Changes:
- Break `NewestSegmentFirstIterator` into two parts
- `DatasourceCompactibleSegmentIterator` - this contains all the code from `NewestSegmentFirstIterator`
but now handles a single datasource and allows a priority to be specified
- `PriorityBasedCompactionSegmentIterator` - contains separate iterator for each datasource and
combines the results into a single queue to be used by a compaction search policy
- Update `NewestSegmentFirstPolicy` to use the above new classes
- Cleanup `CompactionStatistics` and `AutoCompactionSnapshot`
- Cleanup `CompactSegments`
- Remove unused methods from `Tasks`
- Remove unneeded `TasksTest`
- Move tests from `NewestSegmentFirstIteratorTest` to `CompactionStatusTest`
and `DatasourceCompactibleSegmentIteratorTest`
Description:
Compaction operations issued by the Coordinator currently run using the native query engine.
As majority of the advancements that we are making in batch ingestion are in MSQ, it is imperative
that we support compaction on MSQ to make Compaction more robust and possibly faster.
For instance, we have seen OOM errors in native compaction that MSQ could have handled by its
auto-calculation of tuning parameters.
This commit enables compaction on MSQ to remove the dependency on native engine.
Main changes:
* `DataSourceCompactionConfig` now has an additional field `engine` that can be one of
`[native, msq]` with `native` being the default.
* if engine is MSQ, `CompactSegments` duty assigns all available compaction task slots to the
launched `CompactionTask` to ensure full capacity is available to MSQ. This is to avoid stalling which
could happen in case a fraction of the tasks were allotted and they eventually fell short of the number
of tasks required by the MSQ engine to run the compaction.
* `ClientCompactionTaskQuery` has a new field `compactionRunner` with just one `engine` field.
* `CompactionTask` now has `CompactionRunner` interface instance with its implementations
`NativeCompactinRunner` and `MSQCompactionRunner` in the `druid-multi-stage-query` extension.
The objectmapper deserializes `ClientCompactionRunnerInfo` in `ClientCompactionTaskQuery` to the
`CompactionRunner` instance that is mapped to the specified type [`native`, `msq`].
* `CompactTask` uses the `CompactionRunner` instance it receives to create the indexing tasks.
* `CompactionTask` to `MSQControllerTask` conversion logic checks whether metrics are present in
the segment schema. If present, the task is created with a native group-by query; if not, the task is
issued with a scan query. The `storeCompactionState` flag is set in the context.
* Each created `MSQControllerTask` is launched in-place and its `TaskStatus` tracked to determine the
final status of the `CompactionTask`. The id of each of these tasks is the same as that of `CompactionTask`
since otherwise, the workers will be unable to determine the controller task's location for communication
(as they haven't been launched via the overlord).
* Defer more expressions in vectorized groupBy.
This patch adds a way for columns to provide GroupByVectorColumnSelectors,
which controls how the groupBy engine operates on them. This mechanism is used
by ExpressionVirtualColumn to provide an ExpressionDeferredGroupByVectorColumnSelector
that uses the inputs of an expression as the grouping key. The actual expression
evaluation is deferred until the grouped ResultRow is created.
A new context parameter "deferExpressionDimensions" allows users to control when
this deferred selector is used. The default is "fixedWidthNonNumeric", which is a
behavioral change from the prior behavior. Users can get the prior behavior by setting
this to "singleString".
* Fix style.
* Add deferExpressionDimensions to SqlExpressionBenchmark.
* Fix style.
* Fix inspections.
* Add more testing.
* Use valueOrDefault.
* Compute exprKeyBytes a bit lighter-weight.
MSQ cannot process null bytes in string fields, and the current workaround is to remove them using the REPLACE function. 'removeNullBytes' context parameter has been added which sanitizes the input string fields by removing these null bytes.
* fix NestedDataColumnIndexerV4 to not report cardinality
changes:
* fix issue similar to #16489 but for NestedDataColumnIndexerV4, which can report STRING type if it only processes a single type of values. this should be less common than the auto indexer problem
* fix some issues with sql benchmarks
* Add interface method for returning canonical lookup name
* Address review comment
* Add test in LookupReferencesManagerTest for coverage check
* Add test in LookupSerdeModuleTest for coverage check
There are a few issues with using Jackson serialization in sending datasketches between controller and worker in MSQ. This caused a blowup due to holding multiple copies of the sketch being stored.
This PR aims to resolve this by switching to deserializing the sketch payload without Jackson.
The PR adds a new query parameter used during communication between controller and worker while fetching sketches, "sketchEncoding".
If the value of this parameter is OCTET, the sketch is returned as a binary encoding, done by ClusterByStatisticsSnapshotSerde.
If the value is not the above, the sketch is encoded by Jackson as before.
* Speed up SQL IN using SCALAR_IN_ARRAY.
Main changes:
1) DruidSqlValidator now includes a rewrite of IN to SCALAR_IN_ARRAY, when the size of
the IN is above inFunctionThreshold. The default value of inFunctionThreshold
is 100. Users can restore the prior behavior by setting it to Integer.MAX_VALUE.
2) SearchOperatorConversion now generates SCALAR_IN_ARRAY when converting to a regular
expression, when the size of the SEARCH is above inFunctionExprThreshold. The default
value of inFunctionExprThreshold is 2. Users can restore the prior behavior by setting
it to Integer.MAX_VALUE.
3) ReverseLookupRule generates SCALAR_IN_ARRAY if the set of reverse-looked-up values is
greater than inFunctionThreshold.
* Revert test.
* Additional coverage.
* Update docs/querying/sql-query-context.md
Co-authored-by: Benedict Jin <asdf2014@apache.org>
* New test.
---------
Co-authored-by: Benedict Jin <asdf2014@apache.org>
MSQ sorts the columns in a highly specialized manner by byte comparisons. As such the values are serialized differently. This works well for the primitive types and primitive arrays, however complex types cannot be serialized specially.
This PR adds the support for sorting the complex columns by deserializing the value from the field and comparing it via the type strategy. This is a lot slower than the byte comparisons, however, it's the only way to support sorting on complex columns that can have arbitrary serialization not optimized for MSQ.
The primitives and the arrays are still compared via the byte comparison, therefore this doesn't affect the performance of the queries supported before the patch. If there's a sorting key with mixed complex and primitive/primitive array types, for example: longCol1 ASC, longCol2 ASC, complexCol1 DESC, complexCol2 DESC, stringCol1 DESC, longCol3 DESC, longCol4 ASC, the comparison will happen like:
longCol1, longCol2 (ASC) - Compared together via byte-comparison, since both are byte comparable and need to be sorted in ascending order
complexCol1 (DESC) - Compared via deserialization, cannot be clubbed with any other field
complexCol2 (DESC) - Compared via deserialization, cannot be clubbed with any other field, even though the prior field was a complex column with the same order
stringCol1, longCol3 (DESC) - Compared together via byte-comparison, since both are byte comparable and need to be sorted in descending order
longCol4 (ASC) - Compared via byte-comparison, couldn't be coalesced with the previous fields as the direction was different
This way, we only deserialize the field wherever required
* test scoped jdbc driver for druidtest:/// backed DruidAvaticaTestDriver
** DecoupledTestConfig is used inside the URI - this will make it possible to attach to existing things more easily
* DruidQuidemTestBase can be used to create module level set of quidem tests
* added quidem commands: !convertedPlan, !logicalPlan, !druidPlan, !nativePlan
** for these I've used some values of the Hook which was there in calcite
* there are some shortcuts with proxies(they are only used during testing) - we can probably remove those later
Issue: #14989
The initial step in optimizing segment metadata was to centralize the construction of datasource schema in the Coordinator (#14985). Thereafter, we addressed the problem of publishing schema for realtime segments (#15475). Subsequently, our goal is to eliminate the requirement for regularly executing queries to obtain segment schema information.
This is the final change which involves publishing segment schema for finalized segments from task and periodically polling them in the Coordinator.
* Avoid conversion to String in JsonReader, JsonNodeReader.
These readers were running UTF-8 decode on the provided entity to
convert it to a String, then parsing the String as JSON. The patch
changes them to parse the provided entity's input stream directly.
In order to preserve the nice error messages that include parse errors,
the readers now need to open the entity again on the error path, to
re-read the data. To make this possible, the InputEntity#open contract
is tightened to require the ability to re-open entities, and existing
InputEntity implementations are updated to allow re-opening.
This patch also renames JsonLineReaderBenchmark to JsonInputFormatBenchmark,
updates it to benchmark all three JSON readers, and adds a case that reads
fields out of the parsed row (not just creates it).
* Fixes for static analysis.
* Implement intermediateRowAsString in JsonReader.
* Enhanced JsonInputFormatBenchmark.
Renames JsonLineReaderBenchmark to JsonInputFormatBenchmark, and enhances it to
test various readers (JsonReader, JsonLineReader, JsonNodeReader) as well as
to test with/without field discovery.
changes:
* adds TypedInFilter which preserves matching sets in the native match value type
* SQL planner uses new TypedInFilter when druid.generic.useDefaultValueForNull=false (the default)
changes:
* fix issues with array_contains and array_overlap with null left side arguments
* modify singleThreaded stuff to allow optimizing Function similar to how we do for ExprMacro - removed SingleThreadSpecializable in favor of default impl of asSingleThreaded on Expr with clear javadocs that most callers shouldn't be calling it directly and should be using Expr.singleThreaded static method which uses a shuttle and delegates to asSingleThreaded instead
* add optimized 'singleThreaded' versions of array_contains and array_overlap
* add mv_harmonize_nulls native expression to use with MV_CONTAINS and MV_OVERLAP to allow them to behave consistently with filter rewrites, coercing null and [] into [null]
* fix bug with casting rhs argument for native array_contains and array_overlap expressions
* `Expr#singleThreaded` which creates a singleThreaded version of the actual expression (caching ExprEval is allowed)
* `Expr#makeSingleThreaded` to make a whole subtree of expressions 'singleThreaded' - uses `Shuttle` to create the new expression tree
* `ConstantExpr#singleThreaded` creates a specialized `ConstantExpr` which does cache the `ExprEval`
* some `@Immutable` annotations were added to make it more likely to notice that there might be something off if a similar change will be made around here for some reason
* cooler cursor filter processing allowing much smart utilization of indexes by feeding selectivity forward, with implementations for range and predicate based filters
* added new method Filter.makeFilterBundle which cursors use to get indexes and matchers for building offsets
* AND filter partitioning is now pushed all the way down, even to nested AND filters
* vector engine now uses same indexed base value matcher strategy for OR filters which partially support indexes
If lots of keys map to the same value, reversing a LOOKUP call can slow
things down unacceptably. To protect against this, this patch introduces
a parameter sqlReverseLookupThreshold representing the maximum size of an
IN filter that will be created as part of lookup reversal.
If inSubQueryThreshold is set to a smaller value than
sqlReverseLookupThreshold, then inSubQueryThreshold will be used instead.
This allows users to use that single parameter to control IN sizes if they
wish.
Adds a set of benchmark queries for measuring the planning time with the IN operator. Current results indicate that with the recent optimizations, the IN planning time with 100K expressions in the IN clause is just 3s and with 1M is 46s. For IN clause paired with OR <col>=<val> expr, the numbers are 10s and 155s for 100K and 1M, resp.
* IncrementalIndex#add is no longer thread-safe.
Following #14866, there is no longer a reason for IncrementalIndex#add
to be thread-safe.
It turns out it already was not using its selectors in a thread-safe way,
as exposed by #15615 making `testMultithreadAddFactsUsingExpressionAndJavaScript`
in `IncrementalIndexIngestionTest` flaky. Note that this problem isn't
new: Strings have been stored in the dimension selectors for some time,
but we didn't have a test that checked for that case; we only have
this test that checks for concurrent adds involving numeric selectors.
At any rate, this patch changes OnheapIncrementalIndex to no longer try
to offer a thread-safe "add" method. It also improves performance a bit
by adding a row ID supplier to the selectors it uses to read InputRows,
meaning that it can get the benefit of caching values inside the selectors.
This patch also:
1) Adds synchronization to HyperUniquesAggregator and CardinalityAggregator,
which the similar datasketches versions already have. This is done to
help them adhere to the contract of Aggregator: concurrent calls to
"aggregate" and "get" must be thread-safe.
2) Updates OnHeapIncrementalIndexBenchmark to use JMH and moves it to the
druid-benchmarks module.
* Spelling.
* Changes from static analysis.
* Fix javadoc.
* Faster parsing: reduce String usage, list-based input rows.
Three changes:
1) Reworked FastLineIterator to optionally avoid generating Strings
entirely, and reduce copying somewhat. Benefits the line-oriented
JSON, CSV, delimited (TSV), and regex formats.
2) In the delimited (TSV) format, when the delimiter is a single byte,
split on UTF-8 bytes directly.
3) In CSV and delimited (TSV) formats, use list-based input rows when
the column list is provided upfront by the user.
* Fix style.
* Fix inspections.
* Restore validation.
* Remove fastutil-extra.
* Exception type.
* Fixes for error messages.
* Fixes for null handling.
* Add ImmutableLookupMap for static lookups.
This patch adds a new ImmutableLookupMap, which comes with an
ImmutableLookupExtractor. It uses a fastutil open hashmap plus two
lists to store its data in such a way that forward and reverse
lookups can both be done quickly. I also observed footprint to be
somewhat smaller than Java HashMap + MapLookupExtractor for a 1 million
row lookup.
The main advantage, though, is that reverse lookups can be done much
more quickly than MapLookupExtractor (which iterates the entire map
for each call to unapplyAll). This speeds up the recently added
ReverseLookupRule (#15626) during SQL planning with very large lookups.
* Use in one more test.
* Fix benchmark.
* Object2ObjectOpenHashMap
* Fixes, and LookupExtractor interface update to have asMap.
* Remove commented-out code.
* Fix style.
* Fix import order.
* Add fastutil.
* Avoid storing Map entries.
* Reverse, pull up lookups in the SQL planner.
Adds two new rules:
1) ReverseLookupRule, which eliminates calls to LOOKUP by doing
reverse lookups.
2) AggregatePullUpLookupRule, which pulls up calls to LOOKUP above
GROUP BY, when the lookup is injective.
Adds configs `sqlReverseLookup` and `sqlPullUpLookup` to control whether
these rules fire. Both are enabled by default.
To minimize the chance of performance problems due to many keys mapping to
the same value, ReverseLookupRule refrains from reversing a lookup if there
are more keys than `inSubQueryThreshold`. The rationale for using this setting
is that reversal works by generating an IN, and the `inSubQueryThreshold`
describes the largest IN the user wants the planner to create.
* Add additional line.
* Style.
* Remove commented-out lines.
* Fix tests.
* Add test.
* Fix doc link.
* Fix docs.
* Add one more test.
* Fix tests.
* Logic, test updates.
* - Make FilterDecomposeConcatRule more flexible.
- Make CalciteRulesManager apply reduction rules til fixpoint.
* Additional tests, simplify code.
* Faster k-way merging using tournament trees, 8-byte key strides.
Two speedups for FrameChannelMerger (which does k-way merging in MSQ):
1) Replace the priority queue with a tournament tree, which does fewer
comparisons.
2) Compare keys using 8-byte strides, rather than 1 byte at a time.
* Adjust comments.
* Fix style.
* Adjust benchmark and test.
* Add eight-list test (power of two).
changes:
* ColumnIndexSelector now extends ColumnSelector. The only real implementation of ColumnIndexSelector, ColumnSelectorColumnIndexSelector, already has a ColumnSelector, so this isn't very disruptive
* removed getColumnNames from ColumnSelector since it was not used
* VirtualColumns and VirtualColumn getIndexSupplier method now needs argument of ColumnIndexSelector instead of ColumnSelector, which allows expression virtual columns to correctly recognize other virtual columns, fixing an issue which would incorrectly handle other virtual columns as non-existent columns instead
* fixed a bug with sql planner incorrectly not using expression filter for equality filters on columns with extractionFn and no virtual column registry
* overhaul DruidPredicateFactory to better handle 3VL
fixes some bugs caused by some limitations of the original design of how DruidPredicateFactory interacts with 3-value logic. The primary impacted area was with how filters on values transformed with expressions or extractionFn which turn non-null values into nulls, which were not possible to be modelled with the 'isNullInputUnknown' method
changes:
* adds DruidObjectPredicate to specialize string, array, and object based predicates instead of using guava Predicate
* DruidPredicateFactory now uses DruidObjectPredicate
* introduces DruidPredicateMatch enum, which all predicates returned from DruidPredicateFactory now use instead of booleans to indicate match. This means DruidLongPredicate, DruidFloatPredicate, DruidDoublePredicate, and the newly added DruidObjectPredicate apply methods all now return DruidPredicateMatch. This allows matchers and indexes
* isNullInputUnknown has been removed from DruidPredicateFactory
* rename, fix test
* adjust
* style
* npe
* more test
* fix default value mode to not match new test
I was looking into a query which was performing a bit poorly because the case_searched was touching more than 1 columns (if there is only 1 column there is a cache based evaluator).
While I was doing that I've noticed that there are a few simple things which could help a bit:
use a static TRUE/FALSE instead of creating a new object every time
create the ExprEval early for ConstantExpr -s (except the one for BigInteger which seem to have some odd contract)
return early from type autodetection
these changes mostly reduce the amount of garbage the query creates during case_searched evaluation; although ExpressionSelectorBenchmark shows some improvements ~15% - but my manual trials on the taxi dataset with 60M rows showed more improvements - probably due to the fact that these changes mostly only reduce gc pressure.
Updates ARRAY_OVERLAP to use the same ArrayContainsElement filter added in #15366 when filtering ARRAY typed columns so that it can also use indexes like ARRAY_CONTAINS.
In the current design, brokers query both data nodes and tasks to fetch the schema of the segments they serve. The table schema is then constructed by combining the schemas of all segments within a datasource. However, this approach leads to a high number of segment metadata queries during broker startup, resulting in slow startup times and various issues outlined in the design proposal.
To address these challenges, we propose centralizing the table schema management process within the coordinator. This change is the first step in that direction. In the new arrangement, the coordinator will take on the responsibility of querying both data nodes and tasks to fetch segment schema and subsequently building the table schema. Brokers will now simply query the Coordinator to fetch table schema. Importantly, brokers will still retain the capability to build table schemas if the need arises, ensuring both flexibility and resilience.
This change updates dependencies as needed and fixes tests to remove code incompatible with Java 21
As a result all unit tests now pass with Java 21.
* update maven-shade-plugin to 3.5.0 and follow-up to #15042
* explain why we need to override configuration when specifying outputFile
* remove configuration from dependency management in favor of explicit overrides in each module.
* update to mockito to 5.5.0 for Java 21 support when running with Java 11+
* continue using latest mockito 4.x (4.11.0) when running with Java 8
* remove need to mock private fields
* exclude incorrectly declared mockito dependency from pac4j-oidc
* remove mocking of ByteBuffer, since sealed classes can no longer be mocked in Java 21
* add JVM options workaround for system-rules junit plugin not supporting Java 18+
* exclude older versions of byte-buddy from assertj-core
* fix for Java 19 changes in floating point string representation
* fix missing InitializedNullHandlingTest
* update easymock to 5.2.0 for Java 21 compatibility
* update animal-sniffer-plugin to 1.23
* update nl.jqno.equalsverifier to 3.15.1
* update exec-maven-plugin to 3.1.0
* Vectorizing earliest for numeric
* Vectorizing earliest string aggregator
* checkstyle fix
* Removing unnecessary exceptions
* Ignoring tests in MSQ as earliest is not supported for numeric there
* Fixing benchmarks
* Updating tests as MSQ does not support earliest for some cases
* Addressing review comments by adding the following:
1. Checking capabilities first before creating selectors
2. Removing mockito in tests for numeric first aggs
3. Removing unnecessary tests
* Addressing issues for dictionary encoded single string columns where we can use the dictionary ids instead of the entire string
* Adding a flag for multi value dimension selector
* Addressing comments
* 1 more change
* Handling review comments part 1
* Handling review comments and correctness fix for latest_by when the time expression need not be in sorted order
* Updating numeric first vector agg
* Revert "Updating numeric first vector agg"
This reverts commit 4291709901.
* Updating code for correctness issues
* fixing an issue with latest agg
* Adding more comments and removing an unnecessary check
* Addressing null checks for tie selector and only vectorize false for quantile sketches
Clint Wylie
Kashif Faraz
Vishesh Garg
Gian Merlino
Laksh Singla
Akshat Jain
Adarsh Sanjeev
Zoltan Haindrich
Rishabh Singh
Tim Williamson
AmatyaAvadhanula
Karan Kumar
Xavier Léauté
Soumyava