94 KiB
id | title | sidebar_label |
---|---|---|
sql | SQL | Druid SQL |
Apache Druid supports two query languages: Druid SQL and native queries. This document describes the SQL language.
Druid SQL is a built-in SQL layer and an alternative to Druid's native JSON-based query language, and is powered by a parser and planner based on Apache Calcite. Druid SQL translates SQL into native Druid queries on the query Broker (the first process you query), which are then passed down to data processes as native Druid queries. Other than the (slight) overhead of translating SQL on the Broker, there isn't an additional performance penalty versus native queries.
Query syntax
Druid SQL supports SELECT queries with the following structure:
[ EXPLAIN PLAN FOR ]
[ WITH tableName [ ( column1, column2, ... ) ] AS ( query ) ]
SELECT [ ALL | DISTINCT ] { * | exprs }
FROM { <table> | (<subquery>) | <o1> [ INNER | LEFT ] JOIN <o2> ON condition }
[ WHERE expr ]
[ GROUP BY [ exprs | GROUPING SETS ( (exprs), ... ) | ROLLUP (exprs) | CUBE (exprs) ] ]
[ HAVING expr ]
[ ORDER BY expr [ ASC | DESC ], expr [ ASC | DESC ], ... ]
[ LIMIT limit ]
[ OFFSET offset ]
[ UNION ALL <another query> ]
FROM
The FROM clause can refer to any of the following:
- Table datasources from the
druid
schema. This is the default schema, so Druid table datasources can be referenced as eitherdruid.dataSourceName
or simplydataSourceName
. - Lookups from the
lookup
schema, for examplelookup.countries
. Note that lookups can also be queried using theLOOKUP
function. - Subqueries.
- Joins between anything in this list, except between native datasources (table, lookup, query) and system tables. The join condition must be an equality between expressions from the left- and right-hand side of the join.
- Metadata tables from the
INFORMATION_SCHEMA
orsys
schemas. Unlike the other options for the FROM clause, metadata tables are not considered datasources. They exist only in the SQL layer.
For more information about table, lookup, query, and join datasources, refer to the Datasources documentation.
WHERE
The WHERE clause refers to columns in the FROM table, and will be translated to native filters. The
WHERE clause can also reference a subquery, like WHERE col1 IN (SELECT foo FROM ...)
. Queries like this are executed
as a join on the subquery, described below in the Query translation section.
GROUP BY
The GROUP BY clause refers to columns in the FROM table. Using GROUP BY, DISTINCT, or any aggregation functions will
trigger an aggregation query using one of Druid's three native aggregation query types. GROUP BY
can refer to an expression or a select clause ordinal position (like GROUP BY 2
to group by the second selected
column).
The GROUP BY clause can also refer to multiple grouping sets in three ways. The most flexible is GROUP BY GROUPING SETS,
for example GROUP BY GROUPING SETS ( (country, city), () )
. This example is equivalent to a GROUP BY country, city
followed by GROUP BY ()
(a grand total). With GROUPING SETS, the underlying data is only scanned one time, leading to
better efficiency. Second, GROUP BY ROLLUP computes a grouping set for each level of the grouping expressions. For
example GROUP BY ROLLUP (country, city)
is equivalent to GROUP BY GROUPING SETS ( (country, city), (country), () )
and will produce grouped rows for each country / city pair, along with subtotals for each country, along with a grand
total. Finally, GROUP BY CUBE computes a grouping set for each combination of grouping expressions. For example,
GROUP BY CUBE (country, city)
is equivalent to GROUP BY GROUPING SETS ( (country, city), (country), (city), () )
.
Grouping columns that do not apply to a particular row will contain NULL
. For example, when computing
GROUP BY GROUPING SETS ( (country, city), () )
, the grand total row corresponding to ()
will have NULL
for the
"country" and "city" columns. Column may also be NULL
if it was NULL
in the data itself. To differentiate such rows,
you can use GROUPING
aggregation.
When using GROUP BY GROUPING SETS, GROUP BY ROLLUP, or GROUP BY CUBE, be aware that results may not be generated in the order that you specify your grouping sets in the query. If you need results to be generated in a particular order, use the ORDER BY clause.
HAVING
The HAVING clause refers to columns that are present after execution of GROUP BY. It can be used to filter on either grouping expressions or aggregated values. It can only be used together with GROUP BY.
ORDER BY
The ORDER BY clause refers to columns that are present after execution of GROUP BY. It can be used to order the results
based on either grouping expressions or aggregated values. ORDER BY can refer to an expression or a select clause
ordinal position (like ORDER BY 2
to order by the second selected column). For non-aggregation queries, ORDER BY
can only order by the __time
column. For aggregation queries, ORDER BY can order by any column.
LIMIT
The LIMIT clause limits the number of rows returned. In some situations Druid will push down this limit to data servers, which boosts performance. Limits are always pushed down for queries that run with the native Scan or TopN query types. With the native GroupBy query type, it is pushed down when ordering on a column that you are grouping by. If you notice that adding a limit doesn't change performance very much, then it's possible that Druid wasn't able to push down the limit for your query.
OFFSET
The OFFSET clause skips a certain number of rows when returning results.
If both LIMIT and OFFSET are provided, then OFFSET will be applied first, followed by LIMIT. For example, using LIMIT 100 OFFSET 10 will return 100 rows, starting from row number 10.
Together, LIMIT and OFFSET can be used to implement pagination. However, note that if the underlying datasource is modified between page fetches, then the different pages will not necessarily align with each other.
There are two important factors that can affect the performance of queries that use OFFSET:
- Skipped rows still need to be generated internally and then discarded, meaning that raising offsets to high values can cause queries to use additional resources.
- OFFSET is only supported by the Scan and GroupBy native query types. Therefore, a query with OFFSET will use one of those two types, even if it might otherwise have run as a Timeseries or TopN. Switching query engines in this way can affect performance.
UNION ALL
The "UNION ALL" operator fuses multiple queries together. Druid SQL supports the UNION ALL operator in two situations: top-level and table-level. Queries that use UNION ALL in any other way will not be able to execute.
Top-level
UNION ALL can be used at the very top outer layer of a SQL query (not in a subquery, and not in the FROM clause). In this case, the underlying queries will be run separately, back to back. Their results will be concatenated together and appear one after the other.
For example:
SELECT COUNT(*) FROM tbl WHERE my_column = 'value1'
UNION ALL
SELECT COUNT(*) FROM tbl WHERE my_column = 'value2'
With top-level UNION ALL, no further processing can be done after the UNION ALL. For example, the results of the UNION ALL cannot have GROUP BY, ORDER BY, or any other operators applied to them.
Table-level
UNION ALL can be used to query multiple tables at the same time. In this case, it must appear in a subquery in the FROM clause, and the lower-level subqueries that are inputs to the UNION ALL operator must be simple table SELECTs. Features like expressions, column aliasing, JOIN, GROUP BY, ORDER BY, and so on cannot be used. The query will run natively using a union datasource.
The same columns must be selected from each table in the same order, and those columns must either have the same types,
or types that can be implicitly cast to each other (such as different numeric types). For this reason, it is generally
more robust to write your queries to select specific columns. If you use SELECT *
, you will need to modify your
queries if a new column is added to one of the tables but not to the others.
For example:
SELECT col1, COUNT(*)
FROM (
SELECT col1, col2, col3 FROM tbl1
UNION ALL
SELECT col1, col2, col3 FROM tbl2
)
GROUP BY col1
With table-level UNION ALL, the rows from the unioned tables are not guaranteed to be processed in any particular order. They may be processed in an interleaved fashion. If you need a particular result ordering, use ORDER BY on the outer query.
EXPLAIN PLAN
Add "EXPLAIN PLAN FOR" to the beginning of any query to get information about how it will be translated. In this case, the query will not actually be executed. Refer to the Query translation documentation for help interpreting EXPLAIN PLAN output.
Identifiers and literals
Identifiers like datasource and column names can optionally be quoted using double quotes. To escape a double quote
inside an identifier, use another double quote, like "My ""very own"" identifier"
. All identifiers are case-sensitive
and no implicit case conversions are performed.
Literal strings should be quoted with single quotes, like 'foo'
. Literal strings with Unicode escapes can be written
like U&'fo\00F6'
, where character codes in hex are prefixed by a backslash. Literal numbers can be written in forms
like 100
(denoting an integer), 100.0
(denoting a floating point value), or 1.0e5
(scientific notation). Literal
timestamps can be written like TIMESTAMP '2000-01-01 00:00:00'
. Literal intervals, used for time arithmetic, can be
written like INTERVAL '1' HOUR
, INTERVAL '1 02:03' DAY TO MINUTE
, INTERVAL '1-2' YEAR TO MONTH
, and so on.
Dynamic parameters
Druid SQL supports dynamic parameters using question mark (?
) syntax, where parameters are bound to ?
placeholders
at execution time. To use dynamic parameters, replace any literal in the query with a ?
character and provide a
corresponding parameter value when you execute the query. Parameters are bound to the placeholders in the order in
which they are passed. Parameters are supported in both the HTTP POST and JDBC APIs.
In certain cases, using dynamic parameters in expressions can cause type inference issues which cause your query to fail, for example:
SELECT * FROM druid.foo WHERE dim1 like CONCAT('%', ?, '%')
To solve this issue, explicitly provide the type of the dynamic parameter using the CAST
keyword. Consider the fix for the preceding example:
SELECT * FROM druid.foo WHERE dim1 like CONCAT('%', CAST (? AS VARCHAR), '%')
Data types
Standard types
Druid natively supports five basic column types: "long" (64 bit signed int), "float" (32 bit float), "double" (64 bit float) "string" (UTF-8 encoded strings and string arrays), and "complex" (catch-all for more exotic data types like hyperUnique and approxHistogram columns).
Timestamps (including the __time
column) are treated by Druid as longs, with the value being the number of
milliseconds since 1970-01-01 00:00:00 UTC, not counting leap seconds. Therefore, timestamps in Druid do not carry any
timezone information, but only carry information about the exact moment in time they represent. See the
Time functions section for more information about timestamp handling.
The following table describes how Druid maps SQL types onto native types at query runtime. Casts between two SQL types
that have the same Druid runtime type will have no effect, other than exceptions noted in the table. Casts between two
SQL types that have different Druid runtime types will generate a runtime cast in Druid. If a value cannot be properly
cast to another value, as in CAST('foo' AS BIGINT)
, the runtime will substitute a default value. NULL values cast
to non-nullable types will also be substituted with a default value (for example, nulls cast to numbers will be
converted to zeroes).
SQL type | Druid runtime type | Default value | Notes |
---|---|---|---|
CHAR | STRING | '' |
|
VARCHAR | STRING | '' |
Druid STRING columns are reported as VARCHAR. Can include multi-value strings as well. |
DECIMAL | DOUBLE | 0.0 |
DECIMAL uses floating point, not fixed point math |
FLOAT | FLOAT | 0.0 |
Druid FLOAT columns are reported as FLOAT |
REAL | DOUBLE | 0.0 |
|
DOUBLE | DOUBLE | 0.0 |
Druid DOUBLE columns are reported as DOUBLE |
BOOLEAN | LONG | false |
|
TINYINT | LONG | 0 |
|
SMALLINT | LONG | 0 |
|
INTEGER | LONG | 0 |
|
BIGINT | LONG | 0 |
Druid LONG columns (except __time ) are reported as BIGINT |
TIMESTAMP | LONG | 0 , meaning 1970-01-01 00:00:00 UTC |
Druid's __time column is reported as TIMESTAMP. Casts between string and timestamp types assume standard SQL formatting, e.g. 2000-01-02 03:04:05 , not ISO8601 formatting. For handling other formats, use one of the time functions |
DATE | LONG | 0 , meaning 1970-01-01 |
Casting TIMESTAMP to DATE rounds down the timestamp to the nearest day. Casts between string and date types assume standard SQL formatting, e.g. 2000-01-02 . For handling other formats, use one of the time functions |
OTHER | COMPLEX | none | May represent various Druid column types such as hyperUnique, approxHistogram, etc |
Multi-value strings
Druid's native type system allows strings to potentially have multiple values. These
multi-value string dimensions will be reported in SQL as VARCHAR
typed, and can be
syntactically used like any other VARCHAR. Regular string functions that refer to multi-value string dimensions will be
applied to all values for each row individually. Multi-value string dimensions can also be treated as arrays via special
multi-value string functions, which can perform powerful array-aware operations.
Grouping by a multi-value expression will observe the native Druid multi-value aggregation behavior, which is similar to
the UNNEST
functionality available in some other SQL dialects. Refer to the documentation on
multi-value string dimensions for additional details.
Because multi-value dimensions are treated by the SQL planner as
VARCHAR
, there are some inconsistencies between how they are handled in Druid SQL and in native queries. For example, expressions involving multi-value dimensions may be incorrectly optimized by the Druid SQL planner:multi_val_dim = 'a' AND multi_val_dim = 'b'
will be optimized tofalse
, even though it is possible for a single row to have both "a" and "b" as values formulti_val_dim
. The SQL behavior of multi-value dimensions will change in a future release to more closely align with their behavior in native queries.
NULL values
The druid.generic.useDefaultValueForNull
runtime property
controls Druid's NULL handling mode.
In the default value mode (true
), Druid treats NULLs and empty strings interchangeably, rather than according to the SQL
standard. In this mode Druid SQL only has partial support for NULLs. For example, the expressions col IS NULL
and
col = ''
are equivalent, and both will evaluate to true if col
contains an empty string. Similarly, the expression
COALESCE(col1, col2)
will return col2
if col1
is an empty string. While the COUNT(*)
aggregator counts all rows,
the COUNT(expr)
aggregator will count the number of rows where expr is neither null nor the empty string. Numeric
columns in this mode are not nullable; any null or missing values will be treated as zeroes.
In SQL compatible mode (false
), NULLs are treated more closely to the SQL standard. The property affects both storage
and querying, so for correct behavior, it should be set on all Druid service types to be available at both ingestion
time and query time. There is some overhead associated with the ability to handle NULLs; see
the segment internals documentation for more details.
Aggregation functions
Aggregation functions can appear in the SELECT clause of any query. Any aggregator can be filtered using syntax
like AGG(expr) FILTER(WHERE whereExpr)
. Filtered aggregators will only aggregate rows that match their filter. It's
possible for two aggregators in the same SQL query to have different filters.
When no rows are selected, aggregate functions will return their initial value. This can occur when filtering results in no matches while aggregating values across an entire table without a grouping, or, when using filtered aggregations within a grouping. What this value is exactly varies per aggregator, but COUNT, and the various approximate count distinct sketch functions, will always return 0.
Only the COUNT, ARRAY_AGG, and STRING_AGG aggregations can accept the DISTINCT keyword.
The order of aggregation operations across segments is not deterministic. This means that non-commutative aggregation functions can produce inconsistent results across the same query.
Functions that operate on an input type of "float" or "double" may also see these differences in aggregation results across multiple query runs because of this. If precisely the same value is desired across multiple query runs, consider using the
ROUND
function to smooth out the inconsistencies between queries.
Function | Notes | Default |
---|---|---|
COUNT(*) |
Counts the number of rows. | 0 |
COUNT(DISTINCT expr) |
Counts distinct values of expr, which can be string, numeric, or hyperUnique. By default this is approximate, using a variant of HyperLogLog. To get exact counts set "useApproximateCountDistinct" to "false". If you do this, expr must be string or numeric, since exact counts are not possible using hyperUnique columns. See also APPROX_COUNT_DISTINCT(expr) . In exact mode, only one distinct count per query is permitted unless useGroupingSetForExactDistinct is set to true in query contexts or broker configurations. |
0 |
SUM(expr) |
Sums numbers. | null if druid.generic.useDefaultValueForNull=false , otherwise 0 |
MIN(expr) |
Takes the minimum of numbers. | null if druid.generic.useDefaultValueForNull=false , otherwise 9223372036854775807 (maximum LONG value) |
MAX(expr) |
Takes the maximum of numbers. | null if druid.generic.useDefaultValueForNull=false , otherwise -9223372036854775808 (minimum LONG value) |
AVG(expr) |
Averages numbers. | null if druid.generic.useDefaultValueForNull=false , otherwise 0 |
APPROX_COUNT_DISTINCT(expr) |
Counts distinct values of expr, which can be a regular column or a hyperUnique column. This is always approximate, regardless of the value of "useApproximateCountDistinct". This uses Druid's built-in "cardinality" or "hyperUnique" aggregators. See also COUNT(DISTINCT expr) . |
0 |
APPROX_COUNT_DISTINCT_DS_HLL(expr, [lgK, tgtHllType]) |
Counts distinct values of expr , which can be a regular column or an HLL sketch column. Results are always approximate, regardless of the value of useApproximateCountDistinct . The lgK and tgtHllType parameters here are, like the equivalents in the aggregator, described in the HLL sketch documentation. The DataSketches extension must be loaded to use this function. See also COUNT(DISTINCT expr) . |
0 |
APPROX_COUNT_DISTINCT_DS_THETA(expr, [size]) |
Counts distinct values of expr, which can be a regular column or a Theta sketch column. This is always approximate, regardless of the value of useApproximateCountDistinct . The size parameter is described in the Theta sketch documentation. The DataSketches extension must be loaded to use this function. See also COUNT(DISTINCT expr) . |
0 |
DS_HLL(expr, [lgK, tgtHllType]) |
Creates an HLL sketch on the values of expr, which can be a regular column or a column containing HLL sketches. The lgK and tgtHllType parameters are described in the HLL sketch documentation. The DataSketches extension must be loaded to use this function. |
'0' (STRING) |
DS_THETA(expr, [size]) |
Creates a Theta sketch on the values of expr, which can be a regular column or a column containing Theta sketches. The size parameter is described in the Theta sketch documentation. The DataSketches extension must be loaded to use this function. |
'0.0' (STRING) |
APPROX_QUANTILE(expr, probability, [resolution]) |
Computes approximate quantiles on numeric or approxHistogram exprs. The "probability" should be between 0 and 1 (exclusive). The "resolution" is the number of centroids to use for the computation. Higher resolutions will give more precise results but also have higher overhead. If not provided, the default resolution is 50. The approximate histogram extension must be loaded to use this function. | NaN |
APPROX_QUANTILE_DS(expr, probability, [k]) |
Computes approximate quantiles on numeric or Quantiles sketch exprs. The "probability" should be between 0 and 1 (exclusive). The k parameter is described in the Quantiles sketch documentation. The DataSketches extension must be loaded to use this function. |
NaN |
APPROX_QUANTILE_FIXED_BUCKETS(expr, probability, numBuckets, lowerLimit, upperLimit, [outlierHandlingMode]) |
Computes approximate quantiles on numeric or fixed buckets histogram exprs. The "probability" should be between 0 and 1 (exclusive). The numBuckets , lowerLimit , upperLimit , and outlierHandlingMode parameters are described in the fixed buckets histogram documentation. The approximate histogram extension must be loaded to use this function. |
0.0 |
DS_QUANTILES_SKETCH(expr, [k]) |
Creates a Quantiles sketch on the values of expr, which can be a regular column or a column containing quantiles sketches. The k parameter is described in the Quantiles sketch documentation. The DataSketches extension must be loaded to use this function. |
'0' (STRING) |
BLOOM_FILTER(expr, numEntries) |
Computes a bloom filter from values produced by expr , with numEntries maximum number of distinct values before false positive rate increases. See bloom filter extension documentation for additional details. |
Empty base64 encoded bloom filter STRING |
TDIGEST_QUANTILE(expr, quantileFraction, [compression]) |
Builds a T-Digest sketch on values produced by expr and returns the value for the quantile. Compression parameter (default value 100) determines the accuracy and size of the sketch. Higher compression means higher accuracy but more space to store sketches. See t-digest extension documentation for additional details. |
Double.NaN |
TDIGEST_GENERATE_SKETCH(expr, [compression]) |
Builds a T-Digest sketch on values produced by expr . Compression parameter (default value 100) determines the accuracy and size of the sketch Higher compression means higher accuracy but more space to store sketches. See t-digest extension documentation for additional details. |
Empty base64 encoded T-Digest sketch STRING |
VAR_POP(expr) |
Computes variance population of expr . See stats extension documentation for additional details. |
null if druid.generic.useDefaultValueForNull=false , otherwise 0 |
VAR_SAMP(expr) |
Computes variance sample of expr . See stats extension documentation for additional details. |
null if druid.generic.useDefaultValueForNull=false , otherwise 0 |
VARIANCE(expr) |
Computes variance sample of expr . See stats extension documentation for additional details. |
null if druid.generic.useDefaultValueForNull=false , otherwise 0 |
STDDEV_POP(expr) |
Computes standard deviation population of expr . See stats extension documentation for additional details. |
null if druid.generic.useDefaultValueForNull=false , otherwise 0 |
STDDEV_SAMP(expr) |
Computes standard deviation sample of expr . See stats extension documentation for additional details. |
null if druid.generic.useDefaultValueForNull=false , otherwise 0 |
STDDEV(expr) |
Computes standard deviation sample of expr . See stats extension documentation for additional details. |
null if druid.generic.useDefaultValueForNull=false , otherwise 0 |
EARLIEST(expr) |
Returns the earliest value of expr , which must be numeric. If expr comes from a relation with a timestamp column (like a Druid datasource) then "earliest" is the value first encountered with the minimum overall timestamp of all values being aggregated. If expr does not come from a relation with a timestamp, then it is simply the first value encountered. |
null if druid.generic.useDefaultValueForNull=false , otherwise 0 |
EARLIEST(expr, maxBytesPerString) |
Like EARLIEST(expr) , but for strings. The maxBytesPerString parameter determines how much aggregation space to allocate per string. Strings longer than this limit will be truncated. This parameter should be set as low as possible, since high values will lead to wasted memory. |
null if druid.generic.useDefaultValueForNull=false , otherwise '' |
LATEST(expr) |
Returns the latest value of expr , which must be numeric. If expr comes from a relation with a timestamp column (like a Druid datasource) then "latest" is the value last encountered with the maximum overall timestamp of all values being aggregated. If expr does not come from a relation with a timestamp, then it is simply the last value encountered. |
null if druid.generic.useDefaultValueForNull=false , otherwise 0 |
LATEST(expr, maxBytesPerString) |
Like LATEST(expr) , but for strings. The maxBytesPerString parameter determines how much aggregation space to allocate per string. Strings longer than this limit will be truncated. This parameter should be set as low as possible, since high values will lead to wasted memory. |
null if druid.generic.useDefaultValueForNull=false , otherwise '' |
ANY_VALUE(expr) |
Returns any value of expr including null. expr must be numeric. This aggregator can simplify and optimize the performance by returning the first encountered value (including null) |
null if druid.generic.useDefaultValueForNull=false , otherwise 0 |
ANY_VALUE(expr, maxBytesPerString) |
Like ANY_VALUE(expr) , but for strings. The maxBytesPerString parameter determines how much aggregation space to allocate per string. Strings longer than this limit will be truncated. This parameter should be set as low as possible, since high values will lead to wasted memory. |
null if druid.generic.useDefaultValueForNull=false , otherwise '' |
GROUPING(expr, expr...) |
Returns a number to indicate which groupBy dimension is included in a row, when using GROUPING SETS . Refer to additional documentation on how to infer this number. |
N/A |
ARRAY_AGG(expr, [size]) |
Collects all values of expr into an ARRAY, including null values, with size in bytes limit on aggregation size (default of 1024 bytes). If the aggregated array grows larger than the maximum size in bytes, the query will fail. Use of ORDER BY within the ARRAY_AGG expression is not currently supported, and the ordering of results within the output array may vary depending on processing order. |
null |
ARRAY_AGG(DISTINCT expr, [size]) |
Collects all distinct values of expr into an ARRAY, including null values, with size in bytes limit on aggregation size (default of 1024 bytes) per aggregate. If the aggregated array grows larger than the maximum size in bytes, the query will fail. Use of ORDER BY within the ARRAY_AGG expression is not currently supported, and the ordering of results within the output array may vary depending on processing order. |
null |
STRING_AGG(expr, separator, [size]) |
Collects all values of expr into a single STRING, ignoring null values. Each value is joined by the separator which must be a literal STRING. An optional size in bytes can be supplied to limit aggregation size (default of 1024 bytes). If the aggregated string grows larger than the maximum size in bytes, the query will fail. Use of ORDER BY within the STRING_AGG expression is not currently supported, and the ordering of results within the output string may vary depending on processing order. |
null if druid.generic.useDefaultValueForNull=false , otherwise '' |
STRING_AGG(DISTINCT expr, separator, [size]) |
Collects all distinct values of expr into a single STRING, ignoring null values. Each value is joined by the separator which must be a literal STRING. An optional size in bytes can be supplied to limit aggregation size (default of 1024 bytes). If the aggregated string grows larger than the maximum size in bytes, the query will fail. Use of ORDER BY within the STRING_AGG expression is not currently supported, and the ordering of results within the output string may vary depending on processing order. |
null if druid.generic.useDefaultValueForNull=false , otherwise '' |
BIT_AND(expr) |
Performs a bitwise AND operation on all input values. | null if druid.generic.useDefaultValueForNull=false , otherwise 0 |
BIT_OR(expr) |
Performs a bitwise OR operation on all input values. | null if druid.generic.useDefaultValueForNull=false , otherwise 0 |
BIT_XOR(expr) |
Performs a bitwise XOR operation on all input values. | null if druid.generic.useDefaultValueForNull=false , otherwise 0 |
For advice on choosing approximate aggregation functions, check out our approximate aggregations documentation.
Scalar functions
Numeric functions
For mathematical operations, Druid SQL will use integer math if all operands involved in an expression are integers. Otherwise, Druid will switch to floating point math. You can force this to happen by casting one of your operands to FLOAT. At runtime, Druid will widen 32-bit floats to 64-bit for most expressions.
Function | Notes |
---|---|
PI |
Constant Pi. |
ABS(expr) |
Absolute value. |
CEIL(expr) |
Ceiling. |
EXP(expr) |
e to the power of expr. |
FLOOR(expr) |
Floor. |
LN(expr) |
Logarithm (base e). |
LOG10(expr) |
Logarithm (base 10). |
POWER(expr, power) |
expr to a power. |
SQRT(expr) |
Square root. |
TRUNCATE(expr[, digits]) |
Truncate expr to a specific number of decimal digits. If digits is negative, then this truncates that many places to the left of the decimal point. Digits defaults to zero if not specified. |
TRUNC(expr[, digits]) |
Synonym for TRUNCATE . |
ROUND(expr[, digits]) |
ROUND(x, y) would return the value of the x rounded to the y decimal places. While x can be an integer or floating-point number, y must be an integer. The type of the return value is specified by that of x. y defaults to 0 if omitted. When y is negative, x is rounded on the left side of the y decimal points. If expr evaluates to either NaN , expr will be converted to 0. If expr is infinity, expr will be converted to the nearest finite double. |
x + y |
Addition. |
x - y |
Subtraction. |
x * y |
Multiplication. |
x / y |
Division. |
MOD(x, y) |
Modulo (remainder of x divided by y). |
SIN(expr) |
Trigonometric sine of an angle expr. |
COS(expr) |
Trigonometric cosine of an angle expr. |
TAN(expr) |
Trigonometric tangent of an angle expr. |
COT(expr) |
Trigonometric cotangent of an angle expr. |
ASIN(expr) |
Arc sine of expr. |
ACOS(expr) |
Arc cosine of expr. |
ATAN(expr) |
Arc tangent of expr. |
ATAN2(y, x) |
Angle theta from the conversion of rectangular coordinates (x, y) to polar * coordinates (r, theta). |
DEGREES(expr) |
Converts an angle measured in radians to an approximately equivalent angle measured in degrees |
RADIANS(expr) |
Converts an angle measured in degrees to an approximately equivalent angle measured in radians |
BITWISE_AND(expr1, expr2) |
Returns the result of expr1 & expr2 . Double values will be implicitly cast to longs, use BITWISE_CONVERT_DOUBLE_TO_LONG_BITS to perform bitwise operations directly with doubles |
BITWISE_COMPLEMENT(expr) |
Returns the result of ~expr . Double values will be implicitly cast to longs, use BITWISE_CONVERT_DOUBLE_TO_LONG_BITS to perform bitwise operations directly with doubles |
BITWISE_CONVERT_DOUBLE_TO_LONG_BITS(expr) |
Converts the bits of an IEEE 754 floating-point double value to a long. If the input is not a double, it is implicitly cast to a double prior to conversion |
BITWISE_CONVERT_LONG_BITS_TO_DOUBLE(expr) |
Converts a long to the IEEE 754 floating-point double specified by the bits stored in the long. If the input is not a long, it is implicitly cast to a long prior to conversion |
BITWISE_OR(expr1, expr2) |
Returns the result of expr1 [PIPE] expr2 . Double values will be implicitly cast to longs, use BITWISE_CONVERT_DOUBLE_TO_LONG_BITS to perform bitwise operations directly with doubles |
BITWISE_SHIFT_LEFT(expr1, expr2) |
Returns the result of expr1 << expr2 . Double values will be implicitly cast to longs, use BITWISE_CONVERT_DOUBLE_TO_LONG_BITS to perform bitwise operations directly with doubles |
BITWISE_SHIFT_RIGHT(expr1, expr2) |
Returns the result of expr1 >> expr2 . Double values will be implicitly cast to longs, use BITWISE_CONVERT_DOUBLE_TO_LONG_BITS to perform bitwise operations directly with doubles |
BITWISE_XOR(expr1, expr2) |
Returns the result of expr1 ^ expr2 . Double values will be implicitly cast to longs, use BITWISE_CONVERT_DOUBLE_TO_LONG_BITS to perform bitwise operations directly with doubles |
HUMAN_READABLE_BINARY_BYTE_FORMAT(value[, precision]) |
Format a number in human-readable IEC format. For example, HUMAN_READABLE_BINARY_BYTE_FORMAT(1048576) returns 1.00 MiB . precision must be in the range of [0,3] (default: 2). |
HUMAN_READABLE_DECIMAL_BYTE_FORMAT(value[, precision]) |
Format a number in human-readable SI format. HUMAN_READABLE_DECIMAL_BYTE_FORMAT(1048576) returns 1.04 MB . precision must be in the range of [0,3] (default: 2). precision must be in the range of [0,3] (default: 2). |
HUMAN_READABLE_DECIMAL_FORMAT(value[, precision]) |
Format a number in human-readable SI format. For example, HUMAN_READABLE_DECIMAL_FORMAT(1048576) returns 1.04 M . precision must be in the range of [0,3] (default: 2). |
String functions
String functions accept strings, and return a type appropriate to the function.
Function | Notes |
---|---|
x || y |
Concat strings x and y. |
CONCAT(expr, expr...) |
Concats a list of expressions. |
TEXTCAT(expr, expr) |
Two argument version of CONCAT. |
STRING_FORMAT(pattern[, args...]) |
Returns a string formatted in the manner of Java's String.format. |
LENGTH(expr) |
Length of expr in UTF-16 code units. |
CHAR_LENGTH(expr) |
Synonym for LENGTH . |
CHARACTER_LENGTH(expr) |
Synonym for LENGTH . |
STRLEN(expr) |
Synonym for LENGTH . |
LOOKUP(expr, lookupName) |
Look up expr in a registered query-time lookup table. Note that lookups can also be queried directly using the lookup schema. |
LOWER(expr) |
Returns expr in all lowercase. |
PARSE_LONG(string[, radix]) |
Parses a string into a long (BIGINT) with the given radix, or 10 (decimal) if a radix is not provided. |
POSITION(needle IN haystack [FROM fromIndex]) |
Returns the index of needle within haystack, with indexes starting from 1. The search will begin at fromIndex, or 1 if fromIndex is not specified. If the needle is not found, returns 0. |
REGEXP_EXTRACT(expr, pattern, [index]) |
Apply regular expression pattern to expr and extract a capture group, or NULL if there is no match. If index is unspecified or zero, returns the first substring that matched the pattern. The pattern may match anywhere inside expr ; if you want to match the entire string instead, use the ^ and $ markers at the start and end of your pattern. Note: when druid.generic.useDefaultValueForNull = true , it is not possible to differentiate an empty-string match from a non-match (both will return NULL ). |
REGEXP_LIKE(expr, pattern) |
Returns whether expr matches regular expression pattern . The pattern may match anywhere inside expr ; if you want to match the entire string instead, use the ^ and $ markers at the start and end of your pattern. Similar to LIKE , but uses regexps instead of LIKE patterns. Especially useful in WHERE clauses. |
CONTAINS_STRING(<expr>, str) |
Returns true if the str is a substring of expr . |
ICONTAINS_STRING(<expr>, str) |
Returns true if the str is a substring of expr . The match is case-insensitive. |
REPLACE(expr, pattern, replacement) |
Replaces pattern with replacement in expr, and returns the result. |
STRPOS(haystack, needle) |
Returns the index of needle within haystack, with indexes starting from 1. If the needle is not found, returns 0. |
SUBSTRING(expr, index, [length]) |
Returns a substring of expr starting at index, with a max length, both measured in UTF-16 code units. |
RIGHT(expr, [length]) |
Returns the rightmost length characters from expr. |
LEFT(expr, [length]) |
Returns the leftmost length characters from expr. |
SUBSTR(expr, index, [length]) |
Synonym for SUBSTRING. |
TRIM([BOTH | LEADING | TRAILING] [ FROM] expr) |
Returns expr with characters removed from the leading, trailing, or both ends of "expr" if they are in "chars". If "chars" is not provided, it defaults to " " (a space). If the directional argument is not provided, it defaults to "BOTH". |
BTRIM(expr[, chars]) |
Alternate form of TRIM(BOTH <chars> FROM <expr>) . |
LTRIM(expr[, chars]) |
Alternate form of TRIM(LEADING <chars> FROM <expr>) . |
RTRIM(expr[, chars]) |
Alternate form of TRIM(TRAILING <chars> FROM <expr>) . |
UPPER(expr) |
Returns expr in all uppercase. |
REVERSE(expr) |
Reverses expr. |
REPEAT(expr, [N]) |
Repeats expr N times |
LPAD(expr, length[, chars]) |
Returns a string of length from expr left-padded with chars . If length is shorter than the length of expr , the result is expr which is truncated to length . The result will be null if either expr or chars is null. If chars is an empty string, no padding is added, however expr may be trimmed if necessary. |
RPAD(expr, length[, chars]) |
Returns a string of length from expr right-padded with chars . If length is shorter than the length of expr , the result is expr which is truncated to length . The result will be null if either expr or chars is null. If chars is an empty string, no padding is added, however expr may be trimmed if necessary. |
Time functions
Time functions can be used with Druid's __time
column, with any column storing millisecond timestamps through use
of the MILLIS_TO_TIMESTAMP
function, or with any column storing string timestamps through use of the TIME_PARSE
function. By default, time operations use the UTC time zone. You can change the time zone by setting the connection
context parameter "sqlTimeZone" to the name of another time zone, like "America/Los_Angeles", or to an offset like
"-08:00". If you need to mix multiple time zones in the same query, or if you need to use a time zone other than
the connection time zone, some functions also accept time zones as parameters. These parameters always take precedence
over the connection time zone.
Literal timestamps in the connection time zone can be written using TIMESTAMP '2000-01-01 00:00:00'
syntax. The
simplest way to write literal timestamps in other time zones is to use TIME_PARSE, like
TIME_PARSE('2000-02-01 00:00:00', NULL, 'America/Los_Angeles')
.
Function | Notes |
---|---|
CURRENT_TIMESTAMP |
Current timestamp in the connection's time zone. |
CURRENT_DATE |
Current date in the connection's time zone. |
DATE_TRUNC(<unit>, <timestamp_expr>) |
Rounds down a timestamp, returning it as a new timestamp. Unit can be 'milliseconds', 'second', 'minute', 'hour', 'day', 'week', 'month', 'quarter', 'year', 'decade', 'century', or 'millennium'. |
TIME_CEIL(<timestamp_expr>, <period>, [<origin>, [<timezone>]]) |
Rounds up a timestamp, returning it as a new timestamp. Period can be any ISO8601 period, like P3M (quarters) or PT12H (half-days). The time zone, if provided, should be a time zone name like "America/Los_Angeles" or offset like "-08:00". This function is similar to CEIL but is more flexible. |
TIME_FLOOR(<timestamp_expr>, <period>, [<origin>, [<timezone>]]) |
Rounds down a timestamp, returning it as a new timestamp. Period can be any ISO8601 period, like P3M (quarters) or PT12H (half-days). The time zone, if provided, should be a time zone name like "America/Los_Angeles" or offset like "-08:00". This function is similar to FLOOR but is more flexible. |
TIME_SHIFT(<timestamp_expr>, <period>, <step>, [<timezone>]) |
Shifts a timestamp by a period (step times), returning it as a new timestamp. Period can be any ISO8601 period. Step may be negative. The time zone, if provided, should be a time zone name like "America/Los_Angeles" or offset like "-08:00". |
TIME_EXTRACT(<timestamp_expr>, [<unit>, [<timezone>]]) |
Extracts a time part from expr, returning it as a number. Unit can be EPOCH, SECOND, MINUTE, HOUR, DAY (day of month), DOW (day of week), DOY (day of year), WEEK (week of week year), MONTH (1 through 12), QUARTER (1 through 4), or YEAR. The time zone, if provided, should be a time zone name like "America/Los_Angeles" or offset like "-08:00". This function is similar to EXTRACT but is more flexible. Unit and time zone must be literals, and must be provided quoted, like TIME_EXTRACT(__time, 'HOUR') or TIME_EXTRACT(__time, 'HOUR', 'America/Los_Angeles') . |
TIME_PARSE(<string_expr>, [<pattern>, [<timezone>]]) |
Parses a string into a timestamp using a given Joda DateTimeFormat pattern, or ISO8601 (e.g. 2000-01-02T03:04:05Z ) if the pattern is not provided. The time zone, if provided, should be a time zone name like "America/Los_Angeles" or offset like "-08:00", and will be used as the time zone for strings that do not include a time zone offset. Pattern and time zone must be literals. Strings that cannot be parsed as timestamps will be returned as NULL. |
TIME_FORMAT(<timestamp_expr>, [<pattern>, [<timezone>]]) |
Formats a timestamp as a string with a given Joda DateTimeFormat pattern, or ISO8601 (e.g. 2000-01-02T03:04:05Z ) if the pattern is not provided. The time zone, if provided, should be a time zone name like "America/Los_Angeles" or offset like "-08:00". Pattern and time zone must be literals. |
MILLIS_TO_TIMESTAMP(millis_expr) |
Converts a number of milliseconds since the epoch into a timestamp. |
TIMESTAMP_TO_MILLIS(timestamp_expr) |
Converts a timestamp into a number of milliseconds since the epoch. |
EXTRACT(<unit> FROM timestamp_expr) |
Extracts a time part from expr, returning it as a number. Unit can be EPOCH, MICROSECOND, MILLISECOND, SECOND, MINUTE, HOUR, DAY (day of month), DOW (day of week), ISODOW (ISO day of week), DOY (day of year), WEEK (week of year), MONTH, QUARTER, YEAR, ISOYEAR, DECADE, CENTURY or MILLENNIUM. Units must be provided unquoted, like EXTRACT(HOUR FROM __time) . |
FLOOR(timestamp_expr TO <unit>) |
Rounds down a timestamp, returning it as a new timestamp. Unit can be SECOND, MINUTE, HOUR, DAY, WEEK, MONTH, QUARTER, or YEAR. |
CEIL(timestamp_expr TO <unit>) |
Rounds up a timestamp, returning it as a new timestamp. Unit can be SECOND, MINUTE, HOUR, DAY, WEEK, MONTH, QUARTER, or YEAR. |
TIMESTAMPADD(<unit>, <count>, <timestamp>) |
Equivalent to timestamp + count * INTERVAL '1' UNIT . |
TIMESTAMPDIFF(<unit>, <timestamp1>, <timestamp2>) |
Returns the (signed) number of unit between timestamp1 and timestamp2 . Unit can be SECOND, MINUTE, HOUR, DAY, WEEK, MONTH, QUARTER, or YEAR. |
timestamp_expr { + | - } <interval_expr> |
Add or subtract an amount of time from a timestamp. interval_expr can include interval literals like INTERVAL '2' HOUR , and may include interval arithmetic as well. This operator treats days as uniformly 86400 seconds long, and does not take into account daylight savings time. To account for daylight savings time, use TIME_SHIFT instead. |
Reduction functions
Reduction functions operate on zero or more expressions and return a single expression. If no expressions are passed as
arguments, then the result is NULL
. The expressions must all be convertible to a common data type, which will be the
type of the result:
- If all argument are
NULL
, the result isNULL
. Otherwise,NULL
arguments are ignored. - If the arguments comprise a mix of numbers and strings, the arguments are interpreted as strings.
- If all arguments are integer numbers, the arguments are interpreted as longs.
- If all arguments are numbers and at least one argument is a double, the arguments are interpreted as doubles.
Function | Notes |
---|---|
GREATEST([expr1, ...]) |
Evaluates zero or more expressions and returns the maximum value based on comparisons as described above. |
LEAST([expr1, ...]) |
Evaluates zero or more expressions and returns the minimum value based on comparisons as described above. |
IP address functions
For the IPv4 address functions, the address
argument can either be an IPv4 dotted-decimal string
(e.g., '192.168.0.1') or an IP address represented as an integer (e.g., 3232235521). The subnet
argument should be a string formatted as an IPv4 address subnet in CIDR notation (e.g.,
'192.168.0.0/16').
Function | Notes |
---|---|
IPV4_MATCH(address, subnet) |
Returns true if the address belongs to the subnet literal, else false. If address is not a valid IPv4 address, then false is returned. This function is more efficient if address is an integer instead of a string. |
IPV4_PARSE(address) |
Parses address into an IPv4 address stored as an integer . If address is an integer that is a valid IPv4 address, then it is passed through. Returns null if address cannot be represented as an IPv4 address. |
IPV4_STRINGIFY(address) |
Converts address into an IPv4 address dotted-decimal string. If address is a string that is a valid IPv4 address, then it is passed through. Returns null if address cannot be represented as an IPv4 address. |
Comparison operators
Function | Notes |
---|---|
x = y |
Equals. |
x <> y |
Not-equals. |
x > y |
Greater than. |
x >= y |
Greater than or equal to. |
x < y |
Less than. |
x <= y |
Less than or equal to. |
x BETWEEN y AND z |
Equivalent to x >= y AND x <= z . |
x NOT BETWEEN y AND z |
Equivalent to x < y OR x > z . |
x LIKE pattern [ESCAPE esc] |
True if x matches a SQL LIKE pattern (with an optional escape). |
x NOT LIKE pattern [ESCAPE esc] |
True if x does not match a SQL LIKE pattern (with an optional escape). |
x IS NULL |
True if x is NULL or empty string. |
x IS NOT NULL |
True if x is neither NULL nor empty string. |
x IS TRUE |
True if x is true. |
x IS NOT TRUE |
True if x is not true. |
x IS FALSE |
True if x is false. |
x IS NOT FALSE |
True if x is not false. |
x IN (values) |
True if x is one of the listed values. |
x NOT IN (values) |
True if x is not one of the listed values. |
x IN (subquery) |
True if x is returned by the subquery. This will be translated into a join; see Query translation for details. |
x NOT IN (subquery) |
True if x is not returned by the subquery. This will be translated into a join; see Query translation for details. |
x AND y |
Boolean AND. |
x OR y |
Boolean OR. |
NOT x |
Boolean NOT. |
Sketch functions
These functions operate on expressions or columns that return sketch objects.
HLL sketch functions
The following functions operate on DataSketches HLL sketches. The DataSketches extension must be loaded to use the following functions.
Function | Notes |
---|---|
HLL_SKETCH_ESTIMATE(expr, [round]) |
Returns the distinct count estimate from an HLL sketch. expr must return an HLL sketch. The optional round boolean parameter will round the estimate if set to true , with a default of false . |
HLL_SKETCH_ESTIMATE_WITH_ERROR_BOUNDS(expr, [numStdDev]) |
Returns the distinct count estimate and error bounds from an HLL sketch. expr must return an HLL sketch. An optional numStdDev argument can be provided. |
HLL_SKETCH_UNION([lgK, tgtHllType], expr0, expr1, ...) |
Returns a union of HLL sketches, where each input expression must return an HLL sketch. The lgK and tgtHllType can be optionally specified as the first parameter; if provided, both optional parameters must be specified. |
HLL_SKETCH_TO_STRING(expr) |
Returns a human-readable string representation of an HLL sketch for debugging. expr must return an HLL sketch. |
Theta sketch functions
The following functions operate on theta sketches. The DataSketches extension must be loaded to use the following functions.
Function | Notes |
---|---|
THETA_SKETCH_ESTIMATE(expr) |
Returns the distinct count estimate from a theta sketch. expr must return a theta sketch. |
THETA_SKETCH_ESTIMATE_WITH_ERROR_BOUNDS(expr, errorBoundsStdDev) |
Returns the distinct count estimate and error bounds from a theta sketch. expr must return a theta sketch. |
THETA_SKETCH_UNION([size], expr0, expr1, ...) |
Returns a union of theta sketches, where each input expression must return a theta sketch. The size can be optionally specified as the first parameter. |
THETA_SKETCH_INTERSECT([size], expr0, expr1, ...) |
Returns an intersection of theta sketches, where each input expression must return a theta sketch. The size can be optionally specified as the first parameter. |
THETA_SKETCH_NOT([size], expr0, expr1, ...) |
Returns a set difference of theta sketches, where each input expression must return a theta sketch. The size can be optionally specified as the first parameter. |
Quantiles sketch functions
The following functions operate on quantiles sketches. The DataSketches extension must be loaded to use the following functions.
Function | Notes |
---|---|
DS_GET_QUANTILE(expr, fraction) |
Returns the quantile estimate corresponding to fraction from a quantiles sketch. expr must return a quantiles sketch. |
DS_GET_QUANTILES(expr, fraction0, fraction1, ...) |
Returns a string representing an array of quantile estimates corresponding to a list of fractions from a quantiles sketch. expr must return a quantiles sketch. |
DS_HISTOGRAM(expr, splitPoint0, splitPoint1, ...) |
Returns a string representing an approximation to the histogram given a list of split points that define the histogram bins from a quantiles sketch. expr must return a quantiles sketch. |
DS_CDF(expr, splitPoint0, splitPoint1, ...) |
Returns a string representing approximation to the Cumulative Distribution Function given a list of split points that define the edges of the bins from a quantiles sketch. expr must return a quantiles sketch. |
DS_RANK(expr, value) |
Returns an approximation to the rank of a given value that is the fraction of the distribution less than that value from a quantiles sketch. expr must return a quantiles sketch. |
DS_QUANTILE_SUMMARY(expr) |
Returns a string summary of a quantiles sketch, useful for debugging. expr must return a quantiles sketch. |
Other scalar functions
Function | Notes |
---|---|
CAST(value AS TYPE) |
Cast value to another type. See Data types for details about how Druid SQL handles CAST. |
CASE expr WHEN value1 THEN result1 \[ WHEN value2 THEN result2 ... \] \[ ELSE resultN \] END |
Simple CASE. |
CASE WHEN boolean_expr1 THEN result1 \[ WHEN boolean_expr2 THEN result2 ... \] \[ ELSE resultN \] END |
Searched CASE. |
NULLIF(value1, value2) |
Returns NULL if value1 and value2 match, else returns value1. |
COALESCE(value1, value2, ...) |
Returns the first value that is neither NULL nor empty string. |
NVL(expr,expr-for-null) |
Returns 'expr-for-null' if 'expr' is null (or empty string for string type). |
BLOOM_FILTER_TEST(<expr>, <serialized-filter>) |
Returns true if the value is contained in a Base64-serialized bloom filter. See the Bloom filter extension documentation for additional details. |
Multi-value string functions
All 'array' references in the multi-value string function documentation can refer to multi-value string columns or
ARRAY
literals.
Function | Notes |
---|---|
ARRAY[expr1,expr ...] |
constructs a SQL ARRAY literal from the expression arguments, using the type of the first argument as the output array type |
MV_LENGTH(arr) |
returns length of array expression |
MV_OFFSET(arr,long) |
returns the array element at the 0 based index supplied, or null for an out of range index |
MV_ORDINAL(arr,long) |
returns the array element at the 1 based index supplied, or null for an out of range index |
MV_CONTAINS(arr,expr) |
returns 1 if the array contains the element specified by expr, or contains all elements specified by expr if expr is an array, else 0 |
MV_OVERLAP(arr1,arr2) |
returns 1 if arr1 and arr2 have any elements in common, else 0 |
MV_OFFSET_OF(arr,expr) |
returns the 0 based index of the first occurrence of expr in the array, or -1 or null if druid.generic.useDefaultValueForNull=false if no matching elements exist in the array. |
MV_ORDINAL_OF(arr,expr) |
returns the 1 based index of the first occurrence of expr in the array, or -1 or null if druid.generic.useDefaultValueForNull=false if no matching elements exist in the array. |
MV_PREPEND(expr,arr) |
adds expr to arr at the beginning, the resulting array type determined by the type of the array |
MV_APPEND(arr1,expr) |
appends expr to arr, the resulting array type determined by the type of the first array |
MV_CONCAT(arr1,arr2) |
concatenates 2 arrays, the resulting array type determined by the type of the first array |
MV_SLICE(arr,start,end) |
return the subarray of arr from the 0 based index start(inclusive) to end(exclusive), or null , if start is less than 0, greater than length of arr or less than end |
MV_TO_STRING(arr,str) |
joins all elements of arr by the delimiter specified by str |
STRING_TO_MV(str1,str2) |
splits str1 into an array on the delimiter specified by str2 |
Query translation
Druid SQL translates SQL queries to native queries before running them, and understanding how this translation works is key to getting good performance.
Best practices
Consider this (non-exhaustive) list of things to look out for when looking into the performance implications of how your SQL queries are translated to native queries.
-
If you wrote a filter on the primary time column
__time
, make sure it is being correctly translated to an"intervals"
filter, as described in the Time filters section below. If not, you may need to change the way you write the filter. -
Try to avoid subqueries underneath joins: they affect both performance and scalability. This includes implicit subqueries generated by conditions on mismatched types, and implicit subqueries generated by conditions that use expressions to refer to the right-hand side.
-
Currently, Druid does not support pushing down predicates (condition and filter) past a Join (i.e. into Join's children). Druid only supports pushing predicates into the join if they originated from above the join. Hence, the location of predicates and filters in your Druid SQL is very important. Also, as a result of this, comma joins should be avoided.
-
Read through the Query execution page to understand how various types of native queries will be executed.
-
Be careful when interpreting EXPLAIN PLAN output, and use request logging if in doubt. Request logs will show the exact native query that was run. See the next section for more details.
-
If you encounter a query that could be planned better, feel free to raise an issue on GitHub. A reproducible test case is always appreciated.
Interpreting EXPLAIN PLAN output
The EXPLAIN PLAN functionality can help you understand how a given SQL query will be translated to native. For simple queries that do not involve subqueries or joins, the output of EXPLAIN PLAN is easy to interpret. The native query that will run is embedded as JSON inside a "DruidQueryRel" line:
> EXPLAIN PLAN FOR SELECT COUNT(*) FROM wikipedia
DruidQueryRel(query=[{"queryType":"timeseries","dataSource":"wikipedia","intervals":"-146136543-09-08T08:23:32.096Z/146140482-04-24T15:36:27.903Z","granularity":"all","aggregations":[{"type":"count","name":"a0"}]}], signature=[{a0:LONG}])
For more complex queries that do involve subqueries or joins, EXPLAIN PLAN is somewhat more difficult to interpret. For example, consider this query:
> EXPLAIN PLAN FOR
> SELECT
> channel,
> COUNT(*)
> FROM wikipedia
> WHERE channel IN (SELECT page FROM wikipedia GROUP BY page ORDER BY COUNT(*) DESC LIMIT 10)
> GROUP BY channel
DruidJoinQueryRel(condition=[=($1, $3)], joinType=[inner], query=[{"queryType":"groupBy","dataSource":{"type":"table","name":"__join__"},"intervals":{"type":"intervals","intervals":["-146136543-09-08T08:23:32.096Z/146140482-04-24T15:36:27.903Z"]},"granularity":"all","dimensions":["channel"],"aggregations":[{"type":"count","name":"a0"}]}], signature=[{d0:STRING, a0:LONG}])
DruidQueryRel(query=[{"queryType":"scan","dataSource":{"type":"table","name":"wikipedia"},"intervals":{"type":"intervals","intervals":["-146136543-09-08T08:23:32.096Z/146140482-04-24T15:36:27.903Z"]},"resultFormat":"compactedList","columns":["__time","channel","page"],"granularity":"all"}], signature=[{__time:LONG, channel:STRING, page:STRING}])
DruidQueryRel(query=[{"queryType":"topN","dataSource":{"type":"table","name":"wikipedia"},"dimension":"page","metric":{"type":"numeric","metric":"a0"},"threshold":10,"intervals":{"type":"intervals","intervals":["-146136543-09-08T08:23:32.096Z/146140482-04-24T15:36:27.903Z"]},"granularity":"all","aggregations":[{"type":"count","name":"a0"}]}], signature=[{d0:STRING}])
Here, there is a join with two inputs. The way to read this is to consider each line of the EXPLAIN PLAN output as
something that might become a query, or might just become a simple datasource. The query
field they all have is
called a "partial query" and represents what query would be run on the datasource represented by that line, if that
line ran by itself. In some cases — like the "scan" query in the second line of this example — the query does not
actually run, and it ends up being translated to a simple table datasource. See the Join translation section
for more details about how this works.
We can see this for ourselves using Druid's request logging feature. After enabling logging and running this query, we can see that it actually runs as the following native query.
{
"queryType": "groupBy",
"dataSource": {
"type": "join",
"left": "wikipedia",
"right": {
"type": "query",
"query": {
"queryType": "topN",
"dataSource": "wikipedia",
"dimension": {"type": "default", "dimension": "page", "outputName": "d0"},
"metric": {"type": "numeric", "metric": "a0"},
"threshold": 10,
"intervals": "-146136543-09-08T08:23:32.096Z/146140482-04-24T15:36:27.903Z",
"granularity": "all",
"aggregations": [
{ "type": "count", "name": "a0"}
]
}
},
"rightPrefix": "j0.",
"condition": "(\"page\" == \"j0.d0\")",
"joinType": "INNER"
},
"intervals": "-146136543-09-08T08:23:32.096Z/146140482-04-24T15:36:27.903Z",
"granularity": "all",
"dimensions": [
{"type": "default", "dimension": "channel", "outputName": "d0"}
],
"aggregations": [
{ "type": "count", "name": "a0"}
]
}
Query types
Druid SQL uses four different native query types.
-
Scan is used for queries that do not aggregate (no GROUP BY, no DISTINCT).
-
Timeseries is used for queries that GROUP BY
FLOOR(__time TO <unit>)
orTIME_FLOOR(__time, period)
, have no other grouping expressions, no HAVING or LIMIT clauses, no nesting, and either no ORDER BY, or an ORDER BY that orders by same expression as present in GROUP BY. It also uses Timeseries for "grand total" queries that have aggregation functions but no GROUP BY. This query type takes advantage of the fact that Druid segments are sorted by time. -
TopN is used by default for queries that group by a single expression, do have ORDER BY and LIMIT clauses, do not have HAVING clauses, and are not nested. However, the TopN query type will deliver approximate ranking and results in some cases; if you want to avoid this, set "useApproximateTopN" to "false". TopN results are always computed in memory. See the TopN documentation for more details.
-
GroupBy is used for all other aggregations, including any nested aggregation queries. Druid's GroupBy is a traditional aggregation engine: it delivers exact results and rankings and supports a wide variety of features. GroupBy aggregates in memory if it can, but it may spill to disk if it doesn't have enough memory to complete your query. Results are streamed back from data processes through the Broker if you ORDER BY the same expressions in your GROUP BY clause, or if you don't have an ORDER BY at all. If your query has an ORDER BY referencing expressions that don't appear in the GROUP BY clause (like aggregation functions) then the Broker will materialize a list of results in memory, up to a max of your LIMIT, if any. See the GroupBy documentation for details about tuning performance and memory use.
Time filters
For all native query types, filters on the __time
column will be translated into top-level query "intervals" whenever
possible, which allows Druid to use its global time index to quickly prune the set of data that must be scanned.
Consider this (non-exhaustive) list of time filters that will be recognized and translated to "intervals":
__time >= TIMESTAMP '2000-01-01 00:00:00'
(comparison to absolute time)__time >= CURRENT_TIMESTAMP - INTERVAL '8' HOUR
(comparison to relative time)FLOOR(__time TO DAY) = TIMESTAMP '2000-01-01 00:00:00'
(specific day)
Refer to the Interpreting EXPLAIN PLAN output section for details on confirming that time filters are being translated as you expect.
Joins
SQL join operators are translated to native join datasources as follows:
-
Joins that the native layer can handle directly are translated literally, to a join datasource whose
left
,right
, andcondition
are faithful translations of the original SQL. This includes any SQL join where the right-hand side is a lookup or subquery, and where the condition is an equality where one side is an expression based on the left-hand table, the other side is a simple column reference to the right-hand table, and both sides of the equality are the same data type. -
If a join cannot be handled directly by a native join datasource as written, Druid SQL will insert subqueries to make it runnable. For example,
foo INNER JOIN bar ON foo.abc = LOWER(bar.def)
cannot be directly translated, because there is an expression on the right-hand side instead of a simple column access. A subquery will be inserted that effectively transforms this clause tofoo INNER JOIN (SELECT LOWER(def) AS def FROM bar) t ON foo.abc = t.def
. -
Druid SQL does not currently reorder joins to optimize queries.
Refer to the Interpreting EXPLAIN PLAN output section for details on confirming that joins are being translated as you expect.
Refer to the Query execution page for information about how joins are executed.
Subqueries
Subqueries in SQL are generally translated to native query datasources. Refer to the Query execution page for information about how subqueries are executed.
Note: Subqueries in the WHERE clause, like
WHERE col1 IN (SELECT foo FROM ...)
are translated to inner joins.
Approximations
Druid SQL will use approximate algorithms in some situations:
-
The
COUNT(DISTINCT col)
aggregation functions by default uses a variant of HyperLogLog, a fast approximate distinct counting algorithm. Druid SQL will switch to exact distinct counts if you set "useApproximateCountDistinct" to "false", either through query context or through Broker configuration. -
GROUP BY queries over a single column with ORDER BY and LIMIT may be executed using the TopN engine, which uses an approximate algorithm. Druid SQL will switch to an exact grouping algorithm if you set "useApproximateTopN" to "false", either through query context or through Broker configuration.
-
Aggregation functions that are labeled as using sketches or approximations, such as APPROX_COUNT_DISTINCT, are always approximate, regardless of configuration.
Unsupported features
Druid does not support all SQL features. In particular, the following features are not supported.
- JOIN between native datasources (table, lookup, subquery) and system tables.
- JOIN conditions that are not an equality between expressions from the left- and right-hand sides.
- JOIN conditions containing a constant value inside the condition.
- JOIN conditions on a column which contains a multi-value dimension.
- OVER clauses, and analytic functions such as
LAG
andLEAD
. - ORDER BY for a non-aggregating query, except for
ORDER BY __time
orORDER BY __time DESC
, which are supported. This restriction only applies to non-aggregating queries; you can ORDER BY any column in an aggregating query. - DDL and DML.
- Using Druid-specific functions like
TIME_PARSE
andAPPROX_QUANTILE_DS
on system tables.
Additionally, some Druid native query features are not supported by the SQL language. Some unsupported Druid features include:
- Inline datasources.
- Spatial filters.
- Query cancellation.
- Multi-value dimensions are only partially implemented in Druid SQL. There are known inconsistencies between their behavior in SQL queries and in native queries due to how they are currently treated by the SQL planner.
Client APIs
HTTP POST
You can make Druid SQL queries using HTTP via POST to the endpoint /druid/v2/sql/
. The request should
be a JSON object with a "query" field, like {"query" : "SELECT COUNT(*) FROM data_source WHERE foo = 'bar'"}
.
Request
Property | Description | Default |
---|---|---|
query |
SQL query string. | none (required) |
resultFormat |
Format of query results. See Responses for details. | "object" |
header |
Whether or not to include a header. See [Responses] for details. | false |
context |
JSON object containing connection context parameters. | {} (empty) |
parameters |
List of query parameters for parameterized queries. Each parameter in the list should be a JSON object like {"type": "VARCHAR", "value": "foo"} . The type should be a SQL type; see Data types for a list of supported SQL types. |
[] (empty) |
You can use curl to send SQL queries from the command-line:
$ cat query.json
{"query":"SELECT COUNT(*) AS TheCount FROM data_source"}
$ curl -XPOST -H'Content-Type: application/json' http://BROKER:8082/druid/v2/sql/ -d @query.json
[{"TheCount":24433}]
There are a variety of connection context parameters you can provide by adding a "context" map, like:
{
"query" : "SELECT COUNT(*) FROM data_source WHERE foo = 'bar' AND __time > TIMESTAMP '2000-01-01 00:00:00'",
"context" : {
"sqlTimeZone" : "America/Los_Angeles"
}
}
Parameterized SQL queries are also supported:
{
"query" : "SELECT COUNT(*) FROM data_source WHERE foo = ? AND __time > ?",
"parameters": [
{ "type": "VARCHAR", "value": "bar"},
{ "type": "TIMESTAMP", "value": "2000-01-01 00:00:00" }
]
}
Metadata is available over HTTP POST by querying metadata tables.
Responses
Druid SQL's HTTP POST API supports a variety of result formats. You can specify these by adding a "resultFormat" parameter, like:
{
"query" : "SELECT COUNT(*) FROM data_source WHERE foo = 'bar' AND __time > TIMESTAMP '2000-01-01 00:00:00'",
"resultFormat" : "object"
}
The supported result formats are:
Format | Description | Content-Type |
---|---|---|
object |
The default, a JSON array of JSON objects. Each object's field names match the columns returned by the SQL query, and are provided in the same order as the SQL query. | application/json |
array |
JSON array of JSON arrays. Each inner array has elements matching the columns returned by the SQL query, in order. | application/json |
objectLines |
Like "object", but the JSON objects are separated by newlines instead of being wrapped in a JSON array. This can make it easier to parse the entire response set as a stream, if you do not have ready access to a streaming JSON parser. To make it possible to detect a truncated response, this format includes a trailer of one blank line. | text/plain |
arrayLines |
Like "array", but the JSON arrays are separated by newlines instead of being wrapped in a JSON array. This can make it easier to parse the entire response set as a stream, if you do not have ready access to a streaming JSON parser. To make it possible to detect a truncated response, this format includes a trailer of one blank line. | text/plain |
csv |
Comma-separated values, with one row per line. Individual field values may be escaped by being surrounded in double quotes. If double quotes appear in a field value, they will be escaped by replacing them with double-double-quotes like ""this"" . To make it possible to detect a truncated response, this format includes a trailer of one blank line. |
text/csv |
You can additionally request a header by setting "header" to true in your request, like:
{
"query" : "SELECT COUNT(*) FROM data_source WHERE foo = 'bar' AND __time > TIMESTAMP '2000-01-01 00:00:00'",
"resultFormat" : "arrayLines",
"header" : true
}
In this case, the first result returned will be a header. For the csv
, array
, and arrayLines
formats, the header
will be a list of column names. For the object
and objectLines
formats, the header will be an object where the
keys are column names, and the values are null.
Errors that occur before the response body is sent will be reported in JSON, with an HTTP 500 status code, in the same format as native Druid query errors. If an error occurs while the response body is being sent, at that point it is too late to change the HTTP status code or report a JSON error, so the response will simply end midstream and an error will be logged by the Druid server that was handling your request.
As a caller, it is important that you properly handle response truncation. This is easy for the "object" and "array" formats, since truncated responses will be invalid JSON. For the line-oriented formats, you should check the trailer they all include: one blank line at the end of the result set. If you detect a truncated response, either through a JSON parsing error or through a missing trailing newline, you should assume the response was not fully delivered due to an error.
JDBC
You can make Druid SQL queries using the Avatica JDBC driver. We recommend using Avatica JDBC driver version 1.17.0 or later. Note that as of the time of this writing, Avatica 1.17.0, the latest version, does not support passing connection string parameters from the URL to Druid, so you must pass them using a Properties
object. Once you've downloaded the Avatica client jar, add it to your classpath and use the connect string jdbc:avatica:remote:url=http://BROKER:8082/druid/v2/sql/avatica/
.
Example code:
// Connect to /druid/v2/sql/avatica/ on your Broker.
String url = "jdbc:avatica:remote:url=http://localhost:8082/druid/v2/sql/avatica/";
// Set any connection context parameters you need here (see "Connection context" below).
// Or leave empty for default behavior.
Properties connectionProperties = new Properties();
try (Connection connection = DriverManager.getConnection(url, connectionProperties)) {
try (
final Statement statement = connection.createStatement();
final ResultSet resultSet = statement.executeQuery(query)
) {
while (resultSet.next()) {
// process result set
}
}
}
It is also possible to use a protocol buffers JDBC connection with Druid, this offer reduced bloat and potential performance improvements for larger result sets. To use it apply the following connection url instead, everything else remains the same
String url = "jdbc:avatica:remote:url=http://localhost:8082/druid/v2/sql/avatica-protobuf/;serialization=protobuf";
The protobuf endpoint is also known to work with the official Golang Avatica driver
Table metadata is available over JDBC using connection.getMetaData()
or by querying the
"INFORMATION_SCHEMA" tables.
Connection stickiness
Druid's JDBC server does not share connection state between Brokers. This means that if you're using JDBC and have multiple Druid Brokers, you should either connect to a specific Broker, or use a load balancer with sticky sessions enabled. The Druid Router process provides connection stickiness when balancing JDBC requests, and can be used to achieve the necessary stickiness even with a normal non-sticky load balancer. Please see the Router documentation for more details.
Note that the non-JDBC JSON over HTTP API is stateless and does not require stickiness.
Dynamic Parameters
You can also use parameterized queries in JDBC code, as in this example;
PreparedStatement statement = connection.prepareStatement("SELECT COUNT(*) AS cnt FROM druid.foo WHERE dim1 = ? OR dim1 = ?");
statement.setString(1, "abc");
statement.setString(2, "def");
final ResultSet resultSet = statement.executeQuery();
Connection context
Druid SQL supports setting connection parameters on the client. The parameters in the table below affect SQL planning. All other context parameters you provide will be attached to Druid queries and can affect how they run. See Query context for details on the possible options.
String url = "jdbc:avatica:remote:url=http://localhost:8082/druid/v2/sql/avatica/";
// Set any query context parameters you need here.
Properties connectionProperties = new Properties();
connectionProperties.setProperty("sqlTimeZone", "America/Los_Angeles");
connectionProperties.setProperty("useCache", "false");
try (Connection connection = DriverManager.getConnection(url, connectionProperties)) {
// create and execute statements, process result sets, etc
}
Note that to specify an unique identifier for SQL query, use sqlQueryId
instead of queryId
. Setting queryId
for a SQL
request has no effect, all native queries underlying SQL will use auto-generated queryId.
Connection context can be specified as JDBC connection properties or as a "context" object in the JSON API.
Parameter | Description | Default value |
---|---|---|
sqlQueryId |
Unique identifier given to this SQL query. For HTTP client, it will be returned in X-Druid-SQL-Query-Id header. |
auto-generated |
sqlTimeZone |
Sets the time zone for this connection, which will affect how time functions and timestamp literals behave. Should be a time zone name like "America/Los_Angeles" or offset like "-08:00". | druid.sql.planner.sqlTimeZone on the Broker (default: UTC) |
sqlStringifyArrays |
When set to true, result columns which return array values will be serialized into a JSON string in the response instead of as an array (default: true, except for JDBC connections, where it is always false) | |
useApproximateCountDistinct |
Whether to use an approximate cardinality algorithm for COUNT(DISTINCT foo) . |
druid.sql.planner.useApproximateCountDistinct on the Broker (default: true) |
useGroupingSetForExactDistinct |
Whether to use grouping sets to execute queries with multiple exact distinct aggregations. | druid.sql.planner.useGroupingSetForExactDistinct on the Broker (default: false) |
useApproximateTopN |
Whether to use approximate TopN queries when a SQL query could be expressed as such. If false, exact GroupBy queries will be used instead. | druid.sql.planner.useApproximateTopN on the Broker (default: true) |
Metadata tables
Druid Brokers infer table and column metadata for each datasource from segments loaded in the cluster, and use this to plan SQL queries. This metadata is cached on Broker startup and also updated periodically in the background through SegmentMetadata queries. Background metadata refreshing is triggered by segments entering and exiting the cluster, and can also be throttled through configuration.
Druid exposes system information through special system tables. There are two such schemas available: Information Schema and Sys Schema. Information schema provides details about table and column types. The "sys" schema provides information about Druid internals like segments/tasks/servers.
INFORMATION SCHEMA
You can access table and column metadata through JDBC using connection.getMetaData()
, or through the
INFORMATION_SCHEMA tables described below. For example, to retrieve metadata for the Druid
datasource "foo", use the query:
SELECT * FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_SCHEMA = 'druid' AND TABLE_NAME = 'foo'
Note: INFORMATION_SCHEMA tables do not currently support Druid-specific functions like
TIME_PARSE
andAPPROX_QUANTILE_DS
. Only standard SQL functions can be used.
SCHEMATA table
INFORMATION_SCHEMA.SCHEMATA
provides a list of all known schemas, which include druid
for standard Druid Table datasources, lookup
for Lookups, sys
for the virtual System metadata tables, and INFORMATION_SCHEMA
for these virtual tables. Tables are allowed to have the same name across different schemas, so the schema may be included in an SQL statement to distinguish them, e.g. lookup.table
vs druid.table
.
Column | Notes |
---|---|
CATALOG_NAME | Always set as druid |
SCHEMA_NAME | druid , lookup , sys , or INFORMATION_SCHEMA |
SCHEMA_OWNER | Unused |
DEFAULT_CHARACTER_SET_CATALOG | Unused |
DEFAULT_CHARACTER_SET_SCHEMA | Unused |
DEFAULT_CHARACTER_SET_NAME | Unused |
SQL_PATH | Unused |
TABLES table
INFORMATION_SCHEMA.TABLES
provides a list of all known tables and schemas.
Column | Notes |
---|---|
TABLE_CATALOG | Always set as druid |
TABLE_SCHEMA | The 'schema' which the table falls under, see SCHEMATA table for details |
TABLE_NAME | Table name. For the druid schema, this is the dataSource . |
TABLE_TYPE | "TABLE" or "SYSTEM_TABLE" |
IS_JOINABLE | If a table is directly joinable if on the right hand side of a JOIN statement, without performing a subquery, this value will be set to YES , otherwise NO . Lookups are always joinable because they are globally distributed among Druid query processing nodes, but Druid datasources are not, and will use a less efficient subquery join. |
IS_BROADCAST | If a table is 'broadcast' and distributed among all Druid query processing nodes, this value will be set to YES , such as lookups and Druid datasources which have a 'broadcast' load rule, else NO . |
COLUMNS table
INFORMATION_SCHEMA.COLUMNS
provides a list of all known columns across all tables and schema.
Column | Notes |
---|---|
TABLE_CATALOG | Always set as druid |
TABLE_SCHEMA | The 'schema' which the table column falls under, see SCHEMATA table for details |
TABLE_NAME | The 'table' which the column belongs to, see TABLES table for details |
COLUMN_NAME | The column name |
ORDINAL_POSITION | The order in which the column is stored in a table |
COLUMN_DEFAULT | Unused |
IS_NULLABLE | |
DATA_TYPE | |
CHARACTER_MAXIMUM_LENGTH | Unused |
CHARACTER_OCTET_LENGTH | Unused |
NUMERIC_PRECISION | |
NUMERIC_PRECISION_RADIX | |
NUMERIC_SCALE | |
DATETIME_PRECISION | |
CHARACTER_SET_NAME | |
COLLATION_NAME | |
JDBC_TYPE | Type code from java.sql.Types (Druid extension) |
SYSTEM SCHEMA
The "sys" schema provides visibility into Druid segments, servers and tasks.
Note: "sys" tables do not currently support Druid-specific functions like
TIME_PARSE
andAPPROX_QUANTILE_DS
. Only standard SQL functions can be used.
SEGMENTS table
Segments table provides details on all Druid segments, whether they are published yet or not.
Column | Type | Notes |
---|---|---|
segment_id | STRING | Unique segment identifier |
datasource | STRING | Name of datasource |
start | STRING | Interval start time (in ISO 8601 format) |
end | STRING | Interval end time (in ISO 8601 format) |
size | LONG | Size of segment in bytes |
version | STRING | Version string (generally an ISO8601 timestamp corresponding to when the segment set was first started). Higher version means the more recently created segment. Version comparing is based on string comparison. |
partition_num | LONG | Partition number (an integer, unique within a datasource+interval+version; may not necessarily be contiguous) |
num_replicas | LONG | Number of replicas of this segment currently being served |
num_rows | LONG | Number of rows in current segment, this value could be null if unknown to Broker at query time |
is_published | LONG | Boolean is represented as long type where 1 = true, 0 = false. 1 represents this segment has been published to the metadata store with used=1 . See the Architecture page for more details. |
is_available | LONG | Boolean is represented as long type where 1 = true, 0 = false. 1 if this segment is currently being served by any process(Historical or realtime). See the Architecture page for more details. |
is_realtime | LONG | Boolean is represented as long type where 1 = true, 0 = false. 1 if this segment is only served by realtime tasks, and 0 if any historical process is serving this segment. |
is_overshadowed | LONG | Boolean is represented as long type where 1 = true, 0 = false. 1 if this segment is published and is fully overshadowed by some other published segments. Currently, is_overshadowed is always false for unpublished segments, although this may change in the future. You can filter for segments that "should be published" by filtering for is_published = 1 AND is_overshadowed = 0 . Segments can briefly be both published and overshadowed if they were recently replaced, but have not been unpublished yet. See the Architecture page for more details. |
shard_spec | STRING | JSON-serialized form of the segment ShardSpec |
dimensions | STRING | JSON-serialized form of the segment dimensions |
metrics | STRING | JSON-serialized form of the segment metrics |
last_compaction_state | STRING | JSON-serialized form of the compaction task's config (compaction task which created this segment). May be null if segment was not created by compaction task. |
For example to retrieve all segments for datasource "wikipedia", use the query:
SELECT * FROM sys.segments WHERE datasource = 'wikipedia'
Another example to retrieve segments total_size, avg_size, avg_num_rows and num_segments per datasource:
SELECT
datasource,
SUM("size") AS total_size,
CASE WHEN SUM("size") = 0 THEN 0 ELSE SUM("size") / (COUNT(*) FILTER(WHERE "size" > 0)) END AS avg_size,
CASE WHEN SUM(num_rows) = 0 THEN 0 ELSE SUM("num_rows") / (COUNT(*) FILTER(WHERE num_rows > 0)) END AS avg_num_rows,
COUNT(*) AS num_segments
FROM sys.segments
GROUP BY 1
ORDER BY 2 DESC
If you want to retrieve segment that was compacted (ANY compaction):
SELECT * FROM sys.segments WHERE last_compaction_state is not null
or if you want to retrieve segment that was compacted only by a particular compaction spec (such as that of the auto compaction):
SELECT * FROM sys.segments WHERE last_compaction_state == 'SELECT * FROM sys.segments where last_compaction_state = 'CompactionState{partitionsSpec=DynamicPartitionsSpec{maxRowsPerSegment=5000000, maxTotalRows=9223372036854775807}, indexSpec={bitmap={type=roaring, compressRunOnSerialization=true}, dimensionCompression=lz4, metricCompression=lz4, longEncoding=longs, segmentLoader=null}}'
Caveat: Note that a segment can be served by more than one stream ingestion tasks or Historical processes, in that case it would have multiple replicas. These replicas are weakly consistent with each other when served by multiple ingestion tasks, until a segment is eventually served by a Historical, at that point the segment is immutable. Broker prefers to query a segment from Historical over an ingestion task. But if a segment has multiple realtime replicas, for e.g.. Kafka index tasks, and one task is slower than other, then the sys.segments query results can vary for the duration of the tasks because only one of the ingestion tasks is queried by the Broker and it is not guaranteed that the same task gets picked every time. The num_rows
column of segments table can have inconsistent values during this period. There is an open issue about this inconsistency with stream ingestion tasks.
SERVERS table
Servers table lists all discovered servers in the cluster.
Column | Type | Notes |
---|---|---|
server | STRING | Server name in the form host:port |
host | STRING | Hostname of the server |
plaintext_port | LONG | Unsecured port of the server, or -1 if plaintext traffic is disabled |
tls_port | LONG | TLS port of the server, or -1 if TLS is disabled |
server_type | STRING | Type of Druid service. Possible values include: COORDINATOR, OVERLORD, BROKER, ROUTER, HISTORICAL, MIDDLE_MANAGER or PEON. |
tier | STRING | Distribution tier see druid.server.tier. Only valid for HISTORICAL type, for other types it's null |
current_size | LONG | Current size of segments in bytes on this server. Only valid for HISTORICAL type, for other types it's 0 |
max_size | LONG | Max size in bytes this server recommends to assign to segments see druid.server.maxSize. Only valid for HISTORICAL type, for other types it's 0 |
is_leader | LONG | 1 if the server is currently the 'leader' (for services which have the concept of leadership), otherwise 0 if the server is not the leader, or the default long value (0 or null depending on druid.generic.useDefaultValueForNull ) if the server type does not have the concept of leadership |
To retrieve information about all servers, use the query:
SELECT * FROM sys.servers;
SERVER_SEGMENTS table
SERVER_SEGMENTS is used to join servers with segments table
Column | Type | Notes |
---|---|---|
server | STRING | Server name in format host:port (Primary key of servers table) |
segment_id | STRING | Segment identifier (Primary key of segments table) |
JOIN between "servers" and "segments" can be used to query the number of segments for a specific datasource, grouped by server, example query:
SELECT count(segments.segment_id) as num_segments from sys.segments as segments
INNER JOIN sys.server_segments as server_segments
ON segments.segment_id = server_segments.segment_id
INNER JOIN sys.servers as servers
ON servers.server = server_segments.server
WHERE segments.datasource = 'wikipedia'
GROUP BY servers.server;
TASKS table
The tasks table provides information about active and recently-completed indexing tasks. For more information check out the documentation for ingestion tasks.
Column | Type | Notes |
---|---|---|
task_id | STRING | Unique task identifier |
group_id | STRING | Task group ID for this task, the value depends on the task type . For example, for native index tasks, it's same as task_id , for sub tasks, this value is the parent task's ID |
type | STRING | Task type, for example this value is "index" for indexing tasks. See tasks-overview |
datasource | STRING | Datasource name being indexed |
created_time | STRING | Timestamp in ISO8601 format corresponding to when the ingestion task was created. Note that this value is populated for completed and waiting tasks. For running and pending tasks this value is set to 1970-01-01T00:00:00Z |
queue_insertion_time | STRING | Timestamp in ISO8601 format corresponding to when this task was added to the queue on the Overlord |
status | STRING | Status of a task can be RUNNING, FAILED, SUCCESS |
runner_status | STRING | Runner status of a completed task would be NONE, for in-progress tasks this can be RUNNING, WAITING, PENDING |
duration | LONG | Time it took to finish the task in milliseconds, this value is present only for completed tasks |
location | STRING | Server name where this task is running in the format host:port, this information is present only for RUNNING tasks |
host | STRING | Hostname of the server where task is running |
plaintext_port | LONG | Unsecured port of the server, or -1 if plaintext traffic is disabled |
tls_port | LONG | TLS port of the server, or -1 if TLS is disabled |
error_msg | STRING | Detailed error message in case of FAILED tasks |
For example, to retrieve tasks information filtered by status, use the query
SELECT * FROM sys.tasks WHERE status='FAILED';
SUPERVISORS table
The supervisors table provides information about supervisors.
Column | Type | Notes |
---|---|---|
supervisor_id | STRING | Supervisor task identifier |
state | STRING | Basic state of the supervisor. Available states: UNHEALTHY_SUPERVISOR , UNHEALTHY_TASKS , PENDING , RUNNING , SUSPENDED , STOPPING . Check Kafka Docs for details. |
detailed_state | STRING | Supervisor specific state. (See documentation of the specific supervisor for details, e.g. Kafka or Kinesis) |
healthy | LONG | Boolean represented as long type where 1 = true, 0 = false. 1 indicates a healthy supervisor |
type | STRING | Type of supervisor, e.g. kafka , kinesis or materialized_view |
source | STRING | Source of the supervisor, e.g. Kafka topic or Kinesis stream |
suspended | LONG | Boolean represented as long type where 1 = true, 0 = false. 1 indicates supervisor is in suspended state |
spec | STRING | JSON-serialized supervisor spec |
For example, to retrieve supervisor tasks information filtered by health status, use the query
SELECT * FROM sys.supervisors WHERE healthy=0;
Server configuration
Druid SQL planning occurs on the Broker and is configured by Broker runtime properties.
Security
Please see Defining SQL permissions in the basic security documentation for information on permissions needed for making SQL queries.