There result would be {"error"=>"Unknown exception",
"errorMessage"=>nil, "errorClass"=>"java.lang.NullPointerException",
"host"=>nil} when the json lack of 『granularity』.
* coordinator lookups mgmt improvements
* revert replaces removal, deprecate it instead
* convert and use older specs stored in db
* more tests and updates
* review comments
* add behavior for 0.10.0 to 0.9.2 downgrade
* incorporating more review comments
* remove explicit lock and use LifecycleLock in LookupReferencesManager. use LifecycleLock in LookupCoordinatorManager as well
* wip on LookupCoordinatorManager
* lifecycle lock
* refactor thread creation into utility method
* more review comments addressed
* support smooth roll back of lookup snapshots from 0.10.0 to 0.9.2
* correctly use LifecycleLock in LookupCoordinatorManager and remove synchronization from start/stop
* run lookup mgmt on leader coordinator only
* wip: changes to do multiple start() and stop() on LookupCoordinatorManager
* lifecycleLock fix usage in LookupReferencesManagerTest
* add LifecycleLock back
* fix license hdr
* some fixes
* make LookupReferencesManager.getAllLookupsState() consistent while still being lockless
* address review comments
* addressing leventov's comments
* address charle's comments
* add IOE.java
* for safety in LookupReferencesManager mainThread check for lifecycle started state on each loop in addition to interrupt
* move thread creation utility method to Execs
* fix names
* add tests for LookupCoordinatorManager.lookupManagementLoop()
* add further tests for figuring out toBeLoaded and toBeDropped on LookupCoordinatorManager
* address leventov comments
* remove LookupsStateWithMap and parameterize LookupsState
* address review comments
* address more review comments
* misc fixes
Updating the description of useCache
Updating query-context doc based on Gian's comment
Updating query-context doc based on Gian's comment
Updating query-context doc based on Gian's comment
Updating query-context doc based on Gian's comment
* Make timeout behavior consistent to document
* Refactoring BlockingPool and add more methods to QueryContexts
* remove unused imports
* Addressed comments
* Address comments
* remove unused method
* Make default query timeout configurable
* Fix test failure
* Change timeout from period to millis
* Ignore chunkPeriod for groupBy v2, fix chunkPeriod for irregular periods.
Includes two fixes:
- groupBy v2 now ignores chunkPeriod, since it wouldn't have helped anyway (its mergeResults
returns a lazy sequence) and it generates incorrect results.
- Fix chunkPeriod handling for periods of irregular length, like "P1M" or "P1Y".
Also includes doc and test fixes:
- groupBy v1 was no longer being tested by GroupByQueryRunnerTest since #3953, now it
is once again.
- chunkPeriod documentation was misleading due to its checkered past. Updated it to
be more accurate.
* Remove unused import.
* Restore buffer size.
This puts all the SQL stuff in one place. It also makes life easier by
pointing out that configs be made in either common.runtime.properties
or the broker runtime.properties.
* SQL: Resolve column type conflicts in favor of newer segments.
Helps with schema evolution from e.g. long -> float, which is supported
on the query side.
* Take columns from highest timestamp instead of max segment id.
* Fixes and docs.
* SQL: Add context and contextual functions to planner.
Added support for context parameters specified as JDBC connection properties
or a JSON object for SQL-over-JSON-over-HTTP.
Also added features that depend on context functionality:
- Added CURRENT_DATE, CURRENT_TIME, CURRENT_TIMESTAMP functions.
- Added support for time zones other than UTC via a "timeZone" context.
- Pass down query context to Druid queries too.
Also some bug fixes:
- Fix DATE handling, it was largely done incorrectly before.
- Fix CAST(__time TO DATE) which should do a floor-to-day.
- Fix non-equality comparisons to FLOOR(__time TO X).
- Fix maxQueryCount property.
* Pass down context to nested queries too.
* SQL: Add resolution parameter to quantile agg, rename to APPROX_QUANTILE.
* Fix bug with re-use of filtered approximate histogram aggregators.
Also add APPROX_QUANTILE tests for filtering and running on complex columns.
Includes some slight refactoring to allow tests to make DruidTables that
include complex columns.
* Remove unused import
* SQL: Ditch CalciteConnection layer and add DruidMeta, extension aggregators.
Switched from CalciteConnection to Planner, bringing benefits:
- CalciteConnection's JDBC interface no longer sits between the SQL server
(HTTP/Avatica) and Druid's query layer. Instead, the SQL servers can use
Druid Sequence objects directly, reducing overhead in the query return path.
- Implemented our own Planner-based Avatica Meta, letting us control
connection timeouts and connection / statement limits. The previous
CalciteConnection-based implementation didn't have any limits or timeouts.
- The Planner interface lets us override the operator table, opening up
SQL language extensions. This patch includes two: APPROX_COUNT_DISTINCT
in core, and a QUANTILE aggregator in the druid-histogram extension.
Also:
- Added INFORMATION_SCHEMA metadata schema.
- Added tests for Unicode literals and escapes.
* Verify statement is actually open before closing it.
* More detailed INFORMATION_SCHEMA docs.
* SQL support for nested groupBys.
Allows, for example, doing exact count distinct by writing:
SELECT COUNT(*) FROM (SELECT DISTINCT col FROM druid.foo)
Contrast with approximate count distinct, which is:
SELECT COUNT(DISTINCT col) FROM druid.foo
* Add deeply-nested groupBy docs, tests, and maxQueryCount config.
* Extract magic constants into statics.
* Rework rules to put preconditions in the "matches" method.
* Add an option to SearchQuery to choose a search query execution strategy.
Supported strategies are
1) Index-only query execution
2) Cursor-based scan
3) Auto: choose an efficient strategy for a given query
* Add SearchStrategy and SearchQueryExecutor
* Address comments
* Rename strategies and set UseIndexesStrategy as the default strategy
* Add a cost-based planner for auto strategy
* Add document
* Fix code style
* apply code style
* apply comments
* add first and last aggregator
* add test and fix
* moving around
* separate aggregator valueType
* address PR comment
* add finalize inner query and adjust v1 inner indexing
* better test and fixes
* java-util import fixes
* PR comments
* Add first/last aggs to ITWikipediaQueryTest
* sortByDimsFirst flag for groupBy query
* Remove need for KeyType in Grouper<KeyType> to be Comparable<KeyType>
* fix review comments
* fix review comments regarding removing code duplication of dim/time comparison
* move comparator for KeyType object to KeySerdeFactory so that creation of comparator does not need KeySerde
* remove unnecessary system.out.println
* make access static var NATURAL_NULLS_FIRST directly
* further review comments addressing
* Add "like" filter.
* Addressed some PR comments.
* Slight simplifications to LikeFilter.
* Additional simplifications.
* Fix comment in LikeFilter.
* Clarify comment in LikeFilter.
* Simplify LikeMatcher a bit.
* No use going through the optimized path if prefix is empty.
* Add more tests.
Also change defaults:
- bufferGrouperMaxLoadFactor from 0.75 to 0.7.
- maxMergingDictionarySize to 100MB from 25MB, should be more appropriate
for most heaps.
Follow-up to #1773, which meant to add more useful query errors but
did not actually do so. Since that patch, any error other than
interrupt/cancel/timeout was reported as `{"error":"Unknown exception"}`.
With this patch, the error fields are:
- error, one of the specific strings "Query interrupted", "Query timeout",
"Query cancelled", or "Unknown exception" (same behavior as before).
- errorMessage, the message of the topmost non-QueryInterruptedException
in the causality chain.
- errorClass, the class of the topmost non-QueryInterruptedException
in the causality chain.
- host, the host that failed the query.
* Add time interval dim filter and retention analysis example
* Use closed-open matching for intervals, update cache key generation
* Fix time filtering tests for interval boundary change
* ability to not rollup at index time, make pre aggregation an option
* rename getRowIndexForRollup to getPriorIndex
* fix doc misspelling
* test query using no-rollup indexes
* fix benchmark fail due to jmh bug
* Add numeric StringComparator
* Only use direct long comparison for numeric ordering in BoundFilter, add time filtering benchmark query
* Address PR comments, add multithreaded BoundDimFilter test
* Add comment on strlen tie handling
* Add timeseries interval filter benchmark
* Adjust docs
* Use jackson for StringComparator, address PR comments
* Add new TopNMetricSpec and SearchSortSpec with tests (WIP)
* More TopNMetricSpec and SearchSortSpec tests
* Fix NewSearchSortSpec serde
* Update docs for new DimensionTopNMetricSpec
* Delete NumericDimensionTopNMetricSpec
* Delete old SearchSortSpec
* Rename NewSearchSortSpec to SearchSortSpec
* Add TopN numeric comparator benchmark, address PR comments
* Refactor OrderByColumnSpec
* Add null checks to NumericComparator and String->BigDecimal conversion function
* Add more OrderByColumnSpec serde tests
This fixes a potential issue where groupBy resources could be allocated to
create a Sequence, but then the Sequence is never used, and thus the resources
are never freed.
Also simplifies how groupBy handles config overrides (this made the new
unit test easier to write).
* Support filtering on __time column
* Rename DruidPredicate
* Add docs for ValueMatcherFactory, add comment on getColumnCapabilities
* Combine ValueMatcherFactory predicate methods to accept DruidCompositePredicate
* Address PR comments (support filter on all long columns)
* Use predicate factory instead of composite predicate
* Address PR comments
* Lazily initialize long handling in selector/in filter
* Move long value parsing from InFilter to InDimFilter, make long value parsing thread-safe
* Add multithreaded selector/in filter test
* Fix non-final lock object in SelectorDimFilter
This is actually reasonable for a groupBy or lexicographic topNs that is
being used to do a "COUNT DISTINCT" kind of query. No aggregators are
needed for that query, and including a dummy aggregator wastes 8 bytes
per row.
It's kind of silly for timeseries, but why not.
* support alphanumeric sort in search query
* address a comment about handling equals() and hashCode()
* address comments
* add Ut for string comparators
* address a comment about space indentations.
This patch introduces a GroupByStrategy concept and two strategies: "v1"
is the current groupBy strategy and "v2" is a new one. It also introduces
a merge buffers concept in DruidProcessingModule, to try to better
manage memory used for merging.
Both of these are described in more detail in #2987.
There are two goals of this patch:
1. Make it possible for historical/realtime nodes to return larger groupBy
result sets, faster, with better memory management.
2. Make it possible for brokers to merge streams when there are no order-by
columns, avoiding materialization.
This patch does not do anything to help with memory management on the broker
when there are order-by columns or when there are nested queries. That could
potentially be done in a future patch.
* docs: replace OR by AND inside topnquery docs about multi value dimensions
* docs: replace OR by AND inside groupby docs about multi value dimensions
* Cleanup the base lookup cluster wide config docs
* Add better examples in lookups-cached-global.md
* Use actual valid stock lookups
* Fixed maps with :
* Add mix of lookups
* Better examples in extension
* Remove unneeded namespace requirement
* Add extra line space
* Add link to lookup tiers
* Renamed header
* Async lookups-cached-global by default
* Also better lookup docs
* Fix test timeouts
* Fix timing of deserialized test
* Fix problem with 0 wait failing immediately
There is no such thing as a "Java aggregator" in Druid from a user's point of view, there are just native aggregator that happen to be implemented in Java.
* Datasource as lookup tier
* Adds an option to let indexing service tasks pull their lookup tier from the datasource they are working for.
* Fix bad docs for lookups lookupTier
* Add Datasource name holder
* Move task and datasource to be pulled from Task file
* Make LookupModule pull from bound dataSource
* Fix test
* Fix code style on imports
* Fix formatting
* Make naming better
* Address code comments about naming
* make isSingleThreaded groupBy query processing overridable at query time
* refactor code in GroupByMergedQueryRunner to make processing of single threaded and parallel merging of runners consistent
The behavior is now that filters on "null" will match rows with no
values. The behavior in the past was inconsistent; sometimes these
filters would match and sometimes they wouldn't.
Adds tests for this behavior to SelectorFilterTest and
BoundFilterTest, for query-level filters and filtered aggregates.
Fixes#2750.
This removes Filter.makeMatcher(ColumnSelectorFactory) and adds a
ValueMatcherFactory implementation to FilteredAggregatorFactory so it can
take advantage of existing makeMatcher(ValueMatcherFactory) implementations.
This patch also removes the Bound-based method from ValueMatcherFactory. Its
only user was the SpatialFilter, which could use the Predicate-based method.
Fixes#2604.
Jonathan Wei
Amar Ramachandran
kaijianding
fanjieqi
Kamal Gurala
zwang180
Himanshu
asrayousuf
Jihoon Son
Gian Merlino
Erik Dubbelboer
Gian Merlino
DaimonPl
Joan Viladrosa
rajk-tetration
Dave Li
jaehong choi
linbo.jin
Kirill Kozlov
Charles Allen
Vadim Ogievetsky
Parag Jain
Slim
jon-wei
Fangjin Yang
navis.ryu