query, which is currently experimental, so the impact isn't too severe.
* Remove unused import.
* Return Object[] instead of List from frame array selectors.
Update MSQSelectTest and MSQInsertTest to reflect the fact that null
arrays are possible.
Add a bunch of javadocs to object selectors describing expected behavior,
including the requirement that array selectors return Object[].
* update test case.
* Update test cases.
* fix issues with equality and range filters matching double values to long typed inputs
* adjust to ensure we never homogenize null, [], and [null] into [null] for expressions on real array columns
* allow for batched delete of segments instead of deleting segment data one by one
create new batchdelete method in datasegment killer that has default functionality
of iterating through all segments and calling delete on them. This will enable
a slow rollout of other deepstorage implementations to move to a batched delete
on their own time
* cleanup batchdelete segments
* batch delete with the omni data deleter
cleaned up code
just need to add tests and docs for this functionality
* update java doc to explain how it will try to use batch if function is overwritten
* rename killBatch to kill
add unit tests
* add omniDataSegmentKillerTest for deleting multiple segments at a time. fix checkstyle
* explain test peculiarity better
* clean up batch kill in s3.
* remove unused return value. cleanup comments and fix checkstyle
* default to batch delete. more specific java docs. list segments that couldn't be deleted
if there was a client error or server error
* simplify error handling
* add tests where an exception is thrown when killing multiple s3 segments
* add test for failing to delete two calls with the s3 client
* fix javadoc for kill(List<DataSegment> segments) clean up tests remove feature flag
* fix typo in javadocs
* fix test failure
* fix checkstyle and improve tests
* fix intellij inspections issues
* address comments, make delete multiple segments not assume same bucket
* fix test errors
* better grammar and punctuation. fix test. and better logging for exception
* remove unused code
* avoid extra arraylist instantiation
* fix broken test
* fix broken test
* fix tests to use assert.throws
* Use OverlordClient for all Overlord RPCs.
Continuing the work from #12696, this patch removes HttpIndexingServiceClient
and the IndexingService flavor of DruidLeaderClient completely. All remaining
usages are migrated to OverlordClient.
Supporting changes include:
1) Add a variety of methods to OverlordClient.
2) Update MetadataTaskStorage to skip the complete-task lookup when
the caller requests zero completed tasks. This helps performance of
the "get active tasks" APIs, which don't want to see complete ones.
* Use less forbidden APIs.
* Fixes from CI.
* Add test coverage.
* Two more tests.
* Fix test.
* Updates from CR.
* Remove unthrown exceptions.
* Refactor to improve testability and test coverage.
* Add isNil tests.
* Remove unnecessary "deserialize" methods.
* Add ingest/input/bytes metric and Kafka consumer metrics.
New metrics:
1) ingest/input/bytes. Equivalent to processedBytes in the task reports.
2) kafka/consumer/bytesConsumed: Equivalent to the Kafka consumer
metric "bytes-consumed-total". Only emitted for Kafka tasks.
3) kafka/consumer/recordsConsumed: Equivalent to the Kafka consumer
metric "records-consumed-total". Only emitted for Kafka tasks.
* Fix anchor.
* Fix KafkaConsumerMonitor.
* Interface updates.
* Doc changes.
* Update indexing-service/src/main/java/org/apache/druid/indexing/seekablestream/SeekableStreamIndexTask.java
Co-authored-by: Benedict Jin <asdf2014@apache.org>
---------
Co-authored-by: Benedict Jin <asdf2014@apache.org>
* remove extractionFn from equality, null, and range filters
changes:
* EqualityFilter, NullFilter, and RangeFilter no longer support extractionFn
* SQL planner will use ExpressionFilter in the small number of cases where an extractionFn would have been used if sqlUseBoundsAndSelectors is set to false instead of equality/null/range filters
* fix bugs and add tests with serde, equals, and cache key for null, equality, and range filters
* test coverage fixes bugs
* adjust
* adjust again
* so persnickety
* Add EARLIEST aggregator merge strategy.
- More unit tests.
- Include the aggregators analysis type by default in tests.
* Docs.
* Some comments and a test
* Collapse into individual code blocks.
changes:
* new filters that preserve match value typing to better handle filtering different column types
* sql planner uses new filters by default in sql compatible null handling mode
* remove isFilterable from column capabilities
* proper handling of array filtering, add array processor to column processors
* javadoc for sql test filter functions
* range filter support for arrays, tons more tests, fixes
* add dimension selector tests for mixed type roots
* support json equality
* rename semantic index maker thingys to mostly have plural names since they typically make many indexes, e.g. StringValueSetIndex -> StringValueSetIndexes
* add cooler equality index maker, ValueIndexes
* fix missing string utf8 index supplier
* expression array comparator stuff
This adds a new contrib extension: druid-iceberg-extensions which can be used to ingest data stored in Apache Iceberg format. It adds a new input source of type iceberg that connects to a catalog and retrieves the data files associated with an iceberg table and provides these data file paths to either an S3 or HDFS input source depending on the warehouse location.
Two important dependencies associated with Apache Iceberg tables are:
Catalog : This extension supports reading from either a Hive Metastore catalog or a Local file-based catalog. Support for AWS Glue is not available yet.
Warehouse : This extension supports reading data files from either HDFS or S3. Adapters for other cloud object locations should be easy to add by extending the AbstractInputSourceAdapter.
MSQ engine returns correct error codes for invalid user inputs in the query context. Also, using DruidExceptions for MSQ related errors happening in the Broker with improved error messages.
* Add aggregatorMergeStrategy property to SegmentMetadaQuery.
- Adds a new property aggregatorMergeStrategy to segmentMetadata query.
aggregatorMergeStrategy currently supports three types of merge strategies -
the legacy strict and lenient strategies, and the new latest strategy.
- The latest strategy considers the latest aggregator from the latest segment
by time order when there's a conflict when merging aggregators from different
segments.
- Deprecate lenientAggregatorMerge property; The API validates that both the new
and old properties are not set, and returns an exception.
- When merging segments as part of segmentMetadata query, the segments have a more
elaborate id -- <datasource>_<interval>_merged_<partition_number> format, similar to
the name format that segments usually contain. Previously it was simply "merged".
- Adjust unit tests to test the latest strategy, to assert the returned complete
SegmentAnalysis object instead of just the aggregators for completeness.
* Don't explicitly set strict strategy in tests
* Apply suggestions from code review
Co-authored-by: Katya Macedo <38017980+ektravel@users.noreply.github.com>
* Update docs/querying/segmentmetadataquery.md
* Apply suggestions from code review
Co-authored-by: Katya Macedo <38017980+ektravel@users.noreply.github.com>
---------
Co-authored-by: Katya Macedo <38017980+ektravel@users.noreply.github.com>
Uses a custom continusou jfr profiler.
Modifies the github actions for tests to do profiling only in the case
of jdk17, as the profiler requires jdk17+ to use the JFR streaming API
plus a few other language features in the code.
Continuous Profiling service is provided to the Apache Druid project
free of charge by Imply and any committer can request free access to
the UI.
Gian Merlino
Vishesh Garg
Sree Charan Manamala
Pranav
Soumyava
Abhishek Radhakrishnan
Kashif Faraz
Clint Wylie
AmatyaAvadhanula
Laksh Singla
Zoltan Haindrich
Jan Werner
Sensor
Adarsh Sanjeev
Pramod Immaneni
Abhishek Agarwal
Hiroshi Fukada
Karan Kumar
zachjsh
Benedict Jin
Sam Rash
Ben Sykes
Parth Agrawal
AlbericByte
Tom
Ankit Kothari
Rishabh Singh
sb89594
Yashdeep Thorat
Zoltan Haindrich
Simon Hofbauer
kaisun2000
Vishesh Garg
Xavier Léauté
George Shiqi Wu
Rohan Garg
Suneet Saldanha
Tejaswini Bandlamudi
Lucas Capistrant
dependabot[bot]
George Shiqi Wu
imply-cheddar
Atul Mohan