The initial step in optimizing segment metadata was to centralize the construction of datasource schema in the Coordinator (#14985). Subsequently, our goal is to eliminate the requirement for regularly executing queries to obtain segment schema information. This task encompasses addressing both realtime and finalized segments.
This modification specifically addresses the issue with realtime segments. Tasks will now routinely communicate the schema for realtime segments during the segment announcement process. The Coordinator will identify the schema alongside the segment announcement and subsequently update the schema for realtime segments in the metadata cache.
Database slowness while doing audits seems to be causing flakiness in auth ITs.
The failing test is almost always
`ITBasicAuthConfigurationTest.test_avaticaQuery_datasourceAndContextParamsUser`
but in some rare cases, other tests fail too. Alternately, this failing test has been seen to pass too.
It is most likely because the auth changes are not able to propagate in time from
the coordinator to other services.
Fix: Just log the audits rather than persisting them to database.
Most audits have been newly added and it is okay to not have them persisted.
Moreover, logging audits can also be more beneficial while debugging an IT.
Lately, Query IT has been failing due to historical server running out of memory (OOM).
We are investigating the historical heap dump from the test. Until the issue is resolved, we are increasing the heap size of historical server.
Historical OOMs were not getting dumped into /shared/logs because common JVM flags will override service-specific JVM flags. This PR fixes that and also removes unnecessary overrides in historical.
In the current design, brokers query both data nodes and tasks to fetch the schema of the segments they serve. The table schema is then constructed by combining the schemas of all segments within a datasource. However, this approach leads to a high number of segment metadata queries during broker startup, resulting in slow startup times and various issues outlined in the design proposal.
To address these challenges, we propose centralizing the table schema management process within the coordinator. This change is the first step in that direction. In the new arrangement, the coordinator will take on the responsibility of querying both data nodes and tasks to fetch segment schema and subsequently building the table schema. Brokers will now simply query the Coordinator to fetch table schema. Importantly, brokers will still retain the capability to build table schemas if the need arises, ensuring both flexibility and resilience.
Follow up changes to #12599
Changes:
- Rename column `used_flag_last_updated` to `used_status_last_updated`
- Remove new CLI tool `UpdateTables`.
- We already have a `CreateTables` with similar functionality, which should be able to
handle update cases too.
- Any user running the cluster for the first time should either just have `connector.createTables`
enabled or run `CreateTables` which should create tables at the latest version.
- For instance, the `UpdateTables` tool would be inadequate when a new metadata table has
been added to Druid, and users would have to run `CreateTables` anyway.
- Remove `upgrade-prep.md` and include that info in `metadata-init.md`.
- Fix log messages to adhere to Druid style
- Use lambdas
* Add new configurable buffer period to create gap between mark unused and kill of segment
* Changes after testing
* fixes and improvements
* changes after initial self review
* self review changes
* update sql statement that was lacking last_used
* shore up some code in SqlMetadataConnector after self review
* fix derby compatibility and improve testing/docs
* fix checkstyle violations
* Fixes post merge with master
* add some unit tests to improve coverage
* ignore test coverage on new UpdateTools cli tool
* another attempt to ignore UpdateTables in coverage check
* change column name to used_flag_last_updated
* fix a method signature after column name switch
* update docs spelling
* Update spelling dictionary
* Fixing up docs/spelling and integrating altering tasks table with my alteration code
* Update NULL values for used_flag_last_updated in the background
* Remove logic to allow segs with null used_flag_last_updated to be killed regardless of bufferPeriod
* remove unneeded things now that the new column is automatically updated
* Test new background row updater method
* fix broken tests
* fix create table statement
* cleanup DDL formatting
* Revert adding columns to entry table by default
* fix compilation issues after merge with master
* discovered and fixed metastore inserts that were breaking integration tests
* fixup forgotten insert by using pattern of sharing now timestamp across columns
* fix issue introduced by merge
* fixup after merge with master
* add some directions to docs in the case of segment table validation issues
* Claim full support for Java 17.
No production code has changed, except the startup scripts.
Changes:
1) Allow Java 17 without DRUID_SKIP_JAVA_CHECK.
2) Include the full list of opens and exports on both Java 11 and 17.
3) Document that Java 17 is both supported and preferred.
4) Switch some tests from Java 11 to 17 to get better coverage on the
preferred version.
* Doc update.
* Update errorprone.
* Update docker_build_containers.sh.
* Update errorprone in licenses.yaml.
* Add some more run-javas.
* Additional run-javas.
* Update errorprone.
* Suppress new errorprone error.
* Add exports and opens in ForkingTaskRunner for Java 11+.
Test, doc changes.
* Additional errorprone updates.
* Update for errorprone.
* Restore old fomatting in LdapCredentialsValidator.
* Copy bin/ too.
* Fix Java 15, 17 build line in docker_build_containers.sh.
* Update busybox image.
* One more java command.
* Fix interpolation.
* IT commandline refinements.
* Switch to busybox 1.34.1-glibc.
* POM adjustments, build and test one IT on 17.
* Additional debugging.
* Fix silly thing.
* Adjust command line.
* Add exports and opens one more place.
* Additional harmonization of strong encapsulation parameters.
Our CI system has a lot of tests. And much of this testing is really unnecessary for most of the PRs. This PR adds some checks so we can skip these expensive tests when we know they are not necessary.
The query context is a way that the user gives a hint to the Druid query engine, so that they enforce a certain behavior or at least let the query engine prefer a certain plan during query planning. Today, there are 3 types of query context params as below.
Default context params. They are set via druid.query.default.context in runtime properties. Any user context params can be default params.
User context params. They are set in the user query request. See https://druid.apache.org/docs/latest/querying/query-context.html for parameters.
System context params. They are set by the Druid query engine during query processing. These params override other context params.
Today, any context params are allowed to users. This can cause
1) a bad UX if the context param is not matured yet or
2) even query failure or system fault in the worst case if a sensitive param is abused, ex) maxSubqueryRows.
This PR adds an ability to limit context params per user role. That means, a query will fail if you have a context param set in the query that is not allowed to you. To do that, this PR adds a new built-in resource type, QUERY_CONTEXT. The resource to authorize has a name of the context param (such as maxSubqueryRows) and the type of QUERY_CONTEXT. To allow a certain context param for a user, the user should be granted WRITE permission on the context param resource. Here is an example of the permission.
{
"resourceAction" : {
"resource" : {
"name" : "maxSubqueryRows",
"type" : "QUERY_CONTEXT"
},
"action" : "WRITE"
},
"resourceNamePattern" : "maxSubqueryRows"
}
Each role can have multiple permissions for context params. Each permission should be set for different context params.
When a query is issued with a query context X, the query will fail if the user who issued the query does not have WRITE permission on the query context X. In this case,
HTTP endpoints will return 403 response code.
JDBC will throw ForbiddenException.
Note: there is a context param called brokerService that is used only by the router. This param is used to pin your query to run it in a specific broker. Because the authorization is done not in the router, but in the broker, if you have brokerService set in your query without a proper permission, your query will fail in the broker after routing is done. Technically, this is not right because the authorization is checked after the context param takes effect. However, this should not cause any user-facing issue and thus should be OK. The query will still fail if the user doesn’t have permission for brokerService.
The context param authorization can be enabled using druid.auth.authorizeQueryContextParams. This is disabled by default to avoid any hassle when someone upgrades his cluster blindly without reading release notes.
The current default value of inputSegmentSizeBytes is 400MB, which is pretty
low for most compaction use cases. Thus most users are forced to override the
default.
The default value is now increased to Long.MAX_VALUE.
* working
* Lazily load segmentKillers, segmentMovers, and segmentArchivers
* more tests
* test-jar plugin
* more coverage
* lazy client
* clean up changes
* checkstyle
* i did not change the branch condition
* adjust failure rate to run tests faster
* javadocs
* checkstyle
* Use Druid's extension loading for integration test instead of maven
* fix maven command
* override config path
* load input format extensions and kafka by default; add prepopulated-data group
* all docker-composes are overridable
* fix s3 configs
* override config for all
* fix docker_compose_args
* fix security tests
* turn off debug logs for overlord api calls
* clean up stuff
* revert docker-compose.yml
* fix override config for query error test; fix circular dependency in docker compose
* add back some dependencies in docker compose
* new maven profile for integration test
* example file filter
Add support for hadoop 3 profiles . Most of the details are captured in #11791 .
We use a combination of maven profiles and resource filtering to achieve this. Hadoop2 is supported by default and a new maven profile with the name hadoop3 is created. This will allow the user to choose the profile which is best suited for the use case.
* Revert "Require Datasource WRITE authorization for Supervisor and Task access (#11718)"
This reverts commit f2d6100124.
* Revert "Require DATASOURCE WRITE access in SupervisorResourceFilter and TaskResourceFilter (#11680)"
This reverts commit 6779c4652d.
* Fix docs for the reverted commits
* Fix and restore deleted tests
* Fix and restore SystemSchemaTest
Follow up PR for #11680
Description
Supervisor and Task APIs are related to ingestion and must always require Datasource WRITE
authorization even if they are purely informative.
Changes
Check Datasource WRITE in SystemSchema for tables "supervisors" and "tasks"
Check Datasource WRITE for APIs /supervisor/history and /supervisor/{id}/history
Check Datasource for all Indexing Task APIs
Fixes#11297.
Description
Description and design in the proposal #11297
Key changed/added classes in this PR
*DataSegmentPusher
*ShuffleClient
*PartitionStat
*PartitionLocation
*IntermediaryDataManager
* support using mariadb connector with mysql extensions
* cleanup and more tests
* fix test
* javadocs, more tests, etc
* style and more test
* more test more better
* missing pom
* more pom
With this change, Druid will only support ZooKeeper 3.5.x and later.
In order to support Java 15 we need to switch to ZK 3.5.x client libraries and drop support for ZK 3.4.x
(see #10780 for the detailed reasons)
* remove ZooKeeper 3.4.x compatibility
* exclude additional ZK 3.5.x netty dependencies to ensure we use our version
* keep ZooKeeper version used for integration tests in sync with client library version
* remove the need to specify ZK version at runtime for docker
* add support to run integration tests with JDK 15
* build and run unit tests with Java 15 in travis
* Do not stop retrying when an exception is encountered. Save & propagate last exception if retry count is exceeded.
* Add one more log message to help with debugging
* Limit schema registry heap to attempt to control OOMs
* upgrade to Apache Kafka 2.8.0 (release notes:
https://downloads.apache.org/kafka/2.8.0/RELEASE_NOTES.html)
* pass Kafka version as a Docker argument in integration tests
to keep in sync with maven version
* fix use of internal Kafka APIs in integration tests
* JavaScript script engine support was removed in JDK 15: skip those tests for JDKs without it
* Fix flaky HTTP client tests with Java 15
* Switch from CMS to G1GC in integration tests, since CMS is no longer available in JDK 15
* DruidInputSource: Fix issues in column projection, timestamp handling.
DruidInputSource, DruidSegmentReader changes:
1) Remove "dimensions" and "metrics". They are not necessary, because we
can compute which columns we need to read based on what is going to
be used by the timestamp, transform, dimensions, and metrics.
2) Start using ColumnsFilter (see below) to decide which columns we need
to read.
3) Actually respect the "timestampSpec". Previously, it was ignored, and
the timestamp of the returned InputRows was set to the `__time` column
of the input datasource.
(1) and (2) together fix a bug in which the DruidInputSource would not
properly read columns that are used as inputs to a transformSpec.
(3) fixes a bug where the timestampSpec would be ignored if you attempted
to set the column to something other than `__time`.
(1) and (3) are breaking changes.
Web console changes:
1) Remove "Dimensions" and "Metrics" from the Druid input source.
2) Set timestampSpec to `{"column": "__time", "format": "millis"}` for
compatibility with the new behavior.
Other changes:
1) Add ColumnsFilter, a new class that allows input readers to determine
which columns they need to read. Currently, it's only used by the
DruidInputSource, but it could be used by other columnar input sources
in the future.
2) Add a ColumnsFilter to InputRowSchema.
3) Remove the metric names from InputRowSchema (they were unused).
4) Add InputRowSchemas.fromDataSchema method that computes the proper
ColumnsFilter for given timestamp, dimensions, transform, and metrics.
5) Add "getRequiredColumns" method to TransformSpec to support the above.
* Various fixups.
* Uncomment incorrectly commented lines.
* Move TransformSpecTest to the proper module.
* Add druid.indexer.task.ignoreTimestampSpecForDruidInputSource setting.
* Fix.
* Fix build.
* Checkstyle.
* Misc fixes.
* Fix test.
* Move config.
* Fix imports.
* Fixup.
* Fix ShuffleResourceTest.
* Add import.
* Smarter exclusions.
* Fixes based on tests.
Also, add TIME_COLUMN constant in the web console.
* Adjustments for tests.
* Reorder test data.
* Update docs.
* Update docs to say Druid 0.22.0 instead of 0.21.0.
* Fix test.
* Fix ITAutoCompactionTest.
* Changes from review & from merging.
Rishabh Singh
Kashif Faraz
Abhishek Agarwal
Lucas Capistrant
Tejaswini Bandlamudi
Gian Merlino
Maytas Monsereenusorn
Rohan Garg
Jihoon Son
Suneet Saldanha
Frank Chen
Karan Kumar
Clint Wylie
Parag Jain
zachjsh
Xavier Léauté
Agustin Gonzalez
Yi Yuan
Himadri Singh