* HBASE-27088 IntegrationLoadTestCommonCrawl async load improvements
- Use an async client and work stealing executor for parallelism during loads.
- Remove the verification read retries, these are not that effective during
replication lag anyway.
- Increase max task attempts because S3 might throttle.
- Implement a side task that exercises Increments by extracting urls from
content and updating a cf that tracks referrer counts. These are not
validated at this time. It could be possible to log the increments, sum
them with a reducer, and then verify the total, but this is left as a
future exercise.
Signed-off-by: Viraj Jasani <vjasani@apache.org>
* Sum RPC time for writes (loader) and reads (verifier) and mutation bytes submitted. Expose as job counters.
* Fix an issue with completion chaining
* Pause loading if too many operations are in flight
There are two cases here:
1. Chaos Monkey thread died and there is no chaos after that.
2. Sometimes, regions are being moved back too quick that region server has not finished its initliazation yet.
wait sometime to make sure that region server finishes its initialization.
Signed-off-by: Wellington Chevreuil <wellington.chevreuil@gmail.com>
This is no longer needed since we've transitioned to the shaded Jersey shipped in
hbase-thirdparty. Also drop supplemental models entry.
Signed-off-by: Duo Zhang <zhangduo@apache.org>
Signed-off-by: Andrew Purtell <apurtell@apache.org>
Avoid the pattern where a Random object is allocated, used once or twice, and
then left for GC. This pattern triggers warnings from some static analysis tools
because this pattern leads to poor effective randomness. In a few cases we were
legitimately suffering from this issue; in others a change is still good to
reduce noise in analysis results.
Use ThreadLocalRandom where there is no requirement to set the seed to gain
good reuse.
Where useful relax use of SecureRandom to simply Random or ThreadLocalRandom,
which are unlikely to block if the system entropy pool is low, if we don't need
crypographically strong randomness for the use case. The exception to this is
normalization of use of Bytes#random to fill byte arrays with randomness.
Because Bytes#random may be used to generate key material it must be backed by
SecureRandom.
Signed-off-by: Duo Zhang <zhangduo@apache.org>
The code starting at `ZKUtil.dump(ZKWatcher)` is a small mess – it has cyclic dependencies woven
through itself, `ZKWatcher` and `RecoverableZooKeeper`. It also initializes a static variable in
`ZKUtil` through the factory for `RecoverableZooKeeper` instances. Let's decouple and clean it
up.
Signed-off-by: Duo Zhang <zhangduo@apache.org>
Signed-off-by: Josh Elser <elserj@apache.org>
Use a hybrid logical clock for timestamping entries.
Using BufferedMutator without HLC was not good because we assign client timestamps,
and the store loop is fast enough that on rare occasion two temporally adjacent URLs
in the set of WARCs are equivalent and the timestamp does not advance, leading later
to a rare false positive CORRUPT finding.
While making changes, support direct S3N paths as input paths on the command line.
Signed-off-by: Viraj Jasani <vjasani@apache.org>
We introduced EnvironmentEdgeManager as a way to inject alternate clocks
for unit tests. In order for this to be effective, all callers that would
otherwise use System.currentTimeMillis() must call
EnvironmentEdgeManager.currentTime() instead, except the implementers of
EnvironmentEdge.
Signed-off-by: Bharath Vissapragada <bharathv@apache.org>
Signed-off-by: Duo Zhang <zhangduo@apache.org>
Signed-off-by: Viraj Jasani <vjasani@apache.org>
* HBASE-25867 Extra doc around ITBLL
Minor edits to a few log messages.
Explain how the '-c' option works when passed to ChaosMonkeyRunner.
Some added notes on ITBLL.
Fix whacky 'R' and 'Not r' thing in Master (shows when you run ITBLL).
In HRS, report hostname and port when it checks in (was debugging issue
where Master and HRS had different notions of its hostname).
Spare a dirty FNFException on startup if base dir not yet in place.
* Address Review by Sean
Signed-off-by: Sean Busbey <busbey@apache.org>
* HBASE-25824 IntegrationTestLoadCommonCrawl
This integration test loads successful resource retrieval records from
the Common Crawl (https://commoncrawl.org/) public dataset into an HBase
table and writes records that can be used to later verify the presence
and integrity of those records.
Run like:
./bin/hbase org.apache.hadoop.hbase.test.IntegrationTestLoadCommonCrawl \
-Dfs.s3n.awsAccessKeyId=<AWS access key> \
-Dfs.s3n.awsSecretAccessKey=<AWS secret key> \
/path/to/test-CC-MAIN-2021-10-warc.paths.gz \
/path/to/tmp/warc-loader-output
Access to the Common Crawl dataset in S3 is made available to anyone by
Amazon AWS, but Hadoop's S3N filesystem still requires valid access
credentials to initialize.
The input path can either specify a directory or a file. The file may
optionally be compressed with gzip. If a directory, the loader expects
the directory to contain one or more WARC files from the Common Crawl
dataset. If a file, the loader expects a list of Hadoop S3N URIs which
point to S3 locations for one or more WARC files from the Common Crawl
dataset, one URI per line. Lines should be terminated with the UNIX line
terminator.
Included in hbase-it/src/test/resources/CC-MAIN-2021-10-warc.paths.gz
is a list of all WARC files comprising the Q1 2021 crawl archive. There
are 64,000 WARC files in this data set, each containing ~1GB of gzipped
data. The WARC files contain several record types, such as metadata,
request, and response, but we only load the response record types. If
the HBase table schema does not specify compression (by default) there
is roughly a 10x expansion. Loading the full crawl archive results in a
table approximately 640 TB in size.
The hadoop-aws jar will be needed at runtime to instantiate the S3N
filesystem. Use the -files ToolRunner argument to add it.
You can also split the Loader and Verify stages:
Load with:
./bin/hbase 'org.apache.hadoop.hbase.test.IntegrationTestLoadCommonCrawl$Loader' \
-files /path/to/hadoop-aws.jar \
-Dfs.s3n.awsAccessKeyId=<AWS access key> \
-Dfs.s3n.awsSecretAccessKey=<AWS secret key> \
/path/to/test-CC-MAIN-2021-10-warc.paths.gz \
/path/to/tmp/warc-loader-output
Verify with:
./bin/hbase 'org.apache.hadoop.hbase.test.IntegrationTestLoadCommonCrawl$Verify' \
/path/to/tmp/warc-loader-output
Signed-off-by: Michael Stack <stack@apache.org>
IntegrationTestImportTsv is generating HFiles under the working directory of the
current hdfs user executing the tool, before bulkloading it into HBase.
Assuming you encrypt the HBase root directory within HDFS (using HDFS
Transparent Encryption), you can bulkload HFiles only if they sit in the same
encryption zone in HDFS as the HBase root directory itself.
When IntegrationTestImportTsv is executed against a real distributed cluster
and the working directory of the current user (e.g. /user/hbase) is not in the
same encryption zone as the HBase root directory (e.g. /hbase/data) then you
will get an exception:
```
ERROR org.apache.hadoop.hbase.regionserver.HRegion: There was a partial failure
due to IO when attempting to load d :
hdfs://mycluster/user/hbase/test-data/22d8460d-04cc-e032-88ca-2cc20a7dd01c/
IntegrationTestImportTsv/hfiles/d/74655e3f8da142cb94bc31b64f0475cc
org.apache.hadoop.ipc.RemoteException(java.io.IOException):
/user/hbase/test-data/22d8460d-04cc-e032-88ca-2cc20a7dd01c/
IntegrationTestImportTsv/hfiles/d/74655e3f8da142cb94bc31b64f0475cc
can't be moved into an encryption zone.
```
In this commit I make it configurable where the IntegrationTestImportTsv
generates the HFiles.
Co-authored-by: Mate Szalay-Beko <symat@apache.com>
Signed-off-by: Peter Somogyi <psomogyi@apache.org>
Nick Dimiduk
Duo Zhang
Andrew Purtell
Narasimha Sharma
huaxiangsun
BukrosSzabolcs
Wellington Ramos Chevreuil
Michael Stack
niuyulin
Pankaj
Mate Szalay-Beko
Lokesh Khurana
Joseph295