Often users are submitting queries, and ingestion specs that work only if the relevant extension is not loaded. However, the error is too technical for the users and doesn't suggest them to check for missing extensions. This PR modifies the error message so users can at least check their settings before assuming that the error is because of a bug.
The query context is a way that the user gives a hint to the Druid query engine, so that they enforce a certain behavior or at least let the query engine prefer a certain plan during query planning. Today, there are 3 types of query context params as below.
Default context params. They are set via druid.query.default.context in runtime properties. Any user context params can be default params.
User context params. They are set in the user query request. See https://druid.apache.org/docs/latest/querying/query-context.html for parameters.
System context params. They are set by the Druid query engine during query processing. These params override other context params.
Today, any context params are allowed to users. This can cause
1) a bad UX if the context param is not matured yet or
2) even query failure or system fault in the worst case if a sensitive param is abused, ex) maxSubqueryRows.
This PR adds an ability to limit context params per user role. That means, a query will fail if you have a context param set in the query that is not allowed to you. To do that, this PR adds a new built-in resource type, QUERY_CONTEXT. The resource to authorize has a name of the context param (such as maxSubqueryRows) and the type of QUERY_CONTEXT. To allow a certain context param for a user, the user should be granted WRITE permission on the context param resource. Here is an example of the permission.
{
"resourceAction" : {
"resource" : {
"name" : "maxSubqueryRows",
"type" : "QUERY_CONTEXT"
},
"action" : "WRITE"
},
"resourceNamePattern" : "maxSubqueryRows"
}
Each role can have multiple permissions for context params. Each permission should be set for different context params.
When a query is issued with a query context X, the query will fail if the user who issued the query does not have WRITE permission on the query context X. In this case,
HTTP endpoints will return 403 response code.
JDBC will throw ForbiddenException.
Note: there is a context param called brokerService that is used only by the router. This param is used to pin your query to run it in a specific broker. Because the authorization is done not in the router, but in the broker, if you have brokerService set in your query without a proper permission, your query will fail in the broker after routing is done. Technically, this is not right because the authorization is checked after the context param takes effect. However, this should not cause any user-facing issue and thus should be OK. The query will still fail if the user doesn’t have permission for brokerService.
The context param authorization can be enabled using druid.auth.authorizeQueryContextParams. This is disabled by default to avoid any hassle when someone upgrades his cluster blindly without reading release notes.
Druid currently has 2 serverViews, regular serverView and filtered serverView. The regular serverView is used to monitor all segment announcements from all data nodes (historicals, tasks, indexers). The filtered serverView is used when you want to watch segment announcements from particular tiers. Since these server views keep track of different sets of druidServers and segments in memory, they should be maintained separately. However, they currently share the same name for their executorService, which can cause confusion and make debugging harder especially in the broker since it is using both serverViews, the filtered view for normal query processing and the regular view to serve the servers table (I'm unsure whether this is intended or whether this is a good behavior). This PR changes it to a more obvious name.
This PR also removes SingleServerInventoryView. This view was deprecated a long time ago and has not been documented at least since 0.13 (#6127). I also don't think this can be better in any case than BatchServerInventoryView. Finally, I merged AbstractCuratorServerInventoryView and BatchServerInventoryView as we no longer need AbstractCuratorServerInventoryView after SingleServerInventoryView is removed.
* Make nodeRole available during binding; add support for dynamic registration of DruidService
* fix checkstyle and test
* fix customRole test
* address comments
* add more javadoc
* fix bug:MaterializedView gropuby query return map result by default
* add unit test
* add unit test
* add unit test
* fix bug:MaterializedView gropuby query return map result by default
* add unit test
* add unit test
* add unit test
* update pr
* update pr
Co-authored-by: xiangqiao <xiangqiao@kuaishou.com>
* Broker: Add ability to inline subqueries.
The main changes:
- ClientQuerySegmentWalker: Add ability to inline queries.
- Query: Add "getSubQueryId" and "withSubQueryId" methods.
- QueryMetrics: Add "subQueryId" dimension.
- ServerConfig: Add new "maxSubqueryRows" parameter, which is used by
ClientQuerySegmentWalker to limit how many rows can be inlined per
query.
- IndexedTableJoinMatcher: Allow creating keys on top of unknown types,
by assuming they are strings. This is useful because not all types are
known for fields in query results.
- InlineDataSource: Store RowSignature rather than component parts. Add
more zealous "equals" and "hashCode" methods to ease testing.
- Moved QuerySegmentWalker test code from CalciteTests and
SpecificSegmentsQueryWalker in druid-sql to QueryStackTests in
druid-server. Use this to spin up a new ClientQuerySegmentWalkerTest.
* Adjustments from CI.
* Fix integration test.
* intelliJ inspections cleanup
- remove redundant escapes
- performance warnings
- access static member via instance reference
- static method declared final
- inner class may be static
Most of these changes are aesthetic, however, they will allow inspections to
be enabled as part of CI checks going forward
The valuable changes in this delta are:
- using StringBuilder instead of string addition in a loop
indexing-hadoop/.../Utils.java
processing/.../ByteBufferMinMaxOffsetHeap.java
- Use class variables instead of static variables for parameterized test
processing/src/.../ScanQueryLimitRowIteratorTest.java
* Add intelliJ inspection warnings as errors to druid profile
* one more static inner class
* Reconcile terminology and method naming to 'used/unused segments'; Don't use terms 'enable/disable data source'; Rename MetadataSegmentManager to MetadataSegments; Make REST API methods which mark segments as used/unused to return server error instead of an empty response in case of error
* Fix brace
* Import order
* Rename withKillDataSourceWhitelist to withSpecificDataSourcesToKill
* Fix tests
* Fix tests by adding proper methods without interval parameters to IndexerMetadataStorageCoordinator instead of hacking with Intervals.ETERNITY
* More aligned names of DruidCoordinatorHelpers, rename several CoordinatorDynamicConfig parameters
* Rename ClientCompactTaskQuery to ClientCompactionTaskQuery for consistency with CompactionTask; ClientCompactQueryTuningConfig to ClientCompactionTaskQueryTuningConfig
* More variable and method renames
* Rename MetadataSegments to SegmentsMetadata
* Javadoc update
* Simplify SegmentsMetadata.getUnusedSegmentIntervals(), more javadocs
* Update Javadoc of VersionedIntervalTimeline.iterateAllObjects()
* Reorder imports
* Rename SegmentsMetadata.tryMark... methods to mark... and make them to return boolean and the numbers of segments changed and relay exceptions to callers
* Complete merge
* Add CollectionUtils.newTreeSet(); Refactor DruidCoordinatorRuntimeParams creation in tests
* Remove MetadataSegmentManager
* Rename millisLagSinceCoordinatorBecomesLeaderBeforeCanMarkAsUnusedOvershadowedSegments to leadingTimeMillisBeforeCanMarkAsUnusedOvershadowedSegments
* Fix tests, refactor DruidCluster creation in tests into DruidClusterBuilder
* Fix inspections
* Fix SQLMetadataSegmentManagerEmptyTest and rename it to SqlSegmentsMetadataEmptyTest
* Rename SegmentsAndMetadata to SegmentsAndCommitMetadata to reduce the similarity with SegmentsMetadata; Rename some methods
* Rename DruidCoordinatorHelper to CoordinatorDuty, refactor DruidCoordinator
* Unused import
* Optimize imports
* Rename IndexerSQLMetadataStorageCoordinator.getDataSourceMetadata() to retrieveDataSourceMetadata()
* Unused import
* Update terminology in datasource-view.tsx
* Fix label in datasource-view.spec.tsx.snap
* Fix lint errors in datasource-view.tsx
* Doc improvements
* Another attempt to please TSLint
* Another attempt to please TSLint
* Style fixes
* Fix IndexerSQLMetadataStorageCoordinator.createUsedSegmentsSqlQueryForIntervals() (wrong merge)
* Try to fix docs build issue
* Javadoc and spelling fixes
* Rename SegmentsMetadata to SegmentsMetadataManager, address other comments
* Address more comments
Builds on #9235, using the datasource analysis functionality to replace various ad-hoc
approaches. The most interesting changes are in ClientQuerySegmentWalker (brokers),
ServerManager (historicals), and SinkQuerySegmentWalker (indexing tasks).
Other changes related to improving how we analyze queries:
1) Changes TimelineServerView to return an Optional timeline, which I thought made
the analysis changes cleaner to implement.
2) Added QueryToolChest#canPerformSubquery, which is now used by query entry points to
determine whether it is safe to pass a subquery dataSource to the query toolchest.
Fixes an issue introduced in #5471 where subqueries under non-groupBy-typed queries
were silently ignored, since neither the query entry point nor the toolchest did
anything special with them.
3) Removes the QueryPlus.withQuerySegmentSpec method, which was mostly being used in
error-prone ways (ignoring any potential subqueries, and not verifying that the
underlying data source is actually a table). Replaces with a new function,
Queries.withSpecificSegments, that includes sanity checks.
* sketch of broker parallel merges done in small batches on fork join pool
* fix non-terminating sequences, auto compute parallelism
* adjust benches
* adjust benchmarks
* now hella more faster, fixed dumb
* fix
* remove comments
* log.info for debug
* javadoc
* safer block for sequence to yielder conversion
* refactor LifecycleForkJoinPool into LifecycleForkJoinPoolProvider which wraps a ForkJoinPool
* smooth yield rate adjustment, more logs to help tune
* cleanup, less logs
* error handling, bug fixes, on by default, more parallel, more tests
* remove unused var
* comments
* timeboundary mergeFn
* simplify, more javadoc
* formatting
* pushdown config
* use nanos consistently, move logs back to debug level, bit more javadoc
* static terminal result batch
* javadoc for nullability of createMergeFn
* cleanup
* oops
* fix race, add docs
* spelling, remove todo, add unhandled exception log
* cleanup, revert unintended change
* another unintended change
* review stuff
* add ParallelMergeCombiningSequenceBenchmark, fixes
* hyper-threading is the enemy
* fix initial start delay, lol
* parallelism computer now balances partition sizes to partition counts using sqrt of sequence count instead of sequence count by 2
* fix those important style issues with the benchmarks code
* lazy sequence creation for benchmarks
* more benchmark comments
* stable sequence generation time
* update defaults to use 100ms target time, 4096 batch size, 16384 initial yield, also update user docs
* add jmh thread based benchmarks, cleanup some stuff
* oops
* style
* add spread to jmh thread benchmark start range, more comments to benchmarks parameters and purpose
* retool benchmark to allow modeling more typical heterogenous heavy workloads
* spelling
* fix
* refactor benchmarks
* formatting
* docs
* add maxThreadStartDelay parameter to threaded benchmark
* why does catch need to be on its own line but else doesnt
* IndexerSQLMetadataStorageCoordinator.getTimelineForIntervalsWithHandle() don't fetch abutting intervals; simplify getUsedSegmentsForIntervals()
* Add VersionedIntervalTimeline.findNonOvershadowedObjectsInInterval() method; Propagate the decision about whether only visible segmetns or visible and overshadowed segments should be returned from IndexerMetadataStorageCoordinator's methods to the user logic; Rename SegmentListUsedAction to RetrieveUsedSegmentsAction, SegmetnListUnusedAction to RetrieveUnusedSegmentsAction, and UsedSegmentLister to UsedSegmentsRetriever
* Fix tests
* More fixes
* Add javadoc notes about returning Collection instead of Set. Add JacksonUtils.readValue() to reduce boilerplate code
* Fix KinesisIndexTaskTest, factor out common parts from KinesisIndexTaskTest and KafkaIndexTaskTest into SeekableStreamIndexTaskTestBase
* More test fixes
* More test fixes
* Add a comment to VersionedIntervalTimelineTestBase
* Fix tests
* Set DataSegment.size(0) in more tests
* Specify DataSegment.size(0) in more places in tests
* Fix more tests
* Fix DruidSchemaTest
* Set DataSegment's size in more tests and benchmarks
* Fix HdfsDataSegmentPusherTest
* Doc changes addressing comments
* Extended doc for visibility
* Typo
* Typo 2
* Address comment
* Fix dependency analyze warnings
Update the maven dependency plugin to the latest version and fix all
warnings for unused declared and used undeclared dependencies in the
compile scope. Added new travis job to add the check to CI. Also fixed
some source code files to use the correct packages for their imports and
updated druid-forbidden-apis to prevent regressions.
* Address review comments
* Adjust scope for org.glassfish.jaxb:jaxb-runtime
* Fix dependencies for hdfs-storage
* Consolidate netty4 versions
* Zookeeper version is updated.
* Zookeeper version is updated at licenses.yaml
* licenses.yaml is updated and dependencies are fixed to make the project successfully build.
* Zookeeper versions are fixed at licenses.yaml
* check ctyle for constant field name
* check ctyle for constant field name
* check ctyle for constant field name
* check ctyle for constant field name
* check ctyle for constant field name
* check ctyle for constant field name
* check ctyle for constant field name
* check ctyle for constant field name
* check ctyle for constant field name
* merging with upstream
* review-1
* unknow changes
* unknow changes
* review-2
* merging with master
* review-2 1 changes
* review changes-2 2
* bug fix
* Fix dependency analyze warnings
Update the maven dependency plugin to the latest version and fix all
warnings for unused declared and used undeclared dependencies in the
compile scope. Added new travis job to add the check to CI. Also fixed
some source code files to use the correct packages for their imports.
* Fix licenses and dependencies
* Fix licenses and dependencies again
* Fix integration test dependency
* Address review comments
* Fix unit test dependencies
* Fix integration test dependency
* Fix integration test dependency again
* Fix integration test dependency third time
* Fix integration test dependency fourth time
* Fix compile error
* Fix assert package
* add CachingClusteredClient benchmark, refactor some stuff
* revert WeightedServerSelectorStrategy to ConnectionCountServerSelectorStrategy and remove getWeight since felt artificial, default mergeResults in toolchest implementation for topn, search, select
* adjust javadoc
* adjustments
* oops
* use it
* use BinaryOperator, remove CombiningFunction, use Comparator instead of Ordering, other review adjustments
* rename createComparator to createResultComparator, fix typo, firstNonNull nullable parameters
Make static imports forbidden in tests and remove all occurrences to be
consistent with the non-test code.
Also, various changes to files affected by above:
- Reformat to adhere to druid style guide
- Fix various IntelliJ warnings
- Fix various SonarLint warnings (e.g., the expected/actual args to
Assert.assertEquals() were flipped)
* Prohibit assigning concurrent maps into Map-types variables and fields; Fix a race condition in CoordinatorRuleManager; improve logic in DirectDruidClient and ResourcePool
* Enforce that if compute(), computeIfAbsent(), computeIfPresent() or merge() is called on a ConcurrentHashMap, it's stored in a ConcurrentHashMap-typed variable, not ConcurrentMap; add comments explaining get()-before-computeIfAbsent() optimization; refactor Counters; fix a race condition in Intialization.java
* Remove unnecessary comment
* Checkstyle
* Fix getFromExtensions()
* Add a reference to the comment about guarded computeIfAbsent() optimization; IdentityHashMap optimization
* Fix UriCacheGeneratorTest
* Workaround issue with MaterializedViewQueryQueryToolChest
* Strengthen Appenderator's contract regarding concurrency
* blooming aggs
* partially address review
* fix docs
* minor test refactor after rebase
* use copied bloomkfilter
* add ByteBuffer methods to BloomKFilter to allow agg to use in place, simplify some things, more tests
* add methods to BloomKFilter to get number of set bits, use in comparator, fixes
* more docs
* fix
* fix style
* simplify bloomfilter bytebuffer merge, change methods to allow passing buffer offsets
* oof, more fixes
* more sane docs example
* fix it
* do the right thing in the right place
* formatting
* fix
* avoid conflict
* typo fixes, faster comparator, docs for comparator behavior
* unused imports
* use buffer comparator instead of deserializing
* striped readwrite lock for buffer agg, null handling comparator, other review changes
* style fixes
* style
* remove sync for now
* oops
* consistency
* inspect runtime shape of selector instead of selector plus, static comparator, add inner exception on serde exception
* CardinalityBufferAggregator inspect selectors instead of selectorPluses
* fix style
* refactor away from using ColumnSelectorPlus and ColumnSelectorStrategyFactory to instead use specialized aggregators for each supported column type, other review comments
* adjustment
* fix teamcity error?
* rename nil aggs to empty, change empty agg constructor signature, add comments
* use stringutils base64 stuff to be chill with master
* add aggregate combiner, comment
* Add checkstyle rules about imports and empty lines between members
* Add suppressions
* Update Eclipse import order
* Add empty line
* Fix StatsDEmitter
* Prohibit some guava collection APIs and use JDK APIs directly
* reset files that changed by accident
* sort codestyle/druid-forbidden-apis.txt alphabetically
Abhishek Agarwal
Jihoon Son
JoyKing
Clint Wylie
Jonathan Wei
xiangqiao123
Gian Merlino
Suneet Saldanha
Roman Leventov
Fangyuan Deng
jon-wei
Chi Cao Minh
Furkan KAMACI
SandishKumarHN
Fokko Driesprong
Eugene Sevastianov
Clint Wylie
David Lim
QiuMM