Contributed by Thomas Marquardt.
DETAILS:
1) The authentication version in the service has been updated from Dec19 to Feb20, so need to update the client.
2) Add support and test cases for getXattr and setXAttr.
3) Update DelegationSASGenerator and related to use Duration instead of int for time periods.
4) Cleanup DelegationSASGenerator switch/case statement that maps operations to permissions.
5) Cleanup SASGenerator classes to use String.equals instead of ==.
TESTS:
Added tests for getXAttr and setXAttr.
All tests are passing against my account in eastus2euap:
$mvn -T 1C -Dparallel-tests=abfs -Dscale -DtestsThreadCount=8 clean verify
Tests run: 76, Failures: 0, Errors: 0, Skipped: 0
Tests run: 441, Failures: 0, Errors: 0, Skipped: 33
Tests run: 206, Failures: 0, Errors: 0, Skipped: 24
Contributed by Steve Loughran.
S3A delegation token providers will be asked for any additional
token issuers, an array can be returned,
each one will be asked for tokens when DelegationTokenIssuer collects
all the tokens for a filesystem.
Contributed by Mukund Thakur and Steve Loughran.
This patch ensures that writes to S3A fail when more than 10,000 blocks are
written. That upper bound still exists. To write massive files, make sure
that the value of fs.s3a.multipart.size is set to a size which is large
enough to upload the files in fewer than 10,000 blocks.
Change-Id: Icec604e2a357ffd38d7ae7bc3f887ff55f2d721a
Contributed by Thomas Marquardt.
DETAILS:
Previously we had a SASGenerator class which generated Service SAS, but we need to add DelegationSASGenerator.
I separated SASGenerator into a base class and two subclasses ServiceSASGenerator and DelegationSASGenreator. The
code in ServiceSASGenerator is copied from SASGenerator but the DelegationSASGenrator code is new. The
DelegationSASGenerator code demonstrates how to use Delegation SAS with minimal permissions, as would be used
by an authorization service such as Apache Ranger. Adding this to the tests helps us lock in this behavior.
Added a MockDelegationSASTokenProvider for testing User Delegation SAS.
Fixed the ITestAzureBlobFileSystemCheckAccess tests to assume oauth client ID so that they are ignored when that
is not configured.
To improve performance, AbfsInputStream/AbfsOutputStream re-use SAS tokens until the expiry is within 120 seconds.
After this a new SAS will be requested. The default period of 120 seconds can be changed using the configuration
setting "fs.azure.sas.token.renew.period.for.streams".
The SASTokenProvider operation names were updated to correspond better with the ADLS Gen2 REST API, since these
operations must be provided tokens with appropriate SAS parameters to succeed.
Support for the version 2.0 AAD authentication endpoint was added to AzureADAuthenticator.
The getFileStatus method was mistakenly calling the ADLS Gen2 Get Properties API which requires read permission
while the getFileStatus call only requires execute permission. ADLS Gen2 Get Status API is supposed to be used
for this purpose, so the underlying AbfsClient.getPathStatus API was updated with a includeProperties
parameter which is set to false for getFileStatus and true for getXAttr.
Added SASTokenProvider support for delete recursive.
Fixed bugs in AzureBlobFileSystem where public methods were not validating the Path by calling makeQualified. This is
necessary to avoid passing null paths and to convert relative paths into absolute paths.
Canonicalized the path used for root path internally so that root path can be used with SAS tokens, which requires
that the path in the URL and the path in the SAS token match. Internally the code was using
"//" instead of "/" for the root path, sometimes. Also related to this, the AzureBlobFileSystemStore.getRelativePath
API was updated so that we no longer remove and then add back a preceding forward / to paths.
To run ITestAzureBlobFileSystemDelegationSAS tests follow the instructions in testing_azure.md under the heading
"To run Delegation SAS test cases". You also need to set "fs.azure.enable.check.access" to true.
TEST RESULTS:
namespace.enabled=true
auth.type=SharedKey
-------------------
$mvn -T 1C -Dparallel-tests=abfs -Dscale -DtestsThreadCount=8 clean verify
Tests run: 63, Failures: 0, Errors: 0, Skipped: 0
Tests run: 432, Failures: 0, Errors: 0, Skipped: 41
Tests run: 206, Failures: 0, Errors: 0, Skipped: 24
namespace.enabled=false
auth.type=SharedKey
-------------------
$mvn -T 1C -Dparallel-tests=abfs -Dscale -DtestsThreadCount=8 clean verify
Tests run: 63, Failures: 0, Errors: 0, Skipped: 0
Tests run: 432, Failures: 0, Errors: 0, Skipped: 244
Tests run: 206, Failures: 0, Errors: 0, Skipped: 24
namespace.enabled=true
auth.type=SharedKey
sas.token.provider.type=MockDelegationSASTokenProvider
enable.check.access=true
-------------------
$mvn -T 1C -Dparallel-tests=abfs -Dscale -DtestsThreadCount=8 clean verify
Tests run: 63, Failures: 0, Errors: 0, Skipped: 0
Tests run: 432, Failures: 0, Errors: 0, Skipped: 33
Tests run: 206, Failures: 0, Errors: 0, Skipped: 24
namespace.enabled=true
auth.type=OAuth
-------------------
$mvn -T 1C -Dparallel-tests=abfs -Dscale -DtestsThreadCount=8 clean verify
Tests run: 63, Failures: 0, Errors: 0, Skipped: 0
Tests run: 432, Failures: 0, Errors: 1, Skipped: 74
Tests run: 206, Failures: 0, Errors: 0, Skipped: 140
Contributed by: Mehakmeet Singh
In some cases, ABFS-prefetch thread runs in the background which returns some bytes from the buffer and gives an extra readOp. Thus, making readOps values arbitrary and giving intermittent failures in some cases. Hence, readOps values of 2 or 3 are seen in different setups.
Contributed by Steve Loughran.
The S3Guard absence warning of HADOOP-16484 has been changed
so that by default the S3A connector only logs at debug
when the connection to the S3 Store does not have S3Guard
enabled.
The option to control this log level is now
fs.s3a.s3guard.disabled.warn.level
and can be one of: silent, inform, warn, fail.
On a failure, an ExitException is raised with exit code 49.
For details on this safety feature, consult the s3guard documentation.
HADOOP-16986. S3A to not need wildfly JAR on its classpath.
Contributed by Steve Loughran
This is a successor to HADOOP-16346, which enabled the S3A connector
to load the native openssl SSL libraries for better HTTPS performance.
That patch required wildfly.jar to be on the classpath. This
update:
* Makes wildfly.jar optional except in the special case that
"fs.s3a.ssl.channel.mode" is set to "openssl"
* Retains the declaration of wildfly.jar as a compile-time
dependency in the hadoop-aws POM. This means that unless
explicitly excluded, applications importing that published
maven artifact will, transitively, add the specified
wildfly JAR into their classpath for compilation/testing/
distribution.
This is done for packaging and to offer that optional
speedup. It is not mandatory: applications importing
the hadoop-aws POM can exclude it if they choose.
Contributed by Mukund Thakur.
If you set the log org.apache.hadoop.fs.s3a.impl.NetworkBinding
to DEBUG, then when the S3A bucket probe is made -the DNS address
of the S3 endpoint is calculated and printed.
This is useful to see if a large set of processes are all using
the same IP address from the pool of load balancers to which AWS
directs clients when an AWS S3 endpoint is resolved.
This can have implications for performance: if all clients
access the same load balancer performance may be suboptimal.
Note: if bucket probes are disabled, fs.s3a.bucket.probe = 0,
the DNS logging does not take place.
Change-Id: I21b3ac429dc0b543f03e357fdeb94c2d2a328dd8
Contributed by Steve Loughran.
This strips out all the -p preservation options which have already been
processed when uploading a file before deciding whether or not to query
the far end for the status of the (existing/uploaded) file to see if any
other attributes need changing.
This will avoid 404 caching-related issues in S3, wherein a newly created
file can have a 404 entry in the S3 load balancer's cache from the
probes for the file's existence prior to the upload.
It partially addresses a regression caused by HADOOP-8143,
"Change distcp to have -pb on by default" that causes a resurfacing
of HADOOP-13145, "In DistCp, prevent unnecessary getFileStatus call when
not preserving metadata"
add unit test, new ITest and then fix the issue: different schema, bucket == skip
factored out the underlying logic for unit testing; also moved
maybeAddTrailingSlash to S3AUtils (while retaining/forwarnding existing method
in S3AFS).
tested: london, sole failure is
testListingDelete[auth=true](org.apache.hadoop.fs.s3a.ITestS3GuardOutOfBandOperations)
filed HADOOP-16853
Change-Id: I4b8d0024469551eda0ec70b4968cba4abed405ed
Contributed by Bilahari T H.
The page limit is set in "fs.azure.list.max.results"; default value is 500.
There's currently a limit of 5000 in the store -there are no range checks
in the client code so that limit can be changed on the server without
any need to update the abfs connector.
Akira Ajisaka
Mehakmeet Singh
Yiqun Lin
Thomas Marquardt
Steve Loughran
Mehakmeet Singh
Karthik Amarnath
Sneha Vijayarajan
Masatake Iwasaki
bilaharith
Mukund Thakur
Ayush Saxena
Inigo Goiri
Mingliang Liu
Mukund Thakur
Brahma Reddy Battula
Sunil G
Nicholas Chammas
ishaniahuja
Gabor Bota