Added link to the relevant section of the Basic Cluster Tuning page on each process page.
This is in order to improve access to this information, which is not easy to find through search or nav.
* Introduce defaultOnDiskStorage config for groupBy
* add debug log to groupby query config
* Apply config change suggestion from review
* Remove accidental new lines
* update default value of new default disk storage config
* update debug log to have more descriptive text
* Make maxOnDiskStorage and defaultOnDiskStorage HumanRedadableBytes
* improve test coverage
* Provide default implementation to new default method on advice of reviewer
* change kafka lookups module to not commit offsets
The current behaviour of the Kafka lookup extractor is to not commit
offsets by assigning a unique ID to the consumer group and setting
auto.offset.reset to earliest. This does the job but also pollutes the
Kafka broker with a bunch of "ghost" consumer groups that will never again be
used.
To fix this, we now set enable.auto.commit to false, which prevents the
ghost consumer groups being created in the first place.
* update docs to include new enable.auto.commit setting behaviour
* update kafka-lookup-extractor documentation
Provide some additional detail on functionality and configuration.
Hopefully this will make it clearer how the extractor works for
developers who aren't so familiar with Kafka.
* add comments better explaining the logic of the code
* add spelling exceptions for kafka lookup docs
* remove kafka lookup records from factory when record tombstoned
* update kafka lookup docs to include tombstone behaviour
* change test wait time down to 10ms
Co-authored-by: David Palmer <david.palmer@adscale.co.nz>
* Adjust "in" filter null behavior to match "selector".
Now, both of them match numeric nulls if constructed with a "null" value.
This is consistent as far as native execution goes, but doesn't match
the behavior of SQL = and IN. So, to address that, this patch also
updates the docs to clarify that the native filters do match nulls.
This patch also updates the SQL docs to describe how Boolean logic is
handled in addition to how NULL values are handled.
Fixes#12856.
* Fix test.
Kinesis ingestion requires all shards to have at least 1 record at the required position in druid.
Even if this is satisified initially, resharding the stream can lead to empty intermediate shards. A significant delay in writing to newly created shards was also problematic.
Kinesis shard sequence numbers are big integers. Introduce two more custom sequence tokens UNREAD_TRIM_HORIZON and UNREAD_LATEST to indicate that a shard has not been read from and that it needs to be read from the start or the end respectively.
These values can be used to avoid the need to read at least one record to obtain a sequence number for ingesting a newly discovered shard.
If a record cannot be obtained immediately, use a marker to obtain the relevant shardIterator and use this shardIterator to obtain a valid sequence number. As long as a valid sequence number is not obtained, continue storing the token as the offset.
These tokens (UNREAD_TRIM_HORIZON and UNREAD_LATEST) are logically ordered to be earlier than any valid sequence number.
However, the ordering requires a few subtle changes to the existing mechanism for record sequence validation:
The sequence availability check ensures that the current offset is before the earliest available sequence in the shard. However, current token being an UNREAD token indicates that any sequence number in the shard is valid (despite the ordering)
Kinesis sequence numbers are inclusive i.e if current sequence == end sequence, there are more records left to read.
However, the equality check is exclusive when dealing with UNREAD tokens.
* Improved Java 17 support and Java runtime docs.
1) Add a "Java runtime" doc page with information about supported
Java versions, garbage collection, and strong encapsulation..
2) Update asm and equalsverifier to versions that support Java 17.
3) Add additional "--add-opens" lines to surefire configuration, so
tests can pass successfully under Java 17.
4) Switch openjdk15 tests to openjdk17.
5) Update FrameFile to specifically mention Java runtime incompatibility
as the cause of not being able to use Memory.map.
6) Update SegmentLoadDropHandler to log an error for Errors too, not
just Exceptions. This is important because an IllegalAccessError is
encountered when the correct "--add-opens" line is not provided,
which would otherwise be silently ignored.
7) Update example configs to use druid.indexer.runner.javaOptsArray
instead of druid.indexer.runner.javaOpts. (The latter is deprecated.)
* Adjustments.
* Use run-java in more places.
* Add run-java.
* Update .gitignore.
* Exclude hadoop-client-api.
Brought in when building on Java 17.
* Swap one more usage of java.
* Fix the run-java script.
* Fix flag.
* Include link to Temurin.
* Spelling.
* Update examples/bin/run-java
Co-authored-by: Xavier Léauté <xl+github@xvrl.net>
Co-authored-by: Xavier Léauté <xl+github@xvrl.net>
* Use nonzero default value of maxQueuedBytes.
The purpose of this parameter is to prevent the Broker from running out
of memory. The prior default is unlimited; this patch changes it to a
relatively conservative 25MB.
This may be too low for larger clusters. The risk is that throughput
can decrease for queries with large resultsets or large amounts of intermediate
data. However, I think this is better than the risk of the prior default, which
is that these queries can cause the Broker to go OOM.
* Alter calculation.
* Add clarification for combining input source
* Update inputFormat note
* Update maxNumConcurrentSubTasks note
* Fix broken link
* Update docs/ingestion/native-batch-input-source.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* initial commit of bucket dimensions for metrics
return counts of segments that have rowcount in a bucket size for a datasource
return average value of rowcount per segment in a datasource
added unit test
naming could use a lot of work
buckets right now are not finalized
added javadocs
altered metrics.md
* fix checkstyle issues
* addressed review comments
add monitor test
move added functionality to new monitor
update docs
* address comments
renamed monitor
handle tombstones better
update docs
added javadocs
* Add support for tombstones in the segment distribution
* undo changes to tombstone segmentizer factory
* fix accidental whitespacing changes
* address comments regarding metrics documentation
and rename variable to be more accurate
* fix tests
* fix checkstyle issues
* fix broken test
* undo removal of timeout
* Automatic sizing for GroupBy dictionary sizes.
Merging and selector dictionary sizes currently both default to 100MB.
This is not optimal, because it can lead to OOM on small servers and
insufficient resource utilization on larger servers. It also invites
end users to try to tune it when queries run out of dictionary space,
which can make things worse if the end user sets it to too high.
So, this patch:
- Adds automatic tuning for selector and merge dictionaries. Selectors
use up to 15% of the heap and merge buffers use up to 30% of the heap
(aggregate across all queries).
- Updates out-of-memory error messages to emphasize enabling disk
spilling vs. increasing memory parameters. With the memory parameters
automatically sized, it is more likely that an end user will get
benefit from enabling disk spilling.
- Removes the query context parameters that allow lowering of configured
dictionary sizes. These complicate the calculation, and I don't see a
reasonable use case for them.
* Adjust tests.
* Review adjustments.
* Additional comment.
* Remove unused import.
* IMPLY-12348: Updated description of UNION ALL
* Update docs/querying/sql.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/querying/sql.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update sql.md
* Update docs/querying/sql.md
Co-authored-by: Victoria Lim <vtlim@users.noreply.github.com>
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
Co-authored-by: Victoria Lim <vtlim@users.noreply.github.com>
In a heterogeneous environment, sometimes you don't have control over the input folder. Upstream can put any folder they want. In this situation the S3InputSource.java is unusable.
Most people like me solved it by using Airflow to fetch the full list of parquet files and pass it over to Druid. But doing this explodes the JSON spec. We had a situation where 1 of the JSON spec is 16MB and that's simply too much for Overlord.
This patch allows users to pass {"filter": "*.parquet"} and let Druid performs the filtering of the input files.
I am using the glob notation to be consistent with the LocalFirehose syntax.
* Add TIME_IN_INTERVAL SQL operator.
The operator is implemented as a convertlet rather than an
OperatorConversion, because this allows it to be equivalent to using
the >= and < operators directly.
* SqlParserPos cannot be null here.
* Remove unused import.
* Doc updates.
* Add words to dictionary.
* Service stdout log files, move logs to log/.
Two changes that make log behavior cleaner:
1) Redirect messages from the Java runtime to their own log files.
Otherwise, they would get jumbled up in the output of the all-in-one
start command.
2) Use log/ instead of bin/log/ for the default log directory. Makes them
easier to find.
Additionally, add documentation about how to avoid the reflective
access warnings in Java 11.
* Spelling.
* See if code formatting affects spelling.
* Small addition to Multitenancy considerations doc
* Update docs/querying/multitenancy.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update multitenancy.md
Edit suggested by @kfaraz
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Adding zstandard compression library
* 1. Took @clintropolis's advice to have ZStandard decompressor use the byte array when the buffers are not direct.
2. Cleaned up checkstyle issues.
* Fixing zstandard version to latest stable version in pom's and updating license files
* Removing zstd from benchmarks and adding to processing (poms)
* fix the intellij inspection issue
* Removing the prefix v for the version in the license check for ztsd
* Fixing license checks
Co-authored-by: Rahul Gidwani <r_gidwani@apple.com>
* Emit state of replace and append for native batch tasks
* Emit count of one depending on batch ingestion mode (APPEND, OVERWRITE, REPLACE)
* Add metric to compaction job
* Avoid null ptr exc when null emitter
* Coverage
* Emit tombstone & segment counts
* Tasks need a type
* Spelling
* Integrate BatchIngestionMode in batch ingestion tasks functionality
* Typos
* Remove batch ingestion type from metric since it is already in a dimension. Move IngestionMode to AbstractTask to facilitate having mode as a dimension. Add metrics to streaming. Add missing coverage.
* Avoid inner class referenced by sub-class inspection. Refactor computation of IngestionMode to make it more robust to null IOConfig and fix test.
* Spelling
* Avoid polluting the Task interface
* Rename computeCompaction methods to avoid ambiguous java compiler error if they are passed null. Other minor cleanup.
* ConcurrentGrouper: Add option to always slice up merge buffers thread-locally.
Normally, the ConcurrentGrouper shares merge buffers across processing
threads until spilling starts, and then switches to a thread-local model.
This minimizes memory use and reduces likelihood of spilling, which is
good, but it creates thread contention. The new mergeThreadLocal option
causes a query to start in thread-local mode immediately, and allows us
to experiment with the relative performance of the two modes.
* Fix grammar in docs.
* Fix race in ConcurrentGrouper.
* Fix issue with timeouts.
* Remove unused import.
* Add "tradeoff" to dictionary.
* SQL: Add is_active to sys.segments, update examples and docs.
is_active is short for:
(is_published = 1 AND is_overshadowed = 0) OR is_realtime = 1
It's important because this represents "all the segments that should
be queryable, whether or not they actually are right now". Most of the
time, this is the set of segments that people will want to look at.
The web console already adds this filter to a lot of its queries,
proving its usefulness.
This patch also reworks the caveat at the bottom of the sys.segments
section, so its information is mixed into the description of each result
field. This should make it more likely for people to see the information.
* Wording updates.
* Adjustments for spellcheck.
* Adjust IT.
* Improved docs for range partitioning.
1) Clarify the benefits of range partitioning.
2) Clarify which filters support pruning.
3) Include the fact that multi-value dimensions cannot be used for partitioning.
* Additional clarification.
* Update other section.
* Another adjustment.
* Updates from review.
* docs(fix): clarify how worker.version and minWorkerVersion comparison works
* Revert "docs(fix): clarify how worker.version and minWorkerVersion comparison works"
This reverts commit cadd1fdc60.
* docs(fix): clarify how worker.version and minWorkerVersion comparison works
* Apply suggestions from code review
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/configuration/index.md
fix spelling
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
In the majority of cases, this improves performance.
There's only one case I'm aware of where this may be a net negative: for time_floor(__time, <period>) where there are many repeated __time values. In nonvectorized processing, SingleLongInputCachingExpressionColumnValueSelector implements an optimization to avoid computing the time_floor function on every row. There is no such optimization in vectorized processing.
IMO, we shouldn't mention this in the docs. Rationale: It's too fiddly of a thing: it's not guaranteed that nonvectorized processing will be faster due to the optimization, because it would have to overcome the inherent speed advantage of vectorization. So it'd always require testing to determine the best setting for a specific dataset. It would be bad if users disabled vectorization thinking it would speed up their queries, and it actually slowed them down. And even if users do their own testing, at some point in the future we'll implement the optimization for vectorized processing too, and it's likely that users that explicitly disabled vectorization will continue to have it disabled. I'd like to avoid this outcome by encouraging all users to enable vectorization at all times. Really advanced users would be following development activity anyway, and can read this issue
Currently all Druid processes share the same log4j2 configuration file located in _common directory. Since peon processes are spawned by middle manager process, they derivate the environment variables from the middle manager. These variables include those in the log4j2.xml controlling to which file the logger writes the log.
But current task logging mechanism requires the peon processes to output the log to console so that the middle manager can redirect the console output to a file and upload this file to task log storage.
So, this PR imposes this requirement to peon processes, whatever the configuration is in the shared log4j2.xml, peon processes always write the log to console.
setting thread names takes a measurable amount of time in the case where segment scans are very quick. In high-QPS testing we found a slight performance boost from turning off processing thread renaming. This option makes that possible.
Allow a Druid cluster to kill segments whose interval_end is a date in the future. This can be done by setting druid.coordinator.kill.durationToRetain to a negative period. For example PT-24H would allow segments to be killed if their interval_end date was 24 hours or less into the future at the time that the kill task is generated by the system.
A cluster operator can also disregard the druid.coordinator.kill.durationToRetain entirely by setting a new configuration, druid.coordinator.kill.ignoreDurationToRetain=true. This ignores interval_end date when looking for segments to kill, and instead is capable of killing any segment marked unused. This new configuration is off by default, and a cluster operator should fully understand and accept the risks if they enable it.
* Add feature flag for sql planning of TimeBoundary queries
* fixup! Add feature flag for sql planning of TimeBoundary queries
* Add documentation for enableTimeBoundaryPlanning
* fixup! Add documentation for enableTimeBoundaryPlanning
This PR is to measure how long a task stays in the pending queue and emits the value with the metric task/pending/time. The metric is measured in RemoteTaskRunner and HttpRemoteTaskRunner.
An example of the metric:
```
2022-04-26T21:59:09,488 INFO [rtr-pending-tasks-runner-0] org.apache.druid.java.util.emitter.core.LoggingEmitter - {"feed":"metrics","timestamp":"2022-04-26T21:59:09.487Z","service":"druid/coordinator","host":"localhost:8081","version":"2022.02.0-iap-SNAPSHOT","metric":"task/pending/time","value":8,"dataSource":"wikipedia","taskId":"index_parallel_wikipedia_gecpcglg_2022-04-26T21:59:09.432Z","taskType":"index_parallel"}
```
------------------------------------------
Key changed/added classes in this PR
Emit metric task/pending/time in classes RemoteTaskRunner and HttpRemoteTaskRunner.
Update related factory classes and tests.
* Reduce allocations due to Jackson serialization.
This patch attacks two sources of allocations during Jackson
serialization:
1) ObjectMapper.writeValue and JsonGenerator.writeObject create a new
DefaultSerializerProvider instance for each call. It has lots of
fields and creates pressure on the garbage collector. So, this patch
adds helper functions in JacksonUtils that enable reuse of
SerializerProvider objects and updates various call sites to make
use of this.
2) GroupByQueryToolChest copies the ObjectMapper for every query to
install a special module that supports backwards compatibility with
map-based rows. This isn't needed if resultAsArray is set and
all servers are running Druid 0.16.0 or later. This release was a
while ago. So, this patch disables backwards compatibility by default,
which eliminates the need to copy the heavyweight ObjectMapper. The
patch also introduces a configuration option that allows admins to
explicitly enable backwards compatibility.
* Add test.
* Update additional call sites and add to forbidden APIs.
* Update caching.md
Knowledge from https://the-asf.slack.com/archives/CJ8D1JTB8/p1597781107153900
Update caching.md
A few additional updates OTBO https://the-asf.slack.com/archives/CJ8D1JTB8/p1608669046041300
* Update caching.md
Typos
* Amendments on the segment cache
Significant updates on content around the segment cache, pull process, and in-memory cache
* Update docs/design/historical.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/design/historical.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/design/historical.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/design/historical.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/design/historical.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/design/historical.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/querying/caching.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/querying/caching.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/querying/caching.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/querying/caching.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/design/historical.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/design/historical.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/design/historical.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/operations/basic-cluster-tuning.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/querying/caching.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/querying/caching.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/querying/caching.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/querying/caching.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/querying/caching.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/operations/basic-cluster-tuning.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update basic-cluster-tuning.md
typo
* Update docs/querying/caching.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Whole-query caching update
Made more succinct and removed specific config to change.
* Update docs/design/historical.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update ingestion-spec.md
Added indexSpecForIntermediatePersists as a common configuration property.
* Update ingestion-spec.md
Amended to remove "below" and add link to the table.
* Update ingestion-spec.md
Removed passive.
* Optionally load segment index files into page cache on bootstrap and new segment download
* Fix unit test failure
* Fix test case
* fix spelling
* fix spelling
* fix test and test coverage issues
Co-authored-by: Jian Wang <wjhypo@gmail.com>
* fix(docs): clarify what s3 permissions are needed based on the permissions model
* fix typo
* Update docs/development/extensions-core/s3.md
Co-authored-by: Jihoon Son <jihoonson@apache.org>
Co-authored-by: Jihoon Son <jihoonson@apache.org>
* add data format and example for featureSpec
* add second feature in example
* Apply suggestions from code review
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
amazon-kinesis-client was not covered undered the apache license and required separate insertion in the kinesis extension.
This can now be avoided since it is covered, and including it within druid helps prevent incompatibilities.
Allows enabling of deaggregation out of the box by packaging amazon-kinesis-client (1.14.4) with druid for kinesis ingestion.
The current default value of inputSegmentSizeBytes is 400MB, which is pretty
low for most compaction use cases. Thus most users are forced to override the
default.
The default value is now increased to Long.MAX_VALUE.
listShards API was used to get all the shards for kinesis ingestion to improve its resiliency as part of #12161.
However, this may require additional permissions in the IAM policy where the stream is present. (Please refer to: https://docs.aws.amazon.com/kinesis/latest/APIReference/API_ListShards.html).
A dynamic configuration useListShards has been added to KinesisSupervisorTuningConfig to control the usage of this API and prevent issues upon upgrade. It can be safely turned on (and is recommended when using kinesis ingestion) by setting this configuration to true.
* Counting nulls in String cardinality with a config
* Adding tests for the new config
* Wrapping the vectorize part to allow backward compatibility
* Adding different tests, cleaning the code and putting the check at the proper position, handling hasRow() and hasValue() changes
* Updating testcase and code
* Adding null handling test to improve coverage
* Checkstyle fix
* Adding 1 more change in docs
* Making docs clearer
* Docs: Masking S3 creds and some rewording
Knowledge transfer from https://groups.google.com/g/druid-user/c/FydcpFrA688
* Removed bold in one of the quote sections
* Update s3.md
* Update s3.md
Quick grammar change
* Update docs/development/extensions-core/s3.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/development/extensions-core/s3.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/development/extensions-core/s3.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/development/extensions-core/s3.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/development/extensions-core/s3.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update s3.md
Typo
* Update docs/development/extensions-core/s3.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update s3.md
Active lang
* Update s3.md
LAng nit
* Update native-batch.md
LAng nit
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Grammar tidy-up and link fix
Corrected 2 x links to old page H2s, resolved the question around precedence, and some other grammatical changes.
* Update docs/development/extensions-core/s3.md
* Update s3.md
Removed an Erroneous E
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update math-expr.md
Link back to transformSpec
* Update ingestion-spec.md
Moved info about using the timestamp inside transforms into the actual timestamp section.
* Update ingestion-spec.md
Active language.
* Update ingestion-spec.md
Added best practice point to dimensions description.
* Update docs/ingestion/ingestion-spec.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* add docs for request logging
* remove stray character
* Update docs/operations/request-logging.md
Co-authored-by: TSFenwick <tsfenwick@gmail.com>
* Apply suggestions from code review
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
Co-authored-by: TSFenwick <tsfenwick@gmail.com>
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
Added Calcites InQueryThreshold as a query context parameter. Setting this parameter appropriately reduces the time taken for queries with large number of values in their IN conditions.
Add config for eager / lazy connection initialization in ResourcePool
Description
Currently, when multiple tasks are launched, each of them eagerly initializes a full pool's worth of connections to the coordinator.
While this is acceptable when the parameter for number of eagerConnections (== maxSize) is small, this can be problematic in environments where it's a large value (say 1000) and multiple tasks are launched simultaneously, which can cause a large number of connections to be created to the coordinator, thereby overwhelming it.
Patch
Nodes like the broker may require eager initialization of resources and do not create connections with the Coordinator.
It is unnecessary to do this with other types of nodes.
A config parameter eagerInitialization is added, which when set to true, initializes the max permissible connections when ResourcePool is initialized.
If set to false, lazy initialization of connection resources takes place.
NOTE: All nodes except the broker have this new parameter set to false in the quickstart as part of this PR
Algorithm
The current implementation relies on the creation of maxSize resources eagerly.
The new implementation's behaviour is as follows:
If a resource has been previously created and is available, lend it.
Else if the number of created resources is less than the allowed parameter, create and lend it.
Else, wait for one of the lent resources to be returned.
* Tombstone support for replace functionality
* A used segment interval is the interval of a current used segment that overlaps any of the input intervals for the spec
* Update compaction test to match replace behavior
* Adapt ITAutoCompactionTest to work with tombstones rather than dropping segments. Add support for tombstones in the broker.
* Style plus simple queriableindex test
* Add segment cache loader tombstone test
* Add more tests
* Add a method to the LogicalSegment to test whether it has any data
* Test filter with some empty logical segments
* Refactor more compaction/dropexisting tests
* Code coverage
* Support for all empty segments
* Skip tombstones when looking-up broker's timeline. Discard changes made to tool chest to avoid empty segments since they will no longer have empty segments after lookup because we are skipping over them.
* Fix null ptr when segment does not have a queriable index
* Add support for empty replace interval (all input data has been filtered out)
* Fixed coverage & style
* Find tombstone versions from lock versions
* Test failures & style
* Interner was making this fail since the two segments were consider equal due to their id's being equal
* Cleanup tombstone version code
* Force timeChunkLock whenever replace (i.e. dropExisting=true) is being used
* Reject replace spec when input intervals are empty
* Documentation
* Style and unit test
* Restore test code deleted by mistake
* Allocate forces TIME_CHUNK locking and uses lock versions. TombstoneShardSpec added.
* Unused imports. Dead code. Test coverage.
* Coverage.
* Prevent killer from throwing an exception for tombstones. This is the killer used in the peon for killing segments.
* Fix OmniKiller + more test coverage.
* Tombstones are now marked using a shard spec
* Drop a segment factory.json in the segment cache for tombstones
* Style
* Style + coverage
* style
* Add TombstoneLoadSpec.class to mapper in test
* Update core/src/main/java/org/apache/druid/segment/loading/TombstoneLoadSpec.java
Typo
Co-authored-by: Jonathan Wei <jon-wei@users.noreply.github.com>
* Update docs/configuration/index.md
Missing
Co-authored-by: Jonathan Wei <jon-wei@users.noreply.github.com>
* Typo
* Integrated replace with an existing test since the replace part was redundant and more importantly, the test file was very close or exceeding the 10 min default "no output" CI Travis threshold.
* Range does not work with multi-dim
Co-authored-by: Jonathan Wei <jon-wei@users.noreply.github.com>
* GroupBy: Cap dictionary-building selector memory usage.
New context parameter "maxSelectorDictionarySize" controls when the
per-segment processing code should return early and trigger a trip
to the merge buffer.
Includes:
- Vectorized and nonvectorized implementations.
- Adjustments to GroupByQueryRunnerTest to exercise this code in
the v2SmallDictionary suite. (Both the selector dictionary and
the merging dictionary will be small in that suite.)
- Tests for the new config parameter.
* Fix issues from tests.
* Add "pre-existing" to dictionary.
* Simplify GroupByColumnSelectorStrategy interface by removing one of the writeToKeyBuffer methods.
* Adjustments from review comments.
There aren't any changes in this patch that improve Java 11
compatibility; these changes have already been done separately. This
patch merely updates documentation and explicit Java version checks.
The log message adjustments in DruidProcessingConfig are there to make
things a little nicer when running in Java 11, where we can't measure
direct memory _directly_, and so we may auto-size processing buffers
incorrectly.
* add a new query laning metrics to visualize lane assignment
* fixes :spotbugs check
* Update docs/operations/metrics.md
Co-authored-by: Benedict Jin <asdf2014@apache.org>
* Update server/src/main/java/org/apache/druid/server/QueryScheduler.java
Co-authored-by: Benedict Jin <asdf2014@apache.org>
* Update server/src/main/java/org/apache/druid/server/QueryScheduler.java
Co-authored-by: Benedict Jin <asdf2014@apache.org>
Co-authored-by: Benedict Jin <asdf2014@apache.org>
Azure Blob storage has multiple modes of authentication. One of them is Shared access resource
. This is very useful in cases when we do not want to add the account key in the druid properties .
As part of #12078 one of the followup's was to have a specific config which does not allow accidental unnesting of multi value columns if such columns become part of the grouping key.
Added a config groupByEnableMultiValueUnnesting which can be set in the query context.
The default value of groupByEnableMultiValueUnnesting is true, therefore it does not change the current engine behavior.
If groupByEnableMultiValueUnnesting is set to false, the query will fail if it encounters a multi-value column in the grouping key.
* Moving in filter check to broker
* Adding more unit tests, making error message meaningful
* Spelling and doc changes
* Updating default to -1 and making this feature hide by default. The number of IN filters can grow upto a max limit of 100
* Removing upper limit of 100, updated docs
* Making documentation more meaningful
* Moving check outside to PlannerConfig, updating test cases and adding back max limit
* Updated with some additional code comments
* Missed removing one line during the checkin
* Addressing doc changes and one forbidden API correction
* Final doc change
* Adding a speling exception, correcting a testcase
* Reading entire filter tree to address combinations of ANDs and ORs
* Specifying in docs that, this case works only for ORs
* Revert "Reading entire filter tree to address combinations of ANDs and ORs"
This reverts commit 81ca8f8496.
* Covering a class cast exception and updating docs
* Counting changed
Co-authored-by: Jihoon Son <jihoonson@apache.org>
In extreme cases where many parallel indexing jobs are submitted together, it is possible
that the `ParallelIndexSupervisorTasks` take up all slots leaving no slot to schedule
their own sub-tasks thus stalling progress of all the indexing jobs.
Key changes:
- Add config `druid.indexer.runner.parallelIndexTaskSlotRatio` to limit the task slots
for `ParallelIndexSupervisorTasks` per worker
- `ratio = 1` implies supervisor tasks can use all slots on a worker if needed (default behavior)
- `ratio = 0` implies supervisor tasks can not use any slot on a worker
(actually, at least 1 slot is always available to ensure progress of parallel indexing jobs)
- `ImmutableWorkerInfo.canRunTask()`
- `WorkerHolder`, `ZkWorker`, `WorkerSelectUtils`
* refactor and link fixes
* add sql docs to left nav
* code format for needle
* updated web console script
* link fixes
* update earliest/latest functions
* edits for grammar and style
* more link fixes
* another link
* update with #12226
* update .spelling file
* array_concat_agg and array_agg support for array inputs
changes:
* added array_concat_agg to aggregate arrays into a single array
* added array_agg support for array inputs to make nested array
* added 'shouldAggregateNullInputs' and 'shouldCombineAggregateNullInputs' to fix a correctness issue with STRING_AGG and ARRAY_AGG when merging results, with dual purpose of being an optimization for aggregating
* fix test
* tie capabilities type to legacy mode flag about coercing arrays to strings
* oops
* better javadoc
* add new doc
* Apply suggestions from code review
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* reorder query laning properties
* rename doc
* new name in doc header
* organize material into "service tiering" section
* text edits and update sidebars.json
* update query laning
* how queries get assigned to lanes
* add more details to intro; use more consistent terminology
* more content
* Apply suggestions from code review
Co-authored-by: Jihoon Son <jihoonson@apache.org>
* Update docs/operations/mixed-workloads.md
* Apply suggestions from code review
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* typo
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
Co-authored-by: Jihoon Son <jihoonson@apache.org>
* Use Druid's extension loading for integration test instead of maven
* fix maven command
* override config path
* load input format extensions and kafka by default; add prepopulated-data group
* all docker-composes are overridable
* fix s3 configs
* override config for all
* fix docker_compose_args
* fix security tests
* turn off debug logs for overlord api calls
* clean up stuff
* revert docker-compose.yml
* fix override config for query error test; fix circular dependency in docker compose
* add back some dependencies in docker compose
* new maven profile for integration test
* example file filter
* Thread pool for broker
* Updating two tests to improve coverage for new method added
* Updating druidProcessingConfigTest to cover coverage
* Adding missed spelling errors caused in doc
* Adding test to cover lines of new function added
* Add jsonPath functions support
* Add jsonPath function test for Avro
* Add jsonPath function length() to Orc
* Add jsonPath function length() to Parquet
* Add more tests to ORC format
* update doc
* Fix exception during ingestion
* Add IT test case
* Revert "Fix exception during ingestion"
This reverts commit 5a5484b9ea.
* update IT test case
* Add 'keys()'
* Commit IT test case
* Fix UT
* clean up the balancing code around the batched vs deprecated way of sampling segments to balance
* fix docs, clarify comments, add deprecated annotations to legacy code
* remove unused variable
* update dynamic config dialog in console to state percentOfSegmentsToConsiderPerMove deprecated
* fix dynamic config text for percentOfSegmentsToConsiderPerMove
* run prettier to cleanup coordinator-dynamic-config.tsx changes
* update jest snapshot
* update documentation per review feedback
* fix bug where queries fail immediately when timeout is 0 instead of using default timeout
* fix to use serverside max
* more better
* less flaky test
* oops
* Metrics docs layout and info about query/bytes
Knowledge transfer from https://groups.google.com/g/druid-user/c/8fiflmSEoTQ - updated the layout of the Metrics part, adding links between docs pages.
Update index.md
Amended typo
* Update docs/configuration/index.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/configuration/index.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/operations/metrics.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/operations/metrics.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/operations/metrics.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Feedback applied
Http --> HTTP and moved content / removed >
* Update docs/configuration/index.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/configuration/index.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update rollup.md
Added SE tip around roll-up.
* Update docs/ingestion/rollup.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Make nodeRole available during binding; add support for dynamic registration of DruidService
* fix checkstyle and test
* fix customRole test
* address comments
* add more javadoc
* apply log file rolling strategy
* fix doc
Signed-off-by: frank chen <frank.chen021@outlook.com>
* Use absolute log path and allow spaces in log path
* Update log4j2 configuration
* apply FileAppender to ZooKeeper
* DO NOT redirect application's console log to file in supervisor
changes:
* adds new config, druid.expressions.useStrictBooleans which make longs the official boolean type of all expressions
* vectorize logical operators and boolean functions, some only if useStrictBooleans is true
under "Aggregators", about the lgK setting, it said "Must be a power of 2 from 4 to 21 inclusively." 21 is not a power of 2, nor is 12, the given default. I think there may have been confusion because lgK represents log2 of K. We could say "K must be a power of 2...", or just say lgK must be between 4 and 21.
Currently, when we try to do EXPLAIN PLAN FOR, it returns the structure of the SQL parsed (via Calcite's internal planner util), which is verbose (since it tries to explain about the nodes in the SQL, instead of the Druid Query), and not representative of the native Druid query which will get executed on the broker side.
This PR aims to change the format when user tries to EXPLAIN PLAN FOR for queries which are executed by converting them into Druid's native queries (i.e. not sys schemas).
Add the ability to pass time column in first/last aggregator (and latest/earliest SQL functions). It is to support cases where the time to query upon is stored as a part of a column different than __time. Also, some other logical time column can be specified.
* add impl
* fix checkstyle
* add test
* add test
* add unit tests
* fix unit tests
* fix unit tests
* fix unit tests
* add IT
* add IT
* add comments
* fix spelling
* Corrected admonition issue
* Update data-formats.md
Removed all admonition bits, and took out sf linebreaks.
* Update data-formats.md
Changed the shocker line into something a little more practical.
* Add inline native query example to tutorial
Minor change to the tutorial that adds an example of a native HTTP query request body, and adds a link to the more detailed "native query over HTTP" documentation.
* cleanup
* Apply suggestions from code review.
Co-authored-by: sthetland <steve.hetland@imply.io>
Co-authored-by: sthetland <steve.hetland@imply.io>
* Add worker category as dimension in TaskSlotCountStatsMonitor
* Change description
* Add workerConfig as field
* Modify HttpRemoteTaskRunnerTest to test worker category in taskslot metrics
* Fixing tests
* Fixing alerts
* Adding unit test in SingleTaskBackgroundRunnerTest for task slot metrics APIs
* Resolving false positive spell check
* addressing comments
* throw UnsupportedOperationException for tasklotmetrics APIs in SingleTaskBackgroundRunner
Co-authored-by: Nikhil Navadiya <nnavadiya@twitter.com>
* IMPLY-4344: Adding safe divide function along with testcases and documentation updates
* Changing based on review comments
* Addressing review comments, fixing coding style, docs and spelling
* Checkstyle passes for all code
* Fixing expected results for infinity
* Revert "Fixing expected results for infinity"
This reverts commit 5fd5cd480d.
* Updating test result and a space in docs
* Use a simple class to sanitize sanitizable errors and log them
The purpose of this is to sanitize JDBC errors, but can sanitize other errors
if they implement SanitizableError Interface
add a class to log errors and sanitize them
added a simple test that tests out that the error gets sanitized
add @NonNull annotation to serverconfig's ErrorResponseTransfromStrategy
* return less information as part of too many connections, and instead only log specific details
This is so an end user gets relevant information but not too much info since they might now how
many brokers they have
* return only runtime exceptions
added new error types that need to be sanitized
also sanitize deprecated and unsupported exceptions.
* dont reqrewite exceptions unless necessary for checked exceptions
add docs
avoid blanket turning all exceptions into runtime exceptions
* address comments, to fix up docs.
add more javadocs
add support UOE sanitization
* use try catch instead and sanitize at public methods
* checkstyle fixes
* throw noSuchStatement and NoSuchConnection as Avatica is affected by those
* address comments. move log error back to druid meta
clean up bad formatting and commented code. add missed catch for NoSuchStatementException
clean up comments for error handler and add comment explainging not wanting to santize avatica exceptions
* alter test to reflect new error message
* revert ColumnAnalysis type, add typeSignature and use it for DruidSchema
* review stuffs
* maybe null
* better maybe null
* Update docs/querying/segmentmetadataquery.md
* Update docs/querying/segmentmetadataquery.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* fix null right
* sad
* oops
* Update batch_hadoop_queries.json
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Support routing data through an HTTP proxy
* Support routing data through an HTTP proxy
This adds the ability for the HttpClient to connect through an HTTP proxy. We
augment the channel factory to check if it is supposed to be proxied and, if so,
we connect to the proxy host first, issue a CONNECT command through to the final
recipient host and *then* give the channel to the normal http client for usage.
* add docs
* address comments
Co-authored-by: imply-cheddar <86940447+imply-cheddar@users.noreply.github.com>
Enhanced the ExtractionNamespace interface in lookups-cached-global core extension with the ability to set a maxHeapPercentage for the cache of the respective namespace. The reason for adding this functionality, is make it easier to detect when a lookup table grows to a size that the underlying service cannot handle, because it does not have enough memory. The default value of maxHeap for the interface is -1, which indicates that no maxHeapPercentage has been set. For the JdbcExtractionNamespace and UriExtractionNamespace implementations, the default value is null, which will cause the respective service that the lookup is loaded in, to warn when its cache is beyond mxHeapPercentage of the service's configured max heap size. If a positive non-null value is set for the namespace's maxHeapPercentage config, this value will be honored for all services that the respective lookup is loaded onto, and consequently log warning messages when the cache of the respective lookup grows beyond this respective percentage of the services configured max heap size. Warnings are logged every time that either Uri based or Jdbc based lookups are regenerated, if the maxHeapPercentage constraint is violated. No other implementations will log warnings at this time. No error is thrown when the size exceeds the maxHeapPercentage at this time, as doing so could break functionality for existing users. Previously the JdbcCacheGenerator generated its cache by materializing all rows of the underling table in memory at once; this made it difficult to log warning messages in the case that the results from the jdbc query were very large and caused the service to run out of memory. To help with this, this pr makes it so that the jdbc query results are instead streamed through an iterator.
The new config is an extension of the concept of "watchedTiers" where
the Broker can choose to add the info of only the specified tiers to its timeline.
Similarly, with this config, Broker can choose to skip the realtime nodes and
thus it would query only Historical processes for any given segment.
Add support for hadoop 3 profiles . Most of the details are captured in #11791 .
We use a combination of maven profiles and resource filtering to achieve this. Hadoop2 is supported by default and a new maven profile with the name hadoop3 is created. This will allow the user to choose the profile which is best suited for the use case.
* Remove OffheapIncrementalIndex and clarify aggregator thread-safety needs.
This patch does the following:
- Removes OffheapIncrementalIndex.
- Clarifies that Aggregators are required to be thread safe.
- Clarifies that BufferAggregators and VectorAggregators are not
required to be thread safe.
- Removes thread safety code from some DataSketches aggregators that
had it. (Not all of them did, and that's OK, because it wasn't necessary
anyway.)
- Makes enabling "useOffheap" with groupBy v1 an error.
Rationale for removing the offheap incremental index:
- It is only used in one rare scenario: groupBy v1 (which is non-default)
in "useOffheap" mode (also non-default). So you have to go pretty deep
into the wilderness to get this code to activate in production. It is
never used during ingestion.
- Its existence complicates developer efforts to reason about how
aggregators get used, because the way it uses buffer aggregators is so
different from how every other query engine uses them.
- It doesn't have meaningful testing.
By the way, I do believe that the given way the offheap incremental index
works, it actually didn't require buffer aggregators to be thread-safe.
It synchronizes on "aggregate" and doesn't call "get" until it has
stopped calling "aggregate". Nevertheless, this is a bother to think about,
and for the above reasons I think it makes sense to remove the code anyway.
* Remove things that are now unused.
* Revert removal of getFloat, getLong, getDouble from BufferAggregator.
* OAK-related warnings, suppressions.
* Unused item suppressions.
* docker mem reqs
* Update docs/tutorials/docker.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
Co-authored-by: Sergio Ferragut <sergio.ferragut@imply.io>
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Add druid.sql.approxCountDistinct.function property.
The new property allows admins to configure the implementation for
APPROX_COUNT_DISTINCT and COUNT(DISTINCT expr) in approximate mode.
The motivation for adding this setting is to enable site admins to
switch the default HLL implementation to DataSketches.
For example, an admin can set:
druid.sql.approxCountDistinct.function = APPROX_COUNT_DISTINCT_DS_HLL
* Fixes
* Fix tests.
* Remove erroneous cannotVectorize.
* Remove unused import.
* Remove unused test imports.
* Revert "Require Datasource WRITE authorization for Supervisor and Task access (#11718)"
This reverts commit f2d6100124.
* Revert "Require DATASOURCE WRITE access in SupervisorResourceFilter and TaskResourceFilter (#11680)"
This reverts commit 6779c4652d.
* Fix docs for the reverted commits
* Fix and restore deleted tests
* Fix and restore SystemSchemaTest
Follow up PR for #11680
Description
Supervisor and Task APIs are related to ingestion and must always require Datasource WRITE
authorization even if they are purely informative.
Changes
Check Datasource WRITE in SystemSchema for tables "supervisors" and "tasks"
Check Datasource WRITE for APIs /supervisor/history and /supervisor/{id}/history
Check Datasource for all Indexing Task APIs
### Description
Today we ingest a number of high cardinality metrics into Druid across dimensions. These metrics are rolled up on a per minute basis, and are very useful when looking at metrics on a partition or client basis. Events is another class of data that provides useful information about a particular incident/scenario inside a Kafka cluster. Events themselves are carried inside kafka payload, but nonetheless there are some very useful metadata that is carried in kafka headers that can serve as useful dimension for aggregation and in turn bringing better insights.
PR(https://github.com/apache/druid/pull/10730) introduced support of Kafka headers in InputFormats.
We still need an input format to parse out the headers and translate those into relevant columns in Druid. Until that’s implemented, none of the information available in the Kafka message headers would be exposed. So first there is a need to write an input format that can parse headers in any given format(provided we support the format) like we parse payloads today. Apart from headers there is also some useful information present in the key portion of the kafka record. We also need a way to expose the data present in the key as druid columns. We need a generic way to express at configuration time what attributes from headers, key and payload need to be ingested into druid. We need to keep the design generic enough so that users can specify different parsers for headers, key and payload.
This PR is designed to solve the above by providing wrapper around any existing input formats and merging the data into a single unified Druid row.
Lets look at a sample input format from the above discussion
"inputFormat":
{
"type": "kafka", // New input format type
"headerLabelPrefix": "kafka.header.", // Label prefix for header columns, this will avoid collusions while merging columns
"recordTimestampLabelPrefix": "kafka.", // Kafka record's timestamp is made available in case payload does not carry timestamp
"headerFormat": // Header parser specifying that values are of type string
{
"type": "string"
},
"valueFormat": // Value parser from json parsing
{
"type": "json",
"flattenSpec": {
"useFieldDiscovery": true,
"fields": [...]
}
},
"keyFormat": // Key parser also from json parsing
{
"type": "json"
}
}
Since we have independent sections for header, key and payload, it will enable parsing each section with its own parser, eg., headers coming in as string and payload as json.
KafkaInputFormat will be the uber class extending inputFormat interface and will be responsible for creating individual parsers for header, key and payload, blend the data resolving conflicts in columns and generating a single unified InputRow for Druid ingestion.
"headerFormat" will allow users to plug parser type for the header values and will add default header prefix as "kafka.header."(can be overridden) for attributes to avoid collision while merging attributes with payload.
Kafka payload parser will be responsible for parsing the Value portion of the Kafka record. This is where most of the data will come from and we should be able to plugin existing parser. One thing to note here is that if batching is performed, then the code is augmenting header and key values to every record in the batch.
Kafka key parser will handle parsing Key portion of the Kafka record and will ingest the Key with dimension name as "kafka.key".
## KafkaInputFormat Class:
This is the class that orchestrates sending the consumerRecord to each parser, retrieve rows, merge the columns into one final row for Druid consumption. KafkaInputformat should make sure to release the resources that gets allocated as a part of reader in CloseableIterator<InputRow> during normal and exception cases.
During conflicts in dimension/metrics names, the code will prefer dimension names from payload and ignore the dimension either from headers/key. This is done so that existing input formats can be easily migrated to this new format without worrying about losing information.
* Add the ability to add a context to internally generated druid broker queries
* fix docs
* changes after first CI failure
* cleanup after merge with master
* change default to empty map and improve unit tests
* add doc info and fix checkstyle
* refactor DruidSchema#runSegmentMetadataQuery and add a unit test
The new config is an extension of the concept of "watchedTiers" where
the Broker can choose to add the info of only the specified tiers to its timeline.
Similarly, with this config, Broker can choose to ignore the segments being served
by the specified historical tiers. By default, no tier is ignored.
This config is useful when you want a completely isolated tier amongst many other tiers.
Say there are several tiers of historicals Tier T1, Tier T2 ... Tier Tn
and there are several brokers Broker B1, Broker B2 .... Broker Bm
If we want only Broker B1 to query Tier T1, instead of setting a long list of watchedTiers
on each of the other Brokers B2 ... Bm, we could just set druid.broker.segment.ignoredTiers=["T1"]
for these Brokers, while Broker B1 could have druid.broker.segment.watchedTiers=["T1"]
* update docs with X-Druid-SQL-Query-Id
* review comments
* update header description
* Update docs/querying/sql.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/querying/sql.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Rename field, fix router documentation
* Add more lines to doc
* Apply doc suggestions from code review
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Add handoff wait time to ingestion stats report. Refactor some code for batch handoff
* fix checkstyle
* Add assertion to AbstractITBatchIndexTask to make sure report reflects wait for segments happened
* add docs to the task reports section of doc
* Update sql.md
Added two example queries and adjusted formatting of one that was already there
* Update docs/querying/sql.md
Co-authored-by: Frank Chen <frankchen@apache.org>
* Update docs/querying/sql.md
Co-authored-by: Frank Chen <frankchen@apache.org>
* Update docs/querying/sql.md
Co-authored-by: Frank Chen <frankchen@apache.org>
* Update docs/querying/sql.md
Co-authored-by: Frank Chen <frankchen@apache.org>
* Update sql.md
Co-authored-by: Frank Chen <frankchen@apache.org>
* add MV_FILTER_ONLY SQL function, and list filter virtual column
* MV_FILTER_NONE and more tests
* formatting
* o yeah, forgot can do easy thing
* style
* hmm why was that there
* test filtering on virtual column
* style
* meh
* do it right
* good bot
* Update index.md
Moved H4s underneath the H3 for the task log location and added hyperlinks.
* Update tasks.md
Added process information around log file generation, and subsumed text from the configuration guide into this explanatory text instead.
* Update tasks.md
.html > .md
* Update docs/ingestion/tasks.md
Co-authored-by: Frank Chen <frankchen@apache.org>
Co-authored-by: Frank Chen <frankchen@apache.org>
* Update description of batchProcessingMode
Update the description to explicitly mention a released version of Druid that the original version was referencing
* Update docs/configuration/index.md
* Update docs/configuration/index.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update granularities.md
Link-back to the ingestion spec as well as Native queries plus examples.
* Update docs/querying/granularities.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/querying/granularities.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Make persists concurrent with ingestion
* Remove semaphore but keep concurrent persists (with add) and add push in the backround as well
* Go back to documented default persists (zero)
* Move to debug
* Remove unnecessary Atomics
* Comments on synchronization (or not) for sinks & sinkMetadata
* Some cleanup for unit tests but they still need further work
* Shutdown & wait for persists and push on close
* Provide support for three existing batch appenderators using batchProcessingMode flag
* Fix reference to wrong appenderator
* Fix doc typos
* Add BatchAppenderators class test coverage
* Add log message to batchProcessingMode final value, fix typo in enum name
* Another typo and minor fix to log message
* LEGACY->OPEN_SEGMENTS, Edit docs
* Minor update legacy->open segments log message
* More code comments, mostly small adjustments to naming etc
* fix spelling
* Exclude BtachAppenderators from Jacoco since it is fully tested but Jacoco still refuses to ack coverage
* Coverage for Appenderators & BatchAppenderators, name change of a method that was still using "legacy" rather than "openSegments"
Co-authored-by: Clint Wylie <cjwylie@gmail.com>
* Configurable maxStreamLength for doubles sketches
* fix equals/hashcode and it test failure
* fix test
* fix it test
* benchmark
* doc
* grouping key
* fix comment
* dependency check
* Update docs/development/extensions-core/datasketches-quantiles.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/querying/sql.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/querying/sql.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/querying/sql.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/querying/sql.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/querying/sql.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/querying/sql.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/querying/sql.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
LGTM
* Update native-batch.md
Knowledge from https://the-asf.slack.com/archives/CJ8D1JTB8/p1595434977062400
* Update native-batch.md
* Fixed broken link + some grammar
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <38529548+techdocsmith@users.noreply.github.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <38529548+techdocsmith@users.noreply.github.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <38529548+techdocsmith@users.noreply.github.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <38529548+techdocsmith@users.noreply.github.com>
* Update native-batch.md
Some grammatical wizardry.
* Update native-batch.md
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/ingestion/native-batch.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Apply suggestions from code review
remove orphaned links
Co-authored-by: Charles Smith <38529548+techdocsmith@users.noreply.github.com>
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Add details to the Docker tutorial
Added links, explanations and other details to the Docker
tutorial to make it easier for first-time users.
* Fix spelling error
And add "Jupyter" to the spelling dictionary.
* Update docs/tutorials/docker.md
* Update docs/tutorials/docker.md
Co-authored-by: sthetland <steve.hetland@imply.io>
* Update docs/tutorials/docker.md
Co-authored-by: sthetland <steve.hetland@imply.io>
* Update docs/tutorials/docker.md
* Update docs/tutorials/docker.md
Co-authored-by: sthetland <steve.hetland@imply.io>
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
Co-authored-by: sthetland <steve.hetland@imply.io>
* Add prometheus-emitter docs
* Update docs/development/extensions.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Affinity "strong" definition
Reworded "strong" to emphasise meaning and consequences - OTBO https://the-asf.slack.com/archives/CJ8D1JTB8/p1609558156092800
* Spelling corrections
* Update docs/configuration/index.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/configuration/index.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
This change updates doc to clarify when and how a change to druid.auth.authenticator.basic.credentialIterations takes effect: changes apply only to new users or existing users upon changing their password via the credentials API, which may not be the expectation.
Fixes#11297.
Description
Description and design in the proposal #11297
Key changed/added classes in this PR
*DataSegmentPusher
*ShuffleClient
*PartitionStat
*PartitionLocation
*IntermediaryDataManager
* add binary_byte_format/decimal_byte_format/decimal_format
* clean code
* fix doc
* fix review comments
* add spelling check rules
* remove extra param
* improve type handling and null handling
* remove extra zeros
* fix tests and add space between unit suffix and number as most size-format functions do
* fix tests
* add examples
* change function names according to review comments
* fix merge
Signed-off-by: frank chen <frank.chen021@outlook.com>
* no need to configure NullHandling explicitly for tests
Signed-off-by: frank chen <frank.chen021@outlook.com>
* fix tests in SQL-Compatible mode
Signed-off-by: frank chen <frank.chen021@outlook.com>
* Resolve review comments
* Update SQL test case to check null handling
* Fix intellij inspections
* Add more examples
* Fix example
This PR adds a new property druid.router.sql.enable which allows the
Router to handle SQL queries when set to true.
This change does not affect Avatica JDBC requests and they are still routed
by hashing the Connection ID.
To allow parsing of the request object as a SqlQuery (contained in module druid-sql),
some classes have been moved from druid-server to druid-services with
the same package name.
* fix little typo
* Update docs/misc/math-expr.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update default maxSegmentsInNodeLoadingQueue
Update the default maxSegmentsInNodeLoadingQueue from 0 (unbounded) to 100.
An unbounded maxSegmentsInNodeLoadingQueue can cause cluster instability.
Since this is the default druid operators need to run into this instability
and then look through the docs to see that the recommended value for a large
cluster is 1000. This change makes it so the default will prevent clusters
from falling over as they grow over time.
* update tests
* codestyle
* Add a note
* Update docs/configuration/index.md
Co-authored-by: sthetland <steve.hetland@imply.io>
* clarify that both of non-result level cache and result level cache are not supported
Co-authored-by: sthetland <steve.hetland@imply.io>
* Allow kill task to mark segments as unused
* Add IndexerSQLMetadataStorageCoordinator test
* Update docs/ingestion/data-management.md
Co-authored-by: Jihoon Son <jihoonson@apache.org>
* Add warning to kill task doc
Co-authored-by: Jihoon Son <jihoonson@apache.org>
This change allows the selection of a specific broker service (or broker tier) by the Router.
The newly added ManualTieredBrokerSelectorStrategy works as follows:
Check for the parameter brokerService in the query context. If this is a valid broker service, use it.
Check if the field defaultManualBrokerService has been set in the strategy. If this is a valid broker service, use it.
Move on to the next strategy
Rohan Garg
Clint Wylie
Ian Roberts
Peter Marshall
Lucas Capistrant
David Palmer
絵空事スピリット
Hamish Ball
David Hergenroeder
Suneet Saldanha
Gian Merlino
AmatyaAvadhanula
Katya Macedo
317brian
Charles Smith
Atul Mohan
Victoria Lim
Jianhuan Liu
Frank Chen
zachjsh
TSFenwick
Jill Osborne
Rui Chen
Didip Kerabat
Tejaswini Bandlamudi
Dr. Sizzles
Agustin Gonzalez
Hellmar Becker
Kashif Faraz
Rocky Chen
Gian Merlino
Peter Marshall
Apoorv Gupta
jacobtolar
Alexandre BERTHIOT
Maytas Monsereenusorn
Parag Jain
mark-imply
AmatyaAvadhanula
somu-imply
Adarsh Sanjeev
Frank Chen
Sandeep
Jihoon Son
Karan Kumar
Jonathan Wei
Vadim Ogievetsky
shallada
benkrug
Laksh Singla
jacobtolar
Nikhil Navadiya
sthetland
Jian Wang
Sergio Ferragut
Arun Ramani
lokesh-lingarajan
Caroline1000
Vaibhav
zhangyue19921010
Paul Rogers
Jeet Patel
Daegi Kim
Arvin.Z
imply-jhan
Charles Smith
Yi Yuan
Harini Rajendran
Yuanli Han