hbase/dev-support/hbasetests.sh

429 lines
13 KiB
Bash
Raw Normal View History

#!/usr/bin/env bash
##
# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements. See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership. The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
##
#
# This script:
# - analyse the content of the .java test file to split them between
# small/medium/large
# - launch the small tests in a single maven, with surefire
# parallelisation activated
# - launch the medium & large in two maven, parallelized
# - the flaky tests are run at the end, not parallelized
# - present a small report of the global results
# - copy the failed test reports with prefix 'fail_' and a timestamp
# to protect them from a later deletion by maven
# - if configured for, relaunch the tests in errors
#
#
# Caveats:
# - multiple maven are launch, hence there can be recompilation
# between the tests if a file is modified. For non flaky tests and
# parallelization, the frame is the time to execute the small tests,
# so it's around 4 minutes.
# - Note that surefire is buggy, and the results presented while
# running may be wrong. For example, it can says that a class tests
# have 5 errors. When you look at the file it wrote, it says that the
# 2 tests are ok, and in the class there are actually two tests
# methods, not five. If you generate the report at the end with
# surefire-report it's fine however.
#
######################################### parameters
#mvn test -Dtest=org.apache.hadoop.hbase.regionserver.TestScanWithBloomError $*
#exit
#set to 0 to run only developpers tests (small & medium categories)
runAllTests=0
#set to 1 to replay the failed tests. Previous reports are kept in
# fail_ files
replayFailed=0
#set to 0 to run all medium & large tests in a single maven operation
# instead of two
parallelMaven=1
#harcoded list of tests that often fail. We don't want to add any
# complexity around then so there are not run in parallel but after
# the others
#The ',' at the end is mandatory
flakyTests=
#org.apache.hadoop.hbase.mapreduce.TestTableInputFormatScan,org.apache.hadoop.hbase.catalog.TestMetaReaderEditorNoCluster,org.apache.hadoop.hbase.catalog.TestMetaReaderEditor,org.apache.hadoop.hbase.mapreduce.TestHFileOutputFormat,org.apache.hadoop.hbase.mapred.TestTableMapReduce,org.apache.hadoop.hbase.coprocessor.TestMasterCoprocessorExceptionWithAbort,org.apache.hadoop.hbase.coprocessor.TestMasterCoprocessorExceptionWithRemove,org.apache.hadoop.hbase.client.TestAdmin,org.apache.hadoop.hbase.master.TestMasterFailover,org.apache.hadoop.hbase.regionserver.wal.TestLogRolling,org.apache.hadoop.hbase.master.TestDistributedLogSplitting,org.apache.hadoop.hbase.master.TestMasterRestartAfterDisablingTable,org.apache.hadoop.hbase.TestGlobalMemStoreSize,
######################################### Internal parameters
#directory used for surefire & the source code.
#They should not need to be modified
#The final / is mandatory
rootTestClassDirectory="./src/test/java/"
surefireReportDirectory="./target/surefire-reports/"
#variable to use to debug the script without launching the tests
mvnCommand="mvn "
#mvnCommand="echo $mvnCommand"
######################################### Functions
#get the list of the process considered as dead
# i.e.: in the same group as the script and with a ppid of 1
# We do this because surefire can leave some dead process, so
# we will jstack them and kill them
function createListDeadProcess {
id=$$
listDeadProcess=""
#list of the process with a ppid of 1
sonProcess=`ps -o pid= --ppid 1`
#then the process with a pgid of the script
for pId in $sonProcess
do
pgid=`ps -o pgid= --pid $pId | sed 's/ //g'`
if [ "$pgid" == "$id" ]
then
listDeadProcess="$pId $listDeadProcess"
fi
done
}
#kill the java sub process, if any, with a kill and a kill -9
#When maven/surefire fails, it lefts some process with a ppid==1
#we're going to find them with the pgid, print the stack and kill them.
function cleanProcess {
id=$$
createListDeadProcess
for pId in $listDeadProcess
do
echo "$pId survived, I will kill if it's a java process. 'ps' says:"
ps -fj --pid $pId
name=`ps -o comm= --pid $pId`
if [ "$name" == "java" ]
then
echo "$pId, java sub process of $id, is still running, killing it with a standard kill"
echo "Stack for $pId before kill:"
jstack -F -l $pId
kill $pId
echo "kill sent, waiting for 30 seconds"
sleep 30
son=`ps -o pid= --pid $pId | wc -l`
if (test $son -gt 0)
then
echo "$pId, java sub process of $id, is still running after a standard kill, using kill -9 now"
echo "Stack for $pId before kill -9:"
jstack -F -l $pId
kill -9 $pId
echo "kill sent, waiting for 2 seconds"
sleep 2
echo "Process $pId killed by kill -9"
else
echo "Process $pId killed by standard kill -15"
fi
else
echo "$pId is not a java process (it's $name), I don't kill it."
fi
done
createListDeadProcess
if (test ${#listDeadProcess} -gt 0)
then
echo "There are still $sonProcess for process $id left."
else
echo "Process $id clean, no son process left"
fi
}
#count the number of ',' in a string
# used to calculate the number of class
#write $count
function countClasses {
cars=`echo $1 | sed 's/[^,]//g' | wc -c `
count=$((cars - 1))
}
######################################### script
echo "Starting Script. Possible parameters are: runAllTests, replayFailed, nonParallelMaven"
echo "Other parameters are sent to maven"
#We will use this value at the end to calculate the execution time
startTime=`date +%s`
#look in the arguments if we override default values
for arg in "$@"
do
if [ $arg == "runAllTests" ]
then
runAllTests=1
else
if [ $arg == "replayFailed" ]
then
replayFailed=1
else
if [ $arg == "nonParallelMaven" ]
then
parallelMaven=0
else
args=$args" $arg"
fi
fi
fi
done
testsList=$(find $rootTestClassDirectory -name "Test*.java")
#for all java test files, let see if they contain the pattern
# to recognize the category
for testFile in $testsList
do
lenPath=$((${#rootTestClassDirectory}))
len=$((${#testFile} - $lenPath - 5)) # len(".java") == 5
shortTestFile=${testFile:lenPath:$len}
testName=$(echo $shortTestFile | sed 's/\//\./g')
#The ',' is used in the grep pattern as we don't want to catch
# partial name
isFlaky=$((`echo $flakyTests | grep "$testName," | wc -l`))
if (test $isFlaky -eq 0)
then
isSmall=0
isMedium=0
isLarge=0
# determine the category of the test by greping into the source code
isMedium=`grep "@Category" $testFile | grep "MediumTests.class" | wc -l`
if (test $isMedium -eq 0)
then
isLarge=`grep "@Category" $testFile | grep "LargeTests.class" | wc -l`
if (test $isLarge -eq 0)
then
isSmall=`grep "@Category" $testFile | grep "SmallTests.class" | wc -l`
if (test $isSmall -eq 0)
then
echo "$testName is not categorized, so it won't be tested"
else
#sanity check on small tests
isStrange=`grep "\.startMini" $testFile | wc -l`
if (test $isStrange -gt 0)
then
echo "$testFile is categorized as 'small' but contains a .startMini string. Keep it as small anyway, but it's strange."
fi
fi
fi
fi
#put the test in the right list
if (test $isSmall -gt 0)
then
smallList="$smallList,$testName"
fi
if (test $isMedium -gt 0)
then
mediumList="$mediumList,$testName"
fi
if (test $isLarge -gt 0)
then
largeList="$largeList,$testName"
fi
fi
done
#remove the ',' at the beginning
smallList=${smallList:1:${#smallList}}
mediumList=${mediumList:1:${#mediumList}}
largeList=${largeList:1:${#largeList}}
countClasses $smallList
echo "There are $count small tests"
countClasses $mediumList
echo "There are $count medium tests"
countClasses $largeList
echo "There are $count large tests"
#do we launch only dev or all tests?
if (test $runAllTests -eq 1)
then
echo "Running all tests, small, medium and large"
longList="$mediumList,$largeList"
else
echo "Running developper tests only, small and medium categories"
longList=$mediumList
fi
#medium and large test can be run in //, so we're
#going to create two lists
nextList=1
for testClass in `echo $longList | sed 's/,/ /g'`
do
if (test $nextList -eq 1)
then
nextList=2
runList1=$runList1,$testClass
else
nextList=1
runList2=$runList2,$testClass
fi
done
#remove the ',' at the beginning
runList1=${runList1:1:${#runList1}}
runList2=${runList2:1:${#runList2}}
#now we can run the tests, at last!
echo "Running small tests with one maven instance, in parallel"
#echo Small tests are $smallList
$mvnCommand -P singleJVMTests test -Dtest=$smallList $args
cleanProcess
exeTime=$(((`date +%s` - $startTime)/60))
echo "Small tests executed after $exeTime minutes"
if (test $parallelMaven -gt 0)
then
echo "Running tests with two maven instances in parallel"
$mvnCommand -P nonParallelTests test -Dtest=$runList1 $args &
#give some time to the fist process if there is anything to compile
sleep 30
$mvnCommand -P nonParallelTests test -Dtest=$runList2 $args
#wait for forked process to finish
wait
cleanProcess
exeTime=$(((`date +%s` - $startTime)/60))
echo "Medium and large (if selected) tests executed after $exeTime minutes"
#now the flaky tests, alone, if the list is not empty
# we test on size greater then 5 to remove any "," effect
if (test $runAllTests -eq 1 && test ${#flakyTests} -gt 5)
then
echo "Running flaky tests"
$mvnCommand -P nonParallelTests test -Dtest=$flakyTests $args
cleanProcess
exeTime=$(((`date +%s` - $startTime)/60))
echo "Flaky tests executed after $exeTime minutes"
fi
else
echo "Running tests with a single maven instance, no parallelization"
$mvnCommand -P nonParallelTests test -Dtest=$runList1,$runList2,$flakyTests $args
cleanProcess
exeTime=$(((`date +%s` - $startTime)/60))
echo "Single maven instance tests executed after $exeTime minutes"
fi
#let's analyze the results
fullRunList="$smallList,$longList"
if (test $runAllTests -eq 1)
then
fullRunList="$fullRunList,$flakyTests"
fi
#single timestamp to ensure files uniquess.
timestamp=`date +%s`
#some counters, initialized because they may not be touched
# in the loop
errorCounter=0
sucessCounter=0
notFinishedCounter=0
for testClass in `echo $fullRunList | sed 's/,/ /g'`
do
reportFile=$surefireReportDirectory/$testClass.txt
outputReportFile=$surefireReportDirectory/$testClass-output.txt
if [ -s $reportFile ];
then
isError=`grep FAILURE $reportFile | wc -l`
if (test $isError -gt 0)
then
errorList="$errorList,$testClass"
errorCounter=$(($errorCounter + 1))
#let's copy the files if we want to use it later
cp $reportFile "$surefireReportDirectory/fail_$timestamp.$testClass.txt"
if [ -s $reportFile ];
then
cp $outputReportFile "$surefireReportDirectory/fail_$timestamp.$testClass"-output.txt""
fi
else
sucessCounter=$(($sucessCounter +1))
fi
else
#report file does not exist or is empty => the test didn't finish
notFinishedCounter=$(($notFinishedCounter + 1))
notFinishedList="$notFinishedList,$testClass"
fi
done
#list of all tests that failed
replayList="$notFinishedList""$errorList"
#remove the ',' at the beginning
notFinishedList=${notFinishedList:1:${#notFinishedList}}
errorList=${errorList:1:${#errorList}}
replayList=${replayList:1:${#replayList}}
#make it simpler to read by removing the org.* stuff from the name
notFinishedPresList=`echo $notFinishedList | sed 's/org.apache.hadoop.hbase.//g' | sed 's/,/, /g'`
errorPresList=`echo $errorList | sed 's/org.apache.hadoop.hbase.//g' | sed 's/,/, /g'`
#calculate the execution time
curTime=`date +%s`
exeTime=$((($curTime - $startTime)/60))
echo "##########################"
echo "$sucessCounter tests executed successfully"
echo "$errorCounter tests are in error"
echo "$notFinishedCounter tests didn't finish"
echo
echo "Tests in error are: $errorPresList"
echo "Tests that didn't finish are: $notFinishedPresList"
echo
echo "Execution time in minutes: $exeTime"
echo "##########################"
if (test ${#replayList} -gt 0)
then
if (test $replayFailed -gt 0)
then
echo "Replaying all tests that failed"
$mvnCommand -P nonParallelTests test -Dtest=$replayList $args
echo "Replaying done"
fi
fi
exit