### Description
This change enables the `KillUnusedSegments` coordinator duty to be scheduled continuously. Things that prevented this, or made this difficult before were the following:
1. If scheduled at fast enough rate, the duty would find the same intervals to kill for the same datasources, while kill tasks submitted for those same datasources and intervals were already underway, thus wasting task slots on duplicated work.
2. The task resources used by auto kill were previously unbounded. Each duty run period, if unused
segments were found for any datasource, a kill task would be submitted to kill them.
This pr solves for both of these issues:
1. The duty keeps track of the end time of the last interval found when killing unused segments for each datasource, in a in memory map. The end time for each datasource, if found, is used as the start time lower bound, when searching for unused intervals for that same datasource. Each duty run, we remove any datasource keys from this map that are no longer found to match datasources in the system, or in whitelist, and also remove a datasource entry, if there is found to be no unused segments for the datasource, which happens when we fail to find an interval which includes unused segments. Removing the datasource entry from the map, allows for searching for unusedSegments in the datasource from the beginning of time once again
2. The unbounded task resource usage can be mitigated with coordinator dynamic config added as part of ba957a9b97
Operators can configure continous auto kill by providing coordinator runtime properties similar to the following:
```
druid.coordinator.period.indexingPeriod=PT60S
druid.coordinator.kill.period=PT60S
```
And providing sensible limits to the killTask usage via coordinator dynamic properties.
There is a current issue due to inconsistent metadata between worker and controller in MSQ. A controller can receive one set of segments, which are then marked as unused by, say, a compaction job. The worker would be unable to get the segment information as MetadataResource.
Follow up changes to #12599
Changes:
- Rename column `used_flag_last_updated` to `used_status_last_updated`
- Remove new CLI tool `UpdateTables`.
- We already have a `CreateTables` with similar functionality, which should be able to
handle update cases too.
- Any user running the cluster for the first time should either just have `connector.createTables`
enabled or run `CreateTables` which should create tables at the latest version.
- For instance, the `UpdateTables` tool would be inadequate when a new metadata table has
been added to Druid, and users would have to run `CreateTables` anyway.
- Remove `upgrade-prep.md` and include that info in `metadata-init.md`.
- Fix log messages to adhere to Druid style
- Use lambdas
* Add new configurable buffer period to create gap between mark unused and kill of segment
* Changes after testing
* fixes and improvements
* changes after initial self review
* self review changes
* update sql statement that was lacking last_used
* shore up some code in SqlMetadataConnector after self review
* fix derby compatibility and improve testing/docs
* fix checkstyle violations
* Fixes post merge with master
* add some unit tests to improve coverage
* ignore test coverage on new UpdateTools cli tool
* another attempt to ignore UpdateTables in coverage check
* change column name to used_flag_last_updated
* fix a method signature after column name switch
* update docs spelling
* Update spelling dictionary
* Fixing up docs/spelling and integrating altering tasks table with my alteration code
* Update NULL values for used_flag_last_updated in the background
* Remove logic to allow segs with null used_flag_last_updated to be killed regardless of bufferPeriod
* remove unneeded things now that the new column is automatically updated
* Test new background row updater method
* fix broken tests
* fix create table statement
* cleanup DDL formatting
* Revert adding columns to entry table by default
* fix compilation issues after merge with master
* discovered and fixed metastore inserts that were breaking integration tests
* fixup forgotten insert by using pattern of sharing now timestamp across columns
* fix issue introduced by merge
* fixup after merge with master
* add some directions to docs in the case of segment table validation issues
* Add supervisor /resetOffsets API.
- Add a new endpoint /druid/indexer/v1/supervisor/<supervisorId>/resetOffsets
which accepts DataSourceMetadata as a body parameter.
- Update logs, unit tests and docs.
* Add a new interface method for backwards compatibility.
* Rename
* Adjust tests and javadocs.
* Use CoreInjectorBuilder instead of deprecated makeInjectorWithModules
* UT fix
* Doc updates.
* remove extraneous debugging logs.
* Remove the boolean setting; only ResetHandle() and resetInternal()
* Relax constraints and add a new ResetOffsetsNotice; cleanup old logic.
* A separate ResetOffsetsNotice and some cleanup.
* Minor cleanup
* Add a check & test to verify that sequence numbers are only of type SeekableStreamEndSequenceNumbers
* Add unit tests for the no op implementations for test coverage
* CodeQL fix
* checkstyle from merge conflict
* Doc changes
* DOCUSAURUS code tabs fix. Thanks, Brian!
In this PR, I have gotten rid of multiTopic parameter and instead added a topicPattern parameter. Kafka supervisor will pass topicPattern or topic as the stream name to the core ingestion engine. There is validation to ensure that only one of topic or topicPattern will be set. This new setting is easier to understand than overloading the topic field that earlier could be interpreted differently depending on the value of some other field.
This PR adds support to read from multiple Kafka topics in the same supervisor. A multi-topic ingestion can be useful in scenarios where a cluster admin has no control over input streams. Different teams in an org may create different input topics that they can write the data to. However, the cluster admin wants all this data to be queryable in one data source.
* Update to Calcite 1.35.0
* Update from.ftl for Calcite 1.35.0.
* Fixed tests in Calcite upgrade by doing the following:
1. Added a new rule, CoreRules.PROJECT_FILTER_TRANSPOSE_WHOLE_PROJECT_EXPRESSIONS, to Base rules
2. Refactored the CorrelateUnnestRule
3. Updated CorrelateUnnestRel accordingly
4. Fixed a case with selector filters on the left where Calcite was eliding the virtual column
5. Additional test cases for fixes in 2,3,4
6. Update to StringListAggregator to fail a query if separators are not propagated appropriately
* Refactored for testcases to pass after the upgrade, introduced 2 new data sources for handling filters and select projects
* Added a literalSqlAggregator as the upgraded Calcite involved changes to subquery remove rule. This corrected plans for 2 queries with joins and subqueries by replacing an useless literal dimension with a post agg. Additionally a test with COUNT DISTINCT and FILTER which was failing with Calcite 1.21 is added here which passes with 1.35
* Updated to latest avatica and updated code as SqlUnknownTimeStamp is now used in Calcite which needs to be resolved to a timestamp literal
* Added a wrapper segment ref to use for unnest and filter segment reference
### Description
Added the following metrics, which are calculated from the `KillUnusedSegments` coordinatorDuty
`"killTask/availableSlot/count"`: calculates the number remaining task slots available for auto kill
`"killTask/maxSlot/count"`: calculates the maximum number of tasks available for auto kill
`"killTask/task/count"`: calculates the number of tasks submitted by auto kill.
#### Release note
NEW: metrics added for auto kill
`"killTask/availableSlot/count"`: calculates the number remaining task slots available for auto kill
`"killTask/maxSlot/count"`: calculates the maximum number of tasks available for auto kill
`"killTask/task/count"`: calculates the number of tasks submitted by auto kill.
The Azure connector is introduced and MSQ's fault tolerance and durable storage can now be used with Microsoft Azure's blob storage. Also, the results of newly introduced queries from deep storage can now store and fetch the results from Azure's blob storage.
### Description
Previously, the `KillUnusedSegments` coordinator duty, in charge of periodically deleting unused segments, could spawn an unlimited number of kill tasks for unused segments. This change adds 2 new coordinator dynamic configs that can be used to control the limit of tasks spawned by this coordinator duty
`killTaskSlotRatio`: Ratio of total available task slots, including autoscaling if applicable that will be allowed for kill tasks. This limit only applies for kill tasks that are spawned automatically by the coordinator's auto kill duty. Default is 1, which allows all available tasks to be used, which is the existing behavior
`maxKillTaskSlots`: Maximum number of tasks that will be allowed for kill tasks. This limit only applies for kill tasks that are spawned automatically by the coordinator's auto kill duty. Default is INT.MAX, which essentially allows for unbounded number of tasks, which is the existing behavior.
Realize that we can effectively get away with just the one `killTaskSlotRatio`, but following similarly to the compaction config, which has similar properties; I thought it was good to have some control of the upper limit regardless of ratio provided.
#### Release note
NEW: `killTaskSlotRatio` and `maxKillTaskSlots` coordinator dynamic config properties added that allow control of task resource usage spawned by `KillUnusedSegments` coordinator task (auto kill)
### Description
Previously, the `maxSegments` configured for auto kill could be ignored if an interval of data for a given datasource had more than this number of unused segments, causing the kill task spawned with the task of deleting unused segments in that given interval of data to delete more than the `maxSegments` configured. Now each kill task spawned by the auto kill coordinator duty, will kill at most `limit` segments. This is done by adding a new config property to the `KillUnusedSegmentTask` which allows users to specify this limit.
* Remove chatAsync parameter, so chat is always async.
chatAsync has been made default in Druid 26. I have seen good
battle-testing of it in production, and am comfortable removing the
older sync client.
This was the last remaining usage of IndexTaskClient, so this patch
deletes all that stuff too.
* Remove unthrown exception.
* Remove unthrown exception.
* No more TimeoutException.
split KillUnusedSegmentsTask to smaller batches
Processing in smaller chunks allows the task execution to yield the TaskLockbox lock,
which allows the overlord to continue being responsive to other tasks and users while
this particular kill task is executing.
* introduce KillUnusedSegmentsTask batchSize parameter to control size of batching
* provide an explanation for kill task batchSize parameter
* add logging details for kill batch progress
Clint Wylie
zachjsh
Adarsh Sanjeev
Giulio Talarico
Zoltan Haindrich
Soumyava
Benedict Jin
Katya Macedo
Nhi Pham
Kashif Faraz
Lucas Capistrant
Abhishek Radhakrishnan
Abhishek Agarwal
317brian
YongGang
Laksh Singla
Tejaswini Bandlamudi
Suneet Saldanha
Victoria Lim
George Shiqi Wu
Gian Merlino
Jason Koch
slfan1989