hadoop/dev-support/test-patch.sh

1007 lines
36 KiB
Bash
Executable File

#!/usr/bin/env bash
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#set -x
ulimit -n 1024
### Setup some variables.
### SVN_REVISION and BUILD_URL are set by Hudson if it is run by patch process
### Read variables from properties file
bindir=$(dirname $0)
# Defaults
if [ -z "$MAVEN_HOME" ]; then
MVN=mvn
else
MVN=$MAVEN_HOME/bin/mvn
fi
PROJECT_NAME=Hadoop
JENKINS=false
PATCH_DIR=/tmp
SUPPORT_DIR=/tmp
BASEDIR=$(pwd)
BUILD_NATIVE=true
PS=${PS:-ps}
AWK=${AWK:-awk}
WGET=${WGET:-wget}
SVN=${SVN:-svn}
GREP=${GREP:-grep}
PATCH=${PATCH:-patch}
DIFF=${DIFF:-diff}
JIRACLI=${JIRA:-jira}
FINDBUGS_HOME=${FINDBUGS_HOME}
FORREST_HOME=${FORREST_HOME}
ECLIPSE_HOME=${ECLIPSE_HOME}
###############################################################################
printUsage() {
echo "Usage: $0 [options] patch-file | defect-number"
echo
echo "Where:"
echo " patch-file is a local patch file containing the changes to test"
echo " defect-number is a JIRA defect number (e.g. 'HADOOP-1234') to test (Jenkins only)"
echo
echo "Options:"
echo "--patch-dir=<dir> The directory for working and output files (default '/tmp')"
echo "--basedir=<dir> The directory to apply the patch to (default current directory)"
echo "--mvn-cmd=<cmd> The 'mvn' command to use (default \$MAVEN_HOME/bin/mvn, or 'mvn')"
echo "--ps-cmd=<cmd> The 'ps' command to use (default 'ps')"
echo "--awk-cmd=<cmd> The 'awk' command to use (default 'awk')"
echo "--svn-cmd=<cmd> The 'svn' command to use (default 'svn')"
echo "--grep-cmd=<cmd> The 'grep' command to use (default 'grep')"
echo "--patch-cmd=<cmd> The 'patch' command to use (default 'patch')"
echo "--diff-cmd=<cmd> The 'diff' command to use (default 'diff')"
echo "--findbugs-home=<path> Findbugs home directory (default FINDBUGS_HOME environment variable)"
echo "--forrest-home=<path> Forrest home directory (default FORREST_HOME environment variable)"
echo "--dirty-workspace Allow the local SVN workspace to have uncommitted changes"
echo "--run-tests Run all tests below the base directory"
echo "--build-native=<bool> If true, then build native components (default 'true')"
echo
echo "Jenkins-only options:"
echo "--jenkins Run by Jenkins (runs tests and posts results to JIRA)"
echo "--support-dir=<dir> The directory to find support files in"
echo "--wget-cmd=<cmd> The 'wget' command to use (default 'wget')"
echo "--jira-cmd=<cmd> The 'jira' command to use (default 'jira')"
echo "--jira-password=<pw> The password for the 'jira' command"
echo "--eclipse-home=<path> Eclipse home directory (default ECLIPSE_HOME environment variable)"
}
###############################################################################
parseArgs() {
for i in $*
do
case $i in
--jenkins)
JENKINS=true
;;
--patch-dir=*)
PATCH_DIR=${i#*=}
;;
--support-dir=*)
SUPPORT_DIR=${i#*=}
;;
--basedir=*)
BASEDIR=${i#*=}
;;
--mvn-cmd=*)
MVN=${i#*=}
;;
--ps-cmd=*)
PS=${i#*=}
;;
--awk-cmd=*)
AWK=${i#*=}
;;
--wget-cmd=*)
WGET=${i#*=}
;;
--svn-cmd=*)
SVN=${i#*=}
;;
--grep-cmd=*)
GREP=${i#*=}
;;
--patch-cmd=*)
PATCH=${i#*=}
;;
--diff-cmd=*)
DIFF=${i#*=}
;;
--jira-cmd=*)
JIRACLI=${i#*=}
;;
--jira-password=*)
JIRA_PASSWD=${i#*=}
;;
--findbugs-home=*)
FINDBUGS_HOME=${i#*=}
;;
--forrest-home=*)
FORREST_HOME=${i#*=}
;;
--eclipse-home=*)
ECLIPSE_HOME=${i#*=}
;;
--dirty-workspace)
DIRTY_WORKSPACE=true
;;
--run-tests)
RUN_TESTS=true
;;
--build-native=*)
BUILD_NATIVE=${i#*=}
;;
*)
PATCH_OR_DEFECT=$i
;;
esac
done
if [[ $BUILD_NATIVE == "true" ]] ; then
NATIVE_PROFILE=-Pnative
REQUIRE_TEST_LIB_HADOOP=-Drequire.test.libhadoop
fi
if [ -z "$PATCH_OR_DEFECT" ]; then
printUsage
exit 1
fi
if [[ $JENKINS == "true" ]] ; then
echo "Running in Jenkins mode"
defect=$PATCH_OR_DEFECT
ECLIPSE_PROPERTY="-Declipse.home=$ECLIPSE_HOME"
else
echo "Running in developer mode"
JENKINS=false
### PATCH_FILE contains the location of the patchfile
PATCH_FILE=$PATCH_OR_DEFECT
if [[ ! -e "$PATCH_FILE" ]] ; then
echo "Unable to locate the patch file $PATCH_FILE"
cleanupAndExit 0
fi
### Check if $PATCH_DIR exists. If it does not exist, create a new directory
if [[ ! -e "$PATCH_DIR" ]] ; then
mkdir "$PATCH_DIR"
if [[ $? == 0 ]] ; then
echo "$PATCH_DIR has been created"
else
echo "Unable to create $PATCH_DIR"
cleanupAndExit 0
fi
fi
### Obtain the patch filename to append it to the version number
defect=`basename $PATCH_FILE`
fi
}
###############################################################################
checkout () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Testing patch for ${defect}."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
### When run by a developer, if the workspace contains modifications, do not continue
### unless the --dirty-workspace option was set
status=`$SVN stat --ignore-externals | sed -e '/^X[ ]*/D'`
if [[ $JENKINS == "false" ]] ; then
if [[ "$status" != "" && -z $DIRTY_WORKSPACE ]] ; then
echo "ERROR: can't run in a workspace that contains the following modifications"
echo "$status"
cleanupAndExit 1
fi
echo
else
cd $BASEDIR
$SVN revert -R .
rm -rf `$SVN status --no-ignore`
$SVN update
fi
return $?
}
###############################################################################
downloadPatch () {
### Download latest patch file (ignoring .htm and .html) when run from patch process
if [[ $JENKINS == "true" ]] ; then
$WGET -q -O $PATCH_DIR/jira http://issues.apache.org/jira/browse/$defect
if [[ `$GREP -c 'Patch Available' $PATCH_DIR/jira` == 0 ]] ; then
echo "$defect is not \"Patch Available\". Exiting."
cleanupAndExit 0
fi
relativePatchURL=`$GREP -o '"/jira/secure/attachment/[0-9]*/[^"]*' $PATCH_DIR/jira | $GREP -v -e 'htm[l]*$' | sort | tail -1 | $GREP -o '/jira/secure/attachment/[0-9]*/[^"]*'`
patchURL="http://issues.apache.org${relativePatchURL}"
patchNum=`echo $patchURL | $GREP -o '[0-9]*/' | $GREP -o '[0-9]*'`
echo "$defect patch is being downloaded at `date` from"
echo "$patchURL"
$WGET -q -O $PATCH_DIR/patch $patchURL
VERSION=${SVN_REVISION}_${defect}_PATCH-${patchNum}
JIRA_COMMENT="Here are the results of testing the latest attachment
$patchURL
against trunk revision ${SVN_REVISION}."
### Copy in any supporting files needed by this process
cp -r $SUPPORT_DIR/lib/* ./lib
#PENDING: cp -f $SUPPORT_DIR/etc/checkstyle* ./src/test
### Copy the patch file to $PATCH_DIR
else
VERSION=PATCH-${defect}
cp $PATCH_FILE $PATCH_DIR/patch
if [[ $? == 0 ]] ; then
echo "Patch file $PATCH_FILE copied to $PATCH_DIR"
else
echo "Could not copy $PATCH_FILE to $PATCH_DIR"
cleanupAndExit 0
fi
fi
}
###############################################################################
verifyPatch () {
# Before building, check to make sure that the patch is valid
$bindir/smart-apply-patch.sh $PATCH_DIR/patch dryrun
if [[ $? != 0 ]] ; then
echo "PATCH APPLICATION FAILED"
JIRA_COMMENT="$JIRA_COMMENT
{color:red}-1 patch{color}. The patch command could not apply the patch."
return 1
else
return 0
fi
}
###############################################################################
buildWithPatch () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Pre-build trunk to verify trunk stability and javac warnings"
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
if [[ ! -d hadoop-common-project ]]; then
cd $bindir/..
echo "Compiling $(pwd)"
echo "$MVN clean test -DskipTests > $PATCH_DIR/trunkCompile.txt 2>&1"
$MVN clean test -DskipTests > $PATCH_DIR/trunkCompile.txt 2>&1
if [[ $? != 0 ]] ; then
echo "Top-level trunk compilation is broken?"
cleanupAndExit 1
fi
cd -
fi
echo "Compiling $(pwd)"
echo "$MVN clean test -DskipTests -D${PROJECT_NAME}PatchProcess -Ptest-patch > $PATCH_DIR/trunkJavacWarnings.txt 2>&1"
$MVN clean test -DskipTests -D${PROJECT_NAME}PatchProcess -Ptest-patch > $PATCH_DIR/trunkJavacWarnings.txt 2>&1
if [[ $? != 0 ]] ; then
echo "Trunk compilation is broken?"
cleanupAndExit 1
fi
}
###############################################################################
### Check for @author tags in the patch
checkAuthor () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Checking there are no @author tags in the patch."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
authorTags=`$GREP -c -i '@author' $PATCH_DIR/patch`
echo "There appear to be $authorTags @author tags in the patch."
if [[ $authorTags != 0 ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
{color:red}-1 @author{color}. The patch appears to contain $authorTags @author tags which the Hadoop community has agreed to not allow in code contributions."
return 1
fi
JIRA_COMMENT="$JIRA_COMMENT
{color:green}+1 @author{color}. The patch does not contain any @author tags."
return 0
}
###############################################################################
### Check for tests in the patch
checkTests () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Checking there are new or changed tests in the patch."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
testReferences=`$GREP -c -i -e '^+++.*/test' $PATCH_DIR/patch`
echo "There appear to be $testReferences test files referenced in the patch."
if [[ $testReferences == 0 ]] ; then
if [[ $JENKINS == "true" ]] ; then
patchIsDoc=`$GREP -c -i 'title="documentation' $PATCH_DIR/jira`
if [[ $patchIsDoc != 0 ]] ; then
echo "The patch appears to be a documentation patch that doesn't require tests."
JIRA_COMMENT="$JIRA_COMMENT
{color:green}+0 tests included{color}. The patch appears to be a documentation patch that doesn't require tests."
return 0
fi
fi
JIRA_COMMENT="$JIRA_COMMENT
{color:red}-1 tests included{color}. The patch doesn't appear to include any new or modified tests.
Please justify why no new tests are needed for this patch.
Also please list what manual steps were performed to verify this patch."
return 1
fi
JIRA_COMMENT="$JIRA_COMMENT
{color:green}+1 tests included{color}. The patch appears to include $testReferences new or modified test files."
return 0
}
cleanUpXml () {
cd $BASEDIR/conf
for file in `ls *.xml.template`
do
rm -f `basename $file .template`
done
cd $BASEDIR
}
###############################################################################
### Attempt to apply the patch
applyPatch () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Applying patch."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
export PATCH
$bindir/smart-apply-patch.sh $PATCH_DIR/patch
if [[ $? != 0 ]] ; then
echo "PATCH APPLICATION FAILED"
JIRA_COMMENT="$JIRA_COMMENT
{color:red}-1 patch{color}. The patch command could not apply the patch."
return 1
fi
return 0
}
###############################################################################
### Check there are no javadoc warnings
checkJavadocWarnings () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Determining number of patched javadoc warnings."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
echo "$MVN clean test javadoc:javadoc -DskipTests -Pdocs -D${PROJECT_NAME}PatchProcess > $PATCH_DIR/patchJavadocWarnings.txt 2>&1"
if [ -d hadoop-project ]; then
(cd hadoop-project; $MVN install > /dev/null 2>&1)
fi
if [ -d hadoop-common-project/hadoop-annotations ]; then
(cd hadoop-common-project/hadoop-annotations; $MVN install > /dev/null 2>&1)
fi
$MVN clean test javadoc:javadoc -DskipTests -Pdocs -D${PROJECT_NAME}PatchProcess > $PATCH_DIR/patchJavadocWarnings.txt 2>&1
javadocWarnings=`$GREP '\[WARNING\]' $PATCH_DIR/patchJavadocWarnings.txt | $AWK '/Javadoc Warnings/,EOF' | $GREP warning | $AWK 'BEGIN {total = 0} {total += 1} END {print total}'`
echo ""
echo ""
echo "There appear to be $javadocWarnings javadoc warnings generated by the patched build."
#There are 6 warnings that are caused by things that are caused by using sun internal APIs.
OK_JAVADOC_WARNINGS=6;
### if current warnings greater than OK_JAVADOC_WARNINGS
if [[ $javadocWarnings -ne $OK_JAVADOC_WARNINGS ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
{color:red}-1 javadoc{color}. The javadoc tool appears to have generated `expr $(($javadocWarnings-$OK_JAVADOC_WARNINGS))` warning messages."
return 1
fi
JIRA_COMMENT="$JIRA_COMMENT
{color:green}+1 javadoc{color}. The javadoc tool did not generate any warning messages."
return 0
}
###############################################################################
### Check there are no changes in the number of Javac warnings
checkJavacWarnings () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Determining number of patched javac warnings."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
echo "$MVN clean test -DskipTests -D${PROJECT_NAME}PatchProcess $NATIVE_PROFILE -Ptest-patch > $PATCH_DIR/patchJavacWarnings.txt 2>&1"
$MVN clean test -DskipTests -D${PROJECT_NAME}PatchProcess $NATIVE_PROFILE -Ptest-patch > $PATCH_DIR/patchJavacWarnings.txt 2>&1
if [[ $? != 0 ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
{color:red}-1 javac{color:red}. The patch appears to cause the build to fail."
return 2
fi
### Compare trunk and patch javac warning numbers
if [[ -f $PATCH_DIR/patchJavacWarnings.txt ]] ; then
$GREP '\[WARNING\]' $PATCH_DIR/trunkJavacWarnings.txt > $PATCH_DIR/filteredTrunkJavacWarnings.txt
$GREP '\[WARNING\]' $PATCH_DIR/patchJavacWarnings.txt > $PATCH_DIR/filteredPatchJavacWarnings.txt
trunkJavacWarnings=`cat $PATCH_DIR/filteredTrunkJavacWarnings.txt | $AWK 'BEGIN {total = 0} {total += 1} END {print total}'`
patchJavacWarnings=`cat $PATCH_DIR/filteredPatchJavacWarnings.txt | $AWK 'BEGIN {total = 0} {total += 1} END {print total}'`
echo "There appear to be $trunkJavacWarnings javac compiler warnings before the patch and $patchJavacWarnings javac compiler warnings after applying the patch."
if [[ $patchJavacWarnings != "" && $trunkJavacWarnings != "" ]] ; then
if [[ $patchJavacWarnings -gt $trunkJavacWarnings ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
{color:red}-1 javac{color}. The applied patch generated $patchJavacWarnings javac compiler warnings (more than the trunk's current $trunkJavacWarnings warnings)."
$DIFF $PATCH_DIR/filteredTrunkJavacWarnings.txt $PATCH_DIR/filteredPatchJavacWarnings.txt > $PATCH_DIR/diffJavacWarnings.txt
JIRA_COMMENT_FOOTER="Javac warnings: $BUILD_URL/artifact/trunk/patchprocess/diffJavacWarnings.txt
$JIRA_COMMENT_FOOTER"
return 1
fi
fi
fi
JIRA_COMMENT="$JIRA_COMMENT
{color:green}+1 javac{color}. The applied patch does not increase the total number of javac compiler warnings."
return 0
}
###############################################################################
### Check there are no changes in the number of release audit (RAT) warnings
checkReleaseAuditWarnings () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Determining number of patched release audit warnings."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
echo "$MVN apache-rat:check -D${PROJECT_NAME}PatchProcess > $PATCH_DIR/patchReleaseAuditOutput.txt 2>&1"
$MVN apache-rat:check -D${PROJECT_NAME}PatchProcess > $PATCH_DIR/patchReleaseAuditOutput.txt 2>&1
find $BASEDIR -name rat.txt | xargs cat > $PATCH_DIR/patchReleaseAuditWarnings.txt
### Compare trunk and patch release audit warning numbers
if [[ -f $PATCH_DIR/patchReleaseAuditWarnings.txt ]] ; then
patchReleaseAuditWarnings=`$GREP -c '\!?????' $PATCH_DIR/patchReleaseAuditWarnings.txt`
echo ""
echo ""
echo "There appear to be $patchReleaseAuditWarnings release audit warnings after applying the patch."
if [[ $patchReleaseAuditWarnings != "" ]] ; then
if [[ $patchReleaseAuditWarnings -gt 0 ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
{color:red}-1 release audit{color}. The applied patch generated $patchReleaseAuditWarnings release audit warnings."
$GREP '\!?????' $PATCH_DIR/patchReleaseAuditWarnings.txt > $PATCH_DIR/patchReleaseAuditProblems.txt
echo "Lines that start with ????? in the release audit report indicate files that do not have an Apache license header." >> $PATCH_DIR/patchReleaseAuditProblems.txt
JIRA_COMMENT_FOOTER="Release audit warnings: $BUILD_URL/artifact/trunk/patchprocess/patchReleaseAuditProblems.txt
$JIRA_COMMENT_FOOTER"
return 1
fi
fi
fi
JIRA_COMMENT="$JIRA_COMMENT
{color:green}+1 release audit{color}. The applied patch does not increase the total number of release audit warnings."
return 0
}
###############################################################################
### Check there are no changes in the number of Checkstyle warnings
checkStyle () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Determining number of patched checkstyle warnings."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
echo "THIS IS NOT IMPLEMENTED YET"
echo ""
echo ""
echo "$MVN test checkstyle:checkstyle -DskipTests -D${PROJECT_NAME}PatchProcess"
$MVN test checkstyle:checkstyle -DskipTests -D${PROJECT_NAME}PatchProcess
JIRA_COMMENT_FOOTER="Checkstyle results: $BUILD_URL/artifact/trunk/build/test/checkstyle-errors.html
$JIRA_COMMENT_FOOTER"
### TODO: calculate actual patchStyleErrors
# patchStyleErrors=0
# if [[ $patchStyleErrors != 0 ]] ; then
# JIRA_COMMENT="$JIRA_COMMENT
#
# {color:red}-1 checkstyle{color}. The patch generated $patchStyleErrors code style errors."
# return 1
# fi
# JIRA_COMMENT="$JIRA_COMMENT
#
# {color:green}+1 checkstyle{color}. The patch generated 0 code style errors."
return 0
}
###############################################################################
### Install the new jars so tests and findbugs can find all of the updated jars
buildAndInstall () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Installing all of the jars"
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
echo "$MVN install -Dmaven.javadoc.skip=true -DskipTests -D${PROJECT_NAME}PatchProcess"
$MVN install -Dmaven.javadoc.skip=true -DskipTests -D${PROJECT_NAME}PatchProcess
return $?
}
###############################################################################
### Check there are no changes in the number of Findbugs warnings
checkFindbugsWarnings () {
findbugs_version=`${FINDBUGS_HOME}/bin/findbugs -version`
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Determining number of patched Findbugs warnings."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
modules=$(findModules)
rc=0
for module in $modules;
do
cd $module
echo " Running findbugs in $module"
module_suffix=`basename ${module}`
echo "$MVN clean test findbugs:findbugs -DskipTests -D${PROJECT_NAME}PatchProcess < /dev/null > $PATCH_DIR/patchFindBugsOutput${module_suffix}.txt 2>&1"
$MVN clean test findbugs:findbugs -DskipTests -D${PROJECT_NAME}PatchProcess < /dev/null > $PATCH_DIR/patchFindBugsOutput${module_suffix}.txt 2>&1
(( rc = rc + $? ))
cd -
done
if [ $rc != 0 ] ; then
JIRA_COMMENT="$JIRA_COMMENT
{color:red}-1 findbugs{color}. The patch appears to cause Findbugs (version ${findbugs_version}) to fail."
return 1
fi
findbugsWarnings=0
for file in $(find $BASEDIR -name findbugsXml.xml)
do
relative_file=${file#$BASEDIR/} # strip leading $BASEDIR prefix
if [ ! $relative_file == "target/findbugsXml.xml" ]; then
module_suffix=${relative_file%/target/findbugsXml.xml} # strip trailing path
module_suffix=`basename ${module_suffix}`
fi
cp $file $PATCH_DIR/patchFindbugsWarnings${module_suffix}.xml
$FINDBUGS_HOME/bin/setBugDatabaseInfo -timestamp "01/01/2000" \
$PATCH_DIR/patchFindbugsWarnings${module_suffix}.xml \
$PATCH_DIR/patchFindbugsWarnings${module_suffix}.xml
newFindbugsWarnings=`$FINDBUGS_HOME/bin/filterBugs -first "01/01/2000" $PATCH_DIR/patchFindbugsWarnings${module_suffix}.xml \
$PATCH_DIR/newPatchFindbugsWarnings${module_suffix}.xml | $AWK '{print $1}'`
echo "Found $newFindbugsWarnings Findbugs warnings ($file)"
findbugsWarnings=$((findbugsWarnings+newFindbugsWarnings))
$FINDBUGS_HOME/bin/convertXmlToText -html \
$PATCH_DIR/newPatchFindbugsWarnings${module_suffix}.xml \
$PATCH_DIR/newPatchFindbugsWarnings${module_suffix}.html
if [[ $newFindbugsWarnings > 0 ]] ; then
JIRA_COMMENT_FOOTER="Findbugs warnings: $BUILD_URL/artifact/trunk/patchprocess/newPatchFindbugsWarnings${module_suffix}.html
$JIRA_COMMENT_FOOTER"
fi
done
if [[ $findbugsWarnings -gt 0 ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
{color:red}-1 findbugs{color}. The patch appears to introduce $findbugsWarnings new Findbugs (version ${findbugs_version}) warnings."
return 1
fi
JIRA_COMMENT="$JIRA_COMMENT
{color:green}+1 findbugs{color}. The patch does not introduce any new Findbugs (version ${findbugs_version}) warnings."
return 0
}
###############################################################################
### Verify eclipse:eclipse works
checkEclipseGeneration () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Running mvn eclipse:eclipse."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
echo "$MVN eclipse:eclipse -D${PROJECT_NAME}PatchProcess > $PATCH_DIR/patchEclipseOutput.txt 2>&1"
$MVN eclipse:eclipse -D${PROJECT_NAME}PatchProcess > $PATCH_DIR/patchEclipseOutput.txt 2>&1
if [[ $? != 0 ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
{color:red}-1 eclipse:eclipse{color}. The patch failed to build with eclipse:eclipse."
return 1
fi
JIRA_COMMENT="$JIRA_COMMENT
{color:green}+1 eclipse:eclipse{color}. The patch built with eclipse:eclipse."
return 0
}
###############################################################################
### Run the tests
runTests () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Running tests."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
failed_tests=""
modules=$(findModules)
#
# If we are building hadoop-hdfs-project, we must build the native component
# of hadoop-common-project first. In order to accomplish this, we move the
# hadoop-hdfs subprojects to the end of the list so that common will come
# first.
#
# Of course, we may not be building hadoop-common at all-- in this case, we
# explicitly insert a mvn compile -Pnative of common, to ensure that the
# native libraries show up where we need them.
#
building_common=0
for module in $modules; do
if [[ $module == hadoop-hdfs-project* ]]; then
hdfs_modules="$hdfs_modules $module"
elif [[ $module == hadoop-common-project* ]]; then
ordered_modules="$ordered_modules $module"
building_common=1
else
ordered_modules="$ordered_modules $module"
fi
done
if [ -n "$hdfs_modules" ]; then
ordered_modules="$ordered_modules $hdfs_modules"
if [[ $building_common -eq 0 ]]; then
echo " Building hadoop-common with -Pnative in order to provide \
libhadoop.so to the hadoop-hdfs unit tests."
echo " $MVN compile $NATIVE_PROFILE -D${PROJECT_NAME}PatchProcess"
if ! $MVN compile $NATIVE_PROFILE -D${PROJECT_NAME}PatchProcess; then
JIRA_COMMENT="$JIRA_COMMENT
{color:red}-1 core tests{color}. Failed to build the native portion \
of hadoop-common prior to running the unit tests in $ordered_modules"
return 1
fi
fi
fi
for module in $ordered_modules; do
cd $module
echo " Running tests in $module"
echo " $MVN clean install -fn $NATIVE_PROFILE $REQUIRE_TEST_LIB_HADOOP -D${PROJECT_NAME}PatchProcess"
$MVN clean install -fn $NATIVE_PROFILE $REQUIRE_TEST_LIB_HADOOP -D${PROJECT_NAME}PatchProcess
module_failed_tests=`find . -name 'TEST*.xml' | xargs $GREP -l -E "<failure|<error" | sed -e "s|.*target/surefire-reports/TEST-| |g" | sed -e "s|\.xml||g"`
# With -fn mvn always exits with a 0 exit code. Because of this we need to
# find the errors instead of using the exit code. We assume that if the build
# failed a -1 is already given for that case
if [[ -n "$module_failed_tests" ]] ; then
failed_tests="${failed_tests}
${module_failed_tests}"
fi
cd -
done
if [[ -n "$failed_tests" ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
{color:red}-1 core tests{color}. The patch failed these unit tests in $modules:
$failed_tests"
return 1
fi
JIRA_COMMENT="$JIRA_COMMENT
{color:green}+1 core tests{color}. The patch passed unit tests in $modules."
return 0
}
###############################################################################
# Find the maven module containing the given file.
findModule (){
dir=`dirname $1`
while [ 1 ]
do
if [ -f "$dir/pom.xml" ]
then
echo $dir
return
else
dir=`dirname $dir`
fi
done
}
findModules () {
# Come up with a list of changed files into $TMP
TMP=/tmp/tmp.paths.$$
$GREP '^+++ \|^--- ' $PATCH_DIR/patch | cut -c '5-' | $GREP -v /dev/null | sort | uniq > $TMP
# if all of the lines start with a/ or b/, then this is a git patch that
# was generated without --no-prefix
if ! $GREP -qv '^a/\|^b/' $TMP ; then
sed -i -e 's,^[ab]/,,' $TMP
fi
# Now find all the modules that were changed
TMP_MODULES=/tmp/tmp.modules.$$
for file in $(cut -f 1 $TMP | sort | uniq); do
echo $(findModule $file) >> $TMP_MODULES
done
rm $TMP
# Filter out modules without code
CHANGED_MODULES=""
for module in $(cat $TMP_MODULES | sort | uniq); do
$GREP "<packaging>pom</packaging>" $module/pom.xml > /dev/null
if [ "$?" != 0 ]; then
CHANGED_MODULES="$CHANGED_MODULES $module"
fi
done
rm $TMP_MODULES
echo $CHANGED_MODULES
}
###############################################################################
### Run the test-contrib target
runContribTests () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Running contrib tests."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
if [[ `$GREP -c 'test-contrib' build.xml` == 0 ]] ; then
echo "No contrib tests in this project."
return 0
fi
### Kill any rogue build processes from the last attempt
$PS auxwww | $GREP ${PROJECT_NAME}PatchProcess | $AWK '{print $2}' | /usr/bin/xargs -t -I {} /bin/kill -9 {} > /dev/null
#echo "$ANT_HOME/bin/ant -Dversion="${VERSION}" $ECLIPSE_PROPERTY -DHadoopPatchProcess= -Dtest.junit.output.format=xml -Dtest.output=no test-contrib"
#$ANT_HOME/bin/ant -Dversion="${VERSION}" $ECLIPSE_PROPERTY -DHadoopPatchProcess= -Dtest.junit.output.format=xml -Dtest.output=no test-contrib
echo "NOP"
if [[ $? != 0 ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
{color:red}-1 contrib tests{color}. The patch failed contrib unit tests."
return 1
fi
JIRA_COMMENT="$JIRA_COMMENT
{color:green}+1 contrib tests{color}. The patch passed contrib unit tests."
return 0
}
###############################################################################
### Run the inject-system-faults target
checkInjectSystemFaults () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Checking the integrity of system test framework code."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
### Kill any rogue build processes from the last attempt
$PS auxwww | $GREP ${PROJECT_NAME}PatchProcess | $AWK '{print $2}' | /usr/bin/xargs -t -I {} /bin/kill -9 {} > /dev/null
#echo "$ANT_HOME/bin/ant -Dversion="${VERSION}" -DHadoopPatchProcess= -Dtest.junit.output.format=xml -Dtest.output=no -Dcompile.c++=yes -Dforrest.home=$FORREST_HOME inject-system-faults"
#$ANT_HOME/bin/ant -Dversion="${VERSION}" -DHadoopPatchProcess= -Dtest.junit.output.format=xml -Dtest.output=no -Dcompile.c++=yes -Dforrest.home=$FORREST_HOME inject-system-faults
echo "NOP"
return 0
if [[ $? != 0 ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
{color:red}-1 system test framework{color}. The patch failed system test framework compile."
return 1
fi
JIRA_COMMENT="$JIRA_COMMENT
{color:green}+1 system test framework{color}. The patch passed system test framework compile."
return 0
}
###############################################################################
### Submit a comment to the defect's Jira
submitJiraComment () {
local result=$1
### Do not output the value of JIRA_COMMENT_FOOTER when run by a developer
if [[ $JENKINS == "false" ]] ; then
JIRA_COMMENT_FOOTER=""
fi
if [[ $result == 0 ]] ; then
comment="{color:green}+1 overall{color}. $JIRA_COMMENT
$JIRA_COMMENT_FOOTER"
else
comment="{color:red}-1 overall{color}. $JIRA_COMMENT
$JIRA_COMMENT_FOOTER"
fi
### Output the test result to the console
echo "
$comment"
if [[ $JENKINS == "true" ]] ; then
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Adding comment to Jira."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
### Update Jira with a comment
export USER=hudson
$JIRACLI -s https://issues.apache.org/jira -a addcomment -u hadoopqa -p $JIRA_PASSWD --comment "$comment" --issue $defect
$JIRACLI -s https://issues.apache.org/jira -a logout -u hadoopqa -p $JIRA_PASSWD
fi
}
###############################################################################
### Cleanup files
cleanupAndExit () {
local result=$1
if [[ $JENKINS == "true" ]] ; then
if [ -e "$PATCH_DIR" ] ; then
mv $PATCH_DIR $BASEDIR
fi
fi
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Finished build."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
exit $result
}
###############################################################################
###############################################################################
###############################################################################
JIRA_COMMENT=""
JIRA_COMMENT_FOOTER="Console output: $BUILD_URL/console
This message is automatically generated."
### Check if arguments to the script have been specified properly or not
parseArgs $@
cd $BASEDIR
checkout
RESULT=$?
if [[ $JENKINS == "true" ]] ; then
if [[ $RESULT != 0 ]] ; then
exit 100
fi
fi
downloadPatch
verifyPatch
(( RESULT = RESULT + $? ))
if [[ $RESULT != 0 ]] ; then
submitJiraComment 1
cleanupAndExit 1
fi
buildWithPatch
checkAuthor
(( RESULT = RESULT + $? ))
if [[ $JENKINS == "true" ]] ; then
cleanUpXml
fi
checkTests
(( RESULT = RESULT + $? ))
applyPatch
APPLY_PATCH_RET=$?
(( RESULT = RESULT + $APPLY_PATCH_RET ))
if [[ $APPLY_PATCH_RET != 0 ]] ; then
submitJiraComment 1
cleanupAndExit 1
fi
checkJavacWarnings
JAVAC_RET=$?
#2 is returned if the code could not compile
if [[ $JAVAC_RET == 2 ]] ; then
submitJiraComment 1
cleanupAndExit 1
fi
(( RESULT = RESULT + $JAVAC_RET ))
checkJavadocWarnings
(( RESULT = RESULT + $? ))
### Checkstyle not implemented yet
#checkStyle
#(( RESULT = RESULT + $? ))
buildAndInstall
checkEclipseGeneration
(( RESULT = RESULT + $? ))
checkFindbugsWarnings
(( RESULT = RESULT + $? ))
checkReleaseAuditWarnings
(( RESULT = RESULT + $? ))
### Run tests for Jenkins or if explictly asked for by a developer
if [[ $JENKINS == "true" || $RUN_TESTS == "true" ]] ; then
runTests
(( RESULT = RESULT + $? ))
runContribTests
(( RESULT = RESULT + $? ))
fi
checkInjectSystemFaults
(( RESULT = RESULT + $? ))
JIRA_COMMENT_FOOTER="Test results: $BUILD_URL/testReport/
$JIRA_COMMENT_FOOTER"
submitJiraComment $RESULT
cleanupAndExit $RESULT