The defaults of the following config values in the `CoordinatorDynamicConfig` are being updated.
1. `maxSegmentsInNodeLoadingQueue = 500` (previous = 100)
2. `replicationThrottleLimit = 500` (previous = 10)
Rationale: With round-robin segment assignment now being the default assignment technique,
the Coordinator can assign a large number of under-replicated/unavailable segments very quickly,
without getting stuck in `RunRules` duty due to very slow strategy-based cost computations.
3. `maxSegmentsToMove = 100` (previous = 5)
Rationale: A very low value (say 5) is ineffective in balancing especially if there are many segments
to balance. A very large value can cause excessive moves, which has these disadvantages:
- Load of moving segments competing with load of unavailable/under-replicated segments
- Unnecessary network costs due to constant download and delete of segments
These defaults will be revisited after #13197 is merged.
This PR adds a new interface to control how SegmentMetadataCache chooses ColumnType when faced with differences between segments for SQL schemas which are computed, exposed as druid.sql.planner.metadataColumnTypeMergePolicy and adds a new 'least restrictive type' mode to allow choosing the type that data across all segments can best be coerced into and sets this as the default behavior.
This is a behavior change around when segment driven schema migrations take effect for the SQL schema. With latestInterval, the SQL schema will be updated as soon as the first job with the new schema has published segments, while using leastRestrictive, the schema will only be updated once all segments are reindexed to the new type. The benefit of leastRestrictive is that it eliminates a bunch of type coercion errors that can happen in SQL when types are varied across segments with latestInterval because the newest type is not able to correctly represent older data, such as if the segments have a mix of ARRAY and number types, or any other combinations that lead to odd query plans.
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
Co-authored-by: Victoria Lim <vtlim@users.noreply.github.com>
Co-authored-by: Victoria Lim <lim.t.victoria@gmail.com>
* Be able to load segments on Peons
This change introduces a new config on WorkerConfig
that indicates how many bytes of each storage
location to use for storage of a task. Said config
is divided up amongst the locations and slots
and then used to set TaskConfig.tmpStorageBytesPerTask
The Peons use their local task dir and
tmpStorageBytesPerTask as their StorageLocations for
the SegmentManager such that they can accept broadcast
segments.
* Make LoggingEmitter more useful
* Skip code coverage for facade classes
* fix spellcheck
* code review
* fix dependency
* logging.md
* fix checkstyle
* Add back jacoco version to main pom
* Allow for Log4J to be configured for peons but still ensure console logging is enforced
This change will allow for log4j to be configured for peons but require console logging is still
configured for them to ensure peon logs are saved to deep storage.
Also fixed the test ConsoleLoggingEnforcementTest to use a valid appender for the non console
Config as the previous config was incorrect and would never return a logger.
* fix checkstyle
* add warning to logger when it overwrites all loggers to be console
* optimize calls for altering logging config for ConsoleLoggingEnforcementConfigurationFactory
add getName to the druid logger class
* update docs, and error message
* edit docs to be more clear
* fix checkstyle issues
* CI fixes - LoggerTest code coverage and fix spelling issue for logging docs
*
Adds new run time parameter druid.indexer.task.tmpStorageBytesPerTask. This sets a limit for the amount of temporary storage disk space used by tasks. This limit is currently only respected by MSQ tasks.
* Removes query context parameters intermediateSuperSorterStorageMaxLocalBytes and composedIntermediateSuperSorterStorageEnabled. Composed intermediate super sorter (which was enabled by composedIntermediateSuperSorterStorageEnabled) is now enabled automatically if durableShuffleStorage is set to true. intermediateSuperSorterStorageMaxLocalBytes is calculated from the limit set by the run time parameter druid.indexer.task.tmpStorageBytesPerTask.
* Make the tasks run with only a single directory
There was a change that tried to get indexing to run on multiple disks
It made a bunch of changes to how tasks run, effectively hiding the
"safe" directory for tasks to write files into from the task code itself
making it extremely difficult to do anything correctly inside of a task.
This change reverts those changes inside of the tasks and makes it so that
only the task runners are the ones that make decisions about which
mount points should be used for storing task-related files.
It adds the config druid.worker.baseTaskDirs which can be used by the
task runners to know which directories they should schedule tasks inside of.
The TaskConfig remains the authoritative source of configuration for where
and how an individual task should be operating.
The FiniteFirehoseFactory and InputRowParser classes were deprecated in 0.17.0 (#8823) in favor of InputSource & InputFormat. This PR removes the FiniteFirehoseFactory and all its implementations along with classes solely used by them like Fetcher (Used by PrefetchableTextFilesFirehoseFactory). Refactors classes including tests using FiniteFirehoseFactory to use InputSource instead.
Removing InputRowParser may not be as trivial as many classes that aren't deprecated depends on it (with no alternatives), like EventReceiverFirehoseFactory. Hence FirehoseFactory, EventReceiverFirehoseFactory, and Firehose are marked deprecated.
### Description
This change adds a new config property `druid.sql.planner.operatorConversion.denyList`, which allows a user to specify
any operator conversions that they wish to disallow. A user may want to do this for a number of reasons, including security concerns. The default value of this property is the empty list `[]`, which does not disallow any operator conversions.
An example usage of this property is `druid.sql.planner.operatorConversion.denyList=["extern"]`, which disallows the usage of the `extern` operator conversion. If the property is configured this way, and a user of the Druid cluster tries to submit a query that uses the `extern` function, such as the example given [here](https://druid.apache.org/docs/latest/multi-stage-query/examples.html#insert-with-no-rollup), a response with http response code `400` is returned with en error body similar to the following:
```
{
"taskId": "4ec5b0b6-fa9b-4c3a-827d-2308294e9985",
"state": "FAILED",
"error": {
"error": "Plan validation failed",
"errorMessage": "org.apache.calcite.runtime.CalciteContextException: From line 28, column 5 to line 32, column 5: No match found for function signature EXTERN(<CHARACTER>, <CHARACTER>, <CHARACTER>)",
"errorClass": "org.apache.calcite.tools.ValidationException",
"host": null
}
}
```
* Fix lookup docs
* Fix spelling
* Apply suggestions from code review
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
---------
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
Changes:
- Limit max batch size in `SegmentAllocationQueue` to 500
- Rename `batchAllocationMaxWaitTime` to `batchAllocationWaitTime` since the actual
wait time may exceed this configured value.
- Replace usage of `SegmentInsertAction` in `TaskToolbox` with `SegmentTransactionalInsertAction`
* Switching emitter. This will allow for a per feed emitter designation.
This will work by looking at an event's feed and direct it to a specific emitter. If no specific feed is specified for a feed.
The emitter can direct the event to a default emitter.
* fix checkstyle issues and make docs for switching emitter use basic event feeds
* fix broken docs, add test, and guard against misconfigurations
* add module test
add switching emitter module test
* fix broken SwitchingEmitterModuleTest
* add apache license to top of test
* fix checkstyle issues
* address comments by adding javadocs, removing a todo, and making druid docs more clear
Async reads for JDBC:
Prevents JDBC timeouts on long queries by returning empty batches
when a batch fetch takes too long. Uses an async model to run the
result fetch concurrently with JDBC requests.
Fixed race condition in Druid's Avatica server-side handler
Fixed issue with no-user connections
Druid currently uses Zookeeper dependent options as the default.
This commit updates the following to use HTTP as the default instead.
- task runner. `druid.indexer.runner.type=remote -> httpRemote`
- load queue peon. `druid.coordinator.loadqueuepeon.type=curator -> http`
- server inventory view. `druid.serverview.type=curator -> http`
* update log4j example
* fix some style issues
* Update docs/configuration/logging.md
Co-authored-by: Frank Chen <frankchen@apache.org>
Co-authored-by: Frank Chen <frankchen@apache.org>
* Various documentation updates.
1) Split out "data management" from "ingestion". Break it into thematic pages.
2) Move "SQL-based ingestion" into the Ingestion category. Adjust content so
all conceptual content is in concepts.md and all syntax content is in reference.md.
Shorten the known issues page to the most interesting ones.
3) Add SQL-based ingestion to the ingestion method comparison page. Remove the
index task, since index_parallel is just as good when maxNumConcurrentSubTasks: 1.
4) Rename various mentions of "Druid console" to "web console".
5) Add additional information to ingestion/partitioning.md.
6) Remove a mention of Tranquility.
7) Remove a note about upgrading to Druid 0.10.1.
8) Remove no-longer-relevant task types from ingestion/tasks.md.
9) Move ingestion/native-batch-firehose.md to the hidden section. It was previously deprecated.
10) Move ingestion/native-batch-simple-task.md to the hidden section. It is still linked in some
places, but it isn't very useful compared to index_parallel, so it shouldn't take up space
in the sidebar.
11) Make all br tags self-closing.
12) Certain other cosmetic changes.
13) Update to node-sass 7.
* make travis use node12 for docs
Co-authored-by: Vadim Ogievetsky <vadim@ogievetsky.com>
* remove things that do not apply
* fix more things
* pin node to a working version
* fix
* fixes
* known issues tidy up
* revert auto formatting changes
* remove management-uis page which is 100% lies
* don't mention the Coordinator console (that no longer exits)
* goodies
* fix typo
* Add interpolation to JsonConfigurator
* Fix checkstyle
* Fix tests by removing common-text override
* Add back commons-text without version
* Remove unused hadoopDir configs
* Move some stuff to hopefully pass coverage
* apache#12063 Ease of hidding sensitive properties from /status/properties endpoint
* apache#12063 Ease of hidding sensitive properties from /status/properties endpoint
* apache#12063 Ease of hidding sensitive properties from /status/properties endpoint
using one property for hiding properties, updated the index.md to document hiddenProperties
* apache#12063 Ease of hidding sensitive properties from /status/properties endpoint
Added java docs
* apache#12063 Ease of hidding sensitive properties from /status/properties endpoint
Add "password", "key", "token", "pwd" as default druid.server.hiddenProperties
fixed typo and removed redundant space
Co-authored-by: zemin <zemin.piao@adyen.com>
* Introduce defaultOnDiskStorage config for groupBy
* add debug log to groupby query config
* Apply config change suggestion from review
* Remove accidental new lines
* update default value of new default disk storage config
* update debug log to have more descriptive text
* Make maxOnDiskStorage and defaultOnDiskStorage HumanRedadableBytes
* improve test coverage
* Provide default implementation to new default method on advice of reviewer
* Improved Java 17 support and Java runtime docs.
1) Add a "Java runtime" doc page with information about supported
Java versions, garbage collection, and strong encapsulation..
2) Update asm and equalsverifier to versions that support Java 17.
3) Add additional "--add-opens" lines to surefire configuration, so
tests can pass successfully under Java 17.
4) Switch openjdk15 tests to openjdk17.
5) Update FrameFile to specifically mention Java runtime incompatibility
as the cause of not being able to use Memory.map.
6) Update SegmentLoadDropHandler to log an error for Errors too, not
just Exceptions. This is important because an IllegalAccessError is
encountered when the correct "--add-opens" line is not provided,
which would otherwise be silently ignored.
7) Update example configs to use druid.indexer.runner.javaOptsArray
instead of druid.indexer.runner.javaOpts. (The latter is deprecated.)
* Adjustments.
* Use run-java in more places.
* Add run-java.
* Update .gitignore.
* Exclude hadoop-client-api.
Brought in when building on Java 17.
* Swap one more usage of java.
* Fix the run-java script.
* Fix flag.
* Include link to Temurin.
* Spelling.
* Update examples/bin/run-java
Co-authored-by: Xavier Léauté <xl+github@xvrl.net>
Co-authored-by: Xavier Léauté <xl+github@xvrl.net>
* Use nonzero default value of maxQueuedBytes.
The purpose of this parameter is to prevent the Broker from running out
of memory. The prior default is unlimited; this patch changes it to a
relatively conservative 25MB.
This may be too low for larger clusters. The risk is that throughput
can decrease for queries with large resultsets or large amounts of intermediate
data. However, I think this is better than the risk of the prior default, which
is that these queries can cause the Broker to go OOM.
* Alter calculation.
* initial commit of bucket dimensions for metrics
return counts of segments that have rowcount in a bucket size for a datasource
return average value of rowcount per segment in a datasource
added unit test
naming could use a lot of work
buckets right now are not finalized
added javadocs
altered metrics.md
* fix checkstyle issues
* addressed review comments
add monitor test
move added functionality to new monitor
update docs
* address comments
renamed monitor
handle tombstones better
update docs
added javadocs
* Add support for tombstones in the segment distribution
* undo changes to tombstone segmentizer factory
* fix accidental whitespacing changes
* address comments regarding metrics documentation
and rename variable to be more accurate
* fix tests
* fix checkstyle issues
* fix broken test
* undo removal of timeout
* Add TIME_IN_INTERVAL SQL operator.
The operator is implemented as a convertlet rather than an
OperatorConversion, because this allows it to be equivalent to using
the >= and < operators directly.
* SqlParserPos cannot be null here.
* Remove unused import.
* Doc updates.
* Add words to dictionary.
* Service stdout log files, move logs to log/.
Two changes that make log behavior cleaner:
1) Redirect messages from the Java runtime to their own log files.
Otherwise, they would get jumbled up in the output of the all-in-one
start command.
2) Use log/ instead of bin/log/ for the default log directory. Makes them
easier to find.
Additionally, add documentation about how to avoid the reflective
access warnings in Java 11.
* Spelling.
* See if code formatting affects spelling.
* docs(fix): clarify how worker.version and minWorkerVersion comparison works
* Revert "docs(fix): clarify how worker.version and minWorkerVersion comparison works"
This reverts commit cadd1fdc60.
* docs(fix): clarify how worker.version and minWorkerVersion comparison works
* Apply suggestions from code review
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/configuration/index.md
fix spelling
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
Currently all Druid processes share the same log4j2 configuration file located in _common directory. Since peon processes are spawned by middle manager process, they derivate the environment variables from the middle manager. These variables include those in the log4j2.xml controlling to which file the logger writes the log.
But current task logging mechanism requires the peon processes to output the log to console so that the middle manager can redirect the console output to a file and upload this file to task log storage.
So, this PR imposes this requirement to peon processes, whatever the configuration is in the shared log4j2.xml, peon processes always write the log to console.
Allow a Druid cluster to kill segments whose interval_end is a date in the future. This can be done by setting druid.coordinator.kill.durationToRetain to a negative period. For example PT-24H would allow segments to be killed if their interval_end date was 24 hours or less into the future at the time that the kill task is generated by the system.
A cluster operator can also disregard the druid.coordinator.kill.durationToRetain entirely by setting a new configuration, druid.coordinator.kill.ignoreDurationToRetain=true. This ignores interval_end date when looking for segments to kill, and instead is capable of killing any segment marked unused. This new configuration is off by default, and a cluster operator should fully understand and accept the risks if they enable it.
* Optionally load segment index files into page cache on bootstrap and new segment download
* Fix unit test failure
* Fix test case
* fix spelling
* fix spelling
* fix test and test coverage issues
Co-authored-by: Jian Wang <wjhypo@gmail.com>
The current default value of inputSegmentSizeBytes is 400MB, which is pretty
low for most compaction use cases. Thus most users are forced to override the
default.
The default value is now increased to Long.MAX_VALUE.
* Counting nulls in String cardinality with a config
* Adding tests for the new config
* Wrapping the vectorize part to allow backward compatibility
* Adding different tests, cleaning the code and putting the check at the proper position, handling hasRow() and hasValue() changes
* Updating testcase and code
* Adding null handling test to improve coverage
* Checkstyle fix
* Adding 1 more change in docs
* Making docs clearer
* add docs for request logging
* remove stray character
* Update docs/operations/request-logging.md
Co-authored-by: TSFenwick <tsfenwick@gmail.com>
* Apply suggestions from code review
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
Co-authored-by: TSFenwick <tsfenwick@gmail.com>
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
Add config for eager / lazy connection initialization in ResourcePool
Description
Currently, when multiple tasks are launched, each of them eagerly initializes a full pool's worth of connections to the coordinator.
While this is acceptable when the parameter for number of eagerConnections (== maxSize) is small, this can be problematic in environments where it's a large value (say 1000) and multiple tasks are launched simultaneously, which can cause a large number of connections to be created to the coordinator, thereby overwhelming it.
Patch
Nodes like the broker may require eager initialization of resources and do not create connections with the Coordinator.
It is unnecessary to do this with other types of nodes.
A config parameter eagerInitialization is added, which when set to true, initializes the max permissible connections when ResourcePool is initialized.
If set to false, lazy initialization of connection resources takes place.
NOTE: All nodes except the broker have this new parameter set to false in the quickstart as part of this PR
Algorithm
The current implementation relies on the creation of maxSize resources eagerly.
The new implementation's behaviour is as follows:
If a resource has been previously created and is available, lend it.
Else if the number of created resources is less than the allowed parameter, create and lend it.
Else, wait for one of the lent resources to be returned.
* Tombstone support for replace functionality
* A used segment interval is the interval of a current used segment that overlaps any of the input intervals for the spec
* Update compaction test to match replace behavior
* Adapt ITAutoCompactionTest to work with tombstones rather than dropping segments. Add support for tombstones in the broker.
* Style plus simple queriableindex test
* Add segment cache loader tombstone test
* Add more tests
* Add a method to the LogicalSegment to test whether it has any data
* Test filter with some empty logical segments
* Refactor more compaction/dropexisting tests
* Code coverage
* Support for all empty segments
* Skip tombstones when looking-up broker's timeline. Discard changes made to tool chest to avoid empty segments since they will no longer have empty segments after lookup because we are skipping over them.
* Fix null ptr when segment does not have a queriable index
* Add support for empty replace interval (all input data has been filtered out)
* Fixed coverage & style
* Find tombstone versions from lock versions
* Test failures & style
* Interner was making this fail since the two segments were consider equal due to their id's being equal
* Cleanup tombstone version code
* Force timeChunkLock whenever replace (i.e. dropExisting=true) is being used
* Reject replace spec when input intervals are empty
* Documentation
* Style and unit test
* Restore test code deleted by mistake
* Allocate forces TIME_CHUNK locking and uses lock versions. TombstoneShardSpec added.
* Unused imports. Dead code. Test coverage.
* Coverage.
* Prevent killer from throwing an exception for tombstones. This is the killer used in the peon for killing segments.
* Fix OmniKiller + more test coverage.
* Tombstones are now marked using a shard spec
* Drop a segment factory.json in the segment cache for tombstones
* Style
* Style + coverage
* style
* Add TombstoneLoadSpec.class to mapper in test
* Update core/src/main/java/org/apache/druid/segment/loading/TombstoneLoadSpec.java
Typo
Co-authored-by: Jonathan Wei <jon-wei@users.noreply.github.com>
* Update docs/configuration/index.md
Missing
Co-authored-by: Jonathan Wei <jon-wei@users.noreply.github.com>
* Typo
* Integrated replace with an existing test since the replace part was redundant and more importantly, the test file was very close or exceeding the 10 min default "no output" CI Travis threshold.
* Range does not work with multi-dim
Co-authored-by: Jonathan Wei <jon-wei@users.noreply.github.com>
* GroupBy: Cap dictionary-building selector memory usage.
New context parameter "maxSelectorDictionarySize" controls when the
per-segment processing code should return early and trigger a trip
to the merge buffer.
Includes:
- Vectorized and nonvectorized implementations.
- Adjustments to GroupByQueryRunnerTest to exercise this code in
the v2SmallDictionary suite. (Both the selector dictionary and
the merging dictionary will be small in that suite.)
- Tests for the new config parameter.
* Fix issues from tests.
* Add "pre-existing" to dictionary.
* Simplify GroupByColumnSelectorStrategy interface by removing one of the writeToKeyBuffer methods.
* Adjustments from review comments.
* Moving in filter check to broker
* Adding more unit tests, making error message meaningful
* Spelling and doc changes
* Updating default to -1 and making this feature hide by default. The number of IN filters can grow upto a max limit of 100
* Removing upper limit of 100, updated docs
* Making documentation more meaningful
* Moving check outside to PlannerConfig, updating test cases and adding back max limit
* Updated with some additional code comments
* Missed removing one line during the checkin
* Addressing doc changes and one forbidden API correction
* Final doc change
* Adding a speling exception, correcting a testcase
* Reading entire filter tree to address combinations of ANDs and ORs
* Specifying in docs that, this case works only for ORs
* Revert "Reading entire filter tree to address combinations of ANDs and ORs"
This reverts commit 81ca8f8496.
* Covering a class cast exception and updating docs
* Counting changed
Co-authored-by: Jihoon Son <jihoonson@apache.org>
In extreme cases where many parallel indexing jobs are submitted together, it is possible
that the `ParallelIndexSupervisorTasks` take up all slots leaving no slot to schedule
their own sub-tasks thus stalling progress of all the indexing jobs.
Key changes:
- Add config `druid.indexer.runner.parallelIndexTaskSlotRatio` to limit the task slots
for `ParallelIndexSupervisorTasks` per worker
- `ratio = 1` implies supervisor tasks can use all slots on a worker if needed (default behavior)
- `ratio = 0` implies supervisor tasks can not use any slot on a worker
(actually, at least 1 slot is always available to ensure progress of parallel indexing jobs)
- `ImmutableWorkerInfo.canRunTask()`
- `WorkerHolder`, `ZkWorker`, `WorkerSelectUtils`
* refactor and link fixes
* add sql docs to left nav
* code format for needle
* updated web console script
* link fixes
* update earliest/latest functions
* edits for grammar and style
* more link fixes
* another link
* update with #12226
* update .spelling file
* Thread pool for broker
* Updating two tests to improve coverage for new method added
* Updating druidProcessingConfigTest to cover coverage
* Adding missed spelling errors caused in doc
* Adding test to cover lines of new function added
* clean up the balancing code around the batched vs deprecated way of sampling segments to balance
* fix docs, clarify comments, add deprecated annotations to legacy code
* remove unused variable
* update dynamic config dialog in console to state percentOfSegmentsToConsiderPerMove deprecated
* fix dynamic config text for percentOfSegmentsToConsiderPerMove
* run prettier to cleanup coordinator-dynamic-config.tsx changes
* update jest snapshot
* update documentation per review feedback
* Metrics docs layout and info about query/bytes
Knowledge transfer from https://groups.google.com/g/druid-user/c/8fiflmSEoTQ - updated the layout of the Metrics part, adding links between docs pages.
Update index.md
Amended typo
* Update docs/configuration/index.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/configuration/index.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/operations/metrics.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/operations/metrics.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/operations/metrics.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Feedback applied
Http --> HTTP and moved content / removed >
* Update docs/configuration/index.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* Update docs/configuration/index.md
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
Co-authored-by: Charles Smith <techdocsmith@gmail.com>
* apply log file rolling strategy
* fix doc
Signed-off-by: frank chen <frank.chen021@outlook.com>
* Use absolute log path and allow spaces in log path
* Update log4j2 configuration
* apply FileAppender to ZooKeeper
* DO NOT redirect application's console log to file in supervisor
changes:
* adds new config, druid.expressions.useStrictBooleans which make longs the official boolean type of all expressions
* vectorize logical operators and boolean functions, some only if useStrictBooleans is true
Currently, when we try to do EXPLAIN PLAN FOR, it returns the structure of the SQL parsed (via Calcite's internal planner util), which is verbose (since it tries to explain about the nodes in the SQL, instead of the Druid Query), and not representative of the native Druid query which will get executed on the broker side.
This PR aims to change the format when user tries to EXPLAIN PLAN FOR for queries which are executed by converting them into Druid's native queries (i.e. not sys schemas).
* add impl
* fix checkstyle
* add test
* add test
* add unit tests
* fix unit tests
* fix unit tests
* fix unit tests
* add IT
* add IT
* add comments
* fix spelling
* Use a simple class to sanitize sanitizable errors and log them
The purpose of this is to sanitize JDBC errors, but can sanitize other errors
if they implement SanitizableError Interface
add a class to log errors and sanitize them
added a simple test that tests out that the error gets sanitized
add @NonNull annotation to serverconfig's ErrorResponseTransfromStrategy
* return less information as part of too many connections, and instead only log specific details
This is so an end user gets relevant information but not too much info since they might now how
many brokers they have
* return only runtime exceptions
added new error types that need to be sanitized
also sanitize deprecated and unsupported exceptions.
* dont reqrewite exceptions unless necessary for checked exceptions
add docs
avoid blanket turning all exceptions into runtime exceptions
* address comments, to fix up docs.
add more javadocs
add support UOE sanitization
* use try catch instead and sanitize at public methods
* checkstyle fixes
* throw noSuchStatement and NoSuchConnection as Avatica is affected by those
* address comments. move log error back to druid meta
clean up bad formatting and commented code. add missed catch for NoSuchStatementException
clean up comments for error handler and add comment explainging not wanting to santize avatica exceptions
* alter test to reflect new error message
The new config is an extension of the concept of "watchedTiers" where
the Broker can choose to add the info of only the specified tiers to its timeline.
Similarly, with this config, Broker can choose to skip the realtime nodes and
thus it would query only Historical processes for any given segment.
* Remove OffheapIncrementalIndex and clarify aggregator thread-safety needs.
This patch does the following:
- Removes OffheapIncrementalIndex.
- Clarifies that Aggregators are required to be thread safe.
- Clarifies that BufferAggregators and VectorAggregators are not
required to be thread safe.
- Removes thread safety code from some DataSketches aggregators that
had it. (Not all of them did, and that's OK, because it wasn't necessary
anyway.)
- Makes enabling "useOffheap" with groupBy v1 an error.
Rationale for removing the offheap incremental index:
- It is only used in one rare scenario: groupBy v1 (which is non-default)
in "useOffheap" mode (also non-default). So you have to go pretty deep
into the wilderness to get this code to activate in production. It is
never used during ingestion.
- Its existence complicates developer efforts to reason about how
aggregators get used, because the way it uses buffer aggregators is so
different from how every other query engine uses them.
- It doesn't have meaningful testing.
By the way, I do believe that the given way the offheap incremental index
works, it actually didn't require buffer aggregators to be thread-safe.
It synchronizes on "aggregate" and doesn't call "get" until it has
stopped calling "aggregate". Nevertheless, this is a bother to think about,
and for the above reasons I think it makes sense to remove the code anyway.
* Remove things that are now unused.
* Revert removal of getFloat, getLong, getDouble from BufferAggregator.
* OAK-related warnings, suppressions.
* Unused item suppressions.
* Add druid.sql.approxCountDistinct.function property.
The new property allows admins to configure the implementation for
APPROX_COUNT_DISTINCT and COUNT(DISTINCT expr) in approximate mode.
The motivation for adding this setting is to enable site admins to
switch the default HLL implementation to DataSketches.
For example, an admin can set:
druid.sql.approxCountDistinct.function = APPROX_COUNT_DISTINCT_DS_HLL
* Fixes
* Fix tests.
* Remove erroneous cannotVectorize.
* Remove unused import.
* Remove unused test imports.
* Add the ability to add a context to internally generated druid broker queries
* fix docs
* changes after first CI failure
* cleanup after merge with master
* change default to empty map and improve unit tests
* add doc info and fix checkstyle
* refactor DruidSchema#runSegmentMetadataQuery and add a unit test
The new config is an extension of the concept of "watchedTiers" where
the Broker can choose to add the info of only the specified tiers to its timeline.
Similarly, with this config, Broker can choose to ignore the segments being served
by the specified historical tiers. By default, no tier is ignored.
This config is useful when you want a completely isolated tier amongst many other tiers.
Say there are several tiers of historicals Tier T1, Tier T2 ... Tier Tn
and there are several brokers Broker B1, Broker B2 .... Broker Bm
If we want only Broker B1 to query Tier T1, instead of setting a long list of watchedTiers
on each of the other Brokers B2 ... Bm, we could just set druid.broker.segment.ignoredTiers=["T1"]
for these Brokers, while Broker B1 could have druid.broker.segment.watchedTiers=["T1"]
Kashif Faraz
Clint Wylie
Nhi Pham
Katya Macedo
317brian
imply-cheddar
Suneet Saldanha
TSFenwick
Adarsh Sanjeev
Vadim Ogievetsky
Tejaswini Bandlamudi
Victoria Lim
zachjsh
AmatyaAvadhanula
Abhishek Agarwal
Jill Osborne
Paul Rogers
Charles Smith
Gian Merlino
Adam Peck
zemin
Adam Peck
Karan Kumar
Rohan Garg
Lucas Capistrant
Atul Mohan
Rui Chen
Frank Chen
Maytas Monsereenusorn
Parag Jain
mark-imply
somu-imply
Dr. Sizzles
AmatyaAvadhanula
Agustin Gonzalez
Gian Merlino
Peter Marshall
Frank Chen
Laksh Singla
Arun Ramani
Caroline1000