druid/integration-tests-ex/docs/compose.md

Docker Compose Configuration

The integration tests use Docker Compose to launch Druid clusters. Each test defines its own cluster depending on what is to be tested. Since a large amount of the definition is common, we use inheritance to simplify cluster definition.

Tests are split into categories so that they can run in parallel. Some of these categories use the same cluster configuration. To further reduce redundancy, test categories can share cluster configurations.

See also:

• Druid configuration which is done via Compose.
• Test configuration which tells tests about the cluster configuration.
• Docker compose specification

File Structure

Docker Compose files live in the druid-it-cases module (test-cases folder) in the cluster directory. There is a separate subdirectory for each cluster type (subset of test categories), plus a Common folder for shared files.

Shared Directory

Each test has a "shared" directory that is mounted into each container to hold things like logs, security files, etc. The directory is known as /shared within the container, and resides in target/<category>. Even if two categories share a cluster configuration, they will have separate local versions of the shared directory. This is important to keep log files separate for each category.

Base Configurations

Test clusters run some number of third-party "infrastructure" containers, and some number of Druid service containers. For the most part, each of these services (in Compose terms) is similar from test to test. Compose provides an inheritance feature that we use to define base configurations.

• cluster/Common/dependencies.yaml defines external dependencis (MySQL, Kafka, ZK etc.)
• cluster/Common/druid.yaml defines typical settings for each Druid service.

Test-specific configurations extend and customize the above.

Druid Configuration

Docker compose passes information to Docker in the form of environment variables. The test use a variation of the environment-variable-based configuration used in the public Docker image. That is, variables of the form druid_my_config are converted, by the image launch script, into properties of the form my.config. These properties are then written to a launch-specific runtime.properties file.

Rather than have a test version of runtime.properties, instead we have a set of files that define properties as environment variables. All are located in cases/cluster/Common/environment-configs:

• common.env - Properties common to all services. This is the test equivalent to the common.runtime.properties file.
• <service>.env - Properties unique to one service. This is the test equivalent to the service/runtime.properties files.

MySQL Driver

Unit tests can use any MySQL driver, typically MySQL or MariaDB. The tests use MySQL by default. Choose a different driver by setting the MYSQL_DRIVER_CLASSNAME environment variable when running tests. The variable chooses the selected driver both in the Druid server running in a container, and in the test "clients".

Special Environment Variables

Druid properties can be a bit awkward and verbose in a test environment. A number of test-specific properties help:

• druid_standard_loadList - Common extension load list for all tests, in the form of a comma-delimited list of extensions (without the brackets.) Defined in common.env.
• druid_test_loadList - A list of additional extensions to load for a specific test. Defined in the docker-compose.yaml file for that test category. Do not include quotes.

Example test-specific list:

druid_test_loadList=druid-azure-extensions,my-extension

The launch script combines the two lists, and adds the required brackets and quotes.

Test-Specific Cluster

Each test has a directory named cluster/<category>. Docker Compose uses this name as the cluster name which appears in the Docker desktop UI. The folder contains the docker-compose.yaml file that defines the test cluster.

In the simplest case, the file just lists the services to run as extensions of the base services:

services:
  zookeeper:
    extends:
      file: ../Common/dependencies.yaml
      service: zookeeper

  broker:
    extends:
      file: ../Common/compose/druid.yaml
      service: broker
...

Cluster Configuration

If a test wants to run two of some service (say Coordinator), then it can use the "standard" definition for only one of them and must fill in the details (especially distinct port numbers) for the second. (See HighAvilability for an example.)

By default, the container and internal host name is the same as the service name. Thus, a broker service resides in a broker container known as host broker on the Docker overlay network. The service name is also usually the log file name. Thus broker logs to /target/<category>/logs/broker.log.

An environment variable DRUID_INSTANCE adds a suffix to the service name and causes the log file to be broker-one.log if the instance is one. The service name should have the full name broker-one.

Druid configuration comes from the common and service-specific environment files in /compose/environment-config. A test-specific service configuration can override any of these settings using the environment section. (See Druid Configuration for details.) For special cases, the service can define its configuration in-line and not load the standard settings at all.

Each service can override the Java options. However, in practice, the only options that actually change are those for memory. As a result, the memory settings reside in DRUID_SERVICE_JAVA_OPTS, which you can easily change on a service-by-service or test-by-test basis.

Debugging is enabled on port 8000 in the container. Each service that wishes to expose debugging must map that container port to a distinct host port.

The easiest way understand the above is to look at a few examples.

Service Names

The Docker Compose file sets up an "overlay" network to connect the containers. Each is known via a host name taken from the service name. Thus "zookeeper" is the name of the ZK service and of the container that runs ZK. Use these names in configuration within each container.

Host Ports

Outside of the application network, containers are accessible only via the host ports defined in the Docker Compose files. Thus, ZK is known as localhost:2181 to tests and other code running outside of Docker.

Test-Specific Configuration

In addition to the Druid configuration discussed above, the framework provides three ways to pass test-specific configuration to the tests. All of these methods override any configuration in the docker-compose or cluster env files.

The values here are passed into the Druid server as configuration values. The values apply to all services. (This mechanism does not allow service-specific values.) In all three approaches, use the druid_ environment variable form.

Precendence is in the order below with the user file lowest priority and environment variables highest.

User-specific ~/druid-it/<category.env file

If you are debugging a test, you may need to provide values specific to your setup. Examples include user names, passwords, credentials, cloud buckets, etc. Put these in a file in your home directory (not Druid development directory). Create a subdirectory ~/druid-it, then create a separate file for each category that you want to customize. Create entries for your information:

druid_cloud_bucket=MyBucket

Test-specific OVERRIDE_ENV file

Build scripts can pass values into Druid via a file. Set the OVERRIDE_ENV environment variable with the path to the file. Each line is formatted as above. The variable can be set on the command line:

OVERRIDE_ENV=/tmp/special.env ./cluster.sh up Category

It can also be set in Maven, or passed from the build environment, through Maven, to the script.

Environment variables

Normally the environment of the script that runs Druid is separate from the environment passed to the container. However, the launch script will copy across any variable that starts with druid_. The variable can be set on the command line:

druid_my_config=my_value ./cluster.sh up Category

It can also be set in Maven, or passed from the build environment, through Maven, to the script. This is the preferred way to pass environment-specific information from Travis into the test containers.

Define a Test Cluster

To define a test cluster, do the following:

• Define the overlay network.
• Extend the third-party services required (at least ZK and MySQL).
• Extend each Druid service needed. Add a depends_on for zookeeper and, for the Coordinator and Overlord, metadata.
• If you need multiple instances of the same service, extend that service twice, and define distinct names and port numbers.
• Add any test-specific environment configuration required.

Generating docker-compose.yaml Files

Each test has somewhat different needs for its test cluster. Yet, there is a great amount of consistency across test clusters and across services. The result, if we create files by hand, is a great amount of copy/paste redundancy, with all the problems that copy/paste implies.

As an alternative, the framework provides a simple-minded way to generate the docker-compose.yaml file using a simple Python-based template mechanism. To use this:

• Omit the test cluster directory: cluster/<category>.
• Instead, create a template file: templates/<category>.py.
• The minimal file appears below:

from template import BaseTemplate, generate

generate(__file__, BaseTemplate())

The above will generate a "generic" cluster: one of each kind of service, with either a Middle Manager or Indexer depending on the USE_INDEXER env var.

You customize your specific cluster by creating a test-specific template class which overrides the various methods that build up the cluster. By using Python, we first build the cluster as a set of Python dictionaries and arrays, then we let PyYAML convert the objects to a YAML file. Many methods exist to help you populate the configuration tree. See any of the existing files for examples.

For example, you can:

• Add test-specific environment config to one, some or all services.
• Add or remove services.
• Create multiples of selected services.

The advantage is that, as Druid evolves and we change the basics, those changes are automatically propagated to all test clusters.

Once you've created your file, the test framework will re-generate the docker-compose.yaml file on each run to reflect any per-run customization. The generated file is found in target/cluster/<category>/docker-compose.yaml. As with all generated files: resist the temptation to change the generated file: change the template instead.

The generated docker-compose.yaml file goes into a temporary folder: target/cluster/<category>. The script copies over the Common directory as well.