* Add supervisor /resetOffsets API.
- Add a new endpoint /druid/indexer/v1/supervisor/<supervisorId>/resetOffsets
which accepts DataSourceMetadata as a body parameter.
- Update logs, unit tests and docs.
* Add a new interface method for backwards compatibility.
* Rename
* Adjust tests and javadocs.
* Use CoreInjectorBuilder instead of deprecated makeInjectorWithModules
* UT fix
* Doc updates.
* remove extraneous debugging logs.
* Remove the boolean setting; only ResetHandle() and resetInternal()
* Relax constraints and add a new ResetOffsetsNotice; cleanup old logic.
* A separate ResetOffsetsNotice and some cleanup.
* Minor cleanup
* Add a check & test to verify that sequence numbers are only of type SeekableStreamEndSequenceNumbers
* Add unit tests for the no op implementations for test coverage
* CodeQL fix
* checkstyle from merge conflict
* Doc changes
* DOCUSAURUS code tabs fix. Thanks, Brian!
* Remove chatAsync parameter, so chat is always async.
chatAsync has been made default in Druid 26. I have seen good
battle-testing of it in production, and am comfortable removing the
older sync client.
This was the last remaining usage of IndexTaskClient, so this patch
deletes all that stuff too.
* Remove unthrown exception.
* Remove unthrown exception.
* No more TimeoutException.
* Change default handoffConditionTimeout to 15 minutes.
Most of the time, when handoff is taking this long, it's because something
is preventing Historicals from loading new data. In this case, we have
two choices:
1) Stop making progress on ingestion, wait for Historicals to load stuff,
and keep the waiting-for-handoff segments available on realtime tasks.
(handoffConditionTimeout = 0, the current default)
2) Continue making progress on ingestion, by exiting the realtime tasks
that were waiting for handoff. Once the Historicals get their act
together, the segments will be loaded, as they are still there on
deep storage. They will just not be continuously available.
(handoffConditionTimeout > 0)
I believe most users would prefer [2], because [1] risks ingestion falling
behind the stream, which causes many other problems. It can cause data loss
if the stream ages-out data before we have a chance to ingest it.
Due to the way tuningConfigs are serialized -- defaults are baked into the
serialized form that is written to the database -- this default change will
not change anyone's existing supervisors. It will take effect for newly
created supervisors.
* Fix tests.
* Update docs/development/extensions-core/kafka-supervisor-reference.md
Co-authored-by: Katya Macedo <38017980+ektravel@users.noreply.github.com>
* Update docs/development/extensions-core/kinesis-ingestion.md
Co-authored-by: Katya Macedo <38017980+ektravel@users.noreply.github.com>
---------
Co-authored-by: Katya Macedo <38017980+ektravel@users.noreply.github.com>
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
Co-authored-by: Victoria Lim <vtlim@users.noreply.github.com>
Co-authored-by: Victoria Lim <lim.t.victoria@gmail.com>
* Improve memory efficiency of WrappedRoaringBitmap.
Two changes:
1) Use an int[] for sizes 4 or below.
2) Remove the boolean compressRunOnSerialization. Doesn't save much
space, but it does save a little, and it isn't adding a ton of value
to have it be configurable. It was originally configurable in case
anything broke when enabling it, but it's been a while and nothing
has broken.
* Slight adjustment.
* Adjust for inspection.
* Updates.
* Update snaps.
* Update test.
* Adjust test.
* Fix snaps.
* Kinesis: More robust default fetch settings.
1) Default recordsPerFetch and recordBufferSize based on available memory
rather than using hardcoded numbers. For this, we need an estimate
of record size. Use 10 KB for regular records and 1 MB for aggregated
records. With 1 GB heaps, 2 processors per task, and nonaggregated
records, recordBufferSize comes out to the same as the old
default (10000), and recordsPerFetch comes out slightly lower (1250
instead of 4000).
2) Default maxRecordsPerPoll based on whether records are aggregated
or not (100 if not aggregated, 1 if aggregated). Prior default was 100.
3) Default fetchThreads based on processors divided by task count on
Indexers, rather than overall processor count.
4) Additionally clean up the serialized JSON a bit by adding various
JsonInclude annotations.
* Updates for tests.
* Additional important verify.
Main changes:
1) Convert SeekableStreamIndexTaskClient to an interface, move old code
to SeekableStreamIndexTaskClientSyncImpl, and add new implementation
SeekableStreamIndexTaskClientAsyncImpl that uses ServiceClient.
2) Add "chatAsync" parameter to seekable stream supervisors that causes
the supervisor to use an async task client.
3) In SeekableStreamSupervisor.discoverTasks, adjust logic to avoid making
blocking RPC calls in workerExec threads.
4) In SeekableStreamSupervisor generally, switch from Futures.successfulAsList
to FutureUtils.coalesce, so we can better capture the errors that occurred
with contacting individual tasks.
Other, related changes:
1) Add ServiceRetryPolicy.retryNotAvailable, which controls whether
ServiceClient retries unavailable services. Useful since we do not
want to retry calls unavailable tasks within the service client. (The
supervisor does its own higher-level retries.)
2) Add FutureUtils.transformAsync, a more lambda friendly version of
Futures.transform(f, AsyncFunction).
3) Add FutureUtils.coalesce. Similar to Futures.successfulAsList, but
returns Either instead of using null on error.
4) Add JacksonUtils.readValue overloads for JavaType and TypeReference.
Kinesis ingestion requires all shards to have at least 1 record at the required position in druid.
Even if this is satisified initially, resharding the stream can lead to empty intermediate shards. A significant delay in writing to newly created shards was also problematic.
Kinesis shard sequence numbers are big integers. Introduce two more custom sequence tokens UNREAD_TRIM_HORIZON and UNREAD_LATEST to indicate that a shard has not been read from and that it needs to be read from the start or the end respectively.
These values can be used to avoid the need to read at least one record to obtain a sequence number for ingesting a newly discovered shard.
If a record cannot be obtained immediately, use a marker to obtain the relevant shardIterator and use this shardIterator to obtain a valid sequence number. As long as a valid sequence number is not obtained, continue storing the token as the offset.
These tokens (UNREAD_TRIM_HORIZON and UNREAD_LATEST) are logically ordered to be earlier than any valid sequence number.
However, the ordering requires a few subtle changes to the existing mechanism for record sequence validation:
The sequence availability check ensures that the current offset is before the earliest available sequence in the shard. However, current token being an UNREAD token indicates that any sequence number in the shard is valid (despite the ordering)
Kinesis sequence numbers are inclusive i.e if current sequence == end sequence, there are more records left to read.
However, the equality check is exclusive when dealing with UNREAD tokens.
amazon-kinesis-client was not covered undered the apache license and required separate insertion in the kinesis extension.
This can now be avoided since it is covered, and including it within druid helps prevent incompatibilities.
Allows enabling of deaggregation out of the box by packaging amazon-kinesis-client (1.14.4) with druid for kinesis ingestion.
listShards API was used to get all the shards for kinesis ingestion to improve its resiliency as part of #12161.
However, this may require additional permissions in the IAM policy where the stream is present. (Please refer to: https://docs.aws.amazon.com/kinesis/latest/APIReference/API_ListShards.html).
A dynamic configuration useListShards has been added to KinesisSupervisorTuningConfig to control the usage of this API and prevent issues upon upgrade. It can be safely turned on (and is recommended when using kinesis ingestion) by setting this configuration to true.
* add offsetFetchPeriod to kinesis ingestion doc
* Remove jackson dependencies from extensions
* Use fixed delay for lag collection
* Metrics reset after finishing processing
* comments
* Broaden the list of exceptions to retry for
* Unit tests
* Add more tests
* Refactoring
* re-order metrics
* Doc suggestions
Co-authored-by: Charles Smith <38529548+techdocsmith@users.noreply.github.com>
* Add tests
Co-authored-by: Charles Smith <38529548+techdocsmith@users.noreply.github.com>
* Update data-formats.md
Per Suneet, "Since you're editing this file can you also fix the json on line 177 please - it's missing a comma after the }"
* Light text cleanup
* Removing discussion of sample data, since it's repeated in the data loading tutorial, and not immediately relevant here.
* Clarifying accepted values for URI lookup
* Update index.md
* original quickstart full first pass
* original quickstart full first pass
* first pass all the way through
* straggler
* image touchups and finished old tutorial
* a bit of finishing up
* druid-caffeine-cache ext previously removed
* Sample MaxDirectMemorySize value unrealistic
* Review comments
* fixing links
* spell checking gymnastics
* workerThreads desc slightly expanded
* typo
* Typo
* Reversing Kafka config order
* Changing order of configs for Kinesis
* Trying this again: ioConfig then tuningConfig
* kinesis IT
* Kinesis IT
* Kinesis IT
* Kinesis IT
* Kinesis IT
* Kinesis IT
* Kinesis IT
* Kinesis IT
* Kinesis IT
* Kinesis IT
* Kinesis IT
* Kinesis IT
* Kinesis IT
* Kinesis IT
* Kinesis IT
* fix kinesis timeout
* Kinesis IT
* Kinesis IT
* fix checkstyle
* Kinesis IT
* address comments
* fix checkstyle
* Doc update for new input source and input format.
- The input source and input format are promoted in all docs under docs/ingestion
- All input sources including core extension ones are located in docs/ingestion/native-batch.md
- All input formats and parsers including core extension ones are localted in docs/ingestion/data-formats.md
- New behavior of the parallel task with different partitionsSpecs are documented in docs/ingestion/native-batch.md
* parquet
* add warning for range partitioning with sequential mode
* hdfs + s3, gs
* add fs impl for gs
* address comments
* address comments
* gcs
Since it hasn't received updates or community interest in a while, it makes sense
to de-emphasize it in the distribution and most documentation (outside of simple
mentions of its existence).
Abhishek Radhakrishnan
317brian
Gian Merlino
Katya Macedo
Jaehui Lee
Nhi Pham
Andreas Maechler
Jill Osborne
AmatyaAvadhanula
AmatyaAvadhanula
jacobtolar
Charles Smith
Frank Chen
Vaibhav
zhangyue19921010
Yi Yuan
Charles Smith
Abhishek Agarwal
Himadri Singh
sthetland
Clint Wylie
Jian Wang
Maytas Monsereenusorn
Jihoon Son
Jonathan Wei
Chi Cao Minh