sqlJoinAlgorithm is now a hint to the planner to execute the join in the specified manner. The planner can decide to ignore the hint if it deduces that the specified algorithm can be detrimental to the performance of the join beforehand.
* Refactor HllSketchBuildAggregatorFactory
The usage of ColumnProcessors and HllSketchBuildColumnProcessorFactory
made it very difficult to figure out what was going on from just looking
at the AggregatorFactory or Aggregator code. It also didn't properly
double check that you could use UTF8 ahead of time, even though it's
entirely possible to validate it before trying to use it. This refactor
makes keeps the general indirection that had been implemented by
the Consumer<Supplier<HllSketch>> but centralizes the decision logic and
makes it easier to understand the code.
* Test fixes
* Add test that validates the types are maintained
* Add back indirection to avoid buffer calls
* Cover floats and doubles are the same thing
* Static checks
* Claim full support for Java 17.
No production code has changed, except the startup scripts.
Changes:
1) Allow Java 17 without DRUID_SKIP_JAVA_CHECK.
2) Include the full list of opens and exports on both Java 11 and 17.
3) Document that Java 17 is both supported and preferred.
4) Switch some tests from Java 11 to 17 to get better coverage on the
preferred version.
* Doc update.
* Update errorprone.
* Update docker_build_containers.sh.
* Update errorprone in licenses.yaml.
* Add some more run-javas.
* Additional run-javas.
* Update errorprone.
* Suppress new errorprone error.
* Add exports and opens in ForkingTaskRunner for Java 11+.
Test, doc changes.
* Additional errorprone updates.
* Update for errorprone.
* Restore old fomatting in LdapCredentialsValidator.
* Copy bin/ too.
* Fix Java 15, 17 build line in docker_build_containers.sh.
* Update busybox image.
* One more java command.
* Fix interpolation.
* IT commandline refinements.
* Switch to busybox 1.34.1-glibc.
* POM adjustments, build and test one IT on 17.
* Additional debugging.
* Fix silly thing.
* Adjust command line.
* Add exports and opens one more place.
* Additional harmonization of strong encapsulation parameters.
Recently #14532 fixed a problem when maxLazyWorkers == 0 and lazyWorkers
starts out empty. Unfortunately, even after that patch, there remained
a more general version of this problem when maxLazyWorkers == lazyWorkers.size().
This patch fixes it.
I'm not sure if this would actually happen in production, because the
provisioning strategies do try to avoid calling markWorkersLazy until
previously-initiated terminations have finished. Nevertheless, it still
seems like a good thing to fix.
One of the most requested features in druid is to have an ability to download big result sets.
As part of #14416 , we added an ability for MSQ to be queried via a query friendly endpoint. This PR builds upon that work and adds the ability for MSQ to write select results to durable storage.
We write the results to the durable storage location <prefix>/results/<queryId> in the druid frame format. This is exposed to users by
/v2/sql/statements/:queryId/results.
Description:
`TaskQueue.notifyStatus` is often a heavy call as it performs the following operations:
- Update task status in metadata DB
- Update task locks in metadata DB
- Request (synchronously) the task runner to shutdown the completed task
- Clean up in-memory data structures
This method can often be slow and can cause worker sync / task runners to slow down.
Main changes:
- Run task completion callbacks in a separate executor to handle task completion updates
- Add new config `druid.indexer.queue.taskCompleteHandlerNumThreads`
- Add metrics to monitor number of processed and queued items
- There are still other paths that can invoke `notifyStatus`, but those need not be moved to
the new executor as they are synchronous on purpose.
Other changes:
- Add new metrics `task/status/queue/count`, `task/status/handled/count`
- Add `TaskCountStatsProvider.getStats()` which deprecates the other `getXXXTaskCount` methods.
- Use `CoordinatorRunStats` to collect and report metrics. This class has been used as is
for now but will later be renamed and repurposed to use across all Druid services.
Apache Druid brings multiple direct and transitive dependencies that are affected by plethora of CVEs.
This PR attempts to update all the dependencies that did not require code refactoring.
This PR modifies pom files, license file and OWASP Dependency Check suppression file.
The wait doesn't seem to serve a purpose, other than causing delays
when checking isInitialized() for a large number of things that have
not yet been initialized.
* Fix ColumnSignature error message and jdk17 test issue.
On jdk17, the "problem" part of the error message could change from
NullPointerException to:
Cannot invoke "String.length()" because "s" is null
Due to the new more-helpful NPEs in Java 17. This broke the expectation
and led to test failures on this case.
This patch fixes the problem by improving the error message so it isn't
a generic NullPointerException.
* Fix format.
* Add support for DML WITH AS.
* One more UT for with as subquery.
* Add a test with join query
* Use root query prepared node instead of individual SqlNode types.
- Set the explain plan attributes after the query is prepared when
the query is planned and we've the finalized output names in the root
source rel node.
- Adjust tests; add unit test for negative ordinal case.
- Remove the exception / error handling logic from resolveClusteredBy
function since the validations now happen before it comes to the function
* Update comment.
This commit borrows some test definitions from Drill's test suite
and tries to use them to flesh out the full validation of window
function capbilities.
In order to be able to run these tests, we also add the ability to
run a Scan operation against segments, which also meant an
implementation of RowsAndColumns for frames.
UniformGranularityTest's test to test a large number of intervals
runs through 10 years of 1 second intervals. This pushes a lot of
stuff through IntervalIterator and shows up in terms of test
runtime as one of the hottest tests. Most of the time is going to
constructing jodatime objects because it is doing things with
DateTime objects instead of millis. Change the calls to use
millis instead and things go faster.
If a server is removed during `HttpServerInventoryView.serverInventoryInitialized`,
the initialization gets stuck as this server is never synced. The method eventually times
out (default 250s).
Fix: Mark a server as stopped if it is removed. `serverInventoryInitialized` only waits for
non-stopped servers to sync.
Other changes:
- Add new metrics for better debugging of slow broker/coordinator startup
- `segment/serverview/sync/healthy`: whether the server view is syncing properly with a server
- `segment/serverview/sync/unstableTime`: time for which sync with a server has been unstable
- Clean up logging in `HttpServerInventoryView` and `ChangeRequestHttpSyncer`
- Minor refactor for readability
- Add utility class `Stopwatch`
- Add tests and stubs
After #13197 , several coordinator configs are now redundant as they are not being
used anymore, neither with `smartSegmentLoading` nor otherwise.
Changes:
- Remove dynamic configs `emitBalancingStats`: balancer error stats are always
emitted, debug stats can be logged by using `debugDimensions`
- `useBatchedSegmentSampler`, `percentOfSegmentsToConsiderPerMove`:
batched segment sampling is always used
- Add test to verify deserialization with unknown properties
- Update `CoordinatorRunStats` to always track stats, this can be optimized later.
with a RuntimeException. Now the RuntimeException is being replaced by an user facing DruidException of Invalid category which would allow calcite not to throw an uncategorized exception.
The latest topic offsets are polled frequently and used to determine the lag based on the current offsets. However, when the offsets are stale (which can happen due to connection issues commonly), we may see a negative lag .
This PR prevents emission of metrics when the offsets are stale and at least one of the partitions has a negative lag.
Currently, IntelliJ-inspections are run sequentially w.r.t static-checks, thereby increasing build time. Moving IntelliJ-inspections to a separate job to improve builds time and get a quick insight into such issues early on.
* Changes the get results API in SqlStatementResource to take a page number instead of row/offset.
* Adds "pages" containing information on each page to the results status.
* Update the "numRows" and "sizeInByes" to "numTotalRows" and "totalSizeInBytes" respectively, which are totalled across all pages.
* combine string column implementations
changes:
* generic indexed, front-coded, and auto string columns now all share the same column and index supplier implementations
* remove CachingIndexed implementation, which I think is largely no longer needed by the switch of many things to directly using ByteBuffer, avoiding the cost of creating Strings
* remove ColumnConfig.columnCacheSizeBytes since CachingIndexed was the only user
1) Fix a problem where the fault wasn't reported when the left-hand side
had too many buffered frames. (Instead, frames continued to be buffered,
eventually running the server out of memory.)
2) Always update the mark when rewinding isn't necessary. It fixes a problem where
frames would be needlessly buffered when there isn't a key match across
the two sides.
3) Memory reserved for building the trackers now change based on the heap sized
* Add "stringEncoding" parameter to DataSketches HLL.
Builds on the concept from #11172 and adds a way to feed HLL sketches
with UTF-8 bytes.
This must be an option rather than always-on, because prior to this
patch, HLL sketches used UTF-16LE encoding when hashing strings. To
remain compatible with sketch images created prior to this patch -- which
matters during rolling updates and when reading sketches that have been
written to segments -- we must keep UTF-16LE as the default.
Not currently documented, because I'm not yet sure how best to expose
this functionality to users. I think the first place would be in the SQL
layer: we could have it automatically select UTF-8 or UTF-16LE when
building sketches at query time. We need to be careful about this, though,
because UTF-8 isn't always faster. Sometimes, like for the results of
expressions, UTF-16LE is faster. I expect we will sort this out in
future patches.
* Fix benchmark.
* Fix style issues, improve test coverage.
* Put round back, to make IT updates easier.
* Fix test.
* Fix issue with filtered aggregators and add test.
* Use DS native update(ByteBuffer) method. Improve test coverage.
* Add another suppression.
* Fix ITAutoCompactionTest.
* Update benchmarks.
* Updates.
* Fix conflict.
* Adjustments.
In these other cases, stick to plain "filter". This simplifies lots of
logic downstream, and doesn't hurt since we don't have intervals-specific
optimizations outside of tables.
Fixes an issue where we couldn't properly filter on a column from an
external datasource if it was named __time.
Mocks generally have state and should not be static. In particular, the
"Yielder" included in one of the mocks can only be iterated once, which
made the test suite order-dependent.
* Support complex variance object inputs for variance SQL agg function
* Add test
* Include complexTypeChecker, address PR comments
* Checkstyle, javadoc link
Currently, github notification emails to commits@druid.apache.org have
a wide variety of subject lines. This foils email client threading and
makes the firehose of emails hard to follow. This is an attempt,
inspired by the config for plc4x, to make the emails easier to follow.
After this change, it may even make sense to send some to dev@ instead
of commits@.
* Properly read SQL-compatible segments in default-value mode.
Main changes:
1) Dictionary-encoded and front-coded string columns: in default-value
mode, detect cases where a dictionary has the empty string in it, then
either combine it with null (if null is present) or replace it with
null (if null is not present).
2) Numeric nullable columns: in default-value mode, ignore the null
value bitmap. This causes all null numbers to be read as zeroes.
Testing strategy:
1) Add a mmappedWithSqlCompatibleNulls case to BaseFilterTest that
writes segments under SQL-compatible mode, and reads them under
default-value mode.
2) Unit tests for the new wrapper classes (CombineFirstTwoEntriesIndexed,
CombineFirstTwoValuesColumnarInts, CombineFirstTwoValuesColumnarMultiInts,
CombineFirstTwoValuesIndexedInts).
* Fix a mistake, use more singlethreadedness.
* WIP
* Tests, improvements.
* Style.
* See Spot bug.
* Remove unused method.
* Address review comments.
1) Read bitmaps even if we don't retain them.
2) Combine StringFrontCodedDictionaryEncodedColumn and ScalarStringDictionaryEncodedColumn.
* Add missing tests.
This PR aims to expose a new API called
"@path("/druid/v2/sql/statements/")" which takes the same payload as the current "/druid/v2/sql" endpoint and allows users to fetch results in an async manner.
* Fix another infinite loop and remove Mockito usage
The ConfigManager objects were `started()` without ever being
stopped. This scheduled a poll call that never-ended, to make
matters worse, the poll interval was set to 0 ms, making an
infinite poll with 0 sleep, i.e. an infinite loop.
Also introduce test classes and remove usage of mocks
* Checkstyle
dependabot[bot]
Laksh Singla
Pranav
Adarsh Sanjeev
imply-cheddar
Tejaswini Bandlamudi
Kashif Faraz
Gian Merlino
Katya Macedo
Karan Kumar
Jan Werner
Abhishek Radhakrishnan
Soumyava
Jonathan Wei
Victoria Lim
AmatyaAvadhanula
Jakub Matyszewski
Rishabh Singh
Nhi Pham
Clint Wylie