diff --git a/common/src/test/bin/smart-apply-patch.sh b/common/src/test/bin/smart-apply-patch.sh
deleted file mode 100755
index 3334c2bd882..00000000000
--- a/common/src/test/bin/smart-apply-patch.sh
+++ /dev/null
@@ -1,72 +0,0 @@
-#!/usr/bin/env bash
-#   Licensed under the Apache License, Version 2.0 (the "License");
-#   you may not use this file except in compliance with the License.
-#   You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-#   Unless required by applicable law or agreed to in writing, software
-#   distributed under the License is distributed on an "AS IS" BASIS,
-#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#   See the License for the specific language governing permissions and
-#   limitations under the License.
-
-set -e
-
-PATCH_FILE=$1
-if [ -z "$PATCH_FILE" ]; then
-  echo usage: $0 patch-file
-  exit 1
-fi
-
-PATCH=${PATCH:-patch} # allow overriding patch binary
-
-# Cleanup handler for temporary files
-TOCLEAN=""
-cleanup() {
-  rm $TOCLEAN
-  exit $1
-}
-trap "cleanup 1" HUP INT QUIT TERM
-
-# Allow passing "-" for stdin patches
-if [ "$PATCH_FILE" == "-" ]; then
-  PATCH_FILE=/tmp/tmp.in.$$
-  cat /dev/fd/0 > $PATCH_FILE
-  TOCLEAN="$TOCLEAN $PATCH_FILE"
-fi
-
-# Come up with a list of changed files into $TMP
-TMP=/tmp/tmp.paths.$$
-TOCLEAN="$TOCLEAN $TMP"
-grep '^+++\|^---' $PATCH_FILE | cut -c '5-' | grep -v /dev/null | sort | uniq > $TMP
-
-# Assume p0 to start
-PLEVEL=0
-
-# if all of the lines start with a/ or b/, then this is a git patch that
-# was generated without --no-prefix
-if ! grep -qv '^a/\|^b/' $TMP ; then
-  echo Looks like this is a git patch. Stripping a/ and b/ prefixes
-  echo and incrementing PLEVEL
-  PLEVEL=$[$PLEVEL + 1]
-  sed -i -e 's,^[ab]/,,' $TMP
-fi
-
-# if all of the lines start with common/, hdfs/, or mapreduce/, this is
-# relative to the hadoop root instead of the subproject root, so we need
-# to chop off another layer
-PREFIX_DIRS=$(cut -d '/' -f 1 $TMP | sort | uniq)
-if [[ "$PREFIX_DIRS" =~ ^(hdfs|common|mapreduce)$ ]]; then
-
-  echo Looks like this is relative to project root. Increasing PLEVEL
-  PLEVEL=$[$PLEVEL + 1]
-elif ! echo "$PREFIX_DIRS" | grep -vxq 'common\|hdfs\|mapreduce' ; then
-  echo Looks like this is a cross-subproject patch. Not supported!
-  exit 1
-fi
-
-echo Going to apply patch with: $PATCH -p$PLEVEL
-$PATCH -p$PLEVEL -E < $PATCH_FILE
-
-cleanup 0
diff --git a/common/src/test/bin/test-patch.sh b/common/src/test/bin/test-patch.sh
deleted file mode 100755
index 7e87c86641f..00000000000
--- a/common/src/test/bin/test-patch.sh
+++ /dev/null
@@ -1,701 +0,0 @@
-#!/usr/bin/env bash
-#   Licensed under the Apache License, Version 2.0 (the "License");
-#   you may not use this file except in compliance with the License.
-#   You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-#   Unless required by applicable law or agreed to in writing, software
-#   distributed under the License is distributed on an "AS IS" BASIS,
-#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#   See the License for the specific language governing permissions and
-#   limitations under the License.
-
-
-#set -x
-ulimit -n 1024
-
-### Setup some variables.  
-### SVN_REVISION and BUILD_URL are set by Hudson if it is run by patch process
-### Read variables from properties file
-bindir=$(dirname $0)
-. $bindir/../test-patch.properties
-
-###############################################################################
-parseArgs() {
-  case "$1" in
-    HUDSON)
-      ### Set HUDSON to true to indicate that this script is being run by Hudson
-      HUDSON=true
-      if [[ $# != 16 ]] ; then
-        echo "ERROR: usage $0 HUDSON <PATCH_DIR> <SUPPORT_DIR> <PS_CMD> <WGET_CMD> <JIRACLI> <SVN_CMD> <GREP_CMD> <PATCH_CMD> <FINDBUGS_HOME> <FORREST_HOME> <ECLIPSE_HOME> <WORKSPACE_BASEDIR> <JIRA_PASSWD> <CURL_CMD> <DEFECT> "
-        cleanupAndExit 0
-      fi
-      PATCH_DIR=$2
-      SUPPORT_DIR=$3
-      PS=$4
-      WGET=$5
-      JIRACLI=$6
-      SVN=$7
-      GREP=$8
-      PATCH=$9
-      FINDBUGS_HOME=${10}
-      FORREST_HOME=${11}
-      ECLIPSE_HOME=${12}
-      BASEDIR=${13}
-      JIRA_PASSWD=${14}
-      CURL=${15}
-      defect=${16}
-		
-      ### Retrieve the defect number
-      if [ -z "$defect" ] ; then
-        echo "Could not determine the patch to test.  Exiting."
-        cleanupAndExit 0
-      fi
-
-      if [ ! -e "$PATCH_DIR" ] ; then
-        mkdir -p $PATCH_DIR 
-      fi
-
-      ECLIPSE_PROPERTY="-Declipse.home=$ECLIPSE_HOME"
-      ;;
-    DEVELOPER)
-      ### Set HUDSON to false to indicate that this script is being run by a developer
-      HUDSON=false
-      if [[ $# != 9 ]] ; then
-        echo "ERROR: usage $0 DEVELOPER <PATCH_FILE> <SCRATCH_DIR> <SVN_CMD> <GREP_CMD> <PATCH_CMD> <FINDBUGS_HOME> <FORREST_HOME> <WORKSPACE_BASEDIR>"
-        cleanupAndExit 0
-      fi
-      ### PATCH_FILE contains the location of the patchfile
-      PATCH_FILE=$2 
-      if [[ ! -e "$PATCH_FILE" ]] ; then
-        echo "Unable to locate the patch file $PATCH_FILE"
-        cleanupAndExit 0
-      fi
-      PATCH_DIR=$3
-      ### Check if $PATCH_DIR exists. If it does not exist, create a new directory
-      if [[ ! -e "$PATCH_DIR" ]] ; then
-	mkdir "$PATCH_DIR"
-	if [[ $? == 0 ]] ; then 
-	  echo "$PATCH_DIR has been created"
-	else
-	  echo "Unable to create $PATCH_DIR"
-	  cleanupAndExit 0
-	fi
-      fi
-      SVN=$4
-      GREP=$5
-      PATCH=$6
-      FINDBUGS_HOME=$7
-      FORREST_HOME=$8
-      BASEDIR=$9
-      ### Obtain the patch filename to append it to the version number
-      defect=`basename $PATCH_FILE` 
-      ;;
-    *)
-      echo "ERROR: usage $0 HUDSON [args] | DEVELOPER [args]"
-      cleanupAndExit 0
-      ;;
-  esac
-}
-
-###############################################################################
-checkout () {
-  echo ""
-  echo ""
-  echo "======================================================================"
-  echo "======================================================================"
-  echo "    Testing patch for ${defect}."
-  echo "======================================================================"
-  echo "======================================================================"
-  echo ""
-  echo ""
-  ### When run by a developer, if the workspace contains modifications, do not continue
-  status=`$SVN stat --ignore-externals | sed -e '/^X[ ]*/D'`
-  if [[ $HUDSON == "false" ]] ; then
-    if [[ "$status" != "" ]] ; then
-      echo "ERROR: can't run in a workspace that contains the following modifications"
-      echo "$status"
-      cleanupAndExit 1
-    fi
-  else   
-    cd $BASEDIR
-    $SVN revert -R .
-    rm -rf `$SVN status --no-ignore`
-    $SVN update
-  fi
-  return $?
-}
-
-###############################################################################
-setup () {
-  ### Download latest patch file (ignoring .htm and .html) when run from patch process
-  if [[ $HUDSON == "true" ]] ; then
-    $WGET -q -O $PATCH_DIR/jira http://issues.apache.org/jira/browse/$defect
-    if [[ `$GREP -c 'Patch Available' $PATCH_DIR/jira` == 0 ]] ; then
-      echo "$defect is not \"Patch Available\".  Exiting."
-      cleanupAndExit 0
-    fi
-    relativePatchURL=`$GREP -o '"/jira/secure/attachment/[0-9]*/[^"]*' $PATCH_DIR/jira | $GREP -v -e 'htm[l]*$' | sort | tail -1 | $GREP -o '/jira/secure/attachment/[0-9]*/[^"]*'`
-    patchURL="http://issues.apache.org${relativePatchURL}"
-    patchNum=`echo $patchURL | $GREP -o '[0-9]*/' | $GREP -o '[0-9]*'`
-    echo "$defect patch is being downloaded at `date` from"
-    echo "$patchURL"
-    $WGET -q -O $PATCH_DIR/patch $patchURL
-    VERSION=${SVN_REVISION}_${defect}_PATCH-${patchNum}
-    JIRA_COMMENT="Here are the results of testing the latest attachment 
-  $patchURL
-  against trunk revision ${SVN_REVISION}."
-
-    ### Copy in any supporting files needed by this process
-    cp -r $SUPPORT_DIR/lib/* ./lib
-    #PENDING: cp -f $SUPPORT_DIR/etc/checkstyle* ./src/test
-  ### Copy the patch file to $PATCH_DIR
-  else
-    VERSION=PATCH-${defect}
-    cp $PATCH_FILE $PATCH_DIR/patch
-    if [[ $? == 0 ]] ; then
-      echo "Patch file $PATCH_FILE copied to $PATCH_DIR"
-    else
-      echo "Could not copy $PATCH_FILE to $PATCH_DIR"
-      cleanupAndExit 0
-    fi
-  fi
-  ### exit if warnings are NOT defined in the properties file
-  if [ -z "$OK_FINDBUGS_WARNINGS" ] || [[ -z "$OK_JAVADOC_WARNINGS" ]] || [[ -z $OK_RELEASEAUDIT_WARNINGS ]]; then
-    echo "Please define the following properties in test-patch.properties file"
-	 echo  "OK_FINDBUGS_WARNINGS"
-	 echo  "OK_RELEASEAUDIT_WARNINGS"
-	 echo  "OK_JAVADOC_WARNINGS"
-    cleanupAndExit 1
-  fi
-  echo ""
-  echo ""
-  echo "======================================================================"
-  echo "======================================================================"
-  echo " Pre-build trunk to verify trunk stability and javac warnings" 
-  echo "======================================================================"
-  echo "======================================================================"
-  echo ""
-  echo ""
-  echo "$ANT_HOME/bin/ant  -Djavac.args="-Xlint -Xmaxwarns 1000" $ECLIPSE_PROPERTY -Dforrest.home=${FORREST_HOME} -D${PROJECT_NAME}PatchProcess= clean tar > $PATCH_DIR/trunkJavacWarnings.txt 2>&1"
- $ANT_HOME/bin/ant -Djavac.args="-Xlint -Xmaxwarns 1000" $ECLIPSE_PROPERTY -Dforrest.home=${FORREST_HOME} -D${PROJECT_NAME}PatchProcess= clean tar > $PATCH_DIR/trunkJavacWarnings.txt 2>&1
-  if [[ $? != 0 ]] ; then
-    echo "Trunk compilation is broken?"
-    cleanupAndExit 1
-  fi
-}
-
-###############################################################################
-### Check for @author tags in the patch
-checkAuthor () {
-  echo ""
-  echo ""
-  echo "======================================================================"
-  echo "======================================================================"
-  echo "    Checking there are no @author tags in the patch."
-  echo "======================================================================"
-  echo "======================================================================"
-  echo ""
-  echo ""
-  authorTags=`$GREP -c -i '@author' $PATCH_DIR/patch`
-  echo "There appear to be $authorTags @author tags in the patch."
-  if [[ $authorTags != 0 ]] ; then
-    JIRA_COMMENT="$JIRA_COMMENT
-
-    -1 @author.  The patch appears to contain $authorTags @author tags which the Hadoop community has agreed to not allow in code contributions."
-    return 1
-  fi
-  JIRA_COMMENT="$JIRA_COMMENT
-
-    +1 @author.  The patch does not contain any @author tags."
-  return 0
-}
-
-###############################################################################
-### Check for tests in the patch
-checkTests () {
-  echo ""
-  echo ""
-  echo "======================================================================"
-  echo "======================================================================"
-  echo "    Checking there are new or changed tests in the patch."
-  echo "======================================================================"
-  echo "======================================================================"
-  echo ""
-  echo ""
-  testReferences=`$GREP -c -i '/test' $PATCH_DIR/patch`
-  echo "There appear to be $testReferences test files referenced in the patch."
-  if [[ $testReferences == 0 ]] ; then
-    if [[ $HUDSON == "true" ]] ; then
-      patchIsDoc=`$GREP -c -i 'title="documentation' $PATCH_DIR/jira`
-      if [[ $patchIsDoc != 0 ]] ; then
-        echo "The patch appears to be a documentation patch that doesn't require tests."
-        JIRA_COMMENT="$JIRA_COMMENT
-
-    +0 tests included.  The patch appears to be a documentation patch that doesn't require tests."
-        return 0
-      fi
-    fi
-    JIRA_COMMENT="$JIRA_COMMENT
-
-    -1 tests included.  The patch doesn't appear to include any new or modified tests.
-                        Please justify why no new tests are needed for this patch.
-                        Also please list what manual steps were performed to verify this patch."
-    return 1
-  fi
-  JIRA_COMMENT="$JIRA_COMMENT
-
-    +1 tests included.  The patch appears to include $testReferences new or modified tests."
-  return 0
-}
-
-cleanUpXml () {
-  cd $BASEDIR/conf
-  for file in `ls *.xml.template`
-    do
-      rm -f `basename $file .template`
-    done
-  cd $BASEDIR  
-}
-
-###############################################################################
-### Attempt to apply the patch
-applyPatch () {
-  echo ""
-  echo ""
-  echo "======================================================================"
-  echo "======================================================================"
-  echo "    Applying patch."
-  echo "======================================================================"
-  echo "======================================================================"
-  echo ""
-  echo ""
-  export PATCH
-  $bindir/smart-apply-patch.sh $PATCH_DIR/patch
-  if [[ $? != 0 ]] ; then
-    echo "PATCH APPLICATION FAILED"
-    JIRA_COMMENT="$JIRA_COMMENT
-
-    -1 patch.  The patch command could not apply the patch."
-    return 1
-  fi
-  return 0
-}
-
-###############################################################################
-### Check there are no javadoc warnings
-checkJavadocWarnings () {
-  echo ""
-  echo ""
-  echo "======================================================================"
-  echo "======================================================================"
-  echo "    Determining number of patched javadoc warnings."
-  echo "======================================================================"
-  echo "======================================================================"
-  echo ""
-  echo ""
-  echo "$ANT_HOME/bin/ant -Dversion="${VERSION}" -DHadoopPatchProcess= clean javadoc | tee $PATCH_DIR/patchJavadocWarnings.txt"
-  $ANT_HOME/bin/ant -Dversion="${VERSION}" -DHadoopPatchProcess= clean javadoc | tee $PATCH_DIR/patchJavadocWarnings.txt
-  javadocWarnings=`$GREP -o '\[javadoc\] [0-9]* warning' $PATCH_DIR/patchJavadocWarnings.txt | awk '{total += $2} END {print total}'`
-  echo ""
-  echo ""
-  echo "There appear to be $javadocWarnings javadoc warnings generated by the patched build."
-
-  ### if current warnings greater than OK_JAVADOC_WARNINGS
-  if [[ $javadocWarnings > $OK_JAVADOC_WARNINGS ]] ; then
-    JIRA_COMMENT="$JIRA_COMMENT
-
-    -1 javadoc.  The javadoc tool appears to have generated `expr $(($javadocWarnings-$OK_JAVADOC_WARNINGS))` warning messages."
-    return 1
-  fi
-  JIRA_COMMENT="$JIRA_COMMENT
-
-    +1 javadoc.  The javadoc tool did not generate any warning messages."
-  return 0
-}
-
-###############################################################################
-### Check there are no changes in the number of Javac warnings
-checkJavacWarnings () {
-  echo ""
-  echo ""
-  echo "======================================================================"
-  echo "======================================================================"
-  echo "    Determining number of patched javac warnings."
-  echo "======================================================================"
-  echo "======================================================================"
-  echo ""
-  echo ""
-  echo "$ANT_HOME/bin/ant -Dversion="${VERSION}" -Djavac.args="-Xlint -Xmaxwarns 1000" $ECLIPSE_PROPERTY -Dforrest.home=${FORREST_HOME} -DHadoopPatchProcess= clean tar > $PATCH_DIR/patchJavacWarnings.txt 2>&1"
-  $ANT_HOME/bin/ant -Dversion="${VERSION}" -Djavac.args="-Xlint -Xmaxwarns 1000" $ECLIPSE_PROPERTY -Dforrest.home=${FORREST_HOME} -DHadoopPatchProcess= clean tar > $PATCH_DIR/patchJavacWarnings.txt 2>&1
-  if [[ $? != 0 ]] ; then
-    JIRA_COMMENT="$JIRA_COMMENT
-
-    -1 javac.  The patch appears to cause tar ant target to fail."
-    return 1
-  fi
-  ### Compare trunk and patch javac warning numbers
-  if [[ -f $PATCH_DIR/patchJavacWarnings.txt ]] ; then
-    trunkJavacWarnings=`$GREP -o '\[javac\] [0-9]* warning' $PATCH_DIR/trunkJavacWarnings.txt | awk '{total += $2} END {print total}'`
-    patchJavacWarnings=`$GREP -o '\[javac\] [0-9]* warning' $PATCH_DIR/patchJavacWarnings.txt | awk '{total += $2} END {print total}'`
-    echo "There appear to be $trunkJavacWarnings javac compiler warnings before the patch and $patchJavacWarnings javac compiler warnings after applying the patch."
-    if [[ $patchJavacWarnings != "" && $trunkJavacWarnings != "" ]] ; then
-      if [[ $patchJavacWarnings -gt $trunkJavacWarnings ]] ; then
-        JIRA_COMMENT="$JIRA_COMMENT
-
-    -1 javac.  The applied patch generated $patchJavacWarnings javac compiler warnings (more than the trunk's current $trunkJavacWarnings warnings)."
-        return 1
-      fi
-    fi
-  fi
-  JIRA_COMMENT="$JIRA_COMMENT
-
-    +1 javac.  The applied patch does not increase the total number of javac compiler warnings."
-  return 0
-}
-
-###############################################################################
-### Check there are no changes in the number of release audit (RAT) warnings
-checkReleaseAuditWarnings () {
-  echo ""
-  echo ""
-  echo "======================================================================"
-  echo "======================================================================"
-  echo "    Determining number of patched release audit warnings."
-  echo "======================================================================"
-  echo "======================================================================"
-  echo ""
-  echo ""
-  echo "$ANT_HOME/bin/ant -Dversion="${VERSION}" -Dforrest.home=${FORREST_HOME} -DHadoopPatchProcess= releaseaudit > $PATCH_DIR/patchReleaseAuditWarnings.txt 2>&1"
-  $ANT_HOME/bin/ant -Dversion="${VERSION}" -Dforrest.home=${FORREST_HOME} -DHadoopPatchProcess= releaseaudit > $PATCH_DIR/patchReleaseAuditWarnings.txt 2>&1
-
-  ### Compare trunk and patch release audit warning numbers
-  if [[ -f $PATCH_DIR/patchReleaseAuditWarnings.txt ]] ; then
-    patchReleaseAuditWarnings=`$GREP -c '\!?????' $PATCH_DIR/patchReleaseAuditWarnings.txt`
-    echo ""
-    echo ""
-    echo "There appear to be $OK_RELEASEAUDIT_WARNINGS release audit warnings before the patch and $patchReleaseAuditWarnings release audit warnings after applying the patch."
-    if [[ $patchReleaseAuditWarnings != "" && $OK_RELEASEAUDIT_WARNINGS != "" ]] ; then
-      if [[ $patchReleaseAuditWarnings -gt $OK_RELEASEAUDIT_WARNINGS ]] ; then
-        JIRA_COMMENT="$JIRA_COMMENT
-
-    -1 release audit.  The applied patch generated $patchReleaseAuditWarnings release audit warnings (more than the trunk's current $OK_RELEASEAUDIT_WARNINGS warnings)."
-        $GREP '\!?????' $PATCH_DIR/patchReleaseAuditWarnings.txt > $PATCH_DIR/patchReleaseAuditProblems.txt
-        echo "Lines that start with ????? in the release audit report indicate files that do not have an Apache license header." >> $PATCH_DIR/patchReleaseAuditProblems.txt
-        JIRA_COMMENT_FOOTER="Release audit warnings: $BUILD_URL/artifact/trunk/patchprocess/patchReleaseAuditProblems.txt
-$JIRA_COMMENT_FOOTER"
-        return 1
-      fi
-    fi
-  fi
-  JIRA_COMMENT="$JIRA_COMMENT
-
-    +1 release audit.  The applied patch does not increase the total number of release audit warnings."
-  return 0
-}
-
-###############################################################################
-### Check there are no changes in the number of Checkstyle warnings
-checkStyle () {
-  echo ""
-  echo ""
-  echo "======================================================================"
-  echo "======================================================================"
-  echo "    Determining number of patched checkstyle warnings."
-  echo "======================================================================"
-  echo "======================================================================"
-  echo ""
-  echo ""
-  echo "THIS IS NOT IMPLEMENTED YET"
-  echo ""
-  echo ""
-  echo "$ANT_HOME/bin/ant -Dversion="${VERSION}" -DHadoopPatchProcess= checkstyle"
-  $ANT_HOME/bin/ant -Dversion="${VERSION}" -DHadoopPatchProcess= checkstyle
-  JIRA_COMMENT_FOOTER="Checkstyle results: $BUILD_URL/artifact/trunk/build/test/checkstyle-errors.html
-$JIRA_COMMENT_FOOTER"
-  ### TODO: calculate actual patchStyleErrors
-#  patchStyleErrors=0
-#  if [[ $patchStyleErrors != 0 ]] ; then
-#    JIRA_COMMENT="$JIRA_COMMENT
-#
-#    -1 checkstyle.  The patch generated $patchStyleErrors code style errors."
-#    return 1
-#  fi
-#  JIRA_COMMENT="$JIRA_COMMENT
-#
-#    +1 checkstyle.  The patch generated 0 code style errors."
-  return 0
-}
-
-###############################################################################
-### Check there are no changes in the number of Findbugs warnings
-checkFindbugsWarnings () {
-  findbugs_version=`${FINDBUGS_HOME}/bin/findbugs -version`
-  echo ""
-  echo ""
-  echo "======================================================================"
-  echo "======================================================================"
-  echo "    Determining number of patched Findbugs warnings."
-  echo "======================================================================"
-  echo "======================================================================"
-  echo ""
-  echo ""
-  echo "$ANT_HOME/bin/ant -Dversion="${VERSION}" -Dfindbugs.home=$FINDBUGS_HOME -Dforrest.home=${FORREST_HOME} -DHadoopPatchProcess= findbugs"
-  $ANT_HOME/bin/ant -Dversion="${VERSION}" -Dfindbugs.home=${FINDBUGS_HOME} -Dforrest.home=${FORREST_HOME} -DHadoopPatchProcess= findbugs
-  if [ $? != 0 ] ; then
-    JIRA_COMMENT="$JIRA_COMMENT
-
-    -1 findbugs.  The patch appears to cause Findbugs (version ${findbugs_version}) to fail."
-    return 1
-  fi
-JIRA_COMMENT_FOOTER="Findbugs warnings: $BUILD_URL/artifact/trunk/build/test/findbugs/newPatchFindbugsWarnings.html
-$JIRA_COMMENT_FOOTER"
-  cp $BASEDIR/build/test/findbugs/*.xml $PATCH_DIR/patchFindbugsWarnings.xml
-  $FINDBUGS_HOME/bin/setBugDatabaseInfo -timestamp "01/01/2000" \
-    $PATCH_DIR/patchFindbugsWarnings.xml \
-    $PATCH_DIR/patchFindbugsWarnings.xml
-  findbugsWarnings=`$FINDBUGS_HOME/bin/filterBugs -first "01/01/2000" $PATCH_DIR/patchFindbugsWarnings.xml \
-    $BASEDIR/build/test/findbugs/newPatchFindbugsWarnings.xml | /usr/bin/awk '{print $1}'`
-  $FINDBUGS_HOME/bin/convertXmlToText -html \
-    $BASEDIR/build/test/findbugs/newPatchFindbugsWarnings.xml \
-    $BASEDIR/build/test/findbugs/newPatchFindbugsWarnings.html
-  cp $BASEDIR/build/test/findbugs/newPatchFindbugsWarnings.html $PATCH_DIR/newPatchFindbugsWarnings.html
-  cp $BASEDIR/build/test/findbugs/newPatchFindbugsWarnings.xml $PATCH_DIR/newPatchFindbugsWarnings.xml
-
-  ### if current warnings greater than OK_FINDBUGS_WARNINGS
-  if [[ $findbugsWarnings > $OK_FINDBUGS_WARNINGS ]] ; then
-    JIRA_COMMENT="$JIRA_COMMENT
-
-    -1 findbugs.  The patch appears to introduce `expr $(($findbugsWarnings-$OK_FINDBUGS_WARNINGS))` new Findbugs (version ${findbugs_version}) warnings."
-    return 1
-  fi
-  JIRA_COMMENT="$JIRA_COMMENT
-
-    +1 findbugs.  The patch does not introduce any new Findbugs (version ${findbugs_version}) warnings."
-  return 0
-}
-
-###############################################################################
-### Run the test-core target
-runCoreTests () {
-  echo ""
-  echo ""
-  echo "======================================================================"
-  echo "======================================================================"
-  echo "    Running core tests."
-  echo "======================================================================"
-  echo "======================================================================"
-  echo ""
-  echo ""
-  
-  ### Kill any rogue build processes from the last attempt
-  $PS auxwww | $GREP HadoopPatchProcess | /usr/bin/nawk '{print $2}' | /usr/bin/xargs -t -I {} /bin/kill -9 {} > /dev/null
-  PreTestTarget=""
-  if [[ $defect == MAPREDUCE-* ]] ; then
-     PreTestTarget="create-c++-configure"
-  fi
-
-  echo "$ANT_HOME/bin/ant -Dversion="${VERSION}" -DHadoopPatchProcess= -Dtest.junit.output.format=xml -Dtest.output=no -Dcompile.c++=yes -Dforrest.home=$FORREST_HOME $PreTestTarget test-core"
-  $ANT_HOME/bin/ant -Dversion="${VERSION}" -DHadoopPatchProcess= -Dtest.junit.output.format=xml -Dtest.output=no -Dcompile.c++=yes -Dforrest.home=$FORREST_HOME  $PreTestTarget test-core
-  if [[ $? != 0 ]] ; then
-    ### Find and format names of failed tests
-    failed_tests=`grep -l -E "<failure|<error" $WORKSPACE/trunk/build/test/*.xml | sed -e "s|.*build/test/TEST-|                  |g" | sed -e "s|\.xml||g"`
-    JIRA_COMMENT="$JIRA_COMMENT
-
-    -1 core tests.  The patch failed these core unit tests:
-$failed_tests"
-    return 1
-  fi
-  JIRA_COMMENT="$JIRA_COMMENT
-
-    +1 core tests.  The patch passed core unit tests."
-  return 0
-}
-
-###############################################################################
-### Run the test-contrib target
-runContribTests () {
-  echo ""
-  echo ""
-  echo "======================================================================"
-  echo "======================================================================"
-  echo "    Running contrib tests."
-  echo "======================================================================"
-  echo "======================================================================"
-  echo ""
-  echo ""
-
-  if [[ `$GREP -c 'test-contrib' build.xml` == 0 ]] ; then
-    echo "No contrib tests in this project."
-    return 0
-  fi
-
-  ### Kill any rogue build processes from the last attempt
-  $PS auxwww | $GREP HadoopPatchProcess | /usr/bin/nawk '{print $2}' | /usr/bin/xargs -t -I {} /bin/kill -9 {} > /dev/null
-
-  echo "$ANT_HOME/bin/ant -Dversion="${VERSION}" $ECLIPSE_PROPERTY -DHadoopPatchProcess= -Dtest.junit.output.format=xml -Dtest.output=no test-contrib"
-  $ANT_HOME/bin/ant -Dversion="${VERSION}" $ECLIPSE_PROPERTY -DHadoopPatchProcess= -Dtest.junit.output.format=xml -Dtest.output=no test-contrib
-  if [[ $? != 0 ]] ; then
-    JIRA_COMMENT="$JIRA_COMMENT
-
-    -1 contrib tests.  The patch failed contrib unit tests."
-    return 1
-  fi
-  JIRA_COMMENT="$JIRA_COMMENT
-
-    +1 contrib tests.  The patch passed contrib unit tests."
-  return 0
-}
-
-###############################################################################
-### Run the inject-system-faults target
-checkInjectSystemFaults () {
-  echo ""
-  echo ""
-  echo "======================================================================"
-  echo "======================================================================"
-  echo "    Checking the integrity of system test framework code."
-  echo "======================================================================"
-  echo "======================================================================"
-  echo ""
-  echo ""
-  
-  ### Kill any rogue build processes from the last attempt
-  $PS auxwww | $GREP HadoopPatchProcess | /usr/bin/nawk '{print $2}' | /usr/bin/xargs -t -I {} /bin/kill -9 {} > /dev/null
-
-  echo "$ANT_HOME/bin/ant -Dversion="${VERSION}" -DHadoopPatchProcess= -Dtest.junit.output.format=xml -Dtest.output=no -Dcompile.c++=yes -Dforrest.home=$FORREST_HOME inject-system-faults"
-  $ANT_HOME/bin/ant -Dversion="${VERSION}" -DHadoopPatchProcess= -Dtest.junit.output.format=xml -Dtest.output=no -Dcompile.c++=yes -Dforrest.home=$FORREST_HOME inject-system-faults
-  if [[ $? != 0 ]] ; then
-    JIRA_COMMENT="$JIRA_COMMENT
-
-    -1 system test framework.  The patch failed system test framework compile."
-    return 1
-  fi
-  JIRA_COMMENT="$JIRA_COMMENT
-
-    +1 system test framework.  The patch passed system test framework compile."
-  return 0
-}
-
-###############################################################################
-### Submit a comment to the defect's Jira
-submitJiraComment () {
-  local result=$1
-  ### Do not output the value of JIRA_COMMENT_FOOTER when run by a developer
-  if [[  $HUDSON == "false" ]] ; then
-    JIRA_COMMENT_FOOTER=""
-  fi
-  if [[ $result == 0 ]] ; then
-    comment="+1 overall.  $JIRA_COMMENT
-
-$JIRA_COMMENT_FOOTER"
-  else
-    comment="-1 overall.  $JIRA_COMMENT
-
-$JIRA_COMMENT_FOOTER"
-  fi
-  ### Output the test result to the console
-  echo "
-
-
-
-$comment"  
-
-  if [[ $HUDSON == "true" ]] ; then
-    echo ""
-    echo ""
-    echo "======================================================================"
-    echo "======================================================================"
-    echo "    Adding comment to Jira."
-    echo "======================================================================"
-    echo "======================================================================"
-    echo ""
-    echo ""
-    ### Update Jira with a comment
-    export USER=hudson
-    $JIRACLI -s https://issues.apache.org/jira -a addcomment -u hadoopqa -p $JIRA_PASSWD --comment "$comment" --issue $defect
-    $JIRACLI -s https://issues.apache.org/jira -a logout -u hadoopqa -p $JIRA_PASSWD
-  fi
-}
-
-###############################################################################
-### Cleanup files
-cleanupAndExit () {
-  local result=$1
-  if [[ $HUDSON == "true" ]] ; then
-    if [ -e "$PATCH_DIR" ] ; then
-      mv $PATCH_DIR $BASEDIR
-    fi
-  fi
-  echo ""
-  echo ""
-  echo "======================================================================"
-  echo "======================================================================"
-  echo "    Finished build."
-  echo "======================================================================"
-  echo "======================================================================"
-  echo ""
-  echo ""
-  exit $result
-}
-
-###############################################################################
-###############################################################################
-###############################################################################
-
-JIRA_COMMENT=""
-JIRA_COMMENT_FOOTER="Console output: $BUILD_URL/console
-
-This message is automatically generated."
-
-### Check if arguments to the script have been specified properly or not
-parseArgs $@
-cd $BASEDIR
-
-checkout
-RESULT=$?
-if [[ $HUDSON == "true" ]] ; then
-  if [[ $RESULT != 0 ]] ; then
-    exit 100
-  fi
-fi
-setup
-checkAuthor
-RESULT=$?
-
-if [[ $HUDSON == "true" ]] ; then
-  cleanUpXml
-fi
-checkTests
-(( RESULT = RESULT + $? ))
-applyPatch
-if [[ $? != 0 ]] ; then
-  submitJiraComment 1
-  cleanupAndExit 1
-fi
-checkJavadocWarnings
-(( RESULT = RESULT + $? ))
-checkJavacWarnings
-(( RESULT = RESULT + $? ))
-### Checkstyle not implemented yet
-#checkStyle
-#(( RESULT = RESULT + $? ))
-checkFindbugsWarnings
-(( RESULT = RESULT + $? ))
-checkReleaseAuditWarnings
-(( RESULT = RESULT + $? ))
-### Do not call these when run by a developer 
-if [[ $HUDSON == "true" ]] ; then
-  runCoreTests
-  (( RESULT = RESULT + $? ))
-  runContribTests
-  (( RESULT = RESULT + $? ))
-fi
-checkInjectSystemFaults
-(( RESULT = RESULT + $? ))
-JIRA_COMMENT_FOOTER="Test results: $BUILD_URL/testReport/
-$JIRA_COMMENT_FOOTER"
-
-submitJiraComment $RESULT
-cleanupAndExit $RESULT