Add support for S3 Access Points. This provides extra security as it
ensures applications are not working with buckets belong to third parties.
To bind a bucket to an access point, set the access point (ap) ARN,
which must be done for each specific bucket, using the pattern
fs.s3a.bucket.$BUCKET.accesspoint.arn = ARN
* The global/bucket option `fs.s3a.accesspoint.required` to
mandate that buckets must declare their access point.
* This is not compatible with S3Guard.
Consult the documentation for further details.
Contributed by Bogdan Stolojan
Addresses the problem of processes running out of memory when
there are many ABFS output streams queuing data to upload,
especially when the network upload bandwidth is less than the rate
data is generated.
ABFS Output streams now buffer their blocks of data to
"disk", "bytebuffer" or "array", as set in
"fs.azure.data.blocks.buffer"
When buffering via disk, the location for temporary storage
is set in "fs.azure.buffer.dir"
For safe scaling: use "disk" (default); for performance, when
confident that upload bandwidth will never be a bottleneck,
experiment with the memory options.
The number of blocks a single stream can have queued for uploading
is set in "fs.azure.block.upload.active.blocks".
The default value is 20.
Contributed by Mehakmeet Singh.
* HDFS-16129. Fixing the signature secret file misusage in HttpFS.
The signature secret file was not used in HttpFs.
- if the configuration did not contain the deprecated
httpfs.authentication.signature.secret.file option then it
used the random secret provider
- if both option (httpfs. and hadoop.http.) was set then
the HttpFSAuthenticationFilter could not read the file
because the file path was not substituted properly
!NOTE! behavioral change: the deprecated httpfs. configuration
values are overwritten with the hadoop.http. values.
The commit also contains a follow up change to the YARN-10814,
empty secret files will result in a random secret provider.
Co-authored-by: Tamas Domok <tdomok@cloudera.com>
This adds a new class org.apache.hadoop.util.Preconditions which is
* @Private/@Unstable
* Intended to allow us to move off Google Guava
* Is designed to be trivially backportable
(i.e contains no references to guava classes internally)
Please use this instead of the guava equivalents, where possible.
Contributed by: Ahmed Hussein
Change-Id: Ic392451bcfe7d446184b7c995734bcca8c07286e
This migrates the fs.s3a-server-side encryption configuration options
to a name which covers client-side encryption too.
fs.s3a.server-side-encryption-algorithm becomes fs.s3a.encryption.algorithm
fs.s3a.server-side-encryption.key becomes fs.s3a.encryption.key
The existing keys remain valid, simply deprecated and remapped
to the new values. If you want server-side encryption options
to be picked up regardless of hadoop versions, use
the old keys.
(the old key also works for CSE, though as no version of Hadoop
with CSE support has shipped without this remapping, it's less
relevant)
Contributed by: Mehakmeet Singh
This migrates the fs.s3a-server-side encryption configuration options
to a name which covers client-side encryption too.
fs.s3a.server-side-encryption-algorithm becomes fs.s3a.encryption.algorithm
fs.s3a.server-side-encryption.key becomes fs.s3a.encryption.key
The existing keys remain valid, simply deprecated and remapped
to the new values. If you want server-side encryption options
to be picked up regardless of hadoop versions, use
the old keys.
(the old key also works for CSE, though as no version of Hadoop
with CSE support has shipped without this remapping, it's less
relevant)
Contributed by: Mehakmeet Singh
* Router to support resolving monitored namenodes with DNS
* Style
* fix style and test failure
* Add test for NNHAServiceTarget const
* Resolve comments
* Fix test
* Comments and style
* Create a simple function to extract port
* Use LambdaTestUtils.intercept
* fix javadoc
* Trigger Build
* CredentialProviderFactory to detect and report on recursion.
* S3AFS to remove incompatible providers.
* Integration Test for this.
Contributed by Steve Loughran.
Currently, GzipCodec only supports BuiltInGzipDecompressor, if native zlib is not loaded. So, without Hadoop native codec installed, saving SequenceFile using GzipCodec will throw exception like "SequenceFile doesn't work with GzipCodec without native-hadoop code!"
Same as other codecs which we migrated to using prepared packages (lz4, snappy), it will be better if we support GzipCodec generally without Hadoop native codec installed. Similar to BuiltInGzipDecompressor, we can use Java Deflater to support BuiltInGzipCompressor.
Fixes the regression caused by HADOOP-17511 by moving where the
option fs.s3a.acl.default is read -doing it before the RequestFactory
is created.
Adds
* A unit test in TestRequestFactory to verify the ACLs are set
on all file write operations.
* A new ITestS3ACannedACLs test which verifies that ACLs really
do get all the way through.
* S3A Assumed Role delegation tokens to include the IAM permission
s3:PutObjectAcl in the generated role.
Contributed by Steve Loughran
This patch cuts down the size of directory trees used for
distcp contract tests against object stores, so making
them much faster against distant/slow stores.
On abfs, the test only runs with -Dscale (as was the case for s3a already),
and has the larger scale test timeout.
After every test case, the FileSystem IOStatistics are logged,
to provide information about what IO is taking place and
what it's performance is.
There are some test cases which upload files of 1+ MiB; you can
increase the size of the upload in the option
"scale.test.distcp.file.size.kb"
Set it to zero and the large file tests are skipped.
Contributed by Steve Loughran.
This work
* Defines the behavior of FileSystem.copyFromLocal in filesystem.md
* Implements a high performance implementation of copyFromLocalOperation
for S3
* Adds a contract test for the operation: AbstractContractCopyFromLocalTest
* Implements the contract tests for Local and S3A FileSystems
Contributed by: Bogdan Stolojan
This (big!) patch adds support for client side encryption in AWS S3,
with keys managed by AWS-KMS.
Read the documentation in encryption.md very, very carefully before
use and consider it unstable.
S3-CSE is enabled in the existing configuration option
"fs.s3a.server-side-encryption-algorithm":
fs.s3a.server-side-encryption-algorithm=CSE-KMS
fs.s3a.server-side-encryption.key=<KMS_KEY_ID>
You cannot enable CSE and SSE in the same client, although
you can still enable a default SSE option in the S3 console.
* Filesystem list/get status operations subtract 16 bytes from the length
of all files >= 16 bytes long to compensate for the padding which CSE
adds.
* The SDK always warns about the specific algorithm chosen being
deprecated. It is critical to use this algorithm for ranged
GET requests to work (i.e. random IO). Ignore.
* Unencrypted files CANNOT BE READ.
The entire bucket SHOULD be encrypted with S3-CSE.
* Uploading files may be a bit slower as blocks are now
written sequentially.
* The Multipart Upload API is disabled when S3-CSE is active.
Contributed by Mehakmeet Singh
* Rebase trunk
* Fix to use FQDN and update config name
* Fix javac
* Style and trigger build
* Trigger Build after force push
* Trigger Build
* Fix config names
The S3A connector supports
"an auditor", a plugin which is invoked
at the start of every filesystem API call,
and whose issued "audit span" provides a context
for all REST operations against the S3 object store.
The standard auditor sets the HTTP Referrer header
on the requests with information about the API call,
such as process ID, operation name, path,
and even job ID.
If the S3 bucket is configured to log requests, this
information will be preserved there and so can be used
to analyze and troubleshoot storage IO.
Contributed by Steve Loughran.
When the S3A and ABFS filesystems are closed,
their IOStatistics are logged at debug in the log:
org.apache.hadoop.fs.statistics.IOStatisticsLogging
Set `fs.iostatistics.logging.level` to `info` for the statistics
to be logged at info. (also: `warn` or `error` for even higher
log levels).
Contributed by: Mehakmeet Singh
1. puts NVDIMM to the end of storage type enum to make sure compatibility.
2. adds check to make sure the software layout version is satisfied
Co-authored-by: su xu <kevinbrandon@163.com>
Co-authored-by: huangtianhua <huangtianhua223@gmail.com>
Co-authored-by: YaYun-Wang <34060507+YaYun-Wang@users.noreply.github.com>
Signed-off-by: Mingliang Liu <liuml07@apache.org>
Signed-off-by: Ayush Saxena <ayushsaxena@apache.org>
Signed-off-by: Vinayakumar B <vinayakumarb@apache.org>
Change-Id: I3c58beef50730827a09b3c968e9ad637baa57d44
This reverts commit 394b9f7a5c.
Ref: HDFS-15995.
Had to revert this commit, so we can commit HDFS-15566 (a critical bug preventing rolling upgrade to Hadoop 3.3)
Will re-work this fix again later.
Followup to HADOOP-13327, which changed S3A output stream hsync/hflush calls
to raise an exception.
Adds a new option fs.s3a.downgrade.syncable.exceptions
When true, calls to Syncable hsync/hflush on S3A output streams will
log once at warn (for entire process life, not just the stream), then
increment IOStats with the relevant operation counter
With the downgrade option false (default)
* IOStats are incremented
* The UnsupportedOperationException current raised includes a link to the
JIRA.
Contributed by Steve Loughran.
The ABFS Filesystem and its input and output streams now implement
the IOStatisticSource interface and provide IOStatistics on
their interactions with Azure Storage.
This includes the min/max/mean durations of all REST API calls.
Contributed by Mehakmeet Singh <mehakmeet.singh@cloudera.com>
Reapply of issue reverted first because it caused yarn failures and
then again because the commit message was incorrectly formatted
(and yet again because of commit message format).
Signed-off-by: stack <stack@apache.org>
The S3A connector's rename() operation now raises FileNotFoundException if
the source doesn't exist; a FileAlreadyExistsException if the destination
exists and is unsuitable for the source file/directory.
When renaming to a path which does not exist, the connector no longer checks
for the destination parent directory existing -instead it simply verifies
that there is no file immediately above the destination path.
This is needed to avoid race conditions with delete() and rename()
calls working on adjacent subdirectories.
Contributed by Steve Loughran.
Viraj Jasani
Ahmed Hussein
huhaiyang
Ayush Saxena
Neil
litao
pbacsko
Petre Bogdan Stolojan
Chao Sun
Gautham B A
Inigo Goiri
Renukaprasad C
Liang-Chi Hsieh
Mehakmeet Singh
Szilard Nemeth
Tamas Domok
Rintaro Ikeda
Steve Loughran
Steve Loughran
Weihao Zheng
LeonGao
9uapaw
Adam Binford
Szilard Nemeth
Masatake Iwasaki
Chris Nauroth
Yellow Flash
Uma Maheswara Rao G
Dongjoon Hyun
Akira Ajisaka
jianghuazhu
Bryan Beaudreault
Bryan Beaudreault
hchaverr
He Xiaoqiao
Abhishek Das
Artem Smotrakov
liangxs
Rafal Wojdyla
Takanobu Asanuma
Wei-Chiu Chuang
Mingliang Liu
July
Konstantin V Shvachko
Hui Fei
Vinayakumar B
Hongbing Wang
Xiaoyu Yao
dependabot[bot]
Borislav Iordanov
hexiaoqiao
Istvan Fajth
kishendas
lfengnan
Boyina, Hemanth Kumar
zhuqi
Brahma Reddy Battula
stack
touchida
Jack Jiang
kwangsun
Jim Brennan
Chao Sun
Haoze Wu
S O'Donnell