Expose an argument on the `count` command which is passed to the
`setCacheBlocks` method on the Scan which the count command uses.
This is a quick and dirty approach to read all of the blocks for a table
into the block cache.
* Raise an error when the value isn't a boolean or the expected string
Closes#2650
Signed-off-by: Zach York <zyork@apache.org>
Signed-off-by: Peter Somogyi <psomogyi@apache.org>
* HBASE-25050 - We initialize Filesystems more than once.
* Ensuring that calling the FS#get() will only ensure FS init.
* Fix for testfailures. We should pass the entire path and no the scheme
alone
* Cases where we don't have a scheme for the URI
* Address review comments
* Add some comments on why FS#get(URI, conf) is getting used
* Adding the comment as per Sean's review
Signed-off-by: Sean Busbey <busbey@apache.org>
Signed-off-by: Michael Stack <stack@apache.org>
Update the design document to the state as of not. Adds a paragraph
on the preamble. See discussion on end of HBASE-25284.
Signed-off-by: Duo Zhang <zhangduo@apache.org>
hbase-client/src/main/java/org/apache/hadoop/hbase/client/CatalogReplicaLoadBalanceSelector.java
hbase-client/src/main/java/org/apache/hadoop/hbase/client/CatalogReplicaLoadBalanceSelectorFactory.java
hbase-client/src/main/java/org/apache/hadoop/hbase/client/CatalogReplicaLoadBalanceSimpleSelector.java
hbase-client/src/main/java/org/apache/hadoop/hbase/client/CatalogReplicaMode.java
Make the leading license comment opener align on all these new
files.... one star rather than two.
hbase-server/src/main/java/org/apache/hadoop/hbase/replication/regionserver/CatalogReplicationSource.java
Add some comment better situating the catalogreplicationsource
specialization.
hbase-server/src/main/java/org/apache/hadoop/hbase/replication/regionserver/ReplicationSourceManager.java
Add comment how this differs from replicationsource factory and why no
need to keep offset up in zk.
src/main/asciidoc/_chapters/architecture.adoc
Clean up the read replica of META doc. Introduce the new read replica
liveness on META and the new 'LoadBalance' feature (with warnings).
General edit.
It adds load balance support for meta lookup in AsyncTableRegionLocator.
The existing meta replica mode is renamed as "HedgedRead", client sends scan request to the primary meta replica region first,
if response is not back within a configured amount of time, it will send scan requests to all meta replica regions and
take the first response. On top of the existing mode, a new mode "LoadBalance" is introduced. In this mode, client first
choose a meta replica region to send scan request. If the response is stale, it may send the request to another meta replica region or
the primary region. In this mode, meta scan requests are load balanced across all replica regions with the primary mode as
the ultimate source of truth.
Two new config knobs are added:
1. hbase.locator.meta.replicas.mode
Valid options are "None", "HedgedRead" and "LoadBalance", they are case insensitive. The default mode is "None".
2. hbase.locator.meta.replicas.mode.loadbalance.selector
The load balance alogrithm to select a meta replica to send the requests.
Only org.apache.hadoop.hbase.client.CatalogReplicaLoadBalanceReplicaSimpleSelector.class
is supported for now, which is the default as well. The algorithm works as follows:
a. Clients select a randome meta replica region to send the requests if there is no entry for the location in the stale
location cache.
b. If the location from one meta replica region is stale, a stale entry will be created in the statle location cache
for the region.
c. Clients select the primary meta region if the location is in the stale location cache.
d. The stale location cache entries time out in 3 seconds.
If there is no "hbase.locator.meta.replicas.mode" configured, it will check the config knob "hbase.meta.replicas.use".
If "hbase.meta.replicas.use" is configured, the mode will be set to "HedgedRead".
warmupRegion called by Master on Region move will instatiate
the meta WALProvider as part of its action making it so
it is already created by the time we go to open the
hbsae:meta Region. Accommodate meta walProvider
being already up.
hbase-server/src/main/java/org/apache/hadoop/hbase/regionserver/handler/AssignRegionHandler.java
hbase-server/src/main/java/org/apache/hadoop/hbase/regionserver/handler/UnassignRegionHandler.java
Pass regionInfo. Needed internally.
hbase-server/src/main/java/org/apache/hadoop/hbase/replication/regionserver/ReplicationSourceManager.java
Add handling if meta wal provider already instantiated when
addCatalogReplicationSource runs.
hbase-server/src/test/java/org/apache/hadoop/hbase/replication/regionserver/TestMetaRegionReplicaReplicationEndpoint.java
Add exercising moving meta around between servers. Test replication
keeps working.
* HBASE-25055 Add ReplicationSource for meta WALs; add enable/disable when hbase:meta assigned to RS
Fill in gap left by HBASE-11183 'Timeline Consistent region replicas - Phase 2 design'.
HBASE-11183 left off implementing 'async WAL Replication' on the hbase:meta
Table; hbase:meta Table could only do Phase 1 Region Replicas reading
the primary Regions' hfiles. Here we add 'async WAL Replication' to
hbase:meta so Replicas can be more current with the primary's changes.
Adds a 'special' ReplicationSource that reads hbase:meta WAL files and replicates
all edits to the configured in-cluster endpoint (Defaults to the
RegionReadReplicaEndpoint.class -- set hbase.region.replica.catalog.replication to
target a different endpoint implementation).
Set hbase.region.replica.replication.catalog.enabled to enable async WAL
Replication for hbase:meta region replicas. Its off by default.
The CatalogReplicationSource for async WAL Replication of hbase:meta does
NOT need to keep up WAL offset or a queue of WALs-to-replicate in the
replication queue store as is done in other ReplicationSource implementations;
the CatalogReplicationSource is for Region Replicas only. General
Replication does not replicate hbase:meta. hbase:meta Region Replicas reset
on crash of the primary replica so there is no need to 'recover'
replication that was running on the crashed server.
Because it so different in operation, the CatalogReplicationSource is bolted
on to the side of the ReplicationSourceManager. It is lazily
instantiated to match the lazy instantiation of the hbase:meta
WALProvider, created and started on the open of the first Region of an
hbase:meta table. Thereafter it stays up till the process dies, even if
all hbase:meta Regions have moved off the server, in case a hbase:meta
Region is moved back (Doing this latter simplifies the implementation)
hbase-server/src/main/java/org/apache/hadoop/hbase/regionserver/HRegionServer.java
Read configuration to see if we need to wait on setting a Region read-enabled
(if so, replicas will only flip to enable read after confirming a
flush of the primary so they for sure are a replica of a known point)
hbase-server/src/main/java/org/apache/hadoop/hbase/regionserver/handler/AssignRegionHandler.java
If configured, on open of hbase:meta, ask the ReplicationSourceManager
to add a ReplicationSource (if it hasn't already).
hbase-server/src/main/java/org/apache/hadoop/hbase/regionserver/handler/RegionReplicaFlushHandler.java
Edit log message.
hbase-server/src/main/java/org/apache/hadoop/hbase/regionserver/handler/UnassignRegionHandler.java
If configured, on close of hbase:meta, update ReplicationSourceManager
that a source Region has closed.
hbase-server/src/main/java/org/apache/hadoop/hbase/replication/regionserver/ReplicationSourceFactory.java
javadoc and make constructor private.
hbase-server/src/main/java/org/apache/hadoop/hbase/replication/regionserver/ReplicationSourceInterface.java
Add logPositionAndCleanOldLogs w/ default of the old behavior so
CatalogReplicationSource can bypass updating store with WAL position,
etc.
hbase-server/src/main/java/org/apache/hadoop/hbase/replication/regionserver/ReplicationSourceManager.java
Add creation and start of an CatalogReplicationSource.
hbase-server/src/main/java/org/apache/hadoop/hbase/replication/regionserver/ReplicationSourceShipper.java
Go via ReplicationSource when calling logPostionAndCleanOldLogs so new RS can intercept.
hbase-server/src/main/java/org/apache/hadoop/hbase/replication/regionserver/WALFileLengthProvider.java
Javadoc.
hbase-server/src/main/java/org/apache/hadoop/hbase/util/ServerRegionReplicaUtil.java
Add utility for reading configurations for hbase:meta region replicas.
hbase-server/src/main/java/org/apache/hadoop/hbase/wal/WALFactory.java
Javadoc.
hbase-server/src/test/java/org/apache/hadoop/hbase/replication/regionserver/TestRegionReplicaReplicationEndpoint.java
Use define.
hbase-server/src/main/java/org/apache/hadoop/hbase/replication/regionserver/CatalogReplicationSource.java
Specical version of ReplicationSource for Region Replicas on hbase:meta.
hbase-server/src/main/java/org/apache/hadoop/hbase/replication/regionserver/CatalogReplicationSourcePeer.java
Needs a special peer too (peers are baked into replication though we don't use 'peers' here)
hbase-server/src/test/java/org/apache/hadoop/hbase/replication/regionserver/TestMetaRegionReplicaReplicationEndpoint.java
hbase-server/src/test/java/org/apache/hadoop/hbase/wal/TestWALProvider.java
Tests.
Signed-off-by: Duo Zhang <zhangduo@apache.org>
Signed-off-by: Huaxiang Sun <huaxiangsun@apache.com>
Pass WALFactory to Replication instead of WALProvider. WALFactory has all
WALProviders in it, not just the user-space WALProvider. Do this so
ReplicationService has access to all WALProviders in the Server (To be
exploited by the follow-on patch in HBASE-25055)
HBase UI is currently using in bootstrap 3.3.7. This version is vulnerable to 4
medium CVEs (CVE-2018-14040, CVE-2018-14041, CVE-2018-14042, and CVE-2019-8331).
Details on all the bootstrap versions and vulnerabilities is
here: https://snyk.io/vuln/npm:bootstrap
Upgrading to bootstrap 4 would be nice, but potentially more work to do. We
should at least upgrade to the latest bootstrap 3, which is 3.4.1 currently.
closes#2661
Signed-off-by: Wellington Chevreuil <wchevreuil@apache.org>
Signed-off-by: Peter Somogyi <psomogyi@apache.org>
Add new metric rpcFullScanRequestCount to track number of requests that are full region scans. Can be used to notify user to check if this is truly intended.
Signed-off-by Anoop Sam John <anoopsamjohn@apache.org>
Signed-off-by Ramkrishna S Vasudevan <ramkrishna@apache.org>
HBASE-25267 Make SSL keystore type configurable in HBase RESTServer
In this patch I want to introduce the hbase.rest.ssl.keystore.type parameter,
enabling us to customize the keystore type for the REST server. If the
parameter is not provided, then we should fall-back to the current behaviour
(which assumes keystore type JKS).
This is similar to how we already configure the InfoServer objects with the
ssl.server.keystore.type parameter to set up HTTPS for the various admin UIs.
Signed-off-by: Wellington Chevreuil <wellington.chevreuil@gmail.com>
Signed-off-by: Balazs Meszaros <meszibalu@apache.org>
Signed-off-by: Sean Busbey <busbey@apache.org>
* HBASE-25187 Improve SizeCachedKV variants initialization
* HBASE-25187 Improve SizeCachedKV variants initialization
* The BBKeyValue also can be optimized
* Change for SizeCachedKeyValue
* Addressing revew comments
* Fixing checkstyle and spot bugs comments
* Spot bug fix for hashCode
* Minor updates make the rowLen as short and some consturctor formatting
* Change two more places where there was a cast
- upgrade our default jruby to 9.2.13.0
- this major JRuby version update changes the Ruby compatibility from Ruby 2.3 to Ruby 2.5
- use a custom IRB prompt to convey similar information to before
- update the joni and jcoding dependencies to match this version of jruby-complete
closes#2308
Signed-off-by: stack <stack@apache.org>
Signed-off-by: Josh Elser <elserj@apache.org>
Signed-off-by: Sean Busbey <busbey@apache.org>
Prior to this patch hbase always used the MD5 hash algorithm to store a hash for encryption keys.
This hash is needed to verify the secret key of the subject. (e.g. making
sure that the same secrey key is used during encrypted HFile read and write).
The MD5 algorithm is considered weak, and can not be used in some
(e.g. FIPS compliant) clusters.
In this patch we:
- add a config parameter to globally enable/disable column family encryption (def enabled)
- introduce a backward compatible way of specifying the hash algorithm.
This enable us to use newer and more secure hash algorithms like SHA-384
or SHA-512 (which are FIPS compliant).
- add a config parameter to fail if an hfile is encountered that uses a
different hash algorithm than the one currently configured to ease validation after
migrating key hash algorithms (def disabled)
Closes#2539
Signed-off-by: Sean Busbey <busbey@apache.org>
Signed-off-by: Esteban Gutierrez <esteban@apache.org>
Make protobuf fields add post-2.0.0 release marked 'required' instead
be 'optional' so migrations from 2.0.x to 2.1+ or 2.2+ succeeds.
Signed-off-by: Viraj Jasani vjasani@apache.org
Qi Yu
niuyulin
Richard Antal
Josh Elser
tianhang
ramkrish86
XinSun
Bo Cui
Michael Stack
stack
Huaxiang Sun
Baiqiang Zhao
Sean Busbey
Mate Szalay-Beko
gkanade
clarax
Hossein Zolfi
Duo Zhang
Peter Somogyi
WenFeiYi
Mate Szalay-Beko
Norbert Kalmar
gvprathyusha6