11 KiB

Raw Blame History

layout
doc_page

Lookups

Lookups are an experimental feature.

Lookups are a concept in Druid where dimension values are (optionally) replaced with new values. See dimension specs for more information. For the purpose of these documents, a "key" refers to a dimension value to match, and a "value" refers to its replacement. So if you wanted to rename appid-12345 to Super Mega Awesome App then the key would be appid-12345 and the value would be Super Mega Awesome App.

It is worth noting that lookups support use cases where keys map to unique values (injective) such as a country code and a country name, and also supports use cases where multiple IDs map to the same value, e.g. multiple app-ids belonging to a single account manager.

Lookups do not have history. They always use the current data. This means that if the chief account manager for a particular app-id changes, and you issue a query with a lookup to store the app-id to account manager relationship, it will return the current account manager for that app-id REGARDLESS of the time range over which you query.

If you require data time range sensitive lookups, such a use case is not currently supported dynamically at query time, and such data belongs in the raw denormalized data for use in Druid.

Very small lookups (count of keys on the order of a few dozen to a few hundred) can be passed at query time as a "map" lookup as per dimension specs.

For static lookups defined in runtime.properties rather than embedded in the query, please look at the experimental namespaced lookup extension.

For other additional lookups, please see our extensions list.

Dynamic configuration

Dynamic lookup configuration is an experimental feature.

The following documents the behavior of the cluster-wide config which is accessible through the coordinator. The configuration is propagated through the concept of "tier" of servers. A "tier" is defined as a group of services which should receive a set of lookups. For example, you might have all historicals be part of `__default`, and Peons be part of individual tiers for the datasources they are tasked with. The tiers for lookups are completely independent of historical tiers.

These configs are accessed using JSON through the following URI template

http://<COORDINATOR_IP>:<PORT>/druid/coordinator/v1/lookups/{tier}/{id}

All URIs below are assumed to have http://<COORDINATOR_IP>:<PORT> prepended.

If you have NEVER configured lookups before, you MUST post an empty json object {} to /druid/coordinator/v1/lookups to initialize the configuration.

These endpoints will return one of the following results:

404 if the resource is not found
400 if there is a problem in the formatting of the request
202 if the request was accepted asynchronously (POST and DELETE)
200 if the request succeeded (GET only)

Configuration propagation behavior

The configuration is propagated to the query serving nodes (broker / router / peon / historical) by the coordinator. The query serving nodes have an internal API for managing POST/GET/DELETE of lookups. The coordinator periodically checks the dynamic configuration for changes and, when it detects a change it does the following:

Post all lookups for a tier to all Druid nodes within that tier.
Delete lookups from a tier which were dropped between the prior configuration values and this one.

If there is no configuration change, the coordinator checks for any nodes which might be new since the last time it propagated lookups and adds all lookups for that node (assuming that node's tier has lookups). If there are errors while trying to add or update configuration on a node, that node is temporarily skipped until the next management period. The next management period the update will attempt to be propagated again. If there is an error while trying to delete a lookup from a node (or if a node is down when the coordinator is propagating the config), the delete is not attempted again. In such a case it is possible that a node has lookups that are no longer managed by the coordinator.

Bulk update

Lookups can be updated in bulk by posting a JSON object to /druid/coordinator/v1/lookups. The format of the json object is as follows:

{
    "tierName": {
        "lookupExtractorFactoryName": {
          "someExtractorField": "someExtractorValue"
        }
    }
}

So a config might look something like:

{
    "__default": {
        "country_code": {
          "type": "simple_json",
          "uri": "http://some.host.com/codes.json"
        },
        "site_id": {
            "type": "confidential_jdbc",
            "auth": "/etc/jdbc.internal",
            "table": "sites",
            "key": "site_id",
            "value": "site_name"
        },
        "site_id_customer1": {
            "type": "confidential_jdbc",
            "auth": "/etc/jdbc.customer1",
            "table": "sites",
            "key": "site_id",
            "value": "site_name"
        },
        "site_id_customer2": {
            "type": "confidential_jdbc",
            "auth": "/etc/jdbc.customer2",
            "table": "sites",
            "key": "site_id",
            "value": "site_name"
        }
    },
    "realtime_customer1": {
        "country_code": {
          "type": "simple_json",
          "uri": "http://some.host.com/codes.json"
        },
        "site_id_customer1": {
            "type": "confidential_jdbc",
            "auth": "/etc/jdbc.customer1",
            "table": "sites",
            "key": "site_id",
            "value": "site_name"
        }
    },
    "realtime_customer2": {
        "country_code": {
          "type": "simple_json",
          "uri": "http://some.host.com/codes.json"
        },
        "site_id_customer2": {
            "type": "confidential_jdbc",
            "auth": "/etc/jdbc.customer2",
            "table": "sites",
            "key": "site_id",
            "value": "site_name"
        }
    }
}

All entries in the map will UPDATE existing entries. No entries will be deleted.

Update Lookup

A POST to a particular lookup extractor factory via /druid/coordinator/v1/lookups/{tier}/{id} will update that specific extractor factory.

For example, a post to /druid/coordinator/v1/lookups/realtime_customer1/site_id_customer1 might contain the following:

{
    "type": "confidential_jdbc",
    "auth": "/etc/jdbc.customer1",
    "table": "sites_updated",
    "key": "site_id",
    "value": "site_name"
}

This will replace the site_id_customer1 lookup in the realtime_customer1 with the definition above.

Get Lookup

A GET to a particular lookup extractor factory is accomplished via /druid/coordinator/v1/lookups/{tier}/{id}

Using the prior example, a GET to /druid/coordinator/v1/lookups/realtime_customer2/site_id_customer2 should return

{
    "type": "confidential_jdbc",
    "auth": "/etc/jdbc.customer2",
    "table": "sites",
    "key": "site_id",
    "value": "site_name"
}

Delete Lookup

A DELETE to /druid/coordinator/v1/lookups/{tier}/{id} will remove that lookup from the cluster.

List tier names

A GET to /druid/coordinator/v1/lookups will return a list of known tier names in the dynamic configuration. To discover a list of tiers currently active in the cluster instead of ones known in the dynamic configuration, the parameter discover=true can be added as per /druid/coordinator/v1/lookups?discover=true.

List lookup names

A GET to /druid/coordinator/v1/lookups/{tier} will return a list of known lookup names for that tier.

Internal API

The Peon, Router, Broker, and Historical nodes all have the ability to consume lookup configuration. There is an internal API these nodes use to list/load/drop their lookups starting at /druid/listen/v1/lookups. These follow the same convention for return values as the cluster wide dynamic configuration. Usage of these endpoints is quite advanced and not recommended for most users. The endpoints are as follows:

Get Lookups

A GET to the node at /druid/listen/v1/lookups will return a json map of all the lookups currently active on the node. The return value will be a json map of the lookups to their extractor factories.


{
    "some_lookup_name": {
        "type": "simple_json",
        "uri": "http://some.host.com/codes.json"
    }
}

Get Lookup

A GET to the node at /druid/listen/v1/lookups/some_lookup_name will return the LookupExtractorFactory for the lookup identified by some_lookup_name. The return value will be the json representation of the factory.

{
    "type": "simple_json",
    "uri": "http://some.host.com/codes.json"
}

Bulk Add or Update Lookups

A POST to the node at /druid/listen/v1/lookups of a JSON map of lookup names to LookupExtractorFactory will cause the service to add or update its lookups. The return value will be a JSON map in the following format:

{
    "status": "accepted",
    "failedUpdates": {}
}

If a lookup cannot be started, or is left in an undefined state, the lookup in error will be returned in the failedUpdates field as per:

{
    "status": "accepted",
    "failedUpdates": {
        "country_code": {
            "type": "simple_json",
            "uri": "http://some.host.com/codes.json"
        }
    }
}

The failedUpdates field of the return value should be checked if a user is wanting to assure that every update succeeded.

Add or Update Lookup

A POST to the node at /druid/listen/v1/lookups/some_lookup_name will behave very similarly to a bulk update.

If some_lookup_name is desired to have the LookupExtractorFactory definition of

{
    "type": "simple_json",
    "uri": "http://some.host.com/codes.json"
}

Then a post to /druid/listen/v1/lookups/some_lookup_name will behave the same as a POST to /druid/listen/v1/lookups of


{
    "some_lookup_name": {
        "type": "simple_json",
        "uri": "http://some.host.com/codes.json"
    }
}

Remove a Lookup

A DELETE to /druid/listen/v1/lookups/some_lookup_name will remove that lookup from the node. Success will reflect the ID.

Configuration

See the coordinator configuration guilde for coordinator configuration

To configure a Broker / Router / Historical / Peon to announce itself as part of a lookup tier, use the druid.zk.paths.lookupTier property.

Property	Description	Default
`druid.lookup.tierName`	The tier for lookups for this node. This is independent of other tiers.	`__default`

11 KiB Raw Blame History

Lookups

Dynamic configuration

Configuration propagation behavior

Bulk update

Update Lookup

Get Lookup

Delete Lookup

List tier names

List lookup names

Internal API

Get Lookups

Get Lookup

Bulk Add or Update Lookups

Add or Update Lookup

Remove a Lookup

Configuration

11 KiB

Raw Blame History