* CredentialProviderFactory to detect and report on recursion.
* S3AFS to remove incompatible providers.
* Integration Test for this.
Contributed by Steve Loughran.
Change-Id: Ia247b3c9fe8488ffdb7f57b40eb6e37c57e522ef
Fixes the regression caused by HADOOP-17511 by moving where the
option fs.s3a.acl.default is read -doing it before the RequestFactory
is created.
Adds
* A unit test in TestRequestFactory to verify the ACLs are set
on all file write operations.
* A new ITestS3ACannedACLs test which verifies that ACLs really
do get all the way through.
* S3A Assumed Role delegation tokens to include the IAM permission
s3:PutObjectAcl in the generated role.
Contributed by Steve Loughran
Change-Id: I3abac6a1b9e150b6b6df0af7c2c70093f8f518cb
This patch cuts down the size of directory trees used for
distcp contract tests against object stores, so making
them much faster against distant/slow stores.
On abfs, the test only runs with -Dscale (as was the case for s3a already),
and has the larger scale test timeout.
After every test case, the FileSystem IOStatistics are logged,
to provide information about what IO is taking place and
what it's performance is.
There are some test cases which upload files of 1+ MiB; you can
increase the size of the upload in the option
"scale.test.distcp.file.size.kb"
Set it to zero and the large file tests are skipped.
Contributed by Steve Loughran.
This improves error handling after multiple failures reading data
-when the read fails and attempts to reconnect() also fail.
Contributed by Bobby Wang.
Change-Id: If17dee395ad6b9b7c738021bad20d0a13eb4011e
This work
* Defines the behavior of FileSystem.copyFromLocal in filesystem.md
* Implements a high performance implementation of copyFromLocalOperation
for S3
* Adds a contract test for the operation: AbstractContractCopyFromLocalTest
* Implements the contract tests for Local and S3A FileSystems
Contributed by: Bogdan Stolojan
Change-Id: I25d502102775c3626c4264e5a14c649879730050
Some network exceptions can raise SdkClientException with message
`Data read has a different length than the expected`.
These should be recoverable.
Contributed by Bogdan Stolojan
Change-Id: Ia22fd77d90971e9e02b4f947398a4749eebe5909
This addresses the regression in Hadoop 3.3.1 where if no S3 endpoint
is set in fs.s3a.endpoint, S3A filesystem creation may fail on
non-EC2 deployments, depending on the local host environment setup.
* If fs.s3a.endpoint is empty/null, and fs.s3a.endpoint.region
is null, the region is set to "us-east-1".
* If fs.s3a.endpoint.region is explicitly set to "" then the client
falls back to the SDK region resolution chain; this works on EC2
* Details in troubleshooting.md, including a workaround for Hadoop-3.3.1+
* Also contains some minor restructuring of troubleshooting.md
Contributed by Steve Loughran.
Change-Id: Ife482cff513307cd52d59eec56beac0a33e031f5
The S3A connector supports
"an auditor", a plugin which is invoked
at the start of every filesystem API call,
and whose issued "audit span" provides a context
for all REST operations against the S3 object store.
The standard auditor sets the HTTP Referrer header
on the requests with information about the API call,
such as process ID, operation name, path,
and even job ID.
If the S3 bucket is configured to log requests, this
information will be preserved there and so can be used
to analyze and troubleshoot storage IO.
Contributed by Steve Loughran.
Change-Id: Ic0a105c194342ed2d529833ecc42608e8ba2f258
The option `fs.s3a.endpoint.region` can be used
to explicitly set the AWS region of a bucket.
This is needed when using AWS Private Link, as
the region cannot be automatically determined.
Contributed by Mehakmeet Singh
Change-Id: I4b52f85d7af0ddd56b2b0505ac0124d4fcc67ca0
When the S3A and ABFS filesystems are closed,
their IOStatistics are logged at debug in the log:
org.apache.hadoop.fs.statistics.IOStatisticsLogging
Set `fs.iostatistics.logging.level` to `info` for the statistics
to be logged at info. (also: `warn` or `error` for even higher
log levels).
Contributed by: Mehakmeet Singh
Change-Id: I56d44ad89fc1c0dd4baf701681834e7fd96c544f
Followup to HADOOP-13327, which changed S3A output stream hsync/hflush calls
to raise an exception.
Adds a new option fs.s3a.downgrade.syncable.exceptions
When true, calls to Syncable hsync/hflush on S3A output streams will
log once at warn (for entire process life, not just the stream), then
increment IOStats with the relevant operation counter
With the downgrade option false (default)
* IOStats are incremented
* The UnsupportedOperationException current raised includes a link to the
JIRA.
Contributed by Steve Loughran.
Change-Id: I967e077eda1d1a1a3795b4d22e003fe7997b6679
Also fixes HADOOP-16995. ITestS3AConfiguration proxy tests failures when bucket probes == 0
The improvement should include the fix, because the test would fail by default otherwise.
Change-Id: I9a7e4b5e6d4391ebba096c15e84461c038a2ec59
A regression caused by HADOOP-17022: the reduction in LIST calls broken an assertion.
Contributed by Mukund Thakur
Change-Id: Ib9725165906931634567fd1f62a81e3a6ea5620c
Moves to the builder API for AWS S3 client creation, and
offers a similar style of API to the S3A FileSystem and tests, hiding
the details of which options are client, which are in AWS Conf,
and doing the wiring up of S3A statistics interfaces to the AWS
SDK internals. S3A Statistics, including IOStatistics, should now
count throttling events handled in the AWS SDK itself.
This patch restores endpoint determination by probes to US-East-1
if the client isn't configured with fs.s3a.endpoint.
Explicitly setting the endpoint will save the cost of these probe
HTTP requests.
Contributed by Steve Loughran.
Change-Id: Ifa6caa8ff56369ad30e4fd01a42bc74f7b8b3d6b
The S3A connector's rename() operation now raises FileNotFoundException if
the source doesn't exist; a FileAlreadyExistsException if the destination
exists and is unsuitable for the source file/directory.
When renaming to a path which does not exist, the connector no longer checks
for the destination parent directory existing -instead it simply verifies
that there is no file immediately above the destination path.
This is needed to avoid race conditions with delete() and rename()
calls working on adjacent subdirectories.
Contributed by Steve Loughran.
Removed findbugs from the hadoop build images and added spotbugs instead.
Upgraded SpotBugs to 4.2.2 and spotbugs-maven-plugin to 4.2.0.
Reviewed-by: Masatake Iwasaki <iwasakims@apache.org>
(cherry picked from commit 23b343aed1)
Conflicts:
dev-support/docker/Dockerfile
hadoop-project/pom.xml
Adds an Abortable.abort() interface for streams to enable output streams to be terminated; this
is implemented by the S3A connector's output stream. It allows for commit protocols
to be implemented which commit/abort work by writing to the final destination and
using the abort() call to cancel any write which is not intended to be committed.
Consult the specification document for information about the interface and its use.
Contributed by Jungtaek Lim and Steve Loughran.
Change-Id: I7fcc25e9dd8c10ce6c29f383529f3a2642a201ae
This defines what output streams and especially those which implement
Syncable are meant to do, and documents where implementations (HDFS; S3)
don't. With tests.
The file:// FileSystem now supports Syncable if an application calls
FileSystem.setWriteChecksum(false) before creating a file -checksumming
and Syncable.hsync() are incompatible.
Contributed by Steve Loughran.
Change-Id: I892d768de6268f4dd6f175b3fe3b7e5bcaa91194
* core-default.xml updated so that fs.s3a.committer.magic.enabled = true
* CommitConstants updated to match
* All tests which previously enabled the magic committer now rely on
default settings. This helps make sure it is enabled.
* Docs cover the switch, mention its enabled and explain why you may
want to disable it.
Note: this doesn't switch to using the committer -it just enables the path
rewriting magic which it depends on.
Contributed by Steve Loughran.
This needs SPARK-33739 in the matching spark branch in order to work
Contributed by Steve Loughran.
Change-Id: I4fe75b057159e35aacc072da3cb7343467c0c3f1
Caused by HADOOP-16830 and HADOOP-17271.
Fixes tests which fail intermittently based on configs and
in the case of the HugeFile tests, bulk runs with existing
FS instances meant statistic probes sometimes ended up probing those
of a previous FS.
Contributed by Steve Loughran.
Change-Id: I65ba3f44444e59d298df25ac5c8dc5a8781dfb7d
S3A connector to support the IOStatistics API of HADOOP-16830,
This is a major rework of the S3A Statistics collection to
* Embrace the IOStatistics APIs
* Move from direct references of S3AInstrumention statistics
collectors to interface/implementation classes in new packages.
* Ubiquitous support of IOStatistics, including:
S3AFileSystem, input and output streams, RemoteIterator instances
provided in list calls.
* Adoption of new statistic names from hadoop-common
Regarding statistic collection, as well as all existing
statistics, the connector now records min/max/mean durations
of HTTP GET and HEAD requests, and those of LIST operations.
Contributed by Steve Loughran.
Change-Id: I182d34b6ac39e017a8b4a221dad8e930882b39cf
Contributed by Steve Loughran
The addition of deprecated S3A configuration options in HADOOP-17318
triggered a reload of default (xml resource) configurations, which breaks
tests which fail if there's a per-bucket setting inconsistent with test
setup.
Creating an S3AFS instance before creating the Configuration() instance
for test runs gets that reload out the way before test setup takes
place.
Along with the fix, extra changes in the failing test suite to fail
fast when marker policy isn't as expected, and to log FS state better.
Rather than create and discard an instance, add a new static method
to S3AFS and invoke it in test setup. This forces the load
Change-Id: Id52b1c46912c6fedd2ae270e2b1eb2222a360329
See also [SPARK-33402]: Jobs launched in same second have duplicate MapReduce JobIDs
Contributed by Steve Loughran.
Change-Id: Iae65333cddc84692997aae5d902ad8765b45772a
This adds a semaphore to throttle the number of FileSystem instances which
can be created simultaneously, set in "fs.creation.parallel.count".
This is designed to reduce the impact of many threads in an application calling
FileSystem.get() on a filesystem which takes time to instantiate -for example
to an object where HTTPS connections are set up during initialization.
Many threads trying to do this may create spurious delays by conflicting
for access to synchronized blocks, when simply limiting the parallelism
diminishes the conflict, so speeds up all threads trying to access
the store.
The default value, 64, is larger than is likely to deliver any speedup -but
it does mean that there should be no adverse effects from the change.
If a service appears to be blocking on all threads initializing connections to
abfs, s3a or store, try a smaller (possibly significantly smaller) value.
Contributed by Steve Loughran.
Change-Id: I57161b026f28349e339dc8b9d74f6567a62ce196
This patch
* fixes the inversion
* adds a precondition check
* if the commands are supplied inverted, swaps them with a warning.
This is to stop breaking any tests written to cope with the existing
behavior.
Contributed by Steve Loughran
Change-Id: I15c40863f0db0675c7d60db477cb3bf1693cae49
Steve Loughran
Dongjoon Hyun
Bobby Wang
Petre Bogdan Stolojan
Mehakmeet Singh
Zamil Majdy
Wei-Chiu Chuang
Gabor Bota
Mukund Thakur
Ayush Saxena
Akira Ajisaka
Pierrick Hymbert
Maksim Bober
yzhangal
Chao Sun